assignment operators example in r

Secure Your Spot in Our PCA Online Course Starting on April 02 (Click for More Info)

Assignment Operators in R (3 Examples) | Comparing = vs. ＜- vs. ＜＜-

On this page you’ll learn how to apply the different assignment operators in the R programming language .

The content of the article is structured as follows:

Let’s dive right into the exemplifying R syntax!

Example 1: Why You Should Use ＜- Instead of = in R

Generally speaking, there is a preference in the R programming community to use an arrow (i.e. ＜-) instead of an equal sign (i.e. =) for assignment.

In my opinion, it makes a lot of sense to stick to this convention to produce scripts that are easy to read for other R programmers.

However, you should also take care about the spacing when assigning in R. False spacing can even lead to error messages .

For instance, the following R code checks whether x is smaller than minus five due to the false blank between ＜ and -:

A properly working assignment could look as follows:

However, this code is hard to read, since the missing space makes it difficult to differentiate between the different symbols and numbers.

In my opinion, the best way to assign in R is to put a blank before and after the assignment arrow:

As mentioned before, the difference between ＜- and = is mainly due to programming style . However, the following R code using an equal sign would also work:

In the following example, I’ll show a situation where ＜- and = do not lead to the same result. So keep on reading!

Example 2: When ＜- is Really Different Compared to =

In this Example, I’ll illustrate some substantial differences between assignment arrows and equal signs.

Let’s assume that we want to compute the mean of a vector ranging from 1 to 5. Then, we could use the following R code:

However, if we want to have a look at the vector x that we have used within the mean function, we get an error message:

Let’s compare this to exactly the same R code but with assignment arrow instead of an equal sign:

The output of the mean function is the same. However, the assignment arrow also stored the values in a new data object x:

This example shows a meaningful difference between = and ＜-. While the equal sign doesn’t store the used values outside of a function, the assignment arrow saves them in a new data object that can be used outside the function.

Example 3: The Difference Between ＜- and ＜＜-

So far, we have only compared ＜- and =. However, there is another assignment method we have to discuss: The double assignment arrow ＜＜- (also called scoping assignment).

The following code illustrates the difference between ＜- and ＜＜- in R. This difference mainly gets visible when applying user-defined functions .

Let’s manually create a function that contains a single assignment arrow:

Now, let’s apply this function in R:

The data object x_fun1, to which we have assigned the value 5 within the function, does not exist:

Let’s do the same with a double assignment arrow:

Let’s apply the function:

And now let’s return the data object x_fun2:

As you can see based on the previous output of the RStudio console, the assignment via ＜＜- saved the data object in the global environment outside of the user-defined function.

Video & Further Resources

I have recently released a video on my YouTube channel , which explains the R syntax of this tutorial. You can find the video below:

The YouTube video will be added soon.

In addition to the video, I can recommend to have a look at the other articles on this website.

• R Programming Examples

In summary: You learned on this page how to use assignment operators in the R programming language. If you have further questions, please let me know in the comments.

assignment-operators-in-r How to use different assignment operators in R – 3 R programming examples – R programming language tutorial – Actionable R programming syntax in RStudio

Subscribe to the Statistics Globe Newsletter

Get regular updates on the latest tutorials, offers & news at Statistics Globe. I hate spam & you may opt out anytime: Privacy Policy .

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Post Comment

I’m Joachim Schork. On this website, I provide statistics tutorials as well as code in Python and R programming.

Statistics Globe Newsletter

Get regular updates on the latest tutorials, offers & news at Statistics Globe. I hate spam & you may opt out anytime: Privacy Policy .

Related Tutorials

match.fun Function in R (Example)

The nrow Function in R (4 Examples)

Popular Tutorials

Popular examples, learn python interactively, r introduction.

• R Reserved Words
• R Variables and Constants

R Operators

• R Operator Precedence and Associativitys

R Flow Control

• R if…else Statement

R ifelse() Function

• R while Loop
• R break and next Statement
• R repeat loop
• R Functions
• R Return Value from Function
• R Environment and Scope
• R Recursive Function

R Infix Operator

• R switch() Function

R Data Structures

• R Data Frame

R Object & Class

• R Classes and Objects
• R Reference Class

R Graphs & Charts

• R Histograms
• R Pie Chart
• R Strip Chart

R Advanced Topics

• R Plot Function
• R Multiple Plots
• Saving a Plot in R
• R Plot Color

Related Topics

R Operator Precedence and Associativity

R Program to Add Two Vectors

In this article, you will learn about different R operators with the help of examples.

R has many operators to carry out different mathematical and logical operations. Operators perform tasks including arithmetic, logical and bitwise operations.

• Type of operators in R

Operators in R can mainly be classified into the following categories:

• Arithmetic Operators
• Relational Operators
• Logical Operators
• Assignment Operators
• R Arithmetic Operators

These operators are used to carry out mathematical operations like addition and multiplication. Here is a list of arithmetic operators available in R.

Let's look at an example illustrating the use of the above operators:

• R Relational Operators

Relational operators are used to compare between values. Here is a list of relational operators available in R.

Let's see an example for this:

• Operation on Vectors

The above mentioned operators work on vectors . The variables used above were in fact single element vectors.

We can use the function c() (as in concatenate) to make vectors in R.

All operations are carried out in element-wise fashion. Here is an example.

