m.tech thesis pdf

MTech Theses

• Electronics and Communication Engineering
• By Issue Date

Search within this community and its collections:

Collections in this community

• Year-2014 [14]
• Year-2015 [23]
• Year-2016 [29]
• Year-2017 [18]
• Year-2018 [8]
• Year-2019 [7]
• Year-2020 [12]
• Year-2021 [3] Year-2021
• Year-2022 [12]
• Year-2023 [6] Year-2023

Recent Submissions

• A computational approach to assist healthcare professionals in selecting antibacterial drugs to treat bacterial infections  Chatterjee, Sayantika ; Majumdar, Angshul (Advisor) ( IIIT-Delhi , 2023-05 ) The reproducibility of experiments has been a long-standing obstruction for farther scientific evolution. Computational methods are being involved to accelerate and to economize drug discovery and the development process. ...
• Visual monitoring for wildlife : detection and re-identification  Ananya ; Anand, Saket (Advisor) ( IIIT-Delhi , 2023-05 ) Visual wildlife monitoring of animals requires detection for species-level categorization and re-identification (Re-ID) for population estimation of an individual species. Traditionally, the monitoring is done via GPS ...
• Counterfactual inference framework for joint estimation of medical costs, treatment effect and time-to-event  Khan, Zuber ; Prasad, Ranjitha (Advisor) ( IIIT-Delhi , 2022-12 ) Optimal treatment selection is extremely crucial in emergency situations such as for a patient admitted in ICU. However, the chosen medical treatment may not necessarily be a financially favorable choice. In some of the ...
• Software prototype of IEEE 802.11ad based joint radar communication receiver  Sindhu, V Sri ; Ram, Shobha Sundar (Advisor) ; Darak, Sumit Jagdish (Advisor) ( IIIT-Delhi , 2022-09 ) Rapid beam alignment is required to support high gain millimeter wave (mmW) communication links between a base station (BS) and mobile users (MU). The standard IEEE 802.11ad protocol enables beam alignment at the BS ...
• Optimizing medical costs and resource utilization using causal inference and explaining the model’s predictions  Jain, Tanisha ; Prasad, Ranjitha (Advisor) ( IIIT-Delhi , 2023-07 ) Machine learning (ML) models that accurately predict treatment effects and related healthcare costs can bring significant efficiencies in the healthcare industry. These models could help reduce fatalities resulting from ...
• Software and hardware prototype of ieee 802.11ad based joint radar communication transmitter  Jain, Soumya ; Ram, Shobha Sundar (Advisor) ; Darak, Sumit Jagdish (Advisor) ( IIIT-Delhi , 2022-07 ) Next-generation wireless communication systems are expected to support high-mobility and high-bandwidth vehicle-to-everything (V2X) communications in sub-6 GHz and millimeter wave (mmWave) spectrum. The deployment in mmWave ...
• A practical methodology to waive marginal timing violations using machine learning  Kumar, Rajat ; Saurabh, Sneh (Advisor) ( IIIT-Delhi , 2022-07 ) Achieving timing closure is a challenging task, and it becomes more complicated due to the artificial pessimism in the traditional timing models of the flip-flops. During the signoff stages, we can alleviate this problem ...
• Personalized unsupervised federated autoencoders  Arora, Kanika ; Prasad, Ranjitha (Advisor) ( IIIT-Delhi , 2023-07 ) An immense amount of data is generated daily usingmodern technologies in autonomous vehicles, IoT, smart grids, etc. But unfortunately, this data generated at the edge cannot be used for any machine learning model training ...
• Explorized filter-based on-policy adaptive optimal lqr with unknown dynamics  Chhillar, Jayant ; Roy, Sayan Basu (Advisor) ( IIIT-Delhi , 2023-08 ) Conventionally, optimal control solutions demand offline a priori knowledge of the system dynamics. Adaptive optimal control methods have been advantageous in allowing for dynamic controllers to approximate optimal control ...
• An artificial neural network based incremental placer for wire length reduction  Gagandeep ; Saurabh, Sneh (Advisor) ( IIIT-Delhi , 2022-08 ) The total wire length of a design affects various QoR measures such as timing, power, and routability. Hence, it is a critical parameter to optimize in physical design. Post global routing, the total wire length can be ...
• A sense amplifier based bulk built-in current sensor for detecting laser-induced currents  Batabyal, Debjit ; Grover, Anuj (Advisor) ; Kumar, Ashish (Advisor) ( IIIT-Delhi , 2022-07 ) Soft errors can occur when integrated circuits (ICs) are subjected to hostile conditions in space, the upper atmosphere, or even on Earth. For more than four decades, researchers have been studying similar phenomena. Among ...
• To study the impact of process variations on NoC performance: a circuit-centric approach  Anushka ; Deb, Sujay (Advisor) ( IIIT-Delhi , 2023-12 ) Due to technology scaling, achieving increasing bandwidth demands has become challenging and has led to the preference of Network-On-Chips (NoCs) over bus architecture as the communication infrastructure in multi-core ...
• Hardware software co-design of deep learning augmented wireless channel estimation  Sharma, Animesh ; Darak, Sumit Jagdish (Advisor) ( IIIT-Delhi , 2022-12 ) The feasibility study of deep learning (DL) approaches for reliable, flexible, and high throughput wireless physical layer (PHY) has received significant interest from academia and industry. In this direction, 3GPP has set ...
• Power estimation of in-memory compute based memory arrays using simulink blocks  Mohd, Aamir ; Grover, Anuj (Advisor) ( IIIT-Delhi , 2022-10 ) System-on-Chip (SoC) incorporates all the components of any system onto a single integrated circuit. Their compact, power-efficient architecture allows them to be used in various applications like automotive, consumer ...
• Design & performance analysis of wireless radar receiver for joint radar communication systems on RFSoC  Jha, Shragvi Sidharth ; Darak, Sumit Jagdish (Advisor) ( IIIT-Delhi , 2022-05 ) Autonomous vehicles are becoming prevalent day-by-day, and with the advent of such technology comes its various safety risks and challenges. The primary objective is to improve road safety and mobility for all users. The ...
• LDO with low quiescent current OTA and capacitance scaling circuit  Bhardwaj, Aman ; Hashmi, Mohammad S. (Advisor) ( IIIT-Delhi , 2021-12 ) The efficiency, dependability, and lifespan of any electronic system, particularly battery-powered and portable gadgets, are dependent on a specialized power management unit that offers a clean and controlled power supply. ...
• Relative position covariance estimation of resident space objects using extrapolated single propagation technique  Suresh, Ardra ; Biswas, Sanat (Advisor) ( IIIT-Delhi , 2022-07 ) Due to the ever-increasing space activities, there has been a stark increase in the number of space objects and debris, which include defunct satellites, pieces of space hardware, and launch vehicle remains. This poses a ...
• Exploring RF data converters on RFSoC platform  Sharma, Somya ; Darak, Sumit Jagdish (Advisor) ( IIIT-Delhi , 2022-07-04 ) The evolution of conventional field-programmable gate array (FPGA) platforms to all programmable multi-processor system-on-chip (MPSoC) platforms in the last decade has comprehensively addressed the scalability and flexibility ...
• On the statistical characterization of the binomial line processes  Sanyal, Souradip ; Ghatak, Gourab (Advisor) ( IIIT-Delhi , 2021-12 ) This thesis introduces the Binomial Line Process (BLP) and then Binomial Line Cox Process (BLCP) based on BLP, a novel spatial stochastic model for the charac- terization of streets in the statistical evaluation of wireless ...
• Hardware software co-design of 5G NR polar encoder and decoder on system-on-Chip  Mansi ; Darak, Sumit Jagdish (Advisor) ( IIITD , 2022-06-30 ) Channel encoder and decoder are critical components of the wireless physical layer (PHY), enabling the transceiver to overcome transmission errors due to wireless channel fading and interference. In 5G, polar encoder and ...

