- Lutron Electronics Manuals
- Configuration manual
Lutron Electronics PALLADIOM Configuration Manual
- page of 41 Go / 41
Table of Contents
Description, step 1: identify the hvac equipment and confirm device installation.
- Identify the HVAC Equipment
- Confirm Device Installation
Programming Menu Overview
Step 2: equipment configuration mode, step 3: select the hvac controller, step 4: set the smc55-hwqs basic parameters for system compatibility.
- (01B): System Type
- (02B): Heat Stages
- With Other Heat Stages
- (04B): Auxiliary Heat (Aux/W ) Upstage Delay
- (05B): Cool Stages
- (06B): Heat Fan Control
- (07B): Changeover/Reversing Valve (O/B) Type
- (08B): Valve / Element Type
- (09B): Fan Type
- (10B): 2-Pipe Mode
- (11B): Underfloor Heating Control
- Saving and Exiting Basic Configuration
Step 5: Set the SMC55-HWQS Advanced Parameters to Modify the Functionality of the HVAC System
- (01A) Function Type
- (02A) Temperature Sensor Type
- (06A) Minimum Fan on Time
- (07A) Extended Cool Fan Time (OCFT)
- (08A) Extended Heat Fan Time (OHFT)
- (11A) Cool Fan on Delay (CFOD)
- (12A) Heat Fan on Delay (HFOD)
- (18A) Standalone Temperature Operation Mode
- (19A) Standalone Temperature Fan Mode
- (30A) Cannot Reach Setpoint Timeout
- (31A) Cannot Reach Setpoint Action
- (70A) Minimum Compressor Run Time (MCRT)
- (71A) Minimum Compressor off Time (MCOT)
- (74A) Heat Stage 1-On Delta
- (75A) Heat Stage 1-Off Delta
- (76A) Heat Stage 2 (y /Aux)-On Delta
- (77A) Heat Stage 2-Off Delta
- (78A) Heat Stage 3 (Aux)-On Delta
- