abstract in a master thesis

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

Prevent plagiarism, run a free check.

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 14 May 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

How to Write an Abstract for Your Thesis or Dissertation What is an Abstract? The abstract is an important component of your thesis. Presented at the beginning of the thesis, it is likely the first substantive description of your work read by an external examiner. You should view it as an opportunity to set accurate expectations. The abstract is a summary of the whole thesis. It presents all the major elements of your work in a highly condensed form. An abstract often functions, together with the thesis title, as a stand-alone text. Abstracts appear, absent the full text of the thesis, in bibliographic indexes such as PsycInfo. They may also be presented in announcements of the thesis examination. Most readers who encounter your abstract in a bibliographic database or receive an email announcing your research presentation will never retrieve the full text or attend the presentation. An abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there is insufficient time and space for the full text. Size and Structure Currently, the maximum sizes for abstracts submitted to Canada's National Archive are 150 words (Masters thesis) and 350 words (Doctoral dissertation). To preserve visual coherence, you may wish to limit the abstract for your doctoral dissertation to one double-spaced page, about 280 words. The structure of the abstract should mirror the structure of the whole thesis, and should represent all its major elements. For example, if your thesis has five chapters (introduction, literature review, methodology, results, conclusion), there should be one or more sentences assigned to summarize each chapter. Clearly Specify Your Research Questions As in the thesis itself, your research questions are critical in ensuring that the abstract is coherent and logically structured. They form the skeleton to which other elements adhere. They should be presented near the beginning of the abstract. There is only room for one to three questions. If there are more than three major research questions in your thesis, you should consider restructuring them by reducing some to subsidiary status. Don't Forget the Results The most common error in abstracts is failure to present results. The primary function of your thesis (and by extension your abstract) is not to tell readers what you did, it is to tell them what you discovered. Other information, such as the account of your research methods, is needed mainly to back the claims you make about your results. Approximately the last half of the abstract should be dedicated to summarizing and interpreting your results. Updated 2008.09.11 © John C. Nesbit

/images/cornell/logo35pt_cornell_white.svg" alt="abstract in a master thesis"> Cornell University --> Graduate School

Guide to writing your thesis/dissertation, definition of dissertation and thesis.

The dissertation or thesis is a scholarly treatise that substantiates a specific point of view as a result of original research that is conducted by students during their graduate study. At Cornell, the thesis is a requirement for the receipt of the M.A. and M.S. degrees and some professional master’s degrees. The dissertation is a requirement of the Ph.D. degree.

Formatting Requirement and Standards

The Graduate School sets the minimum format for your thesis or dissertation, while you, your special committee, and your advisor/chair decide upon the content and length. Grammar, punctuation, spelling, and other mechanical issues are your sole responsibility. Generally, the thesis and dissertation should conform to the standards of leading academic journals in your field. The Graduate School does not monitor the thesis or dissertation for mechanics, content, or style.

“Papers Option” Dissertation or Thesis

A “papers option” is available only to students in certain fields, which are listed on the Fields Permitting the Use of Papers Option page , or by approved petition. If you choose the papers option, your dissertation or thesis is organized as a series of relatively independent chapters or papers that you have submitted or will be submitting to journals in the field. You must be the only author or the first author of the papers to be used in the dissertation. The papers-option dissertation or thesis must meet all format and submission requirements, and a singular referencing convention must be used throughout.

ProQuest Electronic Submissions

The dissertation and thesis become permanent records of your original research, and in the case of doctoral research, the Graduate School requires publication of the dissertation and abstract in its original form. All Cornell master’s theses and doctoral dissertations require an electronic submission through ProQuest, which fills orders for paper or digital copies of the thesis and dissertation and makes a digital version available online via their subscription database, ProQuest Dissertations & Theses . For master’s theses, only the abstract is available. ProQuest provides worldwide distribution of your work from the master copy. You retain control over your dissertation and are free to grant publishing rights as you see fit. The formatting requirements contained in this guide meet all ProQuest specifications.

Copies of Dissertation and Thesis

Copies of Ph.D. dissertations and master’s theses are also uploaded in PDF format to the Cornell Library Repository, eCommons . A print copy of each master’s thesis and doctoral dissertation is submitted to Cornell University Library by ProQuest.

How to Write a Thesis: A Guide for Master’s Students

By Dr. David James Kritz   |  09/29/2023

Let’s face it. Researching and writing a quality thesis can be daunting for many reasons, including:

• A lack of knowledge on where to begin the assignment process
• What key arguments and questions to ask in relation to the thesis statement
• How to get to the data and subject matter
• How to cope with writer's block, a professor's expectations, and time constraints

According to Dictionary.com , a thesis is “a proposition stated or put forward for consideration, especially one to be discussed and proved or to be maintained against objections.”

Therefore, avoiding a weak thesis statement is vital when writing an applicable paper. Thesis statement examples are pivotal in understanding this position.

Currently, master’s students who select the thesis capstone within American Public University's School of Security and Global Studies intelligence master's degree program must choose a relevant subject.

Typically, these students must write a thesis statement that consists of at least one compelling sentence and at least 50 pages of content, then turn it in within 16 weeks.

I have taught graduate students, primarily from the U.S. Intelligence Community, how to conduct research for over eight years.

Based on my experience as an educator, I have 10 tips for creating good thesis statements. These tips, combined with some apt thesis statement examples, can elucidate the process.

Tip #1 for Effective Thesis Statements: Select an Appropriate Topic and Research Question

First, it is necessary to use a lengthy thinking process before developing a good thesis statement, whether it’s an expository thesis statement or an argumentative one. This process begins with many questions related to how to write a thesis statement, such as:

• What would be an interesting topic?
• What would be an original and interesting research question?
• What will be the main claim, key arguments, and central idea of the thesis statement?
• What is an appropriate research design?
• How will I get to the data to address my central research question?

Regardless of the thesis statement or topic, all research begins with a research question.

Without the right question, the analysis, literature review, and implications might miss their mark. This question should be unique, intriguing, and beyond a mere “yes” or “no” answer.

For instance, rather than asking, “Will Country X pursue nuclear proliferation?”, it's better to pose open-ended questions like, “How does…?” or “To what extent…?” Such an approach ensures nuanced and substantive answers.

Additionally, supplementary key questions should support the main research question's depth and intent.

Tip #2: Begin Work on the Thesis Statement and Break Up the Thesis into Manageable Sections

After selecting an appropriate topic and developing a central research question for the thesis statement, it is then necessary to apply the research and writing skills you have learned throughout your degree program.

It might be necessary to refine the thesis statement after some preliminary research; after all, you want a strong thesis statement rather than a weak thesis statement.

It is also essential to break up the thesis paper into manageable sections during the writing process. This strategy will help you to overcome the most common types of mental hurdle of creating a thesis paper that can be 50 or more pages in length.

For writing a thesis statement, this way of thinking is helpful before you begin writing. Instead of attempting to write every single sentence of a thesis statement in one long stretch, you can work on one section at a time, turn it in for review and work on the next section of the thesis statement while awaiting feedback.

Tip #3: Pay Attention to Your Professor's Feedback about Your Assignment

When I give my essay assignment to my students with advice on how to write a thesis, I also explain the importance of a strong thesis statement.

I advise them to avoid becoming emotionally attached to the thesis. That emotional attachment can lead to a battle of wills and wits with the capstone course's professor over the thesis statement examples they present.

When it comes to implementing feedback, revisions to the thesis paper often need to occur. Faculty members are there to help guide you and assist you in the production of a good-quality, argumentative thesis statement that will provide new insights for the reader.

Just go with the feedback you receive from your instructor as you write a sentence, or more, and move on to complete your thesis paper more efficiently.

Tip #4: Complete an Abstract

The abstract of a thesis is vital, so it must be carefully crafted. The abstract may be the only section of a published, scholarly paper or article that someone may take the time to read, based on their time constraints and interest.

Ideally, the abstract should be 250 words or less and must contain the main point of the paper. I advise students drafting an abstract for scholarly journal editors to ensure that the abstract has these elements:

An introductory sentence

A “hook” (why the reader should care about the thesis statement or its topic and to motivate the reader to look at your paper)

The central research question to show the main point of your paper

The research design – how you collected evidence to support your arguments

The results and implications, such as the negative and positive aspects of your main topic and the broader context of your research

Tip #5: Write the Literature Review

When crafting a literature review, incorporate multiple peer-reviewed articles from academic sources like ProQuest and EBSCOHost. Opt for articles frequently cited in other works to enhance your paper's credibility.

The review examines arguments in thesis statements and their counterarguments from scholarly works. For clear discussions, organize your review thematically, showing topic synthesis and your position. This reduces confusion.

For example, if 40 articles discuss open-source intelligence and seven focus on social media, that could be a central theme.

Rather than just listing articles, create broader themes and keep synthesizing. When crafting the thesis, evaluate each paragraph's relevance to the main research question. I advise students to assess the “So what?” factor. If a paragraph isn't pertinent, it might be best to remove it.

Tip #6: Develop a Theoretical Framework within Your Thesis Statement

Theories in theses are often mishandled, reflecting a student’s unclear grasp. Academic theory goes beyond mere "I have a theory" statements and leans on robust, time-tested frameworks.

For instance, a strategic intelligence studies thesis statement might employ national security theory or national defense theory. This theory should align with the thesis's central question.

For example, if probing how Country X uses social media for misinformation, a student might be directed to the communication theory, which aligns well with the study's main topic and question.

Tip #7: Select a Research Design

Before conducting research, students must devise a strategy to address their central question. The research design is their roadmap for data collection. This encompasses methodology, methods, and data gathering instruments like surveys or interviews. Research on humans requires IRB approval, which I advise against due to time constraints in a 16-week paper cycle. Additionally, it's vital to distinguish between “methodology” and “methods,” terms often mistakenly used interchangeably.

Methodology involves the justification of the how and why a research method was selected to address the central research question , according to Indeed. The three primary methodologies include:

• Qualitative methodology
• Quantitative methodology
• Mixed methods

“Mixed methods” involves a researcher’s use of at least one research method from a qualitative methodology and another research method from a quantitative methodology, then explaining how those methods will be integrated into a study.

But if two methods from the same methodology are used in a study, that is referred to as a multi-method approach. An example of a multi-method approach would be using a comparative case study as the first qualitative research method and process tracing as the second research method.

Research methods are linked to either qualitative or quantitative methodologies. They focus on “what” a researcher selected to interpret data.

Research method types include:

• Archival records
• Alternative futures
• Case studies
• Comparative case studies
• Content analysis
• Correlational research
• Descriptive research
• Ethnography
• Experimental research
• Phenomenology
• Process tracing

Tip #8: Write about Research Findings and Data

After gathering data for a thesis, analyzing its significance is crucial, with methods including coding. While qualitative methodology doesn't aim to prove anything, unlike the quantitative approach which tests hypotheses, it can discuss correlations, causation, and delve into theoretical implications in data.

Some may view qualitative research as subjective, but selecting variables in quantitative research has its subjectivity too. Ultimately, it's essential to adhere closely to the scientific method, rather than relying on opinions or claims without concrete evidence.

Tip #9: Consider How Bias Will Affect Your Thesis Statement

When writing thesis statements, it is necessary to consider how bias will affect your writing and your reader. Being 100% objective is an admirable goal, but it is impossible to avoid biases as we are human beings.

All of us have biases, including latent ones. At best, we can mitigate biases, such as using coding software, but never holistically remove bias. As researchers, we just need to be aware of biases and develop strategies to mitigate them.

Tip #10: Be Aware of the Limitations of a Study

The study's limitations section is a pivotal part of a thesis. It highlights the research's shortcomings and indicates what might be done differently.

For instance, a student may mention a 16-week time constraint or contemplate a different research design or question.

This section not only helps students recognize how to enhance their research but also guides future scholars. They can learn from prior omissions or envision alternative research avenues.

• Call: 877-755-2787
• Email: [email protected]
• Chat: Live Chat

Dissertation Structure & Layout 101: How to structure your dissertation, thesis or research project.

By: Derek Jansen (MBA) Reviewed By: David Phair (PhD) | July 2019

So, you’ve got a decent understanding of what a dissertation is , you’ve chosen your topic and hopefully you’ve received approval for your research proposal . Awesome! Now its time to start the actual dissertation or thesis writing journey.

To craft a high-quality document, the very first thing you need to understand is dissertation structure . In this post, we’ll walk you through the generic dissertation structure and layout, step by step. We’ll start with the big picture, and then zoom into each chapter to briefly discuss the core contents. If you’re just starting out on your research journey, you should start with this post, which covers the big-picture process of how to write a dissertation or thesis .

*The Caveat *

In this post, we’ll be discussing a traditional dissertation/thesis structure and layout, which is generally used for social science research across universities, whether in the US, UK, Europe or Australia. However, some universities may have small variations on this structure (extra chapters, merged chapters, slightly different ordering, etc).

So, always check with your university if they have a prescribed structure or layout that they expect you to work with. If not, it’s safe to assume the structure we’ll discuss here is suitable. And even if they do have a prescribed structure, you’ll still get value from this post as we’ll explain the core contents of each section.  

Overview: S tructuring a dissertation or thesis

• Acknowledgements page
• Abstract (or executive summary)
• Table of contents , list of figures and tables
• Chapter 1: Introduction
• Chapter 2: Literature review
• Chapter 3: Methodology
• Chapter 4: Results
• Chapter 5: Discussion
• Chapter 6: Conclusion
• Reference list

As I mentioned, some universities will have slight variations on this structure. For example, they want an additional “personal reflection chapter”, or they might prefer the results and discussion chapter to be merged into one. Regardless, the overarching flow will always be the same, as this flow reflects the research process , which we discussed here – i.e.:

• The introduction chapter presents the core research question and aims .
• The literature review chapter assesses what the current research says about this question.
• The methodology, results and discussion chapters go about undertaking new research about this question.
• The conclusion chapter (attempts to) answer the core research question .

In other words, the dissertation structure and layout reflect the research process of asking a well-defined question(s), investigating, and then answering the question – see below.

To restate that – the structure and layout of a dissertation reflect the flow of the overall research process . This is essential to understand, as each chapter will make a lot more sense if you “get” this concept. If you’re not familiar with the research process, read this post before going further.

Right. Now that we’ve covered the big picture, let’s dive a little deeper into the details of each section and chapter. Oh and by the way, you can also grab our free dissertation/thesis template here to help speed things up.

The title page of your dissertation is the very first impression the marker will get of your work, so it pays to invest some time thinking about your title. But what makes for a good title? A strong title needs to be 3 things:

• Succinct (not overly lengthy or verbose)
• Specific (not vague or ambiguous)
• Representative of the research you’re undertaking (clearly linked to your research questions)

Typically, a good title includes mention of the following:

• The broader area of the research (i.e. the overarching topic)
• The specific focus of your research (i.e. your specific context)
• Indication of research design (e.g. quantitative , qualitative , or  mixed methods ).

For example:

A quantitative investigation [research design] into the antecedents of organisational trust [broader area] in the UK retail forex trading market [specific context/area of focus].

Again, some universities may have specific requirements regarding the format and structure of the title, so it’s worth double-checking expectations with your institution (if there’s no mention in the brief or study material).

Acknowledgements

This page provides you with an opportunity to say thank you to those who helped you along your research journey. Generally, it’s optional (and won’t count towards your marks), but it is academic best practice to include this.

So, who do you say thanks to? Well, there’s no prescribed requirements, but it’s common to mention the following people:

• Your dissertation supervisor or committee.
• Any professors, lecturers or academics that helped you understand the topic or methodologies.
• Any tutors, mentors or advisors.
• Your family and friends, especially spouse (for adult learners studying part-time).

There’s no need for lengthy rambling. Just state who you’re thankful to and for what (e.g. thank you to my supervisor, John Doe, for his endless patience and attentiveness) – be sincere. In terms of length, you should keep this to a page or less.

