how to record your voice in powerpoint presentation

How-To Geek

How to record voiceover narration in powerpoint.

If you're not able to physically present your slideshow, record a voiceover narration to make sure no points are missed.

Quick Links

Preparation, record a voiceover for your presentation.

If you’re sending out your presentation instead of giving it in front of an audience, but you feel adding a vocal explanation would better help to deliver the message, record a voiceover narration. Here’s how to do it.

Before you begin your PowerPoint narration, you’ll need to make sure you’ve made the proper preparations.

Set Up Your Mic

First, you’ll need a microphone. Most modern computers have a built-in microphone that gets the job done, but investing in a USB microphone will increase the audio quality of the narration by quite a bit.

The built-in microphone will be set as your input device by default, so if you plan on using it for the PowerPoint narration, you don’t need to take any additional steps in setting it up. However, if you plan to use a USB microphone for the narration, be sure to set it as the input device.

To do this on Windows, right-click the volume icon found on the right of the taskbar. In the menu that appears, select “Open Sound Settings.”

The “Sound Settings” window will appear. Here, scroll down to the “Input” section and click the box under “Choose your input device.”

If you’re using a USB microphone, it will appear here. Select it to set it as the input device.

The steps for Mac users are extremely similar. The only difference is you should go to "System Settings" and select "Sound" instead of right-clicking the volume icon like on Windows. From there, the steps are the same.

Take Notes and Rehearse

With your mic set up, you’re ready to start recording, right? Well, not quite. While you may not be physically standing in front of the audience delivering this presentation, you still need to treat it as though you are. This means going through the basics---taking notes and rehearsing your delivery.

One thing you can do to help you record a successful narration is to write out a script. As with a live presentation, though, you don’t want to sound like you’re reading straight from your notecards. Practice reading through the script a few times so that it sounds natural and fluid.

Once you’re confident in your delivery, it’s time to start recording.

Open the PowerPoint presentation in which you would like to record a voiceover narration. Head over to the “Slide Show” tab and, in the “Set Up” group, select “Record Slide Show.” Once selected, a drop-down menu will appear. Here, you can choose to start the narration from the beginning or from the current slide. If you choose to start recording from the current slide, make sure that you’re on the slide you’d like to start recording from.

Related: How to Record Your Screen with Microsoft PowerPoint

In this example, we’ll choose “Record from Beginning.”

Now, you’ll be in full-screen mode. You’ll notice a few extra tools appear, including a record button at the top-left corner of the screen. When you’re ready to start recording, click this button.

When you select the record button, a countdown timer will appear, giving you a three-second delay between clicking the button and starting your recording.

You can now start recording your voiceover narration! Continue through the presentation by clicking the right arrow to go to the next slide.

You can pause the recording at any time by pressing the pause button in the top-left corner of the window. The recording will automatically end when you make it to the last slide. Alternatively, you can press the stop button, also located at the top-left corner of the screen.

If you want to play your narration back, you can select the replay button.

A speaker icon will appear at the bottom-right corner of each slide that has a recorded narration. You can also play your narration back on each slide by hovering over the icon and pressing the play button.

If you’re not satisfied with the narration, simply repeat these steps to re-record.

Blog > Record voice narration for PowerPoint

Record voice narration for PowerPoint

01.11.21   •  #presentation #powerpoint #voiceover #narration.

In this blog post, you'll learn how you can add a narration for your PowerPoint presentation. Adding audio or video narration can be very helpful, especially in a time where many seminars and meetings have to be conducted online. If you would rather give your presentation using a live stream (which has many benefits), scroll down to the bottom and learn how you can do that!

Here's what you need for recording:

• a microphone (your computer's microphone should do)
• a finished set of PowerPoint slides
• a video camera (only if you want to record video as well)

• Open your PowerPoint presentation or create a new one.
• In the taskbar, select Slide Show . Then click Record Slide Show .
• Choose the option Record from Beginning .

• You'll now get to a different view, which we'll call "Recorder View". Here's an overview:

• In the bottom right corner, you'll see three icons. The one on the left is for switching the microphone on/off. Make sure this function is turned on. The icon in the middle is for turning on/off your camera. You can choose if you want to switch the video recording on or not. The last icon is only available if you've chosen the video recording function. If the function is enabled, you'll be able to see a video preview.
• In the top right corner under "Settings", you can choose what microphone (and camera) you'd like to use. This is only relevant if you have an external recording device that you would like to use. If you're recording with your computer, you don't have to set anything here.
• Now it's time to record. Click the big red Record button on the top left and start speaking.
• Tip: You can either record all the slides at once without pressing pause, or you record each slide individually, then click pause, then go on to the next slide and record again. However, it's important to note that PowerPoint creates an individual audio file for each slide, even if you record all at once.
• Important : PowerPoint does not record during transitions, so only speak when you're on a slide.

• You can also draw on your slides with the painting tools on the bottom. These drawings will be saved to your presentations.
• On the bottom left corner, you'll see what slide you're on. You can also see two time counts. The first one is for the recording on the current slide, the second one is for the recording of the presentation overall.
• If you want to delete the whole voiceover, click Clear and Clear Recordings on all Slides . If you only want to delete the recording on the specific slide you are on, click Clear Recording on current Slide.
• If you want to re-record the audio from one slide after deleting it, just go to that slide and click Record again. Record what you want to say, then click Stop when you're done.
• Once you're done, leave the Recorder View. Click the small x in the top right corner or hit Esc .
• You can now either save the presentation as a regular PowerPoint file (just click Save and you're done) or as a video. If you'd like a video, follow the instructions below:

Save Presentation as Video

• Go to File in the PowerPoint taskbar

• Choose Export on the left, then Create a Video .

• Select the quality you'd like. We recommend Full HD (1080p).
• In the following drop-down menu, make sure Use Recorded Timings and Narrations is selected.

• The setting Seconds spent on each slide is only for the slides where there is no recording (if you have recordings on all of your slides, you can just ignore this setting.)
• Click Create Video and choose where the video should be saved. The video creation might take a while, so don't close PowerPoint right away!

Live interaction with polls & quizzes

If you prefer to give a talk where you can also interact with your audience, then the free software SlideLizard is the ideal solution! Using live polls , Q&A and feedback , your presentations will become even more exciting and interactive. SlideLizard integrates directly with PowerPoint, making it a breeze to use.

Can I record a presentation in PowerPoint?

Yes, PowerPoint also allows you to record your presentation with voice and video narration. You can read about how this works in our blog .

How can I record a presentation in PowerPoint with audio and video?

At first create your presentation. For the recording you will need a microphone (the one on your computer should do), your finished presentation and a video camera (if you also want to record a video). We have created a tutorial on our blog where you can read the further steps.

Related articles

About the author.

Pia Lehner-Mittermaier

Pia works in Marketing as a graphic designer and writer at SlideLizard. She uses her vivid imagination and creativity to produce good content.

Get 1 Month for free!

Do you want to make your presentations more interactive.

With SlideLizard you can engage your audience with live polls, questions and feedback . Directly within your PowerPoint Presentation. Learn more

Top blog articles More posts

How to change languages in PowerPoint

Create and insert GIFs in PowerPoint

Get started with Live Polls, Q&A and slides

for your PowerPoint Presentations

The big SlideLizard presentation glossary

A podcast is an audio or video contribution that can be listened to or viewed via the Internet. Podcasts can be used for information on specific topics but also for entertainment.

Online Communication

Online communication is communication over the internet. Online communication is often anonymous and over social media platforms you can communicate with people around the world.

An e-lecture is a lecture that is held online. Many schools and universities offer e-lectures as technical opportunities improve.

Impromptu Speech

A speech that is given without any preparation, notes, or cards, is called an impromptu speech. It is often delivered at private events (e.g., weddings or birthdays) or for training presentation skills.

Be the first to know!

The latest SlideLizard news, articles, and resources, sent straight to your inbox.

- or follow us on -

We use cookies to personalize content and analyze traffic to our website. You can choose to accept only cookies that are necessary for the website to function or to also allow tracking cookies. For more information, please see our privacy policy .

Cookie Settings

Necessary cookies are required for the proper functioning of the website. These cookies ensure basic functionalities and security features of the website.

Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information about the number of visitors, etc.