When there is a mismatch in length (number of elements) of operand vectors, the elements in the shorter one are recycled in a cyclic manner to match the length of the longer one.

R will issue a warning if the length of the longer vector is not an integral multiple of the shorter vector.

• R Logical Operators

Logical operators are used to carry out Boolean operations like AND , OR etc.

Operators & and | perform element-wise operation producing result having length of the longer operand.

But && and || examines only the first element of the operands resulting in a single length logical vector.

Zero is considered FALSE and non-zero numbers are taken as TRUE . Let's see an example for this:

• R Assignment Operators

These operators are used to assign values to variables.

The operators <- and = can be used, almost interchangeably, to assign to variables in the same environment.

The <<- operator is used for assigning to variables in the parent environments (more like global assignments). The rightward assignments, although available, are rarely used.

Check out these examples to learn more:

• Add Two Vectors
• Take Input From User
• R Multiplication Table

Table of Contents

• Introduction

Sorry about that.

R Tutorials

Programming

Introduction

• R installation
• Working directory
• Getting help
• Install packages

Data structures

Data Wrangling

• Sort and order
• Merge data frames

Programming

• Creating functions
• If else statement
• apply function
• sapply function
• tapply function

Import & export

• Read TXT files
• Import CSV files
• Read Excel files
• Read SQL databases
• Export data
• plot function
• Scatter plot
• Density plot
• Tutorials Introduction Data wrangling Graphics Statistics See all

R operators

There are several operators in R, such that arithmetic operators for math calculations, logical, relational or assignment operators or even the popular pipe operator. In this tutorial we will show you the R operators divided into operator types. In addition, we will show examples of use of every operator.

Arithmetic operators

The R arithmetic operators allows us to do math operations , like sums, divisions or multiplications, among others. The following table summarizes all base R arithmetic operators.

In the next block of code you will find examples of basic calculations with arithmetic operations with integers.

You can also use the basic operations with R vectors of the same length . Note that the result of these operations will be a vector with element-wise operation results.

Furthermore, you can use those arithmetic operators with matrix objects, besides the ones designed for this type of object (matrix multiplication types). Check our tutorial about matrix operations to learn more.

Logical / boolean operators

In addition, boolean or logical operators in R are used to specify multiple conditions between objects. These comparisons return TRUE and FALSE values.

Relational / comparison operators in R

Comparison or relational operators are designed to compare objects and the output of these comparisons are of type boolean. To clarify, the following table summarizes the R relational operators.

For example, you can compare integer values with these operators as follows.

If you compare vectors the output will be other vector of the same length and each element will contain the boolean corresponding to the comparison of the corresponding elements (the first element of the first vector with the first element of the second vector and so on). Moreover, you can compare each element of a matrix against other.

Assignment operators in R

The assignment operators in R allows you to assign data to a named object in order to store the data .

Note that in almost scripting programming languages you can just use the equal (=) operator. However, in R it is recommended to use the arrow assignment ( <- ) and use the equal sign only to set arguments.

The arrow assignment can be used as left or right assignment, but the right assignment is not generally used. In addition, you can use the double arrow assignment, known as scoping assignment, but we won’t enter in more detail in this tutorial, as it is for advanced users. You can know more about this assignment operator in our post about functions in R .

In the following code block you will find some examples of these operators.

If you need to use the right assignment remember that the object you want to store needs to be at the left, or an error will arise.

There are some rules when naming variables. For instance, you can use letters, numbers, dots and underscores in the variable name, but underscores can’t be the first character of the variable name.

Reserved words

There are also reserved words you can’t use, like TRUE , FALSE , NULL , among others. You can see the full list of R reserved words typing help(Reserved) or ?Reserved .

However, if for some reason you need to name your variable with a reserved word or starting with an underscore you will need to use backticks:

Miscellaneous R operators

Miscellaneous operators in R are operators used for specific purposes , as accessing data, functions, creating sequences or specifying a formula of a model. To clarify, the next table contains all the available miscellaneous operators in R.

In addition, in the following block of code we show several examples of these operators:

Infix operator

You can call an operator as a function . This is known as infix operators. Note that this type of operators are not generally used or needed.

Pipe operator in R

The pipe operator is an operator you can find in several libraries, like dplyr . The operator can be read as ‘AND THEN’ and its purpose is to simplify the syntax when writing R code. As an example, you could subset the cars dataset and then create a summary of the subset with the following code:

Learn how to plot your data in R with the base package and ggplot2

Free resource

PYTHON CHARTS

Learn how to create plots in Python with matplotlib, seaborn, plotly and folium

Related content

Convert objects to character with as.character()

Introduction to R

Use the as.character function to coerce R objects to character and learn how to use the is.character function to check if an object is character or not

Square root in R

R introduction

Use the sqrt function to compute the square root of any positive number and learn how to calculate the nth root for any positive number, such as the cube root

max, min, pmax and pmin functions in R

Use the max and min functions to get the maximum and minimum values of a vector or the pmax and pmin functions to return the maxima and minima between elements of vectors

Try adjusting your search query

👉 If you haven’t found what you’re looking for, consider clicking the checkbox to activate the extended search on R CHARTS for additional graphs tutorials, try searching a synonym of your query if possible (e.g., ‘bar plot’ -> ‘bar chart’), search for a more generic query or if you are searching for a specific function activate the functions search or use the functions search bar .

Assignment Operators

Description.

Assign a value to a name.

There are three different assignment operators: two of them have leftwards and rightwards forms.