Search Repository

All of repository.

• Communities & Collections

This Community

• Hashmi, Mohammad S. (Advisor) (31)
• Deb, Sujay (Advisor) (13)
• Darak, Sumit Jagdish (Advisor) (12)
• Ram, Shobha Sundar (Advisor) (11)
• Bohara, Vivek Ashok (Advisor) (8)
• Fell, Alexander (Advisor) (8)
• Grover, Anuj (Advisor) (7)
• Majumdar, Angshul (Advisor) (6)
• Saurabh, Sneh (Advisor) (5)
• Bahubalindruni, Pydi Ganga Mamba (Advisor) (4)
• ... View More
• Cooperative spectrum sharing (3)
• Dictionary learning (3)
• Autoencoders (2)
• Cognitive radio (2)
• Compressed Sensing (2)
• Counterfactual inference (2)
• Deep neural network (2)

Date Issued

Home > College of Engineering > Dept. of Materials Science and Engineering > Dissertations and Master's Theses

Dept. of Materials Science and Engineering Dissertations and Master's Theses

Explore our collection of dissertations and master's theses from the Department of Materials Science and Engineering below.

Theses/Dissertations/Reports from 2024 2024

COMPUTATIONAL EVALUATION OF SOME BASIC MATERIAL PARAMETERS IN COBALT-ALUMINUM ALLOYS , Hemanth Kumar Reddy Basireddy

High Temperature Strength Reduces Soldering In Aluminum High Pressure Die Casting , Jacob A. Belke

IMPROVING CAST STEEL RAIL COUPLER FATIGUE RESISTANCE THROUGH LOCAL WIRE-ARC ADDITIVE MANUFACTURING , Andrew M. Bunge

MECHANICAL PROPERTIES AND CYCLING FATIGUE OF ZN-BASED ALLOYS: EFFECTS OF THERMAL TREATMENT , Henry D. Summers

NICKEL SUPERALLOY COMPOSITION AND PROCESS OPTIMIZATION FOR WELDABILITY, COST, AND STRENGTH , Sophie A. Mehl

Theses/Dissertations/Reports from 2023 2023

CARBONATE-SUPERSTRUCTURED SOLID FUEL CELLS WITH HYDROCARBON FUELS , Hanrui Su

EFFECT OF SC ON RECRYSTALLIZATION RESISTANCE OF AA7050 , Keaton Schmidt

IMPROVED DUCTILITY IN AN ARTIFICIALLY AGED AL-ZN-MG ALLOY WITH MN ADDITIONS , Daniel S. Freiberg

IMPROVED ROLLING CONTACT FATIGUE OF DUCTILE IRON UTILIZING CHILLS AND CHROMIUM ADDITIONS , Ben L. Wang

OPTIMIZING THE EXTRUDABILITY OF 6082 ALUMINUM BY VARYING THE MAGNESIUM AND SILICON CONCENTRATION , Eli A. Harma

QUANTIFYING THE EVOLUTION OF STRENGTHENING MECHANISMS FOR COMMERCIALLY PRODUCED NIOBIUM AND TITANIUM HSLA STEEL SHEET , Isabella M.W. Jaszczak

STABILITY OF LiNiCoAl-OXIDE ELECTRODE MATERIAL UNDER HIGH-TEMPERATURE CERAMIC FUEL CELL CONDITIONS , Wei Zhang

SYNTHESIS AND CHARACTERIZATION OF THREE-DIMENSIONAL HYDROGENATED GRAPHENE , Yuhuan Fei

Theses/Dissertations/Reports from 2022 2022

ADDITIVE MANUFACTURING OF FUNCTIONAL POLYMER COMPOSITES , Masoud Kasraie

Engineering Mechanically-Stable Zinc-Based Alloys for Medical Implants , Morteza Shaker Ardakani

LENGTH-SCALE-DEPENDENT STRESS RELIEF MECHANISMS IN HIGH PURITY INDIUM , Fereshteh Mallakpour

Theses/Dissertations/Reports from 2021 2021

ANALYZING VARIATION IN DISPERSOID FORMATION IN ALUMINUM ALLOYS BY MINOR CHANGES IN HOMOGENIZATION TEMPERATURE , Brendan Treanore

A Resolution of Grain Boundary Strengthening Mechanisms by Nanoindentation Induced Local Mechanical Response , Prasad Pramod Soman

ATOMISTIC MONTE CARLO SIMULATION STUDY OF PHASE TRANSITIONS IN METAL ALLOYS , Xiaoxu Guo

Exploring Rapid Solidification and Equal Channel Angular Pressing in the Fabrication of Mg-Based Alloys for Medical Applications , Emily Tom