• 9 Free Online Earth Day Games for Kids
• The Best Gadgets for The Beach or Pool

How to Do a Voiceover on PowerPoint

Narrate your presentations with ease

• Central Washington University

What to Know

• Single slide: Select a slide. Go to Insert > Audio > Record Audio . Type a name, select Record , then read your script. Select Stop .
• Entire slideshow: Select View > Normal and choose the first slide. Select Slide Show > Record Slide Show > Record from Current Slide .
• To review the recording, click the sound indicator (it looks like a speaker) and then select Play to hear your recording.

This article explains how to record a voiceover on PowerPoint for a single slide or for the entire slideshow. The instructions apply to PowerPoint for Microsoft 365 , PowerPoint 2019, PowerPoint 2016, and PowerPoint 2013.

How to Record a Voiceover for a Single Slide

Before narrating your PowerPoint presentation, be prepared:

• You’ll need a microphone attached to, or built into, your computer. Test the microphone to make sure it is working. Set the sound level so your audio is easy to hear.
• Prepare yourself for the narration. Write a script you can follow while recording the voiceover. Practice the presentation a couple of times so your voiceover will sound smooth.
• Decide whether to record the voiceover one slide at a time or record a voiceover for the entire presentation in one go.

The simplest way to record audio for a voiceover is to record one slide at a time. To get started, select the slide where you want to add the narration, then go to Insert > Audio > Record Audio .

Here’s how to record a voiceover on the slide:

Type a Name for the voiceover narration.

Select Record (the button with a red dot).

Read your script or ad-lib the narration.

Select Stop when you’re finished recording.

The Record Sound dialog box disappears, and a speaker indicating sound appears in the center of the slide.

To review the recording, click that sound indicator and then select Play to hear your recording.

When you're finished, click anywhere outside the playback controls to accept the recording.

You’ll see an audio icon in the middle of the slide. Move this icon anywhere on the slide to get it out of the way of other elements on the slide.

How to Record a Voiceover for an Entire Presentation

The voiceover for the entire presentation can be recorded at one time. In addition to recording a voiceover, you can record a video of yourself giving your presentation.

To set up your presentation when you want to narrate an entire slideshow:

Select View > Normal

Select the first slide in the presentation where you want to record audio.

Select Slide Show > Record Slide Show > Record from Current Slide .

In PowerPoint 2019, the Recording window opens.

In PowerPoint 2016 and earlier versions, a Record Slide Show dialog box prompts you for further options. In the Record Slide Show box, select options to set up the slideshow:

• Slide and animation timings: When recording, PowerPoint automatically tracks the timing of slide changes and any animations that occur.
• Narrations, ink, and laser pointer: When recording, PowerPoint automatically tracks when narrations, any inking, or laser pointing occurs.

Leave both checked to make automating your slideshow easier.

Select Record .

In PowerPoint 2016, select Start Recording .

Select Pause to temporarily stop the recording if you need a break.

If you made a mistake and want to start over, select Clear > Clear Recordings.

In PowerPoint 2016 select Clear > Clear Recordings on Current Slide .

When you’ve finished recording a slide, select the Advance button to advance to the next slide or press the spacebar on your keyboard.

When you’re done recording your narration on the slide, select Stop and close the recording window to return to the presentation.

You may have noticed some controls at the bottom left side of the screen. These are a few controls to aid you in your presentation.

These handy handy tools include the Laser Pointer , Highlighter , and Eraser . As you advance through your presentation, mark or highlight parts of your slides as you narrate. PowerPoint records the timing of these marks (if you left the boxes checked) to go along with your narration. Likewise, using the laser pointer shows a simulated red laser dot so that you can point out different things on your slides as you narrate your presentation.

How to Listen to the Recorded Voiceover

Once you’ve recorded your narration, you can go back to the slides and listen to your voiceover.

Here’s how to play a narration:

Select the slide containing the voiceover you want to hear.

Look for the recording icon on the slide. It should appear as either a small video screenshot or a speaker icon on the slide.

Hover over select this icon and then click Play to preview the recording.

How to Turn a Voiceover Off

If you don’t want to hear your narrations when playing a slideshow, but want to keep the narrations with the slide, turn voiceover off.

To turn voiceover off, select Slide Show and click to deselect the Play Narrations checkbox.

How to Delete a Voiceover

There are a couple of ways to delete voiceover audio in your presentation. To delete the audio on a single slide, find and select the recording on that slide, then press the Delete key.

To delete the voiceover from all the slides in a presentation: Select Slide Show and then select the down arrow to open the Record Slide Show menu. Then, select Clear Narration on All Slides .

Embedding Versus Linking Audio Files in PowerPoint

When you use the PowerPoint tools to record a voiceover narration, the audio file is embedded in PowerPoint. This means the audio is part of the PowerPoint file and not stored in a separate file, making it easy to play your presentation on any device.

If you have audio you recorded using other software and it's stored on your computer, you can link to the audio file. Linked files keep your presentation size smaller, but links can be broken if the audio file isn't available to the PowerPoint presentation. To prevent broken links, store the presentation file and the audio files in the same folder on your computer.

Get the Latest Tech News Delivered Every Day

• How to Add Audio to PowerPoint
• How to Make a Slideshow on PowerPoint
• Adding Sounds, Music or Narration to PowerPoint Slide Shows
• How to Get PowerPoint on a Mac
• Edit Music, Sound, or Other Audio Settings in PowerPoint
• How to Make and Add Your Own Sound on TikTok
• Loop a PowerPoint Slide Show
• How to Convert PowerPoint to Video
• How to Use Speaker Notes in PowerPoint
• Change Order of Animations for PowerPoint Slides
• How to Add Music to PowerPoint
• How to Change a Black-and-White Picture to Color in PowerPoint
• How to Add Page Numbers in PowerPoint
• Add, Delete or Change the Order of PowerPoint Slides
• Using Design Themes in PowerPoint
• Create Family Trees Using PowerPoint Organization Chart

How to Record a PowerPoint Presentation with Narration

Can be helpful in creating a dramatic narrative

Microsoft PowerPoint has a built-in recording tool that allows you to narrate your presentations using recorded audio. You can export and share recorded presentations as video files.

This tutorial covers everything about recording PowerPoint presentations on Windows and Mac computers.

Record PowerPoint Presentation with Narration

Open the PowerPoint file/presentation you want to record and follow the steps below.

Record PowerPoint Presentation on Windows

• Select the slide you want to start recording from on the slide thumbnail pane.

• Head to the Record tab on the ribbon and select the Record button to start recording from the current/selected slide.

To record from the first slide, select the down-facing arrow icon below the Record button and select From Beginning .

You can also record a presentation from the Slide Show tab. Select Slide Show on the ribbon and select Record , From Current Slide , or From Beginning .

That’ll open PowerPoint’s presentation recorder in a fullscreen window.

• Select the Record icon and start speaking after the three seconds countdown.

PowerPoint records the presentation window and captures your voice and webcam feed as you navigate the slides. Select the left-facing and right-facing arrows to move to the previous and next slides in the presentation.

Record PowerPoint Presentation in macOS

• Open the Slide Show tab and select Record Slide Show .

• Select the Record button on the toolbar to start recording your narration.

Use your keyboard arrow keys to move back and forth between slides. Press N or Space Bar to move to the next slide or animation in the presentation. Press P or Backspace to return to the previous slide or animation.

Select Tips in the top-left corner for more keyboard shortcuts and other presentation tips.

Note: The narration tool doesn’t record slide transitions. When moving between slides, wait for the destination slide to appear on the screen before speaking.

PowerPoint Recorder Control/Settings

You’ll find a handful of controls and options on the recording tool. We’ll show you how to use these controls to include voiceovers or audio recordings in your presentation.

Using Presentation Pointer Tools

PowerPoint provides several tools to mark up your slides when narrating your presentation. There’s a pen tool, eraser, laser pointer, and highlighter.

With the Pen tool, you can draw on slides during narration/recording. Press Ctrl + P (Windows) or Command + P (Mac) to use the pen tool. You can also select the Pen icon to convert the pointer to a pen.

The Laser pointer tool converts your cursor to an onscreen laser. Use the laser pointer to draw attention to something on a slide/presentation.

Press Ctrl + L (Windows) or Command + L (Mac) to use the laser pointer. There’s also a Laser pointer icon on the toolbar.

Pressing Ctrl + I (or selecting the Highlighter tool ) converts your cursor to a highlighter.

Use the Eraser tool to remove inks and highlight from slides. Select the Eraser icon or press Ctrl + E and select the ink to erase.