The operators <- and = assign into the environment in which they are evaluated. The operator <- can be used anywhere, whereas the operator = is only allowed at the top level (e.g., in the complete expression typed at the command prompt) or as one of the subexpressions in a braced list of expressions.

The operators <<- and ->> are normally only used in functions, and cause a search to be made through parent environments for an existing definition of the variable being assigned. If such a variable is found (and its binding is not locked) then its value is redefined, otherwise assignment takes place in the global environment. Note that their semantics differ from that in the S language, but are useful in conjunction with the scoping rules of R . See ‘The R Language Definition’ manual for further details and examples.

In all the assignment operator expressions, x can be a name or an expression defining a part of an object to be replaced (e.g., z[[1]] ). A syntactic name does not need to be quoted, though it can be (preferably by backtick s).

The leftwards forms of assignment <- = <<- group right to left, the other from left to right.

value . Thus one can use a <- b <- c <- 6 .

Becker, R. A., Chambers, J. M. and Wilks, A. R. (1988) The New S Language . Wadsworth & Brooks/Cole.

Chambers, J. M. (1998) Programming with Data. A Guide to the S Language . Springer (for = ).

assign (and its inverse get ), for “subassignment” such as x[i] <- v , see [<- ; further, environment .

Assignment Operators in R

R provides two operators for assignment: <- and = .

Understanding their proper use is crucial for writing clear and readable R code.

Using the <- Operator

For assignments.

The <- operator is the preferred choice for assigning values to variables in R.

It clearly distinguishes assignment from argument specification in function calls.

Readability and Tradition

• This usage aligns with R’s tradition and enhances code readability.

Using the = Operator

The = operator is commonly used to explicitly specify named arguments in function calls.

It helps in distinguishing argument assignment from variable assignment.

Assignment Capability

• While = can also be used for assignment, this practice is less common and not recommended for clarity.

Mixing Up Operators

Potential confusion.

Using = for general assignments can lead to confusion, especially when reading or debugging code.

Mixing operators inconsistently can obscure the distinction between assignment and function argument specification.

• In the example above, x = 10 might be mistaken for a function argument rather than an assignment.

Best Practices Recap

Consistency and clarity.

Use <- for variable assignments to maintain consistency and clarity.

Reserve = for specifying named arguments in function calls.

Avoiding Common Mistakes

Be mindful of the context in which you use each operator to prevent misunderstandings.

Consistently using the operators as recommended helps make your code more readable and maintainable.

Quiz: Assignment Operator Best Practices

Which of the following examples demonstrates the recommended use of assignment operators in R?

• my_var = 5; mean(x = my_var)
• my_var <- 5; mean(x <- my_var)
• my_var <- 5; mean(x = my_var)
• my_var = 5; mean(x <- my_var)
• The correct answer is 3 . my_var <- 5; mean(x = my_var) correctly uses <- for variable assignment and = for specifying a named argument in a function call.

Assignment Operators

Description.

Assign a value to a name.

There are three different assignment operators: two of them have leftwards and rightwards forms.

The operators <- and = assign into the environment in which they are evaluated. The operator <- can be used anywhere, whereas the operator = is only allowed at the top level (e.g., in the complete expression typed at the command prompt) or as one of the subexpressions in a braced list of expressions.

The operators <<- and ->> are normally only used in functions, and cause a search to be made through parent environments for an existing definition of the variable being assigned. If such a variable is found (and its binding is not locked) then its value is redefined, otherwise assignment takes place in the global environment. Note that their semantics differ from that in the S language, but are useful in conjunction with the scoping rules of R . See ‘The R Language Definition’ manual for further details and examples.

In all the assignment operator expressions, x can be a name or an expression defining a part of an object to be replaced (e.g., z[[1]] ). A syntactic name does not need to be quoted, though it can be (preferably by backtick s).

The leftwards forms of assignment <- = <<- group right to left, the other from left to right.

value . Thus one can use a <- b <- c <- 6 .

Becker, R. A., Chambers, J. M. and Wilks, A. R. (1988) The New S Language . Wadsworth & Brooks/Cole.

Chambers, J. M. (1998) Programming with Data. A Guide to the S Language . Springer (for = ).

assign (and its inverse get ), for “subassignment” such as x[i] <- v , see [<- ; further, environment .

Assignment Operators

Description.

Assign a value to a name.

There are three different assignment operators: two of them have leftwards and rightwards forms.

The operators <- and = assign into the environment in which they are evaluated. The operator <- can be used anywhere, whereas the operator = is only allowed at the top level (e.g., in the complete expression typed at the command prompt) or as one of the subexpressions in a braced list of expressions.

The operators <<- and ->> cause a search to made through the environment for an existing definition of the variable being assigned. If such a variable is found then its value is redefined, otherwise assignment takes place globally. Note that their semantics differ from that in the S language, but are useful in conjunction with the scoping rules of R . See ‘The R Language Definition’ manual for further details and examples.

In all the assignment operator expressions, x can be a name or an expression defining a part of an object to be replaced (e.g., z[[1]] ). The name does not need to be quoted, though it can be.

The leftwards forms of assignment <- = <<- group right to left, the other from left to right.

value . Thus one can use a <- b <- c <- 6 .

Becker, R. A., Chambers, J. M. and Wilks, A. R. (1988) The New S Language . Wadsworth & Brooks/Cole.