HIGHLY EFFICIENT AND STABLE NI-BASED CATALYSTS FOR DRY REFORMING OF METHANE , Meijia Li

Multi-level analysis of atomic layer deposition barrier coatings on additively manufactured plastics for high vacuum applications , Nupur Bihari

ROLE OF ETA PHASE EVOLUTION ON CREEP PROPERTIES OF NICKEL BASE SUPERALLOYS USED IN ADVANCED ELECTRIC POWER GENERATION PLANTS , Ninad Mohale

THE EFFECTS OF MOLYBDENUM, CHROMIUM, AND NIOBIUM ON GRAY IRON FOR BRAKE ROTOR APPLICATIONS , Matthew Hasbrouck

THERMOMECHANICAL MECHANISMS THAT CAUSE ADHESION OF ALUMINUM HIGH PRESSURE DIE CASTINGS TO THE DIE , Alex Monroe

Theses/Dissertations/Reports from 2020 2020

EFFECT OF CERIUM AND MAGNESIUM ADDITIONS ON THE STRENGTH AND MORPHOLOGY OF THE INTERMETALLIC COMPOUND LAYERS IN ALUMINUM-STEEL DISSIMILAR CASTINGS , Matt Thomas

EFFECT OF COBALT IN THIN WALL DUCTILE IRON AND SOLID SOLUTION STRENGTHENED FERRITIC DUCTILE IRON , Alejandra I. Almanza

INFLUENCE OF RAPID SOLIDIFICATION AND WROUGHT PROCESSING ON PRECIPITATION STRENGTHENING AND DEFORMATION MECHANISMS IN AL-SC-ZR ALLOYS , Yang Yang

MAGNETISM IN γ-FeSi2 NANOSTRUCTURES: A FIRST PRINCIPLES STUDY , Sahil Dhoka

MO6S8-BASED SINGLE-METAL-ATOM CATALYSTS FOR METHANOL SYNTHESIS FROM STEAM REFORMING OF METHANE , H. T. Zhang Zhang

Multiphysics phase field modeling of electromigration , Zachary Morgan

SURFACE MODIFICATION OF ZnO BASED DYE-SENSITIZED SOLAR CELLS , Shu Zhao

SYNTHESIS AND APPLICATIONS OF METAL/SEPIOLITE AND METAL OXIDE/SEPIOLITE NANOCOMPOSITES , Huaguang Wang

The Effects of Carbon Equivalent, Return Ratios, Mold Preparation, Riser Feed and Casting Temperature on the Microstructural and Mechanical Properties of 100-70-03 Pearlitic Ductile Iron , Erin VanDusen

THE STUDY OF CHEMICAL INDUCED POLYOLEFIN-BASED ION EXCHANGE MEMBRANE FOR ELECTRODIALYSIS APPLICATION , Di Huang

Theses/Dissertations/Reports from 2019 2019

EFFECT OF DEVELOPMENT OF SCANDIUM TRIALUMINIDE PRECIPITATES ON CORROSION AND MECHANICAL BEHAVIOR IN ALUMINUM-MAGNESIUM ALLOYS , Carson Williams

INTEGRATED COMPUTATIONAL MATERIALS ENGINEERING (ICME) INVESTIGATION OF ELECTRICAL CONDUCTIVITY AND THERMODYNAMIC STABILITY FOR PRECIPITATION STRENGTHENED Al-Zn-Zr AND Al-Zn-Ni TERNARY ALLOYS , Oladeji Fadayomi

Investigating Microalloying Elements to Accelerate Zirconium Trialuminide Precipitation in Aluminum Alloys , Philip D. Staublin

Magnetic Domain Structures in Fe-Ga Alloys , Matthew N. Tianen

Theses/Dissertations/Reports from 2018 2018

Development and Characterization of Biodegradable Zinc Vascular Ligation Clips , Jeffrey Michael Brookins

Effect of Hierarchical Structure and Orientation on Water-Repellent Legs of Water-Walking Insects , Georgia Hurchalla

EFFECTS AND LIMITATIONS OF RESIDUAL ALLOYING ELEMENTS IN SILICON SOLID SOLUTION STRENGTHENED FERRITIC DUCTILE IRON , Julia Scruton

EFFECTS OF HEAT TREATMENT CONDITIONS ON MORPHOLOGY, OPTICAL PROPERTIES, AND PERFORMANCE OF TiO2 IN DYE SENSITIZED SOLAR CELLS , Peter Hokemeir-Seim

GRAPHENE ELECTRODES FOR SUPERCAPACITORS AND CAPACITIVE DEIONIZATION , Liang Chang

MEASUREMENT OF PLANAR FAULT PROBABILITIES IN AUSTEMPERED DUCTILE IRON AND 304L STAINLESS STEEL , Nathan Peterson

Theses/Dissertations/Reports from 2017 2017

BALL-MILLING TUNED BAND STRUCTURES OF ZnO NANOPARTICLES , Qianli Ma

EVALUATION OF THERMAL STABILITY OF AUSFERRITE IN AUSTEMPERED DUCTILE IRON USING DIFFERENTIAL SCANNING CALORIMETRY , Karl Warsinski

FLOWER-LIKE ΒETA-COBALT SULFIDE MICROSPHERE AND ACTIVATED CARBON/COBALT SULFIDE COMPOSITES FOR CAPACITIVE DEIONIZATION , Xuechen Wu

FOOD DYES BASED DYE-SENSITIZED SOLAR CELLS , Dafu Wang

Formulation and testing of biodegradable polymeric coating on zinc wires in cardiovascular stent application , Avishan Arab Shomali

HIGHLY EFFICIENT ELECTRODE MATERIALS AND THEIR APPLICATIONS IN SOLAR CELLS , Wei Wei

In-situ synthesis of NiMoO4 on Ni foam as a binder-free electrode for supercapacitor , Tawei Chiu

MICROSTRUCTURAL EVOLUTION AND MECHANICAL PROPERTIES OF Zn-Ti ALLOYS FOR BIODEGRADABLE STENT APPLICATIONS , Zhiyong Yin

NONLINEAR DIELECTRIC BEHAVIOR OF FIELD-INDUCED ANTIFERROELECTRIC/PARAELECTRIC-TO-FERROELECTRIC PHASE TRANSITION FOR HIGH ENERGY DENSITY CAPACITOR APPLICATION , Mingyang Li