Abstract or executive summary

The dissertation abstract (or executive summary for some degrees) serves to provide the first-time reader (and marker or moderator) with a big-picture view of your research project. It should give them an understanding of the key insights and findings from the research, without them needing to read the rest of the report – in other words, it should be able to stand alone .

For it to stand alone, your abstract should cover the following key points (at a minimum):

• Your research questions and aims – what key question(s) did your research aim to answer?
• Your methodology – how did you go about investigating the topic and finding answers to your research question(s)?
• Your findings – following your own research, what did do you discover?
• Your conclusions – based on your findings, what conclusions did you draw? What answers did you find to your research question(s)?

So, in much the same way the dissertation structure mimics the research process, your abstract or executive summary should reflect the research process, from the initial stage of asking the original question to the final stage of answering that question.

In practical terms, it’s a good idea to write this section up last , once all your core chapters are complete. Otherwise, you’ll end up writing and rewriting this section multiple times (just wasting time). For a step by step guide on how to write a strong executive summary, check out this post .

Need a helping hand?

Table of contents

This section is straightforward. You’ll typically present your table of contents (TOC) first, followed by the two lists – figures and tables. I recommend that you use Microsoft Word’s automatic table of contents generator to generate your TOC. If you’re not familiar with this functionality, the video below explains it simply:

If you find that your table of contents is overly lengthy, consider removing one level of depth. Oftentimes, this can be done without detracting from the usefulness of the TOC.

Right, now that the “admin” sections are out of the way, its time to move on to your core chapters. These chapters are the heart of your dissertation and are where you’ll earn the marks. The first chapter is the introduction chapter – as you would expect, this is the time to introduce your research…

It’s important to understand that even though you’ve provided an overview of your research in your abstract, your introduction needs to be written as if the reader has not read that (remember, the abstract is essentially a standalone document). So, your introduction chapter needs to start from the very beginning, and should address the following questions:

• What will you be investigating (in plain-language, big picture-level)?
• Why is that worth investigating? How is it important to academia or business? How is it sufficiently original?
• What are your research aims and research question(s)? Note that the research questions can sometimes be presented at the end of the literature review (next chapter).
• What is the scope of your study? In other words, what will and won’t you cover ?
• How will you approach your research? In other words, what methodology will you adopt?
• How will you structure your dissertation? What are the core chapters and what will you do in each of them?

These are just the bare basic requirements for your intro chapter. Some universities will want additional bells and whistles in the intro chapter, so be sure to carefully read your brief or consult your research supervisor.

If done right, your introduction chapter will set a clear direction for the rest of your dissertation. Specifically, it will make it clear to the reader (and marker) exactly what you’ll be investigating, why that’s important, and how you’ll be going about the investigation. Conversely, if your introduction chapter leaves a first-time reader wondering what exactly you’ll be researching, you’ve still got some work to do.

Now that you’ve set a clear direction with your introduction chapter, the next step is the literature review . In this section, you will analyse the existing research (typically academic journal articles and high-quality industry publications), with a view to understanding the following questions:

• What does the literature currently say about the topic you’re investigating?
• Is the literature lacking or well established? Is it divided or in disagreement?
• How does your research fit into the bigger picture?
• How does your research contribute something original?
• How does the methodology of previous studies help you develop your own?

Depending on the nature of your study, you may also present a conceptual framework towards the end of your literature review, which you will then test in your actual research.

Again, some universities will want you to focus on some of these areas more than others, some will have additional or fewer requirements, and so on. Therefore, as always, its important to review your brief and/or discuss with your supervisor, so that you know exactly what’s expected of your literature review chapter.

Now that you’ve investigated the current state of knowledge in your literature review chapter and are familiar with the existing key theories, models and frameworks, its time to design your own research. Enter the methodology chapter – the most “science-ey” of the chapters…

In this chapter, you need to address two critical questions:

• Exactly HOW will you carry out your research (i.e. what is your intended research design)?
• Exactly WHY have you chosen to do things this way (i.e. how do you justify your design)?

Remember, the dissertation part of your degree is first and foremost about developing and demonstrating research skills . Therefore, the markers want to see that you know which methods to use, can clearly articulate why you’ve chosen then, and know how to deploy them effectively.

Importantly, this chapter requires detail – don’t hold back on the specifics. State exactly what you’ll be doing, with who, when, for how long, etc. Moreover, for every design choice you make, make sure you justify it.

In practice, you will likely end up coming back to this chapter once you’ve undertaken all your data collection and analysis, and revise it based on changes you made during the analysis phase. This is perfectly fine. Its natural for you to add an additional analysis technique, scrap an old one, etc based on where your data lead you. Of course, I’m talking about small changes here – not a fundamental switch from qualitative to quantitative, which will likely send your supervisor in a spin!

You’ve now collected your data and undertaken your analysis, whether qualitative, quantitative or mixed methods. In this chapter, you’ll present the raw results of your analysis . For example, in the case of a quant study, you’ll present the demographic data, descriptive statistics, inferential statistics , etc.

Typically, Chapter 4 is simply a presentation and description of the data, not a discussion of the meaning of the data. In other words, it’s descriptive, rather than analytical – the meaning is discussed in Chapter 5. However, some universities will want you to combine chapters 4 and 5, so that you both present and interpret the meaning of the data at the same time. Check with your institution what their preference is.

Now that you’ve presented the data analysis results, its time to interpret and analyse them. In other words, its time to discuss what they mean, especially in relation to your research question(s).

What you discuss here will depend largely on your chosen methodology. For example, if you’ve gone the quantitative route, you might discuss the relationships between variables . If you’ve gone the qualitative route, you might discuss key themes and the meanings thereof. It all depends on what your research design choices were.

Most importantly, you need to discuss your results in relation to your research questions and aims, as well as the existing literature. What do the results tell you about your research questions? Are they aligned with the existing research or at odds? If so, why might this be? Dig deep into your findings and explain what the findings suggest, in plain English.

The final chapter – you’ve made it! Now that you’ve discussed your interpretation of the results, its time to bring it back to the beginning with the conclusion chapter . In other words, its time to (attempt to) answer your original research question s (from way back in chapter 1). Clearly state what your conclusions are in terms of your research questions. This might feel a bit repetitive, as you would have touched on this in the previous chapter, but its important to bring the discussion full circle and explicitly state your answer(s) to the research question(s).

Next, you’ll typically discuss the implications of your findings . In other words, you’ve answered your research questions – but what does this mean for the real world (or even for academia)? What should now be done differently, given the new insight you’ve generated?

Lastly, you should discuss the limitations of your research, as well as what this means for future research in the area. No study is perfect, especially not a Masters-level. Discuss the shortcomings of your research. Perhaps your methodology was limited, perhaps your sample size was small or not representative, etc, etc. Don’t be afraid to critique your work – the markers want to see that you can identify the limitations of your work. This is a strength, not a weakness. Be brutal!

This marks the end of your core chapters – woohoo! From here on out, it’s pretty smooth sailing.

The reference list is straightforward. It should contain a list of all resources cited in your dissertation, in the required format, e.g. APA , Harvard, etc.

It’s essential that you use reference management software for your dissertation. Do NOT try handle your referencing manually – its far too error prone. On a reference list of multiple pages, you’re going to make mistake. To this end, I suggest considering either Mendeley or Zotero. Both are free and provide a very straightforward interface to ensure that your referencing is 100% on point. I’ve included a simple how-to video for the Mendeley software (my personal favourite) below:

Some universities may ask you to include a bibliography, as opposed to a reference list. These two things are not the same . A bibliography is similar to a reference list, except that it also includes resources which informed your thinking but were not directly cited in your dissertation. So, double-check your brief and make sure you use the right one.

The very last piece of the puzzle is the appendix or set of appendices. This is where you’ll include any supporting data and evidence. Importantly, supporting is the keyword here.

Your appendices should provide additional “nice to know”, depth-adding information, which is not critical to the core analysis. Appendices should not be used as a way to cut down word count (see this post which covers how to reduce word count ). In other words, don’t place content that is critical to the core analysis here, just to save word count. You will not earn marks on any content in the appendices, so don’t try to play the system!