Chamber, J. M. (1998) Programming with Data. A Guide to the S Language . Springer (for = ).

assign , environment .

Introduction to R

Assignment operators.

You can assign values or functions to R objects using <- operator.

assignOps: Assignment Operators

Assignment operators, description.

Assign a value to a name.

There are three different assignment operators: two of them have leftwards and rightwards forms.

The operators <- and = assign into the environment in which they are evaluated. The operator <- can be used anywhere, whereas the operator = is only allowed at the top level (e.g., in the complete expression typed at the command prompt) or as one of the subexpressions in a braced list of expressions.

The operators <<- and ->> are normally only used in functions, and cause a search to be made through parent environments for an existing definition of the variable being assigned. If such a variable is found (and its binding is not locked) then its value is redefined, otherwise assignment takes place in the global environment. Note that their semantics differ from that in the S language, but are useful in conjunction with the scoping rules of R . See ‘The R Language Definition’ manual for further details and examples.

In all the assignment operator expressions, x can be a name or an expression defining a part of an object to be replaced (e.g., z[[1]] ). A syntactic name does not need to be quoted, though it can be (preferably by backticks).

The leftwards forms of assignment <- = <<- group right to left, the other from left to right.

value . Thus one can use a <- b <- c <- 6 .

Becker, R. A., Chambers, J. M. and Wilks, A. R. (1988) The New S Language . Wadsworth & Brooks/Cole.

Chambers, J. M. (1998) Programming with Data. A Guide to the S Language . Springer (for = ).

assign (and its inverse get ), for “subassignment” such as x[i] <- v , see [<- ; further, environment .

R Package Documentation

Browse r packages, we want your feedback.

Add the following code to your website.

REMOVE THIS Copy to clipboard

For more information on customizing the embed code, read Embedding Snippets .

R Data Structures

R statistics, r operators.

Operators are used to perform operations on variables and values.

In the example below, we use the + operator to add together two values:

R divides the operators in the following groups:

• Arithmetic operators
• Assignment operators
• Comparison operators
• Logical operators
• Miscellaneous operators

R Arithmetic Operators

Arithmetic operators are used with numeric values to perform common mathematical operations:

R Assignment Operators

Assignment operators are used to assign values to variables:

Note: <<- is a global assigner. You will learn more about this in the Global Variable chapter .

It is also possible to turn the direction of the assignment operator.

x <- 3 is equal to 3 -> x

Advertisement

R Comparison Operators

Comparison operators are used to compare two values:

R Logical Operators

Logical operators are used to combine conditional statements:

R Miscellaneous Operators

Miscellaneous operators are used to manipulate data:

Note: You will learn more about Matrix multiplication and matrices in a later chapter.

COLOR PICKER

Contact Sales

If you want to use W3Schools services as an educational institution, team or enterprise, send us an e-mail: [email protected]

Report Error

If you want to report an error, or if you want to make a suggestion, send us an e-mail: [email protected]

Top Tutorials

Top references, top examples, get certified.

R Operators

Operators are used to perform operations on values and variables. The R operators are classified into six different categories:

• Arithmetic operators
• Comparison operators
• Logical operators
• Element-wise Logical operators
• Membership operators
• Assignment operators

Arithmetic Operators

Arithmetic operators are used to perform simple mathematical operations on numeric values and vectors.

Here are some examples:

All the basic arithmetic operators can be performed on pairs of vectors . Each operation is performed in an element-by-element manner.

Comparison Operators

Comparison operators are used to compare two values or vectors.

Logical Operators

Logical operators are used to join two or more conditions.

Element-wise Logical Operators

These operators are used to perform logical operations on vectors in an element-by-element manner.

Membership Operator

Membership operator is used to check if a specific item is present in the vector or the list.

Assignment Operators

Assignment operators are used to assign new values to variables.

Miscellaneous Operators

These operators are used to for special purposes.

Operator Precedence (Order of Operations)

In R, every operator is assigned precedence. Operator Precedence determines which operations are performed before which other operations.

Operators of highest precedence are performed first.

Blog of Ken W. Alger

Just another Tech Blog

Assignment Operators in R – Which One to Use and Where

Assignment Operators

R has five common assignment operators:

Many style guides and traditionalists prefer the left arrow operator, <- . Why use that when it’s an extra keystroke?  <- always means assignment. The equal sign is overloaded a bit taking on the roles of an assignment operator, function argument binding, or depending on the context, case statement.

Equal or “arrow” as an Assignment Operator?

In R, both the equal and arrow symbols work to assign values. Therefore, the following statements have the same effect of assigning a value on the right to the variable on the left:

There is also a right arrow, -> which assigns the value on the left, to a variable on the right:

All three assign the  value of forty-two to the  variable   x .

So what’s the difference? Are these assignment operators interchangeable? Mostly, yes. The difference comes into play, however, when working with functions.

The equal sign can also work as an operator for function parameters.

x <- 42 y <- 18 function(value = x-y)

History of the <- Operator

The S language also didn’t have == for equality testing, so that was left to the single equal sign. Therefore, variable assignment needed to be accomplished with a different symbol, and the arrow was chosen.

There are some differences of opinion as to which assignment operator to use when it comes to = vs <-. Some believe that = is more clear. The <- operator maintains backward compatibility with S.  Google’s R Style Guide recommends using the <- assignment operator, which seems to be a pretty decent reason as well. When all is said and done, though, it is like many things in programming, it depends on what your team does.