Plating Wastewater Treatment , Yuzhe Zhang

STRUCTURAL CHARACTERISTICS AND CORROSION BEHAVIOR OF BIO-DEGRADABLE ZN-LI ALLOYS IN STENT APPLICATION , Shan Zhao

THE INFLUENCE OF PRIOR NATURAL AGING ON ARTIFICIAL AGE HARDENING IN AL-MG-SI ALLOYS , Alex Poznak

TIGHTENING THE LOOP ON THE CIRCULAR ECONOMY: DISTRIBUTED PLASTIC RECYCLING WITH AN OPEN SOURCE RECYCLEBOT , Shan Zhong

Utilizing RepRap Style 3D Printers for the Manufacturing of Composite Heat Exchangers , John Laureto

Theses/Dissertations/Reports from 2016 2016

Design for Low-Cost Gas Metal Arc Weld-Based Aluminum 3-D Printing , Amberlee S. Haselhuhn

DYNAMIC ATOMISTIC STUDY OF TUNNEL FUNCTIONS IN NANOSTRUCTURED TRANSITIONAL METAL OXIDES , Yifei Yuan

Experimental Investigations of Fused Filament Fabrication for Applications to Affordable Scientific Hardware , Bas Wijnen

Formation of Copper Gasars at Subatmospheric Pressures , Helen J. Rau

HIGHLY EFFICIENT TEMPERATURE-INDUCED VISIBLE LIGHT PHOTOCATALYTIC HYDROGEN PRODUCTION , Bing Han

INCREASING SOLAR ENERGY CONVERSION EFFICIENCY IN HYDROGENATED AMORPHOUS SILICON PHOTOVOLTAIC DEVICES WITH PLASMONIC PERFECT META – ABSORBERS , Jephias Gwamuri

INVESTIGATION AND MODELING OF Al3(Sc, Zr) PRECIPITATION STRENGTHENING IN THE PRESENCE OF ENHANCED SUPERSATURATION AND WITHIN Al-Cu BINARY ALLOYS , Kyle Deane

Mechanically Induced Structural Changes in Molybdenum Disulfide , Prasad Pramod Soman

MODIFICATION OF ACTIVATED CARBON FOR SUPERCAPACITOR , Yan Xu

NANOSPHERE LITHOGRAPHY AND ITS APPLICATION IN RAPID AND ECONOMIC FABRICATION OF PLASMONIC HYDROGENATED AMORPHOUS SILICON PHOTOVOLTAIC DEVICES , Chenlong Zhang

Nd2Fe14B: (Nd1-x Dyx)2 Fe14B CORE-SHELL STRUCTURE FORMATION BY HOT PRESS LIQUID PHASE SINTERING , Li Chen

THE EFFECT OF SOLIDIFICATION RATE AND SOLUTIONIZING QUENCH RATE ON THE MECHANICAL PROPERTIES AND HARDENING RESPONSE OF ALUMINUM ALLOYS: A QUANTITATIVE COMPARISON , Rafael Gil-Figueroa

Thermomechanical Processing of Aluminum Micro-alloyed with Sc, Zr, Ti, B, and C , Cameron McNamara

Theses/Dissertations/Reports from 2015 2015

BIOCORROSION RATE AND MECHANISM OF METALLIC MAGNESIUM IN MODEL ARTERIAL ENVIRONMENTS , Patrick Bowen

COMPUTATIONAL STUDY OF MICROSTRUCTURE-PROPERTYMECHANISM RELATIONS IN FERROIC COMPOSITES , Fengde D. Ma

Failure Analysis of Blistered Organic Coatings on Gray Iron Castings , Matthew Tianen

Materials for Energy, Drug, and Information Storage , Peifu Cheng

MICROWAVE ASSISTED COMMUNITION OF SULFIDE ORE , Matthew D. Andriese

MODELING AND SIMULATION OF MICROSTRUCTURES, MECHANISMS, AND DIFFRACTION EFFECTS IN ENERGY MATERIALS: FERROELECTRICS AND LITHIUM ION BATTERY CATHODE MATERIALS , Jie Zhou

STRUCTURES, PROPERTIES AND FUNCTIONALITIES OF MAGNETIC DOMAIN WALLS IN THIN FILMS, NANOWIRES AND ATOMIC CHAINS: MICROMAGNETIC AND AB INITIO STUDIES , Liwei D. Geng

Reports/Theses/Dissertations from 2014 2014

DEVELOPMENT OF PRACTICAL APPLICATIONS FOR REPRAP STYLE 3-D PRINTERS IN ENGINEERING , Benjamin T. Wittbrodt

DEVELOPMENT OF PRECIPITATION HARDENABLE AL-SC-ZR-HF QUATERNARY ALLOYS THROUGH THERMODYNAMIC MODELING, AND ROOM-TEMPERATURE AND ELEVATED TEMPERATURE HARDNESS , Matthew J. Wong

MICROWAVE ABSORPTION PROPERTIES OF TIRES , Yuzhe Zhang

Nano-engineering of composite material via reactive mechanical alloying/milling (RMA/M) , Edward Andrew Laitila

SOLUTE-DERIVED THERMAL STABILITY OF NANOCRYSTALLINE ALUMINUM AND PROCESSING FACTOR INFLUENCE ON THE FORMATION OF AL6MN QUASICRYSTALS IN MELT-SPINNING , Andrew H. Baker

Reports/Theses/Dissertations from 2013 2013

Dysprosium transport in Nd-Fe-B pellets , Parawee Pumwongpitak

Faulted Structures in Li Ion Exchanged NaMO2 (M=Ni(0.25)Mn(0.75)) , Aaron M. DeWahl

Intergranular Corrosion and Stress Corrosion Cracking of Extruded AA6005A , David James Seguin

NICKEL-COBALT SOLID SOLUTION AND ITS APPLICATIONS AS CATALYSTS FOR CARBON DIOXIDE REFORMING OF METHANE , Sanchai Kuboon

PARAMETRIC STUDY OF REAXFF SIMULATION PARAMETERS FOR MOLECULAR DYNAMICS MODELING OF REACTIVE CARBON GASES , Benjamin David Jensen