Time to recap…

And there you have it – the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows:

• Acknowledgments page

Most importantly, the core chapters should reflect the research process (asking, investigating and answering your research question). Moreover, the research question(s) should form the golden thread throughout your dissertation structure. Everything should revolve around the research questions, and as you’ve seen, they should form both the start point (i.e. introduction chapter) and the endpoint (i.e. conclusion chapter).

I hope this post has provided you with clarity about the traditional dissertation/thesis structure and layout. If you have any questions or comments, please leave a comment below, or feel free to get in touch with us. Also, be sure to check out the rest of the  Grad Coach Blog .

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

36 Comments

many thanks i found it very useful

Glad to hear that, Arun. Good luck writing your dissertation.

Such clear practical logical advice. I very much needed to read this to keep me focused in stead of fretting.. Perfect now ready to start my research!

what about scientific fields like computer or engineering thesis what is the difference in the structure? thank you very much

Thanks so much this helped me a lot!

Very helpful and accessible. What I like most is how practical the advice is along with helpful tools/ links.

Thanks Ade!

Thank you so much sir.. It was really helpful..

You’re welcome!

Hi! How many words maximum should contain the abstract?

Thank you so much 😊 Find this at the right moment

You’re most welcome. Good luck with your dissertation.

best ever benefit i got on right time thank you

Many times Clarity and vision of destination of dissertation is what makes the difference between good ,average and great researchers the same way a great automobile driver is fast with clarity of address and Clear weather conditions .

I guess Great researcher = great ideas + knowledge + great and fast data collection and modeling + great writing + high clarity on all these

You have given immense clarity from start to end.

Morning. Where will I write the definitions of what I’m referring to in my report?

Thank you so much Derek, I was almost lost! Thanks a tonnnn! Have a great day!

Thanks ! so concise and valuable

This was very helpful. Clear and concise. I know exactly what to do now.

Thank you for allowing me to go through briefly. I hope to find time to continue.

Really useful to me. Thanks a thousand times

Very interesting! It will definitely set me and many more for success. highly recommended.

Thank you soo much sir, for the opportunity to express my skills

Usefull, thanks a lot. Really clear

Very nice and easy to understand. Thank you .

That was incredibly useful. Thanks Grad Coach Crew!

My stress level just dropped at least 15 points after watching this. Just starting my thesis for my grad program and I feel a lot more capable now! Thanks for such a clear and helpful video, Emma and the GradCoach team!

Do we need to mention the number of words the dissertation contains in the main document?

It depends on your university’s requirements, so it would be best to check with them 🙂

Such a helpful post to help me get started with structuring my masters dissertation, thank you!

Great video; I appreciate that helpful information

It is so necessary or avital course

This blog is very informative for my research. Thank you

Doctoral students are required to fill out the National Research Council’s Survey of Earned Doctorates

wow this is an amazing gain in my life

This is so good

How can i arrange my specific objectives in my dissertation?

Trackbacks/Pingbacks

• What Is A Literature Review (In A Dissertation Or Thesis) - Grad Coach - […] is to write the actual literature review chapter (this is usually the second chapter in a typical dissertation or…

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 412 other subscribers.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

You may also like

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.
• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.
• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.
• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.
• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.
• Informative
• Descriptive
• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

What Is a Dissertation Abstract?

Purpose of a dissertation or thesis abstract, what makes a good abstract for a dissertation, how long should a dissertation abstract be, dissertation abstract structure, things to consider before writing a dissertation abstract, write an abstract for a dissertation last, carefully read requirements, choose the right type of dissertation abstracts, how to write an abstract for a dissertation or thesis, 1. identify the purpose of your study, 2. discuss methodology, 3. describe the key results, 4. summarize an abstract for a dissertation, how to format an abstract in dissertation, keywords in a dissertation abstract, thesis and dissertation abstract examples, extra tips on writing a dissertation abstract, bottom line on how to write a dissertation or thesis abstract.

What is a dissertation abstract and how do I write one for my PhD?

Feb 12, 2019

There are a lot of posts that talk about how to write an abstract. Most say that you should write your abstract to impress your examiner.

We say that you need to flip things upside down: sure, your examiner will read it and want to see that you’ve written it well, but you should actually have your next boss in mind when you write it.

When you apply for your first academic job, the abstract may be the only part of your thesis that your new boss will read. They may not have the time or energy to read the whole thesis, so the abstract plays a crucial role. You should write it as if you academic career depends on it.

In this guide we talk about how to write an outstanding abstract that will (hopefully) land you a job.

If you haven’t already, make sure you download our PhD Writing Template , which you can use in conjunction with this guide to supercharge your PhD.

What is an abstract?

  This is fairly straightforward stuff, but let us be clear so we are all on the same page.

An abstract is a short summary at the beginning of the PhD that sums up the research, summarises the separate sections of the thesis and outlines the contribution.

It is typically used by those wishing to get a broad understanding of a piece of research prior to reading the entire thesis.

When you apply for your first academic job, the hiring manager will take a look through applicants’ abstracts (as well as your CV and covering letter) to create a shortlist. If you are lucky enough to do well at an interview, your potential new boss will take another look through it before deciding whether to offer you the job.

Why don’t they read the whole thing? Apart from the fact that they’re way too busy to read 200+ pages, a well written abstract actually contains all they need to know. It is a way of letting them see what your research is about, what contribution it makes, what your understanding of the field is and how or whether you will fit into the department.

So, you need to write it well.

But, don’t underestimate how hard it is to write a PhD thesis abstract. You have to condense hundred of pages and years of work into a few hundred words (exactly how many will depend on your university, so double check with them before you start writing).

How do I write a good PhD abstract?

Some blog posts use keywords to summarise the content (this one does, scroll down to see them). The abstract is similar. It’s an extended set of keywords to summarise a complex piece of research.

Above all, your PhD abstract should answer the question: ‘so what’ ? In other words, what is the contribution of your thesis to the field?

If you’ve been using our PhD writing template you’ll know that, to do this, your abstract should address six questions:

• What is the reason for writing the thesis?
• What are the current approaches and gaps in the literature?
• What are your research question(s) and aims?
• Which methodology have you used?
• What are the main findings?
• What are the main conclusions and implications?

One thing that should be obvious is that you can’t write your abstract until the study itself has been written. It’ll typically be the last thing you write (alongside the acknowledgements).

But how can I write a great one?

  The tricky thing about writing a great PhD abstract is that you haven’t got much space to answer the six questions above. There are a few things to consider though that will help to elevate your writing and make your abstract as efficient as possible:

• Give a good first impression by writing in short clear sentences
• Don’t repeat the title in the abstract
• Don’t cite references
• Use keywords from the document
• Respect the word limit
• Don’t be vague – the abstract should be a self contained summary of the research, so don’t introduce ambiguous words or complex terms
• Focus on just four or five essential points, concepts, or findings. Don’t, for example, try to explain your entire theoretical framework
• Edit it carefully. Make sure every word is relevant (you haven’t got room for wasted words) and that each sentence has maximum impact
• Avoid lengthy background information
• Don’t mention anything that isn’t discussed in the thesis
• Avoid overstatements
• Don’t spin your findings, contribution or significance to make your research sound grander or more influential that it actually is

Examples of a good and bad abstract

We can see that the bad abstract fails to answer the six questions posed above. It reads more like a PhD proposal, rather than a summary of a piece of research.

Specifically:

• It doesn’t discuss the reason why the thesis was written
• It doesn’t outline the gaps in the literature
• It doesn’t outline the research questions or aims
• It doesn’t discuss the methods
• It doesn’t discuss the findings
• It doesn’t discuss the conclusions and implications of the research.

It is also too short, lacks adequate keywords and introduces unnecessary detail. The abbreviations and references only serve to confuse the reader and the claim that the thesis will ‘develop a new theory of climate change’ is both vague and over-ambitious. The reader will see through this.

The good abstract though does a much better job at answering the six questions and summarising the research.