Share this:

• Click to share on Twitter (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to print (Opens in new window)

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Notify me of follow-up comments by email.

Notify me of new posts by email.

This site uses Akismet to reduce spam. Learn how your comment data is processed .

• TutorialKart
• SAP Tutorials
• Salesforce Admin
• Salesforce Developer
• Visualforce
• Informatica
• Kafka Tutorial
• Spark Tutorial
• Tomcat Tutorial
• Python Tkinter

Programming

• Bash Script
• Julia Tutorial
• CouchDB Tutorial
• MongoDB Tutorial
• PostgreSQL Tutorial
• Android Compose
• Flutter Tutorial
• Kotlin Android

Web & Server

• Selenium Java
• R Tutorials
• R Script File
• R Working Directory
• R Data Types
• R Variables

R Operators

• R if statement
• R if-else statement
• ADVERTISEMENT
• R if-else-if statement
• R switch statement
• R repeat loop
• R while loop
• R break statement
• R Functions
• R – Concatenate strings
• R – String length
• R – Substring
• R – Convert string to uppercase
• R – Convert string to lowercase
• Create Vectors
• R – Create Vector
• R – Logical Vectors
• R – Integer Vectors
• R – Double Vectors
• R – Character Vectors
• Access Vectors
• R – Vector length
• R – Access items in Vector
• R – Iterate over items of Vector
• R – Delete items at specific indices from Vector
• R – Sort Vector
• Vector Operations
• R – Vector Arithmetic Operations
• R – Get Type of Vector
• R – Reverse Vector
• R – Vector Recycling
• Vector Checks
• R – Check if specific item is present in Vector
• R – Check if type of Vector is Logical
• R – Check if type of Vector is Integer
• R – Check if type of Vector is Double
• R – Check if type of Vector is Character
• Conversions
• R – Convert Logical Vector into Integer Vector
• R – Convert Character Vector into Integer Vector
• List Basics
• R – Create empty List
• R – Create empty List of specific length
• R – Create List
• R – Name elements of List
• R – Access elements of List
• R – List length
• R – Append item to List
• R – Loop through items in List
• List Transformations
• R – Reverse List
• List Checks
• R – Check if List is empty
• R – Check if specific item is present in List
• One or More Lists
• R – Join Lists
• List Conversions
• R – Convert List to Vector
• R – Convert List to Data Frame
• R – Create Matrix
• R – Check if R object is a Matrix
• R – Get element at given row, column of Matrix
• R – Get specific row of Matrix
• R – Get specific column of Matrix
• R – Get multiple rows of Matrix
• R – Get multiple columns of Matrix
• R – Matrix multiplication
• R – Transpose Matrix
• R – Inverse Matrix
• R – Correlation Matrix
• Create Data Frame
• R – Create empty Data Frame
• R – Create Data Frame
• Read Elements / Rows / Columns
• R – Access element at (i,j) in Data Frame
• Rows / Columns
• R – Get number of rows in Data Frame
• R – Get number of columns in Data Frame
• R – Add row to Data Frame
• R – Add column to Data Frame
• R – Remove row(s) in Data Frame
• R – Delete duplicate rows in Data Frame
• R – Remove NA Rows in Data Frame
• R – Delete column(s) in Data Frame
• R – Reset row numbers of Data Frame
• R – Replace NA with 0 in Data Frame
• R – Rename column(s) of Data Frame
• R – Sort Data Frame by column
• R – Filter Data Frame with NA rows
• R – Convert Data Frame to Matrix
• R – Convert Matrix to Data Frame
• Transformations
• R – Apply function for each row in Data Frame
• Two or More Data Frames
• R – Combine Data Frames
• R – Compare Data Frames
• Import / Export
• R – Import Excel to Data Frame
• R – Structure of Data Frame
• R – Summary of Data Frame
• R Date and Time
• ❯ R Tutorial
• ❯ R Operators

R Operators – Arithmetic, Relational, Logical, Assignment

R Tutorial – We shall learn about R Operators – Arithmetic, Relational, Logical, Assignment and some of the Miscellaneous Operators that R programming language provides.

There are four main categories of Operators in R programming language. They are shown in the following picture :

We shall learn about these operators in detail with Example R programs.

R Arithmetic Operators

Arithmetic Operators are used to accomplish arithmetic operations. They can be operated on the basic data types Numericals, Integers, Complex Numbers. Vectors with these basic data types can also participate in arithmetic operations, during which the operation is performed on one to one element basis.

An example for each of the arithmetic operator on Numerical values is provided below.

r_op_arithmetic.R

An example for each of the arithmetic operator on Vectors is provided below.

r_op_arithmetic_vector.R

R Relational Operators

Relational Operators are those that find out relation between the two operands provided to them. Following are the six relational operations R programming language supports.The output is boolean (TRUE or FALSE) for all of the Relational Operators in R programming language.

An example for each of the relational operator on Numberical values is provided below.

r_op_relational.R

An example for each of the relational operator on Vectors is provided below.

r_op_relational_vector.R

R Logical Operators

Logical Operators in R programming language work only for the basic data types logical, numeric and complex and vectors of these basic data types.

An example for each of the logical operators on Numerical values is provided below.

r_op_logical.R 

An example for each of the logical operators on Vectors is provided below.

r_op_logical_vector.R

R Assignment Operators

Assignment Operators are those that help in assigning a value to the variable.