On macOS, select the Erase Pen icon (or press E ) to erase all drawings and highlights on the slide.

You can change the pointer tools ink from the color selection boxes. However, one major limitation is that you can’t change the size of these pointer tools.

Pause and Resume Your Recording

In Windows, press I on your keyboard or select the Pause button in the top-left corner to pause your recording.

Press I again or select the Record icon to resume the recording.

If you use a Mac, select the Pause icon in the top toolbar to pause the recording.

Unmute or Mute Microphone

Check that your microphone is unmuted before recording. Select the microphone icon in the bottom-right corner to mute or unmute your mic.

PowerPoint for Windows allows you to mute and unmute your microphone in real time while recording video/audio narrations. The macOS version of PowerPoint only lets you configure your camera and microphone settings before recording.

Switch Microphone or Camera

Want to record your presentation with an external microphone or camera? Press Ctrl + M or select the audio/camera settings icon in the top-right corner and choose your preferred microphone/camera.

In macOS, select the microphone icon to mute or unmute your microphone. Select the arrow-down icon next to the microphone or camcorder icons to switch input devices.

Enable and Disable Camera

The recorder displays your camera or webcam feed in the bottom-right corner of the presentation slides.

Select the camcorder icon to remove your webcam feed from the recording. Select the icon again to display your webcam feed in the presentation.

You can also use the Ctrl + K keyboard shortcut on Windows computers to enable or disable your camera.

On Mac computers, you’ll find the video control icon on the top toolbar.

Note: The recording tool greys out the camcorder icon if your microphone is turned off.

Enable or Disable Camera Preview

PowerPoint allows you to disable the camera preview without turning off your camera or webcam.

Press Ctrl + J (Windows) or select the Camera Preview icon in the bottom-right corner to disable or enable the camera preview.

End a Recording

Press S on your Windows keyboard or select the Stop icon to end the recording.

Replay or Preview Your Recording

When you end a narration, press V on your keyboard or select Replay to preview or watch the recording.

The recorded narration will include all pen inks, highlights, and laser pointer gestures made during the presentation.

You can also preview/replay the narration outside the recording tool. Open the Slide Show tab and choose to watch the playback From Beginning or From Current Slide .

PowerPoint allows you to preview the playback on individual slides. A speaker/audio icon appears in the bottom-right of PowerPoint slides with narrations.

Choose the slide you want to preview, hover your cursor on the speaker icon in the bottom-right corner, and select Play .

Delete Current Narration/Recording

Did you spot an error when previewing your presentation? Want to delete the current narration and start from scratch?

Select the Clear existing recordings icon and choose whether to Clear Recordings on Current Slide or Clear Recordings on All Slides .

On Mac, select the Bin icon to delete the entire narration/recording.

Close the Narration Tool

Select the X icon on the title bar to close the presentation narration tool and return to Powerpoint.

Select End Show in the top-left corner to close the recording tool on a Mac computer.

Delete Narrations from Slides

Want to delete the narration or timing on an individual slide or the entire presentation? Select the slide with the narration you want to delete and follow the steps below.

• Open the Record tab and select the down-facing arrow below the Record icon.
• Select Clear and choose to clear timing or narration on current or all slides.

Export Recorded or Narrated Presentation

You can export a narrated PowerPoint presentation as a video file. The video output includes ink strokes, recorded audio/video, laser pointer gestures, and webcam/camera recording.

• Open the Record tab and select Export to Video .

Alternatively, open the File menu, select Export on the sidebar, and select Create a Video .

• Choose the quality of the video export in the first drop-down box—Ultra HD (4K), Full HD (1080p), HD (720p), Standard (480p).

• Choose Use Recorded Timings and Narrations in the next drop-down box and select Create Video .

• Give the recorded presentation a file name and select Save .

Narrate Your PowerPoint Presentations

The Microsoft PowerPoint web app doesn’t have a recording tool. As a result, you can only record presentations with narrations using PowerPoint for Windows or Mac.

You might meet issues recording a slide show if you use an outdated version of PowerPoint. Also, the recording tool on older versions of PowerPoint has a different interface and lacks some controls. Update PowerPoint and restart your computer if you cannot record a slide show.

Sodiq has written thousands of tutorials, guides, and explainers over the past 4 years to help people solve problems with Android, iOS, Mac, and Windows devices. He also enjoys reviewing consumer tech products (smartphones, smart home devices, accessories, etc.) and binge-watching comedy series in his spare time. Read Sodiq's Full Bio

Read More Posts:

How to Narrate a PowerPoint Presentation (And Record Your Voice)

For a presentation that you aren’t actually giving in person, you can narrate it within PowerPoint, recording your voice so that others can play it back when they watch the presentation.

It’s a nifty trick that popular with slide shows and presentations on networks such as SlideShare, YouTube, and even individual websites. And it can even help you when rehearsing your presentation as well.

Here’s how to narrate a PowerPoint presentation by recording your voice, in a few quick steps!

2 Million+ PowerPoint Templates, Themes, Graphics + More

Download thousands of PowerPoint templates, and many other design elements, with a monthly Envato Elements membership. It starts at $16 per month, and gives you unlimited access to a growing library of over 2,000,000 presentation templates, fonts, photos, graphics, and more.

Ciri Template

Pitch Deck Templates

Startup pitch deck.

Mystify Presentation

Maximus Template

Modern PPT Templates

New & innovative.

Explore PowerPoint Templates

Create and Design Your Presentation

The first step to preparing a narrated or recorded PowerPoint presentation is to design the presentation and refine the content. During this step you may even want to think about how you will script the presentation so that you are designing with a flow in mind.

Make sure to include any specific transitions you want to use from slide to slide, and don’t forget to read our guide on how to design a professional presentation for tips and pointers.

Prepare for Recording

Before recording a narration, it is advised to write out a script and check your computer microphone to ensure that the sound is correct and that recordings will be at an appropriate volume. You can do this with a short test recording.

Now it is time to record the narration. You can record narration for all slides or select slides.

Open your presentation and navigate to the Slide Show tab.

If you are recording narration for all of the slides, you are ready. If you plan to record a voiceover for only some of the slides, you want to hide the slides you won’t have a recording for.

You can do this by selecting the slides you don’t want to include, right- or ctrl-click and then Hide Slide.

The other option is to create a custom show. From the menu select Custom Show > Custom Slide Show > use the + to add slides. You will need to know which slide numbers you want for this option because you can’t see previews.

Record the Narration

Now you are ready to record. (Good luck!)

In the Slide Show tab, click the Record Slide Show Button from the first slide in your presentation.

Recording starts automatically. (You’ll notice the screen shifts into full presentation mode.) As you record the narration, you can use the navigation tools on the screen to advance slides. This will override any previous timing settings so that slides advance in tandem with your voice narration.

When you are finished, click End and you will be prompted to save the recording. Only one recording can be saved at a time. A new recording will override any previously saved recorded narrations.

You can preview the recording using the start button.

Helpful Keyboard Shortcuts

Using keyboard shortcuts during recording can make it a little easier.

Some shortcuts you might use include:

• Click, spacebar or right arrow: Advance to the next slide
• Delete or left arrow: Go back one slide
• B: Toggle to black screen
• Esc: End slide show recording

Choose a Playback Option

Finally, you’ll want to determine how the presentation will be played back for users.

Click on Set Up Slide Show from the menu and make your selections from the options on the screen. Then you can save or export to a desired file format.

A PowerPoint presentation with a narrated recording can be a useful tool to help get your information in front of more people. All you need to do it is a quiet room to record and a microphone attached to your computer.

Don’t forget to take a look at our full PowerPoint templates guide , or our collection of the best PowerPoint templates for your next project!

How to Record Audio in PowerPoint for Narration or Voice-Over | Step-by-Step

I’ve scrolled through a lot of slideshows and, let’s face it, they’re not always the easiest to follow or understand what’s going on. I’m sure you have felt this too.

Have you ever thought, it would be great if the slides came with audio so that the presenter could explain and talk through each slide?

In this article, we’re going to show you how to record audio in PowerPoint as a narration or voice-over so your audience can feel as if you are presenting live and in person.

All you have to do is record yourself talking through each slide and PowerPoint will take care of the rest!

Related topic : If you are only looking to insert or add an audio that does not advance or move a slideshow in time and in synch your voice, this article: Adding Music to PowerPoint Slideshow explains how.