• The reason why the thesis was written is stated: ‘We do so to better enable policy makers and academics to understand the nuances of multi-level climate governance’ and….’it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’
• The gap is clearly defined: ‘The theory has neglected to account for the role of local governments.’
• The research question are laid out: ‘We ask to what extent and in what ways local governments in the UK’…
• The methods are hinted at: ‘Using a case study…’
• The findings are summarised: ‘We show that local governments are both implementers and interpreters of policy. We also show that they make innovative contributions to and influence the direction of national policy.’
• The conclusions and implications are clear: ‘The significance of this study is that it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’

This abstract is of a much better length, and it fully summarises what the thesis is about. We can see that if someone (i.e. your hiring manager) were to read just this abstract, they’d understand what your thesis is about and the contribution that it makes.

Your PhD thesis. All on one page. 

Use our free PhD structure template to quickly visualise every element of your thesis. 

I can’t summarise my thesis, what do I do?

  We suggest you fill out our PhD Writing Template . We’ve designed it so that you can visualise your PhD on one page and easily see the main components. It’s really easy to use. It asks you a few questions related to each section of your thesis. As you answer them, you develop a synopsis. You can use that synopsis to inform your abstract. If you haven’t downloaded it, you can find it here.

  Like everything related to writing, it takes practice before you get great at writing abstracts. Follow our tips and you’ll have a head start over others.

Remember, you’re not writing your abstract for anyone other than your hiring manager. Make sure it showcases the best of your research and shows your skills as both a researcher and a writer.

If you’re struggling, send us your abstract by email and we’ll have give you free advice on how to improve it.

Hello, Doctor…

Sounds good, doesn’t it?  Be able to call yourself Doctor sooner with our five-star rated How to Write A PhD email-course. Learn everything your supervisor should have taught you about planning and completing a PhD.

Now half price. Join hundreds of other students and become a better thesis writer, or your money back. 

Share this:

Hello! I am a first year PhD student and I am interested in your Thesis writing course. However, I don’t have Paypal, thus I would like to know if there is an alternative way for you to get paid. I hope so, because I have been “following” you and I think the course can be really useful for me 🙂 Hope to hear from you soon. Best wishes, Belén Merelas

Thanks for the comment – I have sent you an email.

Hello! I am a Master’s student and I have applied for a PhD position. The professors have asked me to write a short abstract-like text, based on a brief sentence they will send me, related to the project study. How am I supposed to write a text like that when I don’t have the whole paper, the methods, results etc? Thank you in advance!

Hi Maria. I’m afraid that without knowing more about your topic or subject I am unable to give you advice on this. Sorry I can’t help in the way you may have hoped.

Thank u so much… your tips have really helped me to broaden my scope on the idea of how to write an abstract for my Ph.D. course. This is so thoughtful of you… The article is very informative and helpful…Thanks again!

I’m so pleased. Thanks for your lovely words. They’re music to my ears.

Very insightful Thanks

Glad you think so. Good luck with the writing.

Thank you so much Doc

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Search The PhD Knowledge Base

Most popular articles from the phd knowlege base.

The PhD Knowledge Base Categories

• Your PhD and Covid
• Mastering your theory and literature review chapters
• How to structure and write every chapter of the PhD
• How to stay motivated and productive
• Techniques to improve your writing and fluency
• Advice on maintaining good mental health
• Resources designed for non-native English speakers
• PhD Writing Template
• Explore our back-catalogue of motivational advice

Thesis and Dissertation Guide

• « Thesis & Dissertation Resources
• The Graduate School Home

• Introduction

Copyright Page

Dedication, acknowledgements, preface (optional), table of contents.

• List of Tables, Figures, and Illustrations

List of Abbreviations

List of symbols.

• Non-Traditional Formats
• Font Type and Size
• Spacing and Indentation
• Tables, Figures, and Illustrations
• Formatting Previously Published Work
• Internet Distribution
• Open Access
• Registering Copyright
• Using Copyrighted Materials
• Use of Your Own Previously Published Materials
• Submission Steps
• Submission Checklist
• Sample Pages

I. Order and Components

Please see the sample thesis or dissertation pages throughout and at the end of this document for illustrations. The following order is required for components of your thesis or dissertation:

• Dedication, Acknowledgements, and Preface (each optional)
• Table of Contents, with page numbers
• List of Tables, List of Figures, or List of Illustrations, with titles and page numbers (if applicable)
• List of Abbreviations (if applicable)
• List of Symbols (if applicable)
• Introduction, if any
• Main body, with consistent subheadings as appropriate
• Appendices (if applicable)
• Endnotes (if applicable)
• References (see section on References for options)

Many of the components following the title and copyright pages have required headings and formatting guidelines, which are described in the following sections.

Please consult the Sample Pages to compare your document to the requirements. A Checklist is provided to assist you in ensuring your thesis or dissertation meets all formatting guidelines.

The title page of a thesis or dissertation must include the following information:

• The title of the thesis or dissertation in all capital letters and centered 2″ below the top of the page.
• Your name, centered 1″ below the title. Do not include titles, degrees, or identifiers. The name you use here does not need to exactly match the name on your university records, but we recommend considering how you will want your name to appear in professional publications in the future.

Notes on this statement:

• When indicating your degree in the second bracketed space, use the full degree name (i.e., Doctor of Philosophy, not Ph.D. or PHD; Master of Public Health, not M.P.H. or MPH; Master of Social Work, not M.S.W. or MSW).
• List your department, school, or curriculum rather than your subject area or specialty discipline in the third bracketed space. You may include your subject area or specialty discipline in parentheses (i.e., Department of Romance Languages (French); School of Pharmacy (Molecular Pharmaceutics); School of Education (School Psychology); or similar official area).
• If you wish to include both your department and school names, list the school at the end of the statement (i.e., Department of Pharmacology in the School of Medicine).
• A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Public Policy.
• A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the School of Dentistry (Endodontics).
• A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the Department of Nutrition in the Gillings School of Global Public Health.
• A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the School of Education (Cultural Studies and Literacies).
• The words “Chapel Hill” must be centered 1″ below the statement.
• One single-spaced line below that, center the year in which your committee approves the completed thesis or dissertation. This need not be the year you graduate.
• Approximately 2/3 of the way across the page on the right-hand side of the page, 1″ below the year, include the phrase “Approved by:” (with colon) followed by each faculty member's name on subsequent double-spaced lines. Do not include titles such as Professor, Doctor, Dr., PhD, or any identifiers such as “chair” or “advisor” before or after any names. Line up the first letter of each name on the left under the “A” in the “Approved by:” line. If a name is too long to fit on one line, move this entire section of text slightly to the left so that formatting can be maintained.
• No signatures, signature lines, or page numbers should be included on the title page.

Include a copyright page with the following information single-spaced and centered 2″ above the bottom of the page:

© Year Author's Full Name (as it appears on the title page) ALL RIGHTS RESERVED

This page immediately follows the title page. It should be numbered with the lower case Roman numeral ii centered with a 1/2″ margin from the bottom edge.

Inclusion of this page offers you, as the author, additional protection against copyright infringement as it eliminates any question of authorship and copyright ownership. You do not need to file for copyright in order to include this statement in your thesis or dissertation. However, filing for copyright can offer other protections.

See Section IV for more information on copyrighting your thesis or dissertation.

Include an abstract page following these guidelines:

• Include the heading “ABSTRACT” in all capital letters, and center it 2″ below the top of the page.
• One double-spaced line below “ABSTRACT”, center your name, followed by a colon and the title of the thesis or dissertation. Use as many lines as necessary. Be sure that your name and the title exactly match the name and title used on the Title page.
• One single-spaced line below the title, center the phrase “(Under the direction of [advisor's name])”. Include the phrase in parentheses. Include the first and last name(s) of your advisor or formal co-advisors. Do not include the name of other committee members. Use the advisor's name only; do not include any professional titles such as PhD, Professor, or Dr. or any identifiers such as “chair” or “advisor”.
• Skip one double-spaced line and begin the abstract. The text of your abstract must be double-spaced and aligned with the document's left margin with the exception of indenting new paragraphs. Do not center or right-justify the abstract.
• Abstracts cannot exceed 150 words for a thesis or 350 words for a dissertation.
• Number the abstract page with the lower case Roman numeral iii (and iv, if more than one page) centered with a 1/2″ margin from the bottom edge.

Please write and proofread your abstract carefully. When possible, avoid including symbols or foreign words in your abstract, as they cannot be indexed or searched. Avoid mathematical formulas, diagrams, and other illustrative materials in the abstract. Offer a brief description of your thesis or dissertation and a concise summary of its conclusions. Be sure to describe the subject and focus of your work with clear details and avoid including lengthy explanations or opinions.

Your title and abstract will be used by search engines to help potential audiences locate your work, so clarity will help to draw the attention of your targeted readers.

You have an option to include a dedication, acknowledgements, or preface. If you choose to include any or all of these elements, give each its own page(s).

A dedication is a message from the author prefixed to a work in tribute to a person, group, or cause. Most dedications are short statements of tribute beginning with “To…” such as “To my family”.

Acknowledgements are the author's statement of gratitude to and recognition of the people and institutions that helped the author's research and writing.

A preface is a statement of the author's reasons for undertaking the work and other personal comments that are not directly germane to the materials presented in other sections of the thesis or dissertation. These reasons tend to be of a personal nature.

Any of the pages must be prepared following these guidelines:

• Do not place a heading on the dedication page.
• The text of short dedications must be centered and begin 2″ from the top of the page.
• Headings are required for the “ACKNOWLEDGEMENTS” and “PREFACE” pages. Headings must be in all capital letters and centered 2″ below the top of the page.
• The text of the acknowledgements and preface pages must begin one double-spaced line below the heading, be double-spaced, and be aligned with the document's left margin with the exception of indenting new paragraphs.
• Subsequent pages of text return to the 1″ top margin.
• The page(s) must be numbered with consecutive lower case Roman numerals (starting with the page number after the abstract) centered with a 1/2″ margin from the bottom edge.

Include a table of contents following these guidelines:

• Include the heading “TABLE OF CONTENTS” in all capital letters, and center it 2″ below the top of the page.
• Include one double-spaced line between the heading and the first entry.
• The table of contents should not contain listings for the pages that precede it, but it must list all parts of the thesis or dissertation that follow it.
• If relevant, be sure to list all appendices and a references section in your table of contents. Include page numbers for these items but do not assign separate chapter numbers.
• Entries must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• Major subheadings within chapters must be included in the table of contents. The subheading(s) should be indented to the right of the left page margin using consistent tabs.
• If an entry takes up more than one line, break up the entry about three-fourths of the way across the page and place the rest of the text on a second line, single-spacing the two lines.
• Include one double-spaced line between each entry.
• Page numbers listed in the table of contents must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
• Information included in the table of contents must match the headings, major subheadings, and numbering used in the body of the thesis or dissertation.
• The Table of Contents page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

Lists of Tables, Figures, and Illustrations

If applicable, include a list of tables, list of figures, and/or list of illustrations following these guidelines:

• Include the heading(s) in all capital letters, centered 1″ below the top of the page.
• Each entry must include a number, title, and page number.
• Assign each table, figure, or illustration in your thesis or dissertation an Arabic numeral. You may number consecutively throughout the entire work (e.g., Figure 1, Figure 2, etc.), or you may assign a two-part Arabic numeral with the first number designating the chapter in which it appears, separated by a period, followed by a second number to indicate its consecutive placement in the chapter (e.g., Table 3.2 is the second table in Chapter Three).
• Numerals and titles must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• Page numbers must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
• Numbers, titles, and page numbers must each match the corresponding numbers, titles, and page numbers appearing in the thesis or dissertation.
• All Lists of Tables, Figures, and Illustrations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use abbreviations extensively in your thesis or dissertation, you must include a list of abbreviations and their corresponding definitions following these guidelines:

• Include the heading “LIST OF ABBREVIATIONS” in all capital letters, and center it 1″ below the top of the page.
• Arrange your abbreviations alphabetically.
• Abbreviations must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• If an entry takes up more than one line, single-space between the two lines.
• The List of Abbreviations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use symbols in your thesis or dissertation, you may combine them with your abbreviations, titling the section “LIST OF ABBREVIATIONS AND SYMBOLS”, or you may set up a separate list of symbols and their definitions by following the formatting instructions above for abbreviations. The heading you choose must be in all capital letters and centered 1″ below the top of the page.

Previous: Introduction

Next: Format

• Structuring your thesis
• Information and services
• Higher Degree by Research
• HDR candidature support
• How to write a thesis

The best structure for your HDR thesis will depend on your discipline and the research you aim to communicate.

Before you begin writing your thesis, make sure you've read our advice on thesis preparation for information on the requirements you'll need to meet.

Once you've done this, you can begin to think about how to structure your thesis. To help you get started, we've outlined a basic structure below, but the requirements for your discipline may be different .

If you need help determining a suitable structure:

• read other theses in your discipline – you can search for UQ theses on the Library website. For prime examples, search for theses that received commendations from their examiners
• check with your advisor.

A basic thesis structure includes the following sections:

Introduction and literature review

Results or findings.

An abstract is a summary of your entire thesis and should provide a complete overview of the thesis, including your key results and findings.

An abstract is different to your introduction, and shouldn't be used to advertise your thesis — it should provide enough information to allow readers to understand what they'll learn by reading the thesis.

Your abstract should answer the following questions:

• What did you do?
• How did you do it?
• Why was it worth doing?
• What were the key results?
• What are the implications or significance of the results?

As your abstract will have a word limit, you may be unable to answer every question in detail. If you find yourself running out of words, make sure you include your key findings before other information.

All theses require introductions and literature reviews, but the structure and location of these can vary.

In some cases, your literature review will be incorporated into the introduction. You may also review literature in other parts of your thesis, such as in the methods section.

Other options for structuring an introduction and literature review include:

• a brief introductory chapter with a longer, separate literature review chapter
• a long introductory chapter with a brief introductory section followed by literature review sections
• a brief introductory chapter with detailed literature reviews relevant to the topic of each chapter provided separately in each chapter — this is common in a thesis comprised of publications.

If you have a separate introduction and literature review, they should complement, not repeat, each other.

The introduction should outline the background and significance of the broad area of study, as well as your:

• general aims – what you intend to contribute to the understanding of a topic
• specific objectives – which particular aspects of that topic you'll be investigating
• the rationale for proceeding in the way that you did
• your motivation or the justification for your research – the level of detail can vary depending on how much detail you will be including in a literature review.

The literature review should provide a more detailed analysis of research in the field, and present more specific aims or hypotheses for your research. What's expected for a literature review varies depending on your:

• program – a PhD thesis requires a more extensive literature review than an MPhil thesis
• discipline – analyse well-written examples from your discipline to learn the conventions for content and structure.

To get some ideas about how to structure and integrate your literature review, look at how to write a literature review and an example analysis of a literature review , or talk to your advisor.

A possible structure for your methods section is to include an introduction that provides a justification and explanation of the methodological approach you chose, followed by relevant sub-sections. Some standard sub-sections of a methods chapter include:

• Participants
• Procedures.

How the methods section is structured can depend on your discipline, so review other theses from your discipline for ideas for structure.

Regardless of structure, the methods section should explain:

• how you collected and analysed your data – you only need to include enough detail that another expert in the field could repeat what you've done (you don't have to detail field standard techniques or tests)
• why you chose to collect specific data
• how this data will help you to answer your research questions
• why you chose the approach you went with.

You may want to present your results separately to your discussion. If so, use the results section to:

• specify the data you collected and how it was were prepared for analysis
• describe the data analysis (e.g. define the type of statistical test that was applied to the data)
• describe the outcome of the analysis
• present a summary and descriptive statistics in a table or graph.

Use tables and figures effectively

Reports usually include tables, graphs and other graphics to present data and supplement the text. To learn how to design and use these elements effectively, see our guides to:

• incorporating tables, figures, statistics and equations (PDF, 1.2MB)
• graphic presentation (PDF, 2.9MB) .