An example for each of the assignment operators is provided below.

r_op_assignment.R

R Miscellaneous Operators

These operators does not fall into any of the categories mentioned above, but are significantly important during R programming for manipulating data.

An example for each of the Miscellaneous operators is provided below.

r_op_misc.R

In this  R Tutorial , we have learnt about R Operators – R Arithmetic Operators, R Relational Operators, R Logical Operators, R Assignment Operators, R Miscellaneous Operators with example R commands and R script files.

Popular Courses by TutorialKart

App developement, web development, online tools.

Popular Tutorials

Popular examples, learn python interactively, r introduction.

• R Getting Started
• R Variables and Constants
• R Data Types
• R Print Output

R Flow Control

• R Boolean Expression
• R if...else
• R ifelse() Function
• R while Loop
• R break and next
• R repeat Loop

R Data Structure

• R Data Frame

R Data Visualization

• R Histogram
• R Pie Chart
• R Strip Chart
• R Plot Function
• R Save Plot
• Colors in R

R Data Manipulation

• R Read and Write CSV
• R Read and Write xlsx
• R min() and max()
• R mean, median and mode
• R Percentile

R Additional Topics

• R Objects and Classes

R Tutorials

• Go Booleans (Relational and Logical Operators)

R Booleans (Comparison and Logical Operators)

• Go Operators

R Operator Precedence and Associativity

R Infix Operator

R Operators

R has many operators to carry out different mathematical and logical operations.

Operators in R can mainly be classified into the following categories.

R Arithmetic Operators

These operators are used to carry out mathematical operations like addition and multiplication. Here is a list of arithmetic operators available in R.

An example run

R Relational Operators

Relational operators are used to compare between values. Here is a list of relational operators available in R.

Operation on Vectors

The above mentioned operators work on vectors . The variables used above were in fact single element vectors.

We can use the function c() (as in concatenate) to make vectors in R.

All operations are carried out in element-wise fashion. Here is an example.

When there is a mismatch in length (number of elements) of operand vectors, the elements in shorter one is recycled in a cyclic manner to match the length of the longer one.

R will issue a warning if the length of the longer vector is not an integral multiple of the shorter vector.

R Logical Operators

Logical operators are used to carry out Boolean operations like AND , OR etc.

Operators & and | perform element-wise operation producing result having length of the longer operand.

But && and || examines only the first element of the operands resulting into a single length logical vector.

Zero is considered FALSE and non-zero numbers are taken as TRUE . An example run.

R Assignment Operators

These operators are used to assign values to variables.

The operators <- and = can be used, almost interchangeably, to assign to variable in the same environment.

The <<- operator is used for assigning to variables in the parent environments (more like global assignments). The rightward assignments, although available are rarely used.

Sorry about that.

Related Tutorials

Programming

R news and tutorials contributed by hundreds of R bloggers

Assignment operators in r: ‘=’ vs. ‘<-’.

Posted on November 16, 2010 by csgillespie in R bloggers , Uncategorized | 0 Comments

[social4i size="small" align="align-left"] --> [This article was first published on Why? » R , and kindly contributed to R-bloggers ]. (You can report issue about the content on this page here ) Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.

In R, you can use  both ‘=’ and ‘<-’ as assignment operators. So what’s the difference between them and which one should you use?

What’s the difference?

The main difference between the two assignment operators is scope. It’s easiest to see the difference with an example: ##Delete x (if it exists) > rm(x) > mean(x=1:10) #[1] 5.5 > x #Error: object 'x' not found Here x is declared within the function’s scope of the function, so it doesn’t exist in the user workspace. Now, let’s run the same piece of code with using the > mean(x <- 1:10)# [1] 5.5 > x # [1] 1 2 3 4 5 6 7 8 9 10 This time the x variable is declared within the user workspace.

Which one should I use

Well there’s quite a strong following for the “<-” operator:

• The Google R style guide prohibits the use of “=” for assignment.
• Hadley Wickham’s style guide recommends “<-”
• If you want your code to be compatible with S-plus you should use “<-”
• I believe that the General R community recommend using “<-”, but I can’t find anything on the mailing list.

However, I tend always use the “=” operator for the following reasons:

• The other languages I program in (python, C and occasionally JavaScript) use the “=” operator.
• It’s quicker to type “=” and “<-”.
• Typically, when I type declare a variable – I only want it to exist in the current workspace.
• Since I have the pleasure of teaching undergraduates their first course in programming, using “=” avoids misleading expressions like if (x[1]<-2)

Also Introducing Monte Carlo Methods with R , by Robert and Casella recommends using “=”.

If I’m missing something or you disagree, please leave a comment – I would be very interested.

• Stackoverflow question
• The R manual’s description of assignment operators

To leave a comment for the author, please follow the link and comment on their blog: Why? » R . R-bloggers.com offers daily e-mail updates about R news and tutorials about learning R and many other topics. Click here if you're looking to post or find an R/data-science job . Want to share your content on R-bloggers? click here if you have a blog, or here if you don't.

• assignment-operators

Copyright © 2022 | MH Corporate basic by MH Themes

Never miss an update! Subscribe to R-bloggers to receive e-mails with the latest R posts. (You will not see this message again.)

Multiple assignment operators

Description.

Assign values to name(s).

%<-% and %->% invisibly return value .