PROPERTIES AND STRUCTURES OF Li-N BASED HYDROGEN STORAGE MATERIALS , Junqing Zhang

SYNTHESIS OF GRAPHENE AND ITS APPLICATIONS FOR DYE-SENSITIZED SOLAR CELLS , Hui Wang

The Processing of Aluminum Gasarites via Thermal Decomposition of Interstitial Hydrides , Joseph James Licavoli

Reports/Theses/Dissertations from 2012 2012

DIFFUSE-INTERFACE FIELD APPROACH TO MODELING SELF-ASSEMBLY OF HETEROGENEOUS COLLOIDAL SYSTEMS AND RELATED DIPOLE-DIPOLE INTERACTION PHENOMENA , Tianle Cheng

Effect of external electric field on hydrogen adsorption over activated carbon separated by dielectric materials , Zheng Zhang

Heat transfer in microwave heating , Zhiwei Peng

Microwave-assisted wet chemical (MAWC) synthesis of lithium iron phosphate , Shangzhao Shi

Molecular modeling of EPON 862-DETDA polymer , Ananyo Bandyopadhyay

Synthesis of novel solid materials from carbon dioxide and carbon monoxide , Yan Huo

THE USE OF LIFE-CYCLE ANALYSIS TO REDUCE THE ENVIRONMENTAL IMPACT OF MATERIALS IN MANUFACTURING , Megan A. Kreiger

Reports/Theses/Dissertations from 2011 2011

Effects of silicon content and cooling rate on mechanical properties of heavy section ductile cast iron , Meghan Haycock

• The Van Pelt and Opie Library
• About Digital Commons @ Michigan Tech
• Collections
• Disciplines

Advanced Search

• Notify me via email or RSS

Author Corner

• Content Policy
• Department of Materials Science and Engineering

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

Academia.edu no longer supports Internet Explorer.

To browse Academia.edu and the wider internet faster and more securely, please take a few seconds to  upgrade your browser .

Enter the email address you signed up with and we'll email you a reset link.

• We're Hiring!
• Help Center

MTech Thesis

With wireless communication becoming an integral part of human life, the improvement of the performance of any wireless network has become a topic of keen interest of the researchers. The path of propagation being wireless, the performance of the network is affected consequently by the topology and the environmental conditions of the area where the network is deployed. Hence, a study of the performance of the widely researched WiMAX network is performed under varying terrain and environmental conditions for various propagation models in this thesis. Also with 4G mobile networks coming up, the performance of the integrated WLAN-WiMAX network is also evaluated and compared with the existing WLAN and WiMAX technologies. Voice over IP is considered as the application as it is expected to be a low cost and thereby, a popular communication system in the next generation communication networks. The digitization of the analog voice signal before transmission is done by the voice codecs. Hence, a study of the performance of the networks and VoIP is also conducted here with different codecs for the three technologies. It is observed that the network performance is best for free space path loss model as it considers the communication path to be free from obstacles. Also the WLAN-WiMAX integrated network is observed to perform best among the three technologies with respect to network capacity and network performance.

Related Papers

Anindita Kundu

With wireless communication becoming an integral part of human life, the improvement of the performance of any wireless network has become a topic of keen interest of the researchers. The path of propagation being wireless, the performance of the network is affected consequently by the topology and the environmental conditions of the area where the network is deployed.

Hussein Harb

The improvement of the performance of any wireless network has become a topic of keen interest of the researchers. The path of propagation being wireless, the performance of the network is affected consequently by the topology and the environmental conditions of the area where the network is deployed. Hence, a study of the performance of the widely researched WiMAX network is performed under varying terrain and environmental conditions for various propagation models in this thesis. Also with 4G mobile networks coming up, the performance of the integrated WLAN-WiMAX network is also evaluated and compared with the existing WLAN and WiMAX technologies. Voice over IP is considered as the application as it is expected to be a low cost and thereby, a popular communication system in the next generation communication networks. The digitization of the analog voice signal before transmission is done by the voice codecs. Hence, a study of the performance of the networks and VoIP is also conducted here with different codecs for the three technologies. It is observed that the network performance is best for free space path loss model as it considers the communication path to be free from obstacles. Also the WLAN-WiMAX integrated network is observed to perform best among the three technologies with respect to network capacity and network performance.

Majlesi Journal of Telecommunication Devices

Ahmadreza Shekarchizadeh

With the growth of wireless networks in urban Community integration hypothesis is further strengthened. This is the most important WIMAX network. Due to the high bandwidth, the urban area of ​​mobility and technology. Will be suitable for VoIP services. In VoIP services over WIMAX network Quality assurance requirements and provide greater capacity; the main topics of research. WIMAX networks for each service provider, VoIP service to more users would be very desirable, the customer or the user expects Quality is acceptable for conversation. Important issues such as delay, Delay and delay variation, a major role in the quality of their VoIP services. Keywords : Wireless networks, transmission of voice, VoIP Optimization

International Journal of Computer Applications

Mohammed Tarique

International Journal of Wireless and Microwave Technologies

pranav balipadi

Nasir Touheed

VoIP is a technology in great demand these days. Its interactive nature makes it very appealing for users and today it is one of the most dominant technologies for communication. With the growth over wireless networks the option to have voice communication over wireless has been considered- the choices are VoIP over WiFi or VoIP over WiMax. This paper studies and compares the two options and summarizes the results.

Maurits Wattimena

WiMAX (Worldwide Interoperability for Microwave Access) is broadband wireless technology for providing last mile solutions for supporting higher bandwidth and multiple service classes with various quality of service requirement. In this paper we concentrated on the applications of the WiMAX in our daily life. The paper constructed three scenarios by using OPNET modeler 14.5. First: WiMAX connection, to examine its efficiency to connection from base station to the WiMAX work station, it is found that the less number of work stations and the less distances gave a better performance for WiMAX. Second: WLAN-WiMAX to test the single FTP performance, It is observed the FTP drop dramatically when the Distance Between work station and WLAN router increases. Third: Effect of base frequency for the WiMAX network, it found that the lower base frequency (2.4GHz) The higher performance of WIMAX network.