How to record audio as a voice-over or narration in PowerPoint – Quick Guide

• In PowerPoint, choose a slide.
• From Slide Show menu > click lower part Record Slide Show button
• Select a slide to Record from Current Slide, or Record from Beginning from the sub-menu
• NOTE: PowerPoint versions 2013-2016 only: A “Slide Show Settings” dialog box will appear for animation timings etc. You can leave both checked.
• PowerPoint will then open into full-screen Recording Mode
• NOTE: Microsoft Office PowerPoint versions 2013-2016 and Microsoft for Mac 365 will start recording immediately.
• In Recording Mode > click the Record button in the top left to start recording countdown.
• You are now ready to talk through your presentation and record your voice.
• To Stop or Pause recording > click Pause button or Stop / End Show (x) button.
• Jump to the full step-by-step tutorial below

Why use narrations or voice-overs in PowerPoint Presentation?

Adding a narration or voice-over into a presentation will enable your slideshow to be played and move forward in time or sync with your voice.

Recording audio for your slideshow is a widely used feature and has many benefits. For example:

• It’s useful in situations when a speaker is not available and when people want to view presentations on their own and at their leisure.
• It is also an effective way for speakers to rehearse and time specific slides or the entire presentations before they happen.
• And you may have watched many instructional videos or online courses with a recorded voice over, just because it makes the content easier to understand, is more engaging and lively than just written words alone.

After you finish the audio recording you can share or export your presentation by converting or exporting your PowerPoint (.ppt) file into a video (.mp4 or .mov file) which will have both your audio and visuals contained in one file.

Before recording your narration or voice-over – tips.

Make sure your microphone works..

An important step to take before recording your audio is to ensure your microphone is set up correctly and your voice can be played back clearly. The video below runs through how to set up an external mic for your Windows or Mac .

First, plug in your headset or microphone to your computer if you are not using the inbuilt mic. Or if you are using a Bluetooth headset, make sure it’s paired/connected properly.

To make sure everything is working OK, access the audio device settings on your computer as shown in the video above. While you are in the device settings menu, select your microphone and set it as default.

You can test the playback quality by using the free software tools on your machine:

• Windows 10 – Use Voice Recorder (previously called Sound Recorder)
• Mac – Use Voice Memos
• Chromebook – New in 2021 from OS 88. Use Screen Capture to test your audio recording by pressing the Ctrl, Shift, and Overview keys to bring up the capture bar. ( You may need to enable by entering chrome://flags  in the URL address bar and search for “capture” in the search bar or by entering chrome://flags/#screen-capture in the URL address bar.)

Note – In PowerPoint 2016, you cannot change which microphone device you want to record in screen recording mode (so do it first!), however in 2019/Office 365 it is possible to do so, by using the settings link in the full-screen recording mode.

How to Record Audio in PowerPoint Step-by-Step Instructions.

Versions Covered: PowerPoint 2013, 2016, 2019, 2020, Office 365, PowerPoint for PC / Windows, PowerPoint for macOS and Chromebook.

• Start by opening the PowerPoint presentation in which you want to record your audio.

• Stop Recording. To end the slideshow recording, click the Stop (square button) at the top left. Or keyboard shortcut – Press Alt+S. You’re done recording your captivating and engaging PowerPoint slideshow with a voice-over / narration!
• Exit full screen recording window. Click the (x) button int the corner. To save your slide timings, click “yes” if prompted. When you return to your slide view, a small icon of a microphone appears on the bottom right corner of each slide. Click this icon to hear your voice over for any particular slide.

Advanced PowerPoint Audio Recording Options.

Add annotations to your recorded powerpoint slide show..

Adding annotations to your PowerPoint presentation is an optional step and can help your presentation stand out. But, what are annotations, and how should you use them when recording your voice-over?

If you want to draw a user’s attention to a specific area or to add some interactivity; using annotations is the way to do it. It is basically a virtual marker you can use to highlight elements in your presentation slides e.g by circling a word or picture, underlining a phrase, writing additional notes on-screen, or pointing to specific items. 

To use the Annotation Tool in PowerPoint: Scroll to the bottom of the full screen recording view (as shown in the image below). Then, select any of the tools available (the laser pointer, highlighter or pen) and annotate your slide, by drawing with them using any mouse or other pointing device.

Note, this will not make a permanent change to your slides, it’s only visible in the recorded playback!

Using the Timings Function to Adjust Recording Speed.

As you record your narration, you will be able to see a clock in the bottom left corner showing how much time you spend on each slide, against the total amount of time recorded so far.

While this is very helpful for rehearsing your presentation, it’s quite common to have issues with timings with your recorded slideshow. For example when you have switched to the next slide too quickly.

To Change the Timings of Your Recording: Navigate to the Slide Show tab in the top ribbon > (Next to the Record Slide Show icon, we used before) > click the Rehearse Timings icon. The presentation will now once again go to full-screen mode, and you can use your arrow keys to change the slides and set new timings.

Clearing or Deleting your narration and / or timings

If you are not happy with your voice-over on a slide or wish to start the recording from the beginning, PowerPoint gives you some easy options to do so.

To Delete a Narration or Timings: Navigate to the Slide Show tab in the top ribbon OR the Recording Tab. Select the down arrow on the “ Record Slide Show ” button > from the menu choose “ Clear ” > Select the appropriate timings and/or narration option.

Save and Distribute the Presentation with Audio as a Movie / Video file.

Now that you are finished recording your PowerPoint presentation, your voice audio will be attached to the same file and it’s time to distribute it by exporting your PowerPoint (PPT file) into a video (.mp4 or .wmv) .

To Export your Presentation as a video: In PowerPoint navigate to File Menu > Export > Select your preferred options. (E.g.) File Format: MP4 . Quality Width 1,920 Height 1,080

Recording Audio Tips and Tricks

Macos 2019 – powerpoint audio recording tip.

To give PowerPoint access to record your screen in macOS you need to set up the right security and privacy permissions:

• Open System Preferences
• Select Security & Privacy
• Select Privacy tab.
• In the left panel scroll to Screen Recording > click “ +” icon .
• In the “Applications” window select PowerPoint

Microsoft 365, 2016, 2019 for Windows PC – Recording tab in PowerPoint

Microsoft 365 subscribers with the Click-to-Run version of Microsoft 365 for Windows PC can use the Recording tab .

The Recording tab shows the recorded video , screenshots, and screen recording options in a single menu for easy access. To turn on the Recording tab of the ribbon in PowerPoint 365 Windows PC

• Select the  File  menu > click  Options .
• In the PowerPoint Options  dialog box > click   Customize Ribbon
• In the right-panel > select the  Recording  check box.
• Click  OK .

If you click the button on the bottom of the “Record Slide Show” button, you can start from the beginning of the slideshow or from where you are.

Knowing the basics of recording audio in PowerPoint is a powerful tool for anyone who wants to make a downloadable slideshow, create an internet streamed webinar, upload a video for YouTube, Vimeo, or any other digital platform such as your website or other digital platforms.

You may also like: How to Turn a PowerPoint Into a Video

Related Posts

How to add music to powerpoint slideshow and find free music, [solved] how to upload powerpoint to google drive, 10s method: how to add bullet points in powerpoint.

How to Record in a PowerPoint presentation Audio & Video.

Recording audio and video in a PowerPoint presentation can improve the overall effectiveness and impact of your presentation because it can make it more interesting and keep your audience engaged.

Microsoft PowerPoint 2013 and later versions allow you to record your presentation with audio and video, so you can enhance your slides with voice narration or by recording yourself during the narration via the camera.

In this guide we show, how you can record your voice or yourself while presenting a Microsoft PowerPoint Presentation and how to insert an audio or video file to a Presentation. You will also learn how to save the presentation as a video file or as a PowerPoint Show after you have finished recording audio/video.

How to Record or Insert Audio or Video in a PowerPoint Presentation.

There are two ways to include audio and video in your PowerPoint presentation: record a slide show with audio from your microphone and video from your camera, or add external audio and video to your presentation from a file.

* Note: As mentioned above, to add sound and video to a PowerPoint presentation you should have Microsoft PowerPoint 2013, 2016, 2019 or PowerPoint for Office 365.

1. Record your Audio & Video to PowerPoint.

2. Insert External Audio or Video files to PowerPoint.

Method 1. Record your Sound and Video to a PowerPoint Presentation.