Use the discussion section to:

• comment on your results and explain what they mean
• compare, contrast and relate your results back to theory or the findings of other studies
• identify and explain any unexpected results
• identify any limitations to your research and any questions that your research was unable to answer
• discuss the significance or implications of your results.

If you find that your research ends up in a different direction to what you intended, it can help to explicitly acknowledge this and explain why in this section.

Use the conclusion section to:

• emphasise that you've met your research aims
• summarise the main findings of your research
• restate the limitations of your research and make suggestions for further research.

In some cases, the discussion and conclusion sections can be combined. Check with your advisor if you want to combine these sections.

• Thesis writing tips

Learning Advisers

Our advisers can help undergraduate and postgraduate students in all programs clarify ideas from workshops, help you develop skills and give feedback on assignments.

How a Learning Adviser can help

Further support

Writing a clear and engaging research paper Thesis and dissertation writing: an examination of published advice and actual practice Scientific writing

Sample Dissertation Abstracts

Amy K. Anderson , 2014

“Image/Text and Text/Image: Reimagining Multimodal Relationships through Dissociation”

“W.J.T. Mitchell has famously noted that we are in the midst of a “pictorial turn,” and images are playing an increasingly important role in digital and multimodal communication. My dissertation addresses the question of how meaning is made when texts and images are united in multimodal arguments. Visual rhetoricians have often attempted to understand text-image arguments by privileging one medium over the other, either using text-based rhetorical principles or developing new image-based theories. I argue that the relationship between the two media is more dynamic, and can be better understood by applying The New Rhetoric ’s concept of dissociation, which Chaim Perelman and Lucie Olbrechts-Tyteca developed to demonstrate how the interaction of differently valued concepts can construct new meaning. My dissertation expands the range of dissociation by applying it specifically to visual contexts and using it to critique visual arguments in a series of historical moments when political, religious, and economic factors cause one form of media to be valued over the other: Byzantine Iconoclasm, the late medieval period, the 1950’s advertising boom, and the modern digital age. In each of these periods, I argue that dissociation reveals how the privileged medium can shape an entire multimodal argument. I conclude with a discussion of dissociative multimodal pedagogy, applying dissociation to the multimodal composition classroom.”

Holly F. Osborn , 2014

“Apparitional Economies: Spectral Imagery in the Antebellum Imagination”

“ Apparitional Economies is invested in both a historical consideration of economic conditions through the antebellum era and an examination of how spectral representations depict the effects of such conditions on local publics and individual persons. From this perspective, the project demonstrates how extensively the period’s literature is entangled in the economic: in financial devastation, in the boundaries of seemingly limitless progress, and in the standards of value that order the worth of commodities and the persons who can trade for them.  I argue that the space of the specter is a force of representation, an invisible site in which the uncertainties of antebellum economic and social change become visible. I read this spectral space in canonical works by Nathaniel Hawthorne, Edgar Allan Poe, Herman Melville, and Walt Whitman and in emerging texts by Robert Montgomery Bird, Theophilus Fisk, Fitz James O’Brien, and Edward Williams Clay.  Methodologically, Apparitional Economies moves through historical events and textual representation in two ways: chronologically with an attention to archival materials through the antebellum era (beginning with the specters that emerge with the Panic of 1837) and interpretively across the readings of a literary specter (as a space of lack and potential, as exchange, as transformation, and as the presence of absence). As a failed body and, therefore, a flawed embodiment of economic existence, the literary specter proves a powerful representation of antebellum social and financial uncertainties.”

Michael Todd Hendricks , 2014

“Knowing and Being Known: Sexual Delinquency, Stardom, and Adolescent Girlhood in Midcentury American Film”

“Sexual delinquency marked midcentury cinematic representations of adolescent girls in 1940s, 50, and early 60s. Drawing from the history of adolescence and the context of midcentury female juvenile delinquency, I argue that studios and teen girl stars struggled for decades with publicity, censorship, and social expectations regarding the sexual license of teenage girls. Until the late 1950s, exploitation films and B movies exploited teen sex and pregnancy while mainstream Hollywood ignored those issues, struggling to promote teen girl stars by tightly controlling their private lives but depriving fan magazines of the gossip and scandals that normally fueled the machinery of stardom. The emergence and image of the postwar, sexually autonomous teen girl finally began to see expression in mainstream melodramas of the late 50s, and teen girl stars such as Sandra Dee and Natalie Wood created new, “post-delinquent” star images wherein “good girls” could still be sexually experienced. This new image was a significant departure from the widespread belief that the sexually active teen girl was a fundamentally delinquent threat to the nuclear family, and offered a liberal counterpoint to more conservative teen girl prototypes like Hayley Mills, which continued to have cultural currency.”

Emily A. Dotson , 2014

“Strong Angels of Comfort: Middle Class Managing Daughters in Victorian Literature”

“This dissertation joins a vibrant conversation in the social sciences about the challenging nature of care labor as well as feminist discussions about the role of the daughter in Victorian culture.  It explores the literary presence of the middle class managing daughter in the Victorian home.  Collectively, the novels in this study articulate social anxieties about the unclear and unstable role of daughters in the family, the physically and emotionally challenging work they, and all women, do, and the struggle for daughters to find a place in a family hierarchy, which is often structured not by effort or affection, but by proscribed traditional roles, which do not easily adapt to managing daughters, even if they are the ones holding the family together.  The managing daughter is a problem not accounted for in any conventional domestic structure or ideology so there is no role, no clear set of responsibilities and no boundaries that could, and arguably should, define her obligations, offer her opportunities for empowerment, or set necessary limits on the broad cultural mandate she has to comfort and care others.  The extremes she is often pushed to reveals the stresses and hidden conflicts for authority and autonomy inherent in domestic labor without the iconic angel in the house rhetoric that so often masks the difficulties of domestic life for women. She gains no authority or stability no matter how loving or even how necessary she is to a family because there simply is no position in the parental family structure for her.  The managing daughter thus reveals a deep crack in the structure of the traditional Victorian family by showing that it often cannot accommodate, protect, or validate a loving non-traditional family member because it values traditional hierarchies over emotion or effort.  Yet, in doing so, it also suggests that if it is position not passion that matters, then as long as a woman assumes the right position in the family then deep emotional connections to others are not necessary for her to care competently for others.”

Virginia B. Engholm , 2014

“The Power of Multiplying: Reproductive Control in American Culture, 1850-1930”

“Prior to the advent of modern birth control beginning in the nineteenth century, the biological reproductive cycle of pregnancy, post-partum recovery, and nursing dominated women’s adult years. The average birth rate per woman in 1800 was just over seven, but by 1900, that rate had fallen to just under than three and a half. The question that this dissertation explores is what cultural narratives about reproduction and reproductive control emerge in the wake of this demographic shift. What’s at stake in a woman’s decision to reproduce, for herself, her family, her nation? How do women, and society, control birth?  In order to explore these questions, this dissertation broadens the very term “birth control” from the technological and medical mechanisms by which women limit or prevent conception and birth to a conception of “controlling birth,” the societal and cultural processes that affect reproductive practices. This dissertation, then, constructs a cultural narrative of the process of controlling birth. Moving away from a focus on “negative birth control”—contraception, abortion, sterilization—the term “controlling birth” also applies to engineering or encouraging wanted or desired reproduction. While the chapters of this work often focus on traditional sites of birth control—contraceptives, abortion, and eugenics—they are not limited to those forms, uncovering previously hidden narratives of reproduction control. This new lens also reveals men’s investment in these reproductive practices.  By focusing on a variety of cultural texts—advertisements, fictional novels, historical writings, medical texts, popular print, and film—this project aims to create a sense of how these cultural productions work together to construct narratives about sexuality, reproduction, and reproductive control. Relying heavily on a historicizing of these issues, my project shows how these texts—both fictional and nonfictional—create a rich and valid site from which to explore the development of narratives of sexuality and reproductive practices, as well as how these narratives connect to larger cultural narratives of race, class, and nation. The interdisciplinary nature of this inquiry highlights the interrelationship between the literary productions of the nineteenth and twentieth century and American cultural history.