International Journal of Engineering Research and Technology (IJERT)

IJERT Journal

https://www.ijert.org/performance-evaluation-of-wimax-network https://www.ijert.org/research/performance-evaluation-of-wimax-network-IJERTV1IS8494.pdf WiMAX networks, built on all-IP network architecture for plug and play network deployments, can support a mix of different usage and service models. While some consider mobile WiMAX as a candidate for the fourth generation of mobile networks, others view it as the first generation of mobile Internet technologies emerging from a wider ecosystem targeting to extend the success of WiFi over wide area networks supporting mobility. WiMAX is one of the important broadband wireless technologies .Being an emerging technology, WiMAX supports multimedia applications such as voice over IP (VoIP), voice conference and online gaming The use of different modulation schemes like QPSK, QAM gives better flexibility for WiMAX network. In this paper, we analysed and simulated the different modulation schemes for WiMAX.

RELATED PAPERS

roly quellca

Oxford University Press

Nikolaus L Overtoom

Riccardo Rebonato

G. Stegmaier & F. Damminger, Wo einst der Hammer fiel. Archäologie in Deutschland 3, 2022, 50–51.

Gerd Stegmaier

Getahun Tiruye

Actualidad jurídica iberoamericana

raffaele aveta

Pure and Applied Geophysics

Mahmoud Mekkawi

Fertility and Sterility

cesar cervantes

Physical Review D

Fernando Ruiz

International Journal of Recent Trends in Engineering and Research

Revista Trabalho Necessário

Sonia Maria Portella Kruppa

Samba shiva

Applied Mathematics & Information Sciences

Boris Escalante

teruo nomura

Abdi Dharma

ramona dyah safitri

El Universal

José Octavio Islas Carmona

Siti nur annisa

siti nur annisa

Journal of Physics: Condensed Matter

Felix Ritort

Amir Khazraei

Uluslararası Ekonomi ve Yenilik Dergisi

ersin KIRAL

American Journal of Public Health

William Darrow

Jurnal ELTIKOM

Akhdiat Qudratullah

Open Journal of Epidemiology

Asmaa Belala

•   We're Hiring!
•   Help Center
• Find new research papers in:
• Health Sciences
• Earth Sciences
• Cognitive Science
• Mathematics
• Computer Science
• Academia ©2024

DSpace JSPUI

Dspace preserves and enables easy and open access to all types of digital content including text, images, moving images, mpegs and data sets.

• Shodhbhagirathi @ IITR
• NANOTECHNOLOGY

MASTERS' THESES (Nano tech) Collection home page

• 1 Anand, Ankur
• 1 Bind, Umesh Chandra
• 1 Bisht, Anuj
• 1 Chandra, Sushil
• 1 Dass, H. S.
• 1 Devi, Pooja
• 1 Firdoz, Shaik
• 1 Goel, Shreya
• 1 Jain, K. G. S.
• 24 NANOTECHNOLOGY
• 8 CIVIL ENGINEERING
• 1 16 CONICAL
• 1 BEARING CAPACITY
• 1 BUILDING ELEMENTS
• 1 DRAINAGE PROBLEM
• 1 DYE-SENSITIZED SOLAR CELLS
• 1 EARTHQUAKE
• 1 EARTHQUAKE RESISTANT DESIGN
• 1 ELECTRODE MODIFICATION
• 24 2010 - 2012
• 8 1970 - 1979
• 4 Jayaganthan, R.
• 3 Daniel, B. S. S.
• 3 Yadav, K. L.
• 2 Dutta, R. K.
• 2 Kumar, Anil
• 2 Manhas, Sanjeev
• 2 Singh, Dharmendra
• 2 Verma, G. D.
• 1 Agarwal, K. B.
• 1 Agarwal, Vijaya

Indian Institute of Technology Bombay

Centre for technology alternatives for rural areas (ctara).

• HOD's Message
• CTARA Brochure
• MDP Students
• M Tech First Year Students
• M Tech Second Year Students
• PhD Students
• Rural Technology Action Group (RuTAG)
• Nutrition Group
• Unnat Bharat Abhiyan (UBA)
• Unnat Maharashtra Abhiyan (UMA)
• Technology and Development Solutions Cell
• Sustainable Energy and Entrepreneurial Development (SEED)
• Potential PhD topics
• Previous Papers
• M. Tech Admissions
• MDP Admissions
• Course Structure
• Summer Field Stay 2015 Listing
• Summer Field Stay 2016 Listing
• Summer Field Stay 2017 Listing
• Institute Information Brochure

M.Tech Project Reports

• Institute Information Brouchure
• M Tech Placements
• Events archive
• News Archive
• CTARA Academic Calendar
• Photo Gallery
• Video Gallery
• CSR Study Unit
• Innovations

Search form

By Year Wise

M.Tech Project Reports 2019-2021

M.Tech Project Reports 2018-2020

M.Tech Project Reports 2017-2019

M.Tech Project Reports 2016-2018

M.Tech Project Reports 2015-2017

M.Tech Project Reports 2014-2016

M.Tech Project Reports 2013-2015

M.Tech Project Reports 2012-2014

M.Tech Project Reports 2011-2013

M.Tech Project Reports 2010-2012

M.Tech Project Reports 2009-2011

M.Tech Project Reports 2008-2010

© 2019 CTARA, IIT Bombay. All rights reserved

• Maintained by IT team

ScholarWorks@UMass Amherst

Home > Engineering > CEE > CE_THESES

Civil Engineering Masters Theses Collection

Theses from 2024 2024.

Machine and Statistical Learning for Sustainable Infrastructure and Mobility Systems , Atanas Apostolov, Civil Engineering

Theses from 2023 2023

The Current State of Practice of Building Information Modeling , Kevin P. Brooks, Civil Engineering

Loads Analysis of Fixed-Bottom and Floating Offshore Wind Structures , Michael G. Davis, Civil Engineering

Comparison Of Scaling Performance Between Sidewalks Placed Using Hot and Cold Weather Concreting Procedures , Likhitha Rudraraju, Civil Engineering

CORRELATION BETWEEN LABORATORY TESTING RESULTS AND IN-SITU SIDEWALK SCALING , Brian R. Shea, Civil Engineering

The Effects of Hurricane Wind Field Characteristics on Wind Blade Loads , Michael S. Tsai, Civil Engineering

Post-Fire Damage Inspection of Concrete Tunnel Structures , James Viglas, Civil Engineering

Theses from 2022 2022

Measuring Accessibility to Food Services to Improve Public Health , Efthymia Kostopoulou, Civil Engineering

Euplectella Aspergillum’s Natural Lattice Structure for Structural Design & Stability Landscape of Thin Cylindrical Shells with Dimple Imperfections , Zoe Y. Sloane, Civil Engineering

Theses from 2021 2021

Post-Fire Assessment of Concrete Tunnel Structures , Nicholas C. Menz, Civil Engineering

Utilizing Unmanned Aerial Vehicles (UAVs) for the Estimation of Beam Corrosion of Steel Bridge Girders , Gabrielle Pryor, Civil Engineering

Parametric Study of Integral Abutment Bridge Using Finite Element Model , Asako Takeuchi, Civil Engineering

Theses from 2020 2020

School Bus Routing To Allow Later School Start Times , Rana Eslamifard, Civil Engineering

QUANTIFICATION OF THERMAL BRIDGING EFFECTS IN COLD-FORMED STEEL WALL ASSEMBLIES , Divyansh Kapoor, Civil Engineering

Theses from 2019 2019

Sustainable Travel Incentives Optimization in Multimodal Networks , Hossein Ghafourian, Civil Engineering

High Fidelity Modeling of Cold-Formed Steel Single Lap Shear Screw Fastened Connections , Rita Kalo, Civil Engineering

Modeling the Effect of New Commuter Bus Service on Demand and the Impact on GHG Emissions: Application to Greater Boston , Christopher Lyman, Civil Engineering

Performance of Concrete Tunnel Systems Subject to Fault Displacement , Michael Morano, Civil Engineering

Behavior of Prestressed Concrete Bridges with Closure Pour Connections and Diaphragms , Gercelino Ramos, Civil Engineering

Analysis of Adhesive Anchorage Systems Under Extreme In-Service Temperature Conditions , Rachel Wang, Civil Engineering

Theses from 2018 2018

Driver Understanding of the Flashing Yellow Arrow and Dynamic No Turn on Red Sign for Right Turn Applications , Elizabeth Casola, Civil Engineering

Evaluating the Impact of Double-Parked Freight Deliveries on Signalized Arterial Control Delay Using Analytical Models and Simulation , Aaron J. Keegan, Civil Engineering

Reward Allocation For Maximizing Energy Savings In A Transportation System , Adewale O. Oduwole, Civil Engineering

Impact of S-Curve on Speed in a Modern Roundabout , Akshaey Sabhanayagam, Civil Engineering

All-Red Clearance Intervals for Use in the Left-Turn Application of Flashing Yellow Arrows , Francis Tainter, Civil Engineering

Theses from 2017 2017

Evaluation of New England Bridges for Bat Roosting Including Methodology and Case Studies , Angela Berthaume, Civil Engineering

Evaluating Variances Between Departments of Transportation in New England to Create a Strategic Transportation Workforce , Chelsea Bouchard, Civil Engineering

Development of High Early-Strength Concrete for Accelerated Bridge Construction Closure Pour Connections , Stephanie Castine, Civil Engineering

I. THE HIGH STRAIN RATE RESPONSE OF HOLLOW SPHERE STEEL FOAM; II. THE DYNAMIC RESPONSE OF AN AMERICAN ELM TREE , Ignacio Cetrangolo, Civil Engineering

Performance of Adhesive and Cementitious Anchorage Systems , Mirna Mendoza, Civil Engineering

Theses from 2016 2016

Integrated Solar Technologies with Outdoor Pedestrian Bridge Superstructure Decking , Richard K. Racz, Civil Engineering

LIVE LOAD DISTRIBUTION FACTORS FOR HORIZONTALLY CURVED CONCRETE BOX GIRDER BRIDGES , Mohammed Zaki, Civil Engineering

Theses from 2015 2015

Bonded Anchors in Concrete Under Sustained Loading , Douglas Droesch, Civil Engineering

An Observational Evaluation of Safety Resulting from Driver Distraction , Christina M. Dube, Civil Engineering

Measuring the Resilience of Transportation Networks Subject to Seismic Risk , Mark N. Furtado, Civil Engineering

Nano-Scale Investigation of Mechanical Characteristics of Main Phases of Hydrated Cement Paste , Shahin Hajilar, Civil Engineering

Driver Behavior Evaluation of Variable Speed Limits and a Conceptual Framework for Optimal VSL Location Identification , Curt P. Harrington, Civil Engineering

A Real-time Signal Control System to Minimize Emissions at Isolated Intersections , Farnoush Khalighi, Civil Engineering

Structural Vulnerability Assessment of Bridge Piers in the Event of Barge Collision , David A. Ribbans, Civil Engineering

Towards Sustainable Roundabouts: An Evaluation of Driver Behavior, Emissions, and Safety , Derek Roach, Civil Engineering

Resilience of Transportation Infrastructure Systems to Climatic Extreme Events , Alexandra C. Testa, Civil Engineering

Theses from 2014 2014

Short and Long-term Performance of a Skewed Integral Abutment Prestressed Concrete Bridge , Rami Bahjat, Civil Engineering

Performance of Circular Reinforced Concrete Bridge Piers Subjected to Vehicular Collisions , Nevin L. Gomez, Civil Engineering

Field and Analytical Studies of the First Folded Plate Girder Bridge , Man Hou Sit, Civil Engineering

Theses from 2013 2013

The Effect of Roadside Elements on Driver Behavior and Run-Off-the-Road Crash Severity , Cole D. Fitzpatrick, Civil Engineering

Evaluating At-Grade Rail Crossing Safety along the Knowledge Corridor in Massachusetts , Timothy P. Horan, Civil Engineering

An Evaluation of Alternative Technologies to Estimate Travel Time on Rural Interstates , Qiao Li, Civil Engineering

Operational and Safety-based Analyses of Varied Toll Lane Configurations , Ian A. Mckinnon, Civil Engineering

Preferred Sensor Selection for Damage Estimation in Civil Structures , Matthew Styckiewicz, Civil Engineering

An Evaluation of Drivers’ Cell Phone Use Prevalence and Safety Related Impacts , Keith E. Wenners, Civil Engineering

Theses from 2012 2012

Probabilistic Analysis of Offshore Wind Turbine Soil-Structure Interaction , Wystan Carswell, Civil Engineering

Vehicle Miles Traveled (vmt) Fee Financing Alternatives: Lessons Learned and Future Opportunities , Ashley L. Costa, Civil Engineering