To record your voice narration and/or yourself while presenting the slides in a presentation:

Step 1. Configure Microphone & Camera Settings.

Before recording your audio/video to a PowerPoint presentation, make sure that your microphone and camera settings are properly configured.

To adjust your microphone and camera settings for optimal quality:

1. Press Windows + I keys to open Windows Settings.

2 . Go to System > Sound and under Input Settings select your microphone device and make sure the input volume is set to at least 80%

3. When done, go to Bluetooth & devices > Cameras > Connected Cameras and ensure that your camera is recognized by the system.

Step 2. Record Audio and Video to PowerPoint Slideshow.

Before you start recording audio/video in a presentation, it's important to know that audio cannot be recorded during animations and slide transitions. So, to avoid interruptions of your speech during the presentation, remember to leave a brief pause of 1-2 seconds in your narration at the beginning and end of each slide.

1. Open the PowerPoint presentation in which you want to record audio and video.

2. From the Slide Show tab (or the Recording tab), click the Record Slide Show button and choose either Record from Current slide or Record from Beginning, depending on which point you want to add audio/video.

3. The presentation will open in a recording window in full-screen mode.

4. Click the SETTINGS button at the top-right corner and ensure the correct microphone and camera devices are selected.

5. Use the Microsoft and Camera icons in the bottom right corner of the screen to turn off the input of the Microphone or Camera device if it is not needed during the presentation.

6. When you are ready, click the RECORD button to start recording your voice and/or camera input and present your slides.

7. Use the arrow keys to navigate through slides (forward only). Remember that you cannot go back or forward to a slide that already has a recording. This is to prevent accidentally recording over an existing recording.

8. If there are videos in your slides, click on them to start or stop the playback.

9. Use the Pen , Highlighter , or Laser icons from the bottom right corner to annotate your slides.

10. Look at the bottom left corner to find out the time counts for the current slide and the entire presentation.

11. If a slide already contains a recording, you will see a video preview or a speaker icon displayed at the bottom right corner.

• To re-record audio/video to a slide, click CLEAR and select Clear Recording on Current Slides .
• To delete all recordings, click CLEAR and select Clear Recordings on All Slides .

12. To pause or stop recording using the Pause and Stop buttons.

13. When finished Close the recording window (or right-click and select End Show ).

Step 3. Preview your Recordings on the Presentation.

After completing the recording, it is crucial to review the recordings of each slide before exporting the file as a PowerPoint show or video. To preview your recordings in your PowerPoint presentation:

1. Go to the Slide Show tab and click either From Beginning or From Current Slide to start playback.

2. Make sure each slide has a record and timing by changing the View to Slide Sorter .

3. On each slide where audio has been recorded you will see an audio icon along with the time/duration of the recording.

4. When you are satisfied with your recordings, you can move on to the next steps and export the entire presentation, including your audio and videos, either as a PowerPoint Show as a video file.

Step 4. Save the Presentation as a PowerPoint Show.

If you want to export your Presentation as a PowerPoint Show (.ppsx), which is useful if you want your presentation to be viewed even on computers that don't have the Microsoft PowerPoint app installed, do the following:

1. Click on File and select Save As .

2. Choose the location where you want to save the file and select PowerPoint Show (*.ppsx) format from the Save as type drop-down menu.

3. Then, click Save to save the file as a PowerPoint Show.

Step 5. Save Presentation to Video.

If you prefer to export your PowerPoint SlideShow as a video file, follow these steps:

1. Click on File and select Export .

2. Then Click the Create a Video option and select the preferred video quality from the first drop-down menu (e.g., Full HD 1080p ).

3. Then select the Use Recorded Timings and Narrations option in the next drop-down menu.

4. Then adjust the Seconds spent on each slide for the slides without recordings.

5. Finally, click the Create Video button and select the location to save the video.

6. Now wait for the PowerPoint to finish creating the video, as it may take some time depending on the performance of your computer.

7. Once the video is created, you can play it using any video player of your choice.

Method 2. Add External Audio and/or Video to a PowerPoint Presentation.

Instead of directly capturing audio and video within PowerPoint, you can insert an external audio or video file in your presentation.

Step 1. Adding an audio archive to a PowerPoint presentation.

To insert an audio file from your computer (such as pre-recorded narration, background music), to a slide:

1. Open your PowerPoint presentation and navigate to the specific slide where you want to add the audio.

2. Then, go to the Recording tab, click on the Audio button, and select the Audio on My PC option.

3. Then, choose the desired audio file from your device and click Insert .

4. The added audio file will appear as a small speaker icon in your presentation.

5. When you click on the speaker icon, the Playback tab will appear in the Ribbon. Move to the Playback tab and click the Play in Background option if you want the audio to play across all slides.

Step 2. Adding a Video file to a PowerPoint Presentation.

If you want to insert a video file from your PC, inside a Presentation.

1. Open the presentation and navigate to the specific slide where you want to add the audio.

2. Switch to the Recording tab and click on the Video button.

3. Then, select the video file that you want to add in the slide and click Insert .

4. Resize the video window as needed, and then customize the Playback settings from the Playback tab.

Step 3. Exporting or Saving the Presentation.

Once the audio and video files are inserted, you can export the presentation to a video file or save it as a PowerPoint show. To do that:

1. Select the Recording tab:

• Select Save as Show to save the file as a PowerPoint show, or…
• Export to Video to export the file as a video.

That's it! Let me know if this guide has helped you by leaving your comment about your experience. Please like and share this guide to help others.

We're hiring

We're looking for part-time or full-time technical writers to join our team! It's about a remote position that qualified tech writers from anywhere in the world can apply. Click here for more details.

• Recent Posts

• FIX: Error 0x8007025d in Windows 10 Update. - April 22, 2024
• How to Disable Device Encryption in Windows 11/10. - April 17, 2024
• How to View Permissions on Shared Folders on Windows 10/11. - April 15, 2024

Konstantinos Tsoukalas

Related posts.

How to , Tutotial , Windows , Windows 10

FIX: Error 0x8007025d in Windows 10 Update.

How to , Windows , Windows 10 , Windows 11

How to Disable Device Encryption in Windows 11/10.

How to , Tutotial , Windows , Windows 10 , Windows 11

How to View Permissions on Shared Folders on Windows 10/11.

Leave a reply cancel reply.

Your email address will not be published. Required fields are marked *

3 Simple Ways to Record Audio on PowerPoint Presentations

Sara Wanasek

Enhance your PowerPoint presentations by incorporating music and adding your own narration or unique sound bites. This not only keeps your audience engaged but also complements your written content. Learning how to add and record audio in PowerPoint is a valuable skill, enabling you to create compelling presentations for professional, educational, and personal purposes.

Recording audio in PowerPoint offers significant advantages, especially when delivering remote or asynchronous presentations. You can:

• Record yourself giving the presentation and share the recording for viewers to access at their convenience, or
• Include audio clips to emphasize transitions, key points, or significant moments within your presentation.

Continue reading to discover how to record audio live in PowerPoint on Windows devices, add pre-recorded audio, and find useful tips for editing!

Step-by-step guide: How to Record Audio on PowerPoint

In PowerPoint, you have the capability to record two types of audio:

• Recording for exporting as a video: This method is ideal for narrating your presentation, making it perfect for sharing with others to watch at their own pace.
• Recording short audio clips: This method allows you to incorporate audio into your live presentation.

Let’s walk you through both methods of recording audio directly within PowerPoint:

Option 1: Record Narration for All Slides

Step 1: Open Your PowerPoint Presentation

Launch PowerPoint and open a new or existing PowerPoint file. If your are starting from scratch, make sure to complete the slides with design and interactive elements (make sure your presentation is engaging !) before adding your audio. 

Step 2: Choose the Starting Position

• Go to the ‘SlideShow’ tab and click on the arrow next to ‘Record Slide Show.’
• Choose between ‘From Current Slide’ or ‘From Beginning’ based on your requirements.
• This will open the recorder window, where you can make necessary adjustments to the settings.

Step 3: Adjust Settings

You can select the microphone, view your notes, and toggle your camera on or off.

Step 4: Begin Recording

When you are ready, click the ‘Play’ button to begin recording. You will see a 3-second countdown, then the recording will start and you can begin speaking. 

Use the side arrows for smooth navigation through your presentation while recording. Pause or stop the recording at any point. To review the recorded audio, click ‘ Replay .’ To delete any recordings, click the ‘x’ next to the speaker icon.