Amber M. Stamper , 2013

“Witnessing the Web: The Rhetoric of American E-Vangelism and Persuasion Online”

“From the distribution of religious tracts at Ellis Island and Billy Sunday’s radio messages to televised recordings of the Billy Graham Crusade and Pat Robertson’s 700 Club, American evangelicals have long made a practice of utilizing mass media to spread the Gospel. Most recently, these Christian evangelists have gone online. As a contribution to scholarship in religious rhetoric and media studies, this dissertation offers evangelistic websites as a case study into the ways persuasion is carried out on the Internet. Through an analysis of digital texts—including several evangelical home pages, a chat room, discussion forums, and a virtual church—I investigate how conversion is encouraged via web design and virtual community as well as how the Internet medium impacts the theology and rhetorical strategies of web evangelists. I argue for “persuasive architecture” and “persuasive communities”—web design on the fundamental level of interface layout and tightly-controlled restrictions on discourse and community membership—as key components of this strategy. In addition, I argue that evangelical ideology has been influenced by the web medium and that a “digital reformation” is taking place in the church, one centered on a move away from the Prosperity Gospel of televangelism to a Gospel focused on God as divine problem-solver and salvation as an uncomplicated, individualized, and instantaneously-rewarding experience, mimicking Web 2.0 users’ desire for quick, timely, and effective answers to all queries. This study simultaneously illuminates the structural and fundamental levels of design through which the web persuades as well as how—as rhetoricians from Plato’s King Thamus to Marshall McLuhan have recognized—media inevitably shapes the message and culture of its users.”

Devjani Roy , 2013

“Randomness, Uncertainty, and Economic Behavior: The Life of Money in Eighteenth-Century Fiction”

“My dissertation argues that fiction produced in England during the frequent financial crises and political volatility experienced between 1770 and 1820 both reflected and shaped the cultural anxiety occasioned by a seemingly random and increasingly uncertain world. The project begins within the historical framework of the multiple financial crises that occurred in the late eighteenth century: seven crises took place between 1760 and 1797 alone, appearing seemingly out of nowhere and creating a climate of financial meltdown. But how did the awareness of economic turbulence filter into the creative consciousness? Through an interdisciplinary focus on cultural studies and behavioral economics, the dissertation posits that in spite of their conventional, status quo affirming endings (opportunists are punished, lovers are married), novels and plays written between 1770 and 1820 contemplated models of behavior that were newly opportunistic, echoing the reluctant realization that irrationality had become the norm rather than a rare aberration. By analyzing concrete narrative strategies used by writers such as Frances Burney, Georgiana Cavendish, Hannah Cowley, and Thomas Holcroft, I demonstrate that late eighteenth-century fiction both articulates and elides the awareness of randomness and uncertainty in its depiction of plot, character, and narrative.”

George Micajah Phillips , 2011

“Seeing Subjects: Recognition, Identity, and Visual Cultures in Literary Modernism”

“ Seeing Subjects plots a literary history of modern Britain that begins with Dorian Gray obsessively inspecting his portrait’s changes and ends in Virginia Woolf’s visit to the cinema where she found audiences to be “savages watching the pictures.” Focusing on how literature in the late-19 th and 20 th centuries regarded images as possessing a shaping force over how identities are understood and performed, I argue that modernists in Britain felt mediated images were altering, rather than merely representing, British identity. As Britain’s economy expanded to unprecedented imperial reach and global influence, new visual technologies also made it possible to render images culled from across the British world—from its furthest colonies to darkest London—to the small island nation, deeply and irrevocably complicating British identity. In response, Oscar Wilde, Joseph Conrad, T. S. Eliot, and others sought to better understand how identity was recognized, particularly visually. By exploring how painting, photography, colonial exhibitions, and cinema sought to manage visual representations of identity, these modernists found that recognition began by acknowledging the familiar but also went further to acknowledge what was strange and new as well. Reading recognition and misrecognition as crucial features of modernist texts, Seeing Subjects argues for a new understanding of how modernism’s formal experimentation came to be and for how it calls for responses from readers today.”

Aparajita Sengupta , 2011

“Nation, Fantasy, and Mimicry: Elements of Political Resistance in Postcolonial Indian Cinema”

“In spite of the substantial amount of critical work that has been produced on Indian cinema in the last decade, misconceptions about Indian cinema still abound. Indian cinema is a subject about which conceptions are still muddy, even within prominent academic circles. The majority of the recent critical work on the subject endeavors to correct misconceptions, analyze cinematic norms and lay down the theoretical foundations for Indian cinema. This dissertation conducts a study of the cinema from India with a view to examine the extent to which such cinema represents an anti-colonial vision. The political resistance of Indian films to colonial and neo-colonial norms, and their capacity to formulate a national identity is the primary focus of the current study.”

Kenneth Carr Hawley , 2007

“The Boethian Vision of Eternity in Old, Middle, and Early Modern English Translations of De Consolatione Philosophi”

“While this analysis of the Old, Middle, and Early Modern English translations of De Consolatione Philosophiandamp;aelig; provides a brief reception history and an overview of the critical tradition surrounding each version, its focus is upon how these renderings present particular moments that offer the consolation of eternity, especially since such passages typify the work as a whole. For Boethius, confused and conflicting views on fame, fortune, happiness, good and evil, fate, free will, necessity, foreknowledge, and providence are only capable of clarity and resolution to the degree that one attains to knowledge of the divine mind and especially to knowledge like that of the divine mind, which alone possesses a perfectly eternal perspective. Thus, as it draws upon such fundamentally Boethian passages on the eternal Prime Mover, this study demonstrates how the translators have negotiated linguistic, literary, cultural, religious, and political expectations and forces as they have presented their own particular versions of the Boethian vision of eternity. Even though the text has been understood, accepted, and appropriated in such divergent ways over the centuries, the Boethian vision of eternity has held his Consolations arguments together and undergirded all of its most pivotal positions, without disturbing or compromising the philosophical, secular, academic, or religious approaches to the work, as readers from across the ideological, theological, doctrinal, and political spectra have appreciated and endorsed the nature and the implications of divine eternity. It is the consolation of eternity that has been cast so consistently and so faithfully into Old, Middle, and Early Modern English, regardless of form and irrespective of situation or background. For whether in prose and verse, all-prose, or all-verse, and whether by a Catholic, a Protestant, a king, a queen, an author, or a scholar, each translation has presented the texts central narrative: as Boethius the character is educated by the figure of Lady Philosophy, his eyes are turned away from the earth and into the heavens, moving him and his mind from confusion to clarity, from forgetfulness to remembrance, from reason to intelligence, and thus from time to eternity.”

Douglas Larue Reside , 2006

“The Electronic Edition and Textual Criticism of American Musical Theatre”

“For many, contemporary theatre is represented by the musical. The form remains, however, virtually unstudied by literary scholars. In part, this may be a result of the difficulty of accessing the texts. Reading a musical from a traditional codex is no easy matter. The integration of text and music in a musical make it inappropriate to separate the two. One can try to follow along with a cast recording. In most cases, though, this is awkward. Many cast albums record a significantly modified version of the score and lyrics and few include the entire work. Further, musical theatre texts often exist in many different versions. This work begins with a summary of the problems one encounters when editing a multi-authored text (musicals often have a lyricist, librettist, and composer) which may be revised for practical (rather than aesthetic) reasons. The merits of restoring the material changed during the production process are debated. In this discussion some attempt is made to identify who should be considered the dominating collaborator (or auteur) of a musical. Ultimately, this dissertation argues that the notion of trying to restore an "authorial Ur-Text" makes little sense given the multitude of collaborators involved in the process of making musicals. Instead, an electronic variorum edition is presented as an alternative means of studying and teaching musical theatre texts. The study concludes with a narrative of the authors own work on an electronic edition of the 1998 Broadway musical Parade and ends with a critical introduction to this text.”