These operators are used primarily for their assignment side-effect. %<-% and %->% assign into the environment in which they are evaluated.

Name Structure

At its simplest, the name structure may be a single variable name, in which case %<-% and %->% perform regular assignment, x %<-% list(1, 2, 3) or list(1, 2, 3) %->% x .

To specify multiple variable names use a call to c() , for example c(x, y, z) %<-% c(1, 2, 3) .

When value is neither an atomic vector nor a list, %<-% and %->% will try to destructure value into a list before assigning variables, see destructure() .

object parts

Like assigning a variable, one may also assign part of an object, c(x, x[[1]]) %<-% list(list(), 1) .

nested names

One can also nest calls to c() when needed, c(x, c(y, z)) . This nested structure is used to unpack nested values, c(x, c(y, z)) %<-% list(1, list(2, 3)) .

collector variables

To gather extra values from the beginning, middle, or end of value use a collector variable. Collector variables are indicated with a ... prefix, c(...start, z) %<-% list(1, 2, 3, 4) .

skipping values

Use . in place of a variable name to skip a value without raising an error or assigning the value, c(x, ., z) %<-% list(1, 2, 3) .

Use ... to skip multiple values without raising an error or assigning the values, c(w, ..., z) %<-% list(1, NA, NA, 4) .

default values

Use = to specify a default value for a variable, c(x, y = NULL) %<-% tail(1, 2) .

When assigning part of an object a default value may not be specified because of the syntax enforced by R . The following would raise an "unexpected '=' ..." error, c(x, x[[1]] = 1) %<-% list(list()) .

For more on unpacking custom objects please refer to destructure() .

• Python Basics
• Interview Questions
• Python Quiz
• Popular Packages
• Python Projects
• Practice Python
• AI With Python
• Learn Python3
• Python Automation
• Python Web Dev
• DSA with Python
• Python OOPs
• Dictionaries

Python Operators

Precedence and associativity of operators in python.

• Python Arithmetic Operators
• Difference between / vs. // operator in Python
• Python - Star or Asterisk operator ( * )
• What does the Double Star operator mean in Python?
• Division Operators in Python
• Modulo operator (%) in Python
• Python Logical Operators
• Python OR Operator
• Difference between 'and' and '&' in Python
• not Operator in Python | Boolean Logic

Ternary Operator in Python

• Python Bitwise Operators

Python Assignment Operators

Assignment operators in python.

• Walrus Operator in Python 3.8
• Increment += and Decrement -= Assignment Operators in Python
• Merging and Updating Dictionary Operators in Python 3.9
• New '=' Operator in Python3.8 f-string

Python Relational Operators

• Comparison Operators in Python
• Python NOT EQUAL operator
• Difference between == and is operator in Python
• Chaining comparison operators in Python
• Python Membership and Identity Operators
• Difference between != and is not operator in Python

In Python programming, Operators in general are used to perform operations on values and variables. These are standard symbols used for logical and arithmetic operations. In this article, we will look into different types of Python operators. 

• OPERATORS: These are the special symbols. Eg- + , * , /, etc.
• OPERAND: It is the value on which the operator is applied.

Types of Operators in Python

• Arithmetic Operators
• Comparison Operators
• Logical Operators
• Bitwise Operators
• Assignment Operators
• Identity Operators and Membership Operators

Arithmetic Operators in Python

Python Arithmetic operators are used to perform basic mathematical operations like addition, subtraction, multiplication , and division .

In Python 3.x the result of division is a floating-point while in Python 2.x division of 2 integers was an integer. To obtain an integer result in Python 3.x floored (// integer) is used.

Example of Arithmetic Operators in Python

Division operators.

In Python programming language Division Operators allow you to divide two numbers and return a quotient, i.e., the first number or number at the left is divided by the second number or number at the right and returns the quotient. 

There are two types of division operators: 

Float division

• Floor division

The quotient returned by this operator is always a float number, no matter if two numbers are integers. For example:

Example: The code performs division operations and prints the results. It demonstrates that both integer and floating-point divisions return accurate results. For example, ’10/2′ results in ‘5.0’ , and ‘-10/2’ results in ‘-5.0’ .

Integer division( Floor division)

The quotient returned by this operator is dependent on the argument being passed. If any of the numbers is float, it returns output in float. It is also known as Floor division because, if any number is negative, then the output will be floored. For example:

Example: The code demonstrates integer (floor) division operations using the // in Python operators . It provides results as follows: ’10//3′ equals ‘3’ , ‘-5//2’ equals ‘-3’ , ‘ 5.0//2′ equals ‘2.0’ , and ‘-5.0//2’ equals ‘-3.0’ . Integer division returns the largest integer less than or equal to the division result.

Precedence of Arithmetic Operators in Python

The precedence of Arithmetic Operators in Python is as follows:

• P – Parentheses
• E – Exponentiation
• M – Multiplication (Multiplication and division have the same precedence)
• D – Division
• A – Addition (Addition and subtraction have the same precedence)
• S – Subtraction

The modulus of Python operators helps us extract the last digit/s of a number. For example:

• x % 10 -> yields the last digit
• x % 100 -> yield last two digits

Arithmetic Operators With Addition, Subtraction, Multiplication, Modulo and Power

Here is an example showing how different Arithmetic Operators in Python work:

Example: The code performs basic arithmetic operations with the values of ‘a’ and ‘b’ . It adds (‘+’) , subtracts (‘-‘) , multiplies (‘*’) , computes the remainder (‘%’) , and raises a to the power of ‘b (**)’ . The results of these operations are printed.