At the bottom left, you’ll find two timers: one for the entire presentation and one for the specific slide, helping you keep track of the recording length.

Step 5: Stop Recording

When done, click the ‘X’ in the top right-hand corner. Your audio recordings will be saved to each slide, indicated by the speaker icon at the bottom right corner of your slide. 

Step 6: Share Recording

To share your recording, export the PowerPoint file as a video , selecting ‘Use Recorded Timings and Narrations.’ Then, easily share it via email or add it to a Learning Management System for convenient viewing.

Option 2: Record Audio for Specific Slides

Step 1: Navigate to the Desired Slide

Select the specific slide where you want to record audio. This could be for narration, background music, or sound effects, depending on your presentation’s needs.

Step 2: Insert Audio

To add audio, click the ‘Insert’ tab on your PowerPoint ribbon. Then in the Media section, select ‘Audio’ then ‘Record Audio’. 

Step 3: Name Audio Sound

Name the sound uniquely for easy future retrieval.

• Click the red ‘Recording’ button to start.
• Use the green ‘Play’ button to review the audio.
• If it’s satisfactory, click ‘OK.’
• The speaker icon will be added to your slide, and you can reposition it as needed.

Step 5: Set Audio Playback Options

After adding audio to your slide, you can specify how and when you want it to play. Click on the Audio icon and select the ‘Playback’ tab in the PowerPoint ribbon. 

In PowerPoint, utilize editing tools to refine your audio. Trim, adjust volume, and apply fade-in or fade-out effects for a professional touch. You can also set the start and stop points for the audio and save it for future use.

Step 6: Test Your Audio

Before your important presentation, test the audio to ensure it works smoothly. Play through your presentation to confirm that everything sounds and plays correctly.

Option 3: Adding Pre-Recorded Audio to PowerPoint

Already have the audio you want to use? No problem! Adding audio to your PowerPoint can be done in 4 simple steps:

Step 1: Navigate to the Slide

Select the slide where you want to addyour pre-recorded audio.

Click the ‘Insert’ tab and choose ‘Audio’ from the Media Section. Select ‘Audio on My PC’ and search for your pre-recorded audio to be uploaded. 

Step 3: Configure Playback Options

Customize your playback settings to suit your needs, such as when the audio should start and how it should play.

Step 4: Test it out

Ensure that the audio plays well and syncs up with your slide transitions and animations for a seamless presentation.

Expert Tips for the Best Recording

Use these tips to get the best recording in PowerPoint: 

• Choose the Right Microphone: Opt for a high-quality microphone for clear and professional audio. For frequent recordings, consider an external microphone.
• Minimize Ambient Noise: Record in a quiet space to reduce background noise. Close doors and windows, and use noise-canceling software if necessary.
• Prepare Your Narration: Outline your narration to ensure a structured delivery, preventing pauses or monotony. Avoid reading line by line.
• Practice Your Delivery: Practice your narration multiple times for improved flow and clarity. Utilize PowerPoint’s Speaker Coach for help with pace, tone, and filler words.
• Edit Minor Mistakes: Don’t worry about small errors during recording; you can edit them out later using PowerPoint’s editing tools.
• Enhance Accessibility: When recording the entire presentation, add closed captions or subtitles to make it accessible to a broader audience, including those with hearing impairments.

Bonus: Recording Interactive PowerPoint Presentations

Want to take your PowerPoint recordings to the next level? Include interactive elements in your PowerPoint recordings to engage your audience more effectively with ClassPoint.

ClassPoint is an interactive teaching tool that integrates directly into PowerPoint, Coffering live presentation engagement features such as interactive questions , gamification , and presentation tools !

When recording your presentation, use third-party recording software like Zoom, Teams, Loom, or Screencast-O-Matic, and incorporate ClassPoint features alongside your audio narration, like so:

1. Live Annotations

Use Pens , Highlighters , Shapes , and even Text Boxes to add notes and highlight the important information on your slides while recording.

2. Added Whiteboard Slides

Add variety to your presentation by annotating on a blank whiteboard slide of your choosing.

3. Laser Pen

ClassPoint’s laser can be used as a pen with disappearing ink and a spotlight when you press the ‘S’ key on your keyboard, allowing you to guide your audience’s attention more effectively.

4. Draggable Objects

Enhance audience understanding by moving objects on your slide as you explain , emphasize key concepts, and create visual associations.

5. Embedded Browser

If you need to search the web to emphasize a key point or show a video, simply open a browser within your presentation without interrupting your seamless presentation and recording.

6. Timer or Stopwatch

If you want your audience to reflect on a question or complete an activity independently, use the timer or stopwatch to create a brief pause before resuming your recording.

Final Thoughts

Whether you’re narrating a presentation for asynchronous viewing or incorporating audio into a live session, you’re now equipped with the knowledge of how to record audio on PowerPoint in the best way. 

With added audio, you can engage your audience in a way that ensures your message resonates, no matter where or when they access your content.

Begin experimenting with these techniques, and see how recording audio on PowerPoint and leveraging ClassPoint can transform your PowerPoint presentations, both live and virtually.

Recommended Readings

3 Ways to Watch & Insert Videos in PowerPoint

How to Add Notes to PowerPoint Presentations: A Comprehensive Guide

About Sara Wanasek

Try classpoint for free.

All-in-one teaching and student engagement in PowerPoint.

Supercharge your PowerPoint. Start today.

500,000+ people like you use ClassPoint to boost student engagement in PowerPoint presentations.

How to Add Voice Narration to a PowerPoint

Lee Stanton Lee Stanton is a versatile writer with a concentration on the software landscape, covering both mobile and desktop applications as well as online technologies. Read more December 11, 2020

When creating a PowerPoint presentation, voice narration can help to spice up your content and make it more engaging. This is especially true if you’re sending your presentation via email or when your audience is not in the same location as you.

In this article, we’re going to show you how to add voice narration to your PowerPoint presentation.

What’s PowerPoint Voice Narration?

PowerPoint’s voice narration is a feature that enables you to record and embed audio clips into your slide deck. You can then attach a narration icon on your slide, which plays when toggled. You can also set the audio to play automatically as the rest of the content is projected.

Preparation

Every successful and experienced PowerPoint enthusiast will tell you that the secret to making engaging and informative content lies in adequate preparation. To ensure that your presentation stands out, here are some tips:

Carefully Assemble Your Slide Deck

You should aim for a consistent presentation, where the content is presented in chronological order. You don’t want to end up with a presentation that is disorganized because that will make it difficult for your audience to follow. You’ll need to make sure that any audio clips you embed into your slide are not only in sync with the rest of the content but also form a clear and logical sequence of ideas in the minds of the audience.

Mental Preparation Is Key

After assembling all the necessary resources, ensure that you’re thoroughly familiar with the content. Only then can you project confidence into your voice narration. A good way to prepare is to scribble down the things you want to include in your narration well in advance. This helps you to come up with a mind map of the key points of your presentation.

Put the Mic to the test

Obviously, you need a microphone to record audio clips. Luckily, most modern computers come with an inbuilt microphone that needs minimal preparation. However, you’ll still want to make sure that you’re sufficiently audible. You can adjust things like volume by opening your computer’s settings and clicking on “Sound” in the menu on the left of your screen.

Quiet Environment

Non-ambient sounds can ruin even the best of presentations. Ensure that your room is nearly sound-proof before the recording starts. You should turn off things like fans and air conditioners.

How to Add Voice Narration to a PowerPoint Presentation

If you’re using any Microsoft package other than Office 365, here’s how you can add voice narration to your presentation:

PowerPoint automatically affixes a sound icon beneath every slide that has a voice narration. You’ll also notice that the time taken recording the slide is also included.

Once you’re done recording, it’s always a good idea to preview your slideshow. To do so, click on “Slide Show” on the Home tab in the menu bar. To listen to the audio you recorded for a particular slide, simply go to “Normal View” and click on the sound icon.

How to Add Voice Narration to PowerPoint Slides

Voice narration can be the difference between a presentation that impresses and one that truly stands out. Voice narration converts your presentation into a self-contained utility and provides your audience with a complete, self-teaching asset.

Here are the steps you should take to add voice narration to PowerPoint slides:

How to Insert Sound Effects in PowerPoint

Sound effects are a good way to make your slides more interesting to your audience. PowerPoint allows you to add a range of sounds to animations. What’s more, you have the option to play sounds every time you open a new slide during your presentation.