Evaluating and Modeling Traveler Response to Real-Time Information in the Pioneer Valley , Tyler De Ruiter, Civil Engineering

An Optimal Adaptive Routing Algorithm for Large-scale Stochastic Time-Dependent Networks , Jing Ding, Civil Engineering

A Quantitative Analysis of the Impacts from Selected Climate Variables Upon Traffic Safety in Massachusetts , Katrina M. Hecimovic, Civil Engineering

Automated Enforcement Using Dedicated Short Range Communication , Gilbert Kim, Civil Engineering

New Technologies in Short Span Bridges: A Study of Three Innovative Systems , Andrew Lahovich, Civil Engineering

Driver Dynamics and the Longitudinal Control Model , Gabriel G. Leiner, Civil Engineering

Interfacial Strength Between Prestressed Hollow Core Slabs and Cast-in-Place Concrete Toppings , Ryan M. Mones, Civil Engineering

User Equilibrium in a Disrupted Network with Real-Time Information and Heterogeneous Risk Attitude , Ryan J. Pothering, Civil Engineering

Spatial and Temporal Correlations of Freeway Link Speeds: An Empirical Study , Piotr J. Rachtan, Civil Engineering

Evaluation of Live-Load Distribution Factors (LLDFs) of Next Beam Bridges , Abhijeet Kumar Singh, Civil Engineering

Material Characterization and Computational Simulation of Steel Foam for Use in Structural Applications , Brooks H. Smith, Civil Engineering

Varied Applications of Work Zone Safety Analysis through the Investigation of Crash Data, Design, and Field Studies , Erica Swansen, Civil Engineering

Using Micro-Simulation Modeling to Evaluate Transit Signal Priority in Small-to-Medium Sized Urban Areas; Comparative Review of Vissim and S-Paramics Burlington, Vermont Case Study , Joseph C. Tyros, Civil Engineering

Theses from 2011 2011

Evaluating Alternative Toll-Based Financing Approaches: A Case Study of the Boston Metropolitan Area , Rosaria M. Berliner, Civil Engineering

Analysis of Measurement Errors Influence on the Quantitative and Qualitative Results of Car-Following Model Calibration , Mariya A. Maslova, Civil Engineering

Development of Anchorage System for Frp Strengthening Applications Using Integrated Frp Composite Anchors , Geoffrey N. Mcguirk, Civil Engineering

An Application of Spatially Based Crash Analyses and Road Safety Investigations to Increase Older Driver Safety , Deanna A. Peabody, Civil Engineering

Safety and Operational Assessment of Gap Acceptance Through Large-Scale Field Evaluation , Steven Maxwell Tupper, Civil Engineering

Theses from 2010 2010

Historic Bridge Evaluation Using Finite Element Techniques , Helena M. Charron, Civil Engineering

A Quantitative Analysis of the Impacts from Selected Variables Upon Safety Belt Usage in Massachusetts , Samuel W. Gregorio, Civil Engineering

Analysis of Curved Integral Abutment Bridges , Emre Kalayci, Civil Engineering

Material Characterization and Structural Response of Historic Truss Bridges , Sean L. Kelton, Civil Engineering

Earthquake Engineering Simulation with Flexible Cladding System , Jun Jie Li, Civil Engineering

Route Choice Behavior in Risky Networks with Real-Time Information , Michael D. Razo, Civil Engineering

Route Choice Behavior in a Driving Simulator With Real-time Information , Hengliang Tian, Civil Engineering

Investigation of the Behavior of Open Cell Aluminum Foam , Patrick J. Veale, Civil Engineering

Theses from 2009 2009

Computer-Assisted Emergency Evacuation Planning Using TransCAD: Case Studies in Western Massachusetts , Steven P. Andrews, Civil Engineering

Value of Traveler Information for Adaptive Routing in Stochastic Time-Dependent Networks , He Huang, Civil Engineering

Analytical Modeling of Tree Vibration Generated during Cutting Process , Payman Karvanirabori, Civil Engineering

Optimal Adaptive Departure Time Choices with Real-Time Traveler Information Considering Arrival Reliability , Xuan Lu, Civil Engineering

Seismic Energy Dissipation of Steel Buildings Using Engineered Cladding Systems , Quan Viet Nguyen, Civil Engineering

Developing an Evaluation Approach to Assess Large Scale Its Infrastructure Improvements: I-91 Project , Melissa Paciulli, Civil Engineering

Enhancing Concrete Barrier Reflectivity With A Focus On Recycled Glass Aggregate Replacement , Regina Shklyan, Civil Engineering

Theses from 2008 2008

Performance Evaluation Of Existing Steel And Concrete Girder Bridges Through Non-destructive Live-load Testing , Andrew E. Jeffrey, Civil Engineering

Evaluation of Traffic Simulation Models for Work Zones in the New England Area , Pothu Raju Khanta, Civil Engineering

The Application of Traffic Calming and Related Strategies in an Urban Environment , Stacy A. Metzger, Civil Engineering

Terrazzo Cracking: Causes and Remedies , Michael J. Mitchell III, Civil Engineering

Anchorage of Carbon Fiber Reinforced Polymers to Reinforced Concrete in Shear Applications , Carl W. Niemitz, Civil Engineering

Measurement and Computational Modeling of the Mechanical Properties of Parallel Strand Lumber , Russell S. Winans, Civil Engineering

An Evaluation of Simulation Models To Assess Travel Delay In Work Zones , Fan Wu, Civil Engineering

Theses from 2007 2007

An Analysis Of The Saftey Effects Of Crosswalks With In-pavement Warning Lights , George Gadiel, Civil Engineering

The Development of a Dynamic-Interactive-Vehicle Model for Modeling Traffic Beyond the Microscopic Level , Dwayne A. Henclewood, Civil Engineering

A Comparative Evaluation of Crash Data Quality Identification Methods , Arianna M. Mickee, Civil Engineering

Advanced Search

• Notify me via email or RSS
• Collections
• Disciplines

Author Corner

• Login for Faculty Authors
• Faculty Author Gallery
• Expert Gallery
• University Libraries
• Civil and Environmental Engineering Department
• UMass Amherst

This page is sponsored by the University Libraries.

© 2009 University of Massachusetts Amherst • Site Policies

Privacy Copyright