Note: Refer to Differences between / and // for some interesting facts about these two Python operators.

Comparison of Python Operators

In Python Comparison of Relational operators compares the values. It either returns True or False according to the condition.

= is an assignment operator and == comparison operator.

Precedence of Comparison Operators in Python

In Python, the comparison operators have lower precedence than the arithmetic operators. All the operators within comparison operators have the same precedence order.

Example of Comparison Operators in Python

Let’s see an example of Comparison Operators in Python.

Example: The code compares the values of ‘a’ and ‘b’ using various comparison Python operators and prints the results. It checks if ‘a’ is greater than, less than, equal to, not equal to, greater than, or equal to, and less than or equal to ‘b’ .

Logical Operators in Python

Python Logical operators perform Logical AND , Logical OR , and Logical NOT operations. It is used to combine conditional statements.

Precedence of Logical Operators in Python

The precedence of Logical Operators in Python is as follows:

• Logical not
• logical and

Example of Logical Operators in Python

The following code shows how to implement Logical Operators in Python:

Example: The code performs logical operations with Boolean values. It checks if both ‘a’ and ‘b’ are true ( ‘and’ ), if at least one of them is true ( ‘or’ ), and negates the value of ‘a’ using ‘not’ . The results are printed accordingly.

Bitwise Operators in Python

Python Bitwise operators act on bits and perform bit-by-bit operations. These are used to operate on binary numbers.

Precedence of Bitwise Operators in Python

The precedence of Bitwise Operators in Python is as follows:

• Bitwise NOT
• Bitwise Shift
• Bitwise AND
• Bitwise XOR

Here is an example showing how Bitwise Operators in Python work:

Example: The code demonstrates various bitwise operations with the values of ‘a’ and ‘b’ . It performs bitwise AND (&) , OR (|) , NOT (~) , XOR (^) , right shift (>>) , and left shift (<<) operations and prints the results. These operations manipulate the binary representations of the numbers.

Python Assignment operators are used to assign values to the variables.

Let’s see an example of Assignment Operators in Python.

Example: The code starts with ‘a’ and ‘b’ both having the value 10. It then performs a series of operations: addition, subtraction, multiplication, and a left shift operation on ‘b’ . The results of each operation are printed, showing the impact of these operations on the value of ‘b’ .

Identity Operators in Python

In Python, is and is not are the identity operators both are used to check if two values are located on the same part of the memory. Two variables that are equal do not imply that they are identical. 

Example Identity Operators in Python

Let’s see an example of Identity Operators in Python.

Example: The code uses identity operators to compare variables in Python. It checks if ‘a’ is not the same object as ‘b’ (which is true because they have different values) and if ‘a’ is the same object as ‘c’ (which is true because ‘c’ was assigned the value of ‘a’ ).

Membership Operators in Python

In Python, in and not in are the membership operators that are used to test whether a value or variable is in a sequence.

Examples of Membership Operators in Python

The following code shows how to implement Membership Operators in Python:

Example: The code checks for the presence of values ‘x’ and ‘y’ in the list. It prints whether or not each value is present in the list. ‘x’ is not in the list, and ‘y’ is present, as indicated by the printed messages. The code uses the ‘in’ and ‘not in’ Python operators to perform these checks.

in Python, Ternary operators also known as conditional expressions are operators that evaluate something based on a condition being true or false. It was added to Python in version 2.5. 

It simply allows testing a condition in a single line replacing the multiline if-else making the code compact.

Syntax :   [on_true] if [expression] else [on_false] 

Examples of Ternary Operator in Python

The code assigns values to variables ‘a’ and ‘b’ (10 and 20, respectively). It then uses a conditional assignment to determine the smaller of the two values and assigns it to the variable ‘min’ . Finally, it prints the value of ‘min’ , which is 10 in this case.

In Python, Operator precedence and associativity determine the priorities of the operator.

Operator Precedence in Python

This is used in an expression with more than one operator with different precedence to determine which operation to perform first.

Let’s see an example of how Operator Precedence in Python works:

Example: The code first calculates and prints the value of the expression 10 + 20 * 30 , which is 610. Then, it checks a condition based on the values of the ‘name’ and ‘age’ variables. Since the name is “ Alex” and the condition is satisfied using the or operator, it prints “Hello! Welcome.”

Operator Associativity in Python

If an expression contains two or more operators with the same precedence then Operator Associativity is used to determine. It can either be Left to Right or from Right to Left.

The following code shows how Operator Associativity in Python works:

Example: The code showcases various mathematical operations. It calculates and prints the results of division and multiplication, addition and subtraction, subtraction within parentheses, and exponentiation. The code illustrates different mathematical calculations and their outcomes.

To try your knowledge of Python Operators, you can take out the quiz on Operators in Python . 

Python Operator Exercise Questions

Below are two Exercise Questions on Python Operators. We have covered arithmetic operators and comparison operators in these exercise questions. For more exercises on Python Operators visit the page mentioned below.

Q1. Code to implement basic arithmetic operations on integers

Q2. Code to implement Comparison operations on integers

Explore more Exercises: Practice Exercise on Operators in Python

Please Login to comment...

Similar reads.

• python-basics
• Python-Operators

Improve your Coding Skills with Practice

What kind of Experience do you want to share?