Before adding a sound, first, you have to create the animation effect. Here’s how you can add a sound effect to an animation:

How to Insert Music in PowerPoint

There can hardly be a better way to spice up your presentation than adding music. To play music across slides, here’s what you need to do:

And just like that, your music will start playing as soon as the slide is opened.

How to Add Voice Narration to PowerPoint on a Mac

If you own a Mac, adding voice narration to your PowerPoint presentation is straightforward.

• Click on “Slide Show” on the top menu.
• Select “Record Narration.” This will launch a new window.
• In the new window, specify the sound input device and input source.
• Click on “Record” to start recording. This launches the full-screen presentation mode.
• When done, press the escape key.
• Click on “Yes” when asked whether you’d like to save slide timings.
• PowerPoint automatically adds the speaker icon beneath each slide. To play the narration automatically every time the slide is opened, right-click on the speaker and select “Start Automatically.”

How to Add Voice Narration to PowerPoint on an iPad

You can add voice narration to a PowerPoint presentation on your iPad. Here’s how:

• Open the first slide of your presentation.
• Tap “Play.”
• Slide your finger down from the top right corner of your screen. This launches the Control Center. You’ll be able to see all recording options if you tap and hold the “Record” button.
• Tap the microphone button to turn it on.
• Select “Start Recording.” You’ll now have three seconds to prepare.
• Return to the Control center by tapping “Background.”
• Return to your presentation by tapping “Control Center Background.”
• Proceed to navigate through your slide deck as you add voice narration.
• When you’re done, slide your finger down from the top right corner of your screen to launch the Control Center. Then, tap the “Record” button.

Your recording will appear in the Photos app.

Additional FAQ

How do i add narration to powerpoint 365.

• Select “Slide Show.”

• You’ll be prompted to decide whether you want to start recording from the current slide or from the beginning. For best results, always start from the beginning. At this point, PowerPoint should automatically launch the slideshow mode.

• In the slideshow mode, you’ll notice a series of buttons on the top right corner. The first one, which appears in red, allows you to record. The second one stops the recording, while the third one allows you to play the audio recorded.

• The slide involving the recording is always on the main panel of the window. To begin recording a new slide, simply toggle the arrow on the right side of the window. To go back to the previous slide, toggle the arrow on the left. It’s important to note that PowerPoint automatically records the time spent on every slide.

• Use the buttons on the bottom right hand corner to toggle your mic and camera. If for some reason you want to repeat a part of the recording or all of it, PowerPoint will automatically delete the old recording and start you off on a clean slate. When you’re done recording, click on the middle, square-shaped button on the top left corner.

How Do I Voice Over a PowerPoint?

• Open the presentation and click on the “Slide Show” tab.

• Click on “Record Slide Show.”

• A dropdown menu will appear and prompt you to choose between starting recording from the beginning or from the current slide.

Create Engaging Content with Voice Narration

Voice narration may not be the most popular PowerPoint tool, but it presents a sure way to add an extra layer of quality to your presentations to make them more interesting and engaging. What’s your experience with the voice narration feature?

Let us know in the comments section.

Related Posts

Disclaimer: Some pages on this site may include an affiliate link. This does not effect our editorial in any way.

Paras Rastogi March 11, 2024

Lee Stanton December 21, 2023

Lee Stanton December 18, 2023

Send To Someone

Missing device.

Please enable JavaScript to submit this form.

How to Voice Record in PowerPoint

PowerPoint is one of the most popular software tools used for creating presentations in various fields such as education, business, and marketing. One of the key features of PowerPoint is the ability to add audio narration to your presentations, giving an extra dimension to the audience experience. In this article, we will guide you through the steps of how to voice record in PowerPoint and everything you need to know about it.

Table of Contents

Why add voice recordings to PowerPoint presentations?

Adding audio narration to your slides is an excellent way to engage your audience. It can help you emphasize key points in your presentation, create a personal connection with your audience, and make your presentation more engaging by adding audio cues to your slides. Additionally, it helps viewers to focus on the presentation content and reduces the likelihood of distraction during the presentation.

Another benefit of adding voice recordings to PowerPoint presentations is that it allows you to convey complex information more effectively. By using your voice to explain difficult concepts or ideas, you can help your audience better understand the material. This is especially useful for technical or scientific presentations where the subject matter may be challenging for some viewers.

Finally, adding voice recordings to your PowerPoint presentation can save you time and effort. Instead of having to present the material live, you can record your narration ahead of time and simply play it back during the presentation. This can be particularly helpful if you have a busy schedule or if you need to present the same material multiple times to different audiences.

Recording audio within PowerPoint – a step-by-step guide

Recording your audio narration within PowerPoint is a straightforward process. To begin, click on the “Insert” tab on the PowerPoint ribbon. Click on “Audio” and select “Record Audio”. You can then choose to start recording from the beginning of the slide or from the current slide. Click on “Record” and start speaking into your microphone. Once you are done recording, click on “Stop” and “Save”. That’s it – you have just recorded audio in PowerPoint!

It is worth noting that you can also record your audio outside PowerPoint and then import it into your presentation. In this case, click on “Insert” and then “Audio”. Select “Audio on my PC” and browse for your audio file.

Another useful feature of recording audio within PowerPoint is the ability to edit your recording. After you have recorded your audio, click on “Playback” on the PowerPoint ribbon. From here, you can trim the beginning and end of your recording, adjust the volume, and even add fade in and fade out effects. This can help you create a more polished and professional presentation.

Tips for recording high-quality audio in PowerPoint

If you want your audio narration to be of high quality, you have to pay attention to the following considerations:

• Use a quality microphone: The better the microphone quality, the better the sound quality of your recording. A desktop microphone or an external USB microphone is a good choice.
• Reduce ambient noise: Noise from the surroundings can ruin the recording quality. Choose a quiet room and turn off any background noise like fans or air conditioners.
• Speak clearly and confidently: Eliminate any crutches, stutters, “ums” and “ahs” from your speech. Emphasize on your key points using appropriate tone and voice modulation.

Another important consideration for recording high-quality audio in PowerPoint is to maintain a consistent distance from the microphone. If you move too close or too far away from the microphone, the sound quality can be affected. It is recommended to maintain a distance of about 6-8 inches from the microphone for optimal sound quality. Additionally, make sure to test your audio settings before recording to ensure that the microphone is working properly and the sound levels are balanced.

How to edit your voice recording in PowerPoint

After recording your audio, you can edit and trim it with ease within PowerPoint. Select the audio icon from your slide. Click on the “Playback” tab on the PowerPoint ribbon and choose “Trim Audio”. You can then set the start and end points of your audio file and save the changes.

Adding background music to your voiceover in PowerPoint

If you want to add background music to your audio narration, follow these simple steps:

• Insert the audio file you want to use as background music.
• Select the audio file and click on the “Playback” tab on the ribbon.
• Check the “Play in background” option on the “Audio Options” group. That’s it – you’ve added background music to your narration.

Best practices for using voice recordings in PowerPoint presentations

When adding a voiceover to your PowerPoint presentation, consider these best practices:

• Keep it short: Don’t overwhelm your audience with a long voiceover. Keep the narration concise and to-the-point.
• Plan ahead: Create a Script for your narration before recording to avoid any future confusion or mistakes.
• Add visual aids: If possible, add charts, images, and tables to reinforce the message in your voiceover.

Troubleshooting common issues when recording audio in PowerPoint

If you experience any of the following issues while recording audio in PowerPoint, try these troubleshooting tips:

• No sound: Check if your system has a working microphone and if it is selected as the default microphone device.
• Low volume: Ensure that the microphone volume settings are correctly set on your system and that the microphone is close enough to pick up your voice clearly.
• Sync issues: Make sure the recorded audio aligns correctly with your slides. If not, try rerecording or adjust the timing settings in the “Playback” tab.

Alternatives to voice recording in PowerPoint: pros and cons

If you decide not to use voice recordings in PowerPoint, consider the following alternatives:

• Live presentation: If you have the opportunity, consider delivering your presentation in person or through video conferencing to have a better connection with your audience and answer questions in real-time.
• Text-based slides: Use a text-based formatting approach to deliver the content of your presentation. This could be through bullet points, text, or diagrams.

How to share your narrated PowerPoint presentation with others

After recording your audio narration, you can easily share your presentation with others. When you have finished your recording, save your presentation in MP4 format, which makes it easier to send. Click on “File” and select “Export”. Under “Create a Video”, choose “MP4”. You can then choose the Quality of the video to export. Send your MP4 file via email or any other preferred method.

Using voice recordings to enhance e-learning courses and webinars

Adding audio narration to your e-learning courses and webinars can be an effective way to keep learners engaged and interested. Audio narration helps to highlight essential points and reinforces the key takeaways. Additionally, it can make the learning experience more interactive and memorable.

Advanced techniques for professional voiceovers in PowerPoint

If you’re interested in taking your voiceover narration to the next level, consider the following advanced techniques:

• Use software tools: There are many voice-over recording tools available online that offer extra features such as background noise reduction, voice editing, and voice modulation.
• Collaborate with professionals: Hire professional voice-over artists to create an engaging and impactful voiceover for your presentation.

Comparing built-in vs. external microphones for recording audio in PowerPoint

When considering the type of microphone to use when recording audio in PowerPoint, there are two general options to consider: built-in or external microphones.

The built-in microphone is generally easy to use and offers a basic audio recording quality. An external microphone, on the other hand, provides better sound quality and more control over the recording environment.

The benefits of visual aids alongside voiceovers in presentations

Visual aids are a great way to support your voiceover in your PowerPoint presentation. They provide extra context for your presentation, help to emphasize key points, and keep your audience engaged. Some popular visual aids that you can use in your presentation include diagrams, charts, images, and videos.

Adding captions and subtitles to your recorded audio for accessibility purposes

Adding captions and subtitles to your audio narration makes your presentation more accessible to individuals with hearing impairments or who speak different languages. Follow these steps to add captions and subtitles to your audio narration:

• Click on the audio icon, then click on “Playback”.
• Select “Closed Captions and Subtitles” and select the language.
• Add the text for each caption or subtitle.

Review of popular software tools for recording presentations with audio

There are various software tools available online to record PowerPoint presentations with audio. Popular examples include Camtasia and Adobe Presenter. These tools come with many features such as voice editing, background noise reduction, and captioning. It’s worth comparing them to select the one that best fits your needs and budget.

Importance of proper script preparation before recording a narration for a presentation

Having a well-planned script is essential for a successful narration. Scripts help to organize your thoughts beforehand, reduce repetition, and ensure the presentation stays on track. Follow these tips for preparing a script for your presentation:

• Bullet points: Start by bullet-pointing the content of your presentation.
• Write out each point: Write out the text to accompany each point in complete sentences.
• Rehearse: Practice reading the script aloud multiple times until it sounds natural and well-timed.

Step-by-step guide on how to record multiple voices on different slides within a single presentation

If you want to record multiple voices on different slides within a single presentation, follow these simple steps:

• Click on the slide in which you want to record the first voiceover.
• Go to the “Insert” tab, and click on “Audio”.
• Click on “Record Audio” and record your voiceover.
• Repeat for each slide in your presentation.

Recording tips when presenting live demonstrations or product features using screen capture software and combining it with an audio track on PowerPoint

If you are presenting live demonstrations or product features using screen capture software and combining it with an audio track on PowerPoint, follow these tips for the best results:

• Test your software: Ensure that your screen capture software works correctly and that the audio recording quality is high.
• Plan ahead: Plan out your product features and how best to present them in advance.
• Keep it short and engaging: Use concise steps, screenshots, highlight key features, and use your voice to reinforce the features to your audience.

Voice recording in PowerPoint can significantly enhance the impact of your presentation by delivering content with energy, enthusiasm, and clarity. In this article, we have covered everything you need to know about voice recording in PowerPoint, including how to record, edit, and share your narrated presentation with others to build an engaging and memorable experience that you and your audience will enjoy.

By humans, for humans - Best rated articles:

Excel report templates: build better reports faster, top 9 power bi dashboard examples, excel waterfall charts: how to create one that doesn't suck, beyond ai - discover our handpicked bi resources.

Explore Zebra BI's expert-selected resources combining technology and insight for practical, in-depth BI strategies.

We’ve been experimenting with AI-generated content, and sometimes it gets carried away. Give us a feedback and help us learn and improve! 🤍

Note: This is an experimental AI-generated article. Your help is welcome. Share your feedback with us and help us improve.

• Add animation Video
• Add transitions between slides Video
• Add, format, and record video Video
• Add and record audio Video

Add and record audio

Add and record audio, such as music, narration, or sound bites, to your PowerPoint presentation and select the playback options.

Add audio from your PC

Select Insert > Media >  Audio .

Select Audio on My PC .

In the Insert Audio dialog box, select the audio file you want to add.

Select Insert .

Record audio

Select Insert > Media > Audio .

Select Record Audio .

Type in a name for your audio file, select Record , and then speak.

Important:  Your device must have a microphone enabled in order to record audio.

To review your recording, select Stop and then select Play .

Select Record to re-record your clip, or select OK if you’re satisfied.

To move your clip, select and drag the audio icon to where you want it on the slide.

Note:  If you’re using more than one audio file per slide, it’s advisable to put the audio icon in the same spot on a slide to find it easily.

Select Play .

Change playback options

Select the audio icon and then select the Playback tab. Then select which options you'd like to use:

To trim the audio, select Trim and then use the red and green sliders to trim the audio file accordingly.

To fade in or fade out audio, change the number in the Fade Duration boxes.

To adjust volume, select Volume and select the setting you prefer.

To choose how the audio file starts, select the dropdown arrow and select an option:

In Click Sequence – Plays the audio file automatically with a click.

Automatically – Plays automatically once you advance to the slide that the audio file is on.

When Clicked On – Plays audio only when the icon is clicked on.

To choose how the audio plays in your presentation, select an option:

Play Across Slides – Plays one audio file across all slides.

Loop until Stopped – Plays an audio file on loop until it’s stopped manually by clicking the Play/Pause button.

To have the audio play continuously across all slides in the background, select Play in Background .

Delete audio

To delete audio, select the audio icon on the slide and press Delete.

Add audio to your PowerPoint presentation

Play music for the duration of your slide show

Need more help?

Want more options.

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Microsoft 365 subscription benefits

Microsoft 365 training

Microsoft security

Accessibility center

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.

Ask the Microsoft Community

Microsoft Tech Community

Windows Insiders

Microsoft 365 Insiders

Was this information helpful?

Thank you for your feedback.

Contribute to the Microsoft 365 and Office forum! Click  here  to learn more  💡

April 9, 2024

Contribute to the Microsoft 365 and Office forum!

Click  here  to learn more  💡

PowerPoint Top Forum Contributors: Steve Rindsberg  -  John Korchok   👍✅

April 17, 2024

PowerPoint Top Forum Contributors:

Steve Rindsberg  -  John Korchok   👍✅

• Search the community and support articles
• Microsoft 365 and Office
• Search Community member

Ask a new question

can you record audio on a shared powerpoint

can you record audio on a shared powerpoint project

Report abuse

Replies (1) .

• Independent Advisor

Hello Lourdy J, I’m Gunasekar and I will be happy to help you with your question, I am a Microsoft consumer like you. Yes, it's possible to record audio on a shared PowerPoint project. Here's how you can do it: 1. Open the PowerPoint project if you want to add audio to. 2. Click on the slide where you want to add audio. 3. Click on the Insert tab in the ribbon. 4. Click on the Audio button and select the type of audio you want to add (e.g. Audio on my PC, Online Audio). 5. Once you've selected the audio you want to add, it will appear on the slide. You can then use the Audio Tools tab in the ribbon to format the audio as desired. 6. To record audio, click on the Insert tab in the ribbon and then click on the Record Audio button. A new window will open up where you can record your audio. 7. After recording your audio, you can save it and it will be added to your PowerPoint slide. Note that the steps to record audio may vary depending on the version of PowerPoint you're using, but the general process should be similar. Additionally, keep in mind that the ability to record audio on a shared PowerPoint project may depend on the sharing platform you're using, so you may want to check with the platform's documentation or support team to confirm if this is possible. I hope this information helps. If you have any questions, please let me know and I will be happy to assist you further. Best regards, Gunasekar N

Was this reply helpful? Yes No

Sorry this didn't help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

Thanks for your feedback.

Question Info

• Norsk Bokmål
• Ελληνικά
• Русский
• עברית
• العربية
• ไทย
• 한국어
• 中文(简体)
• 中文(繁體)
• 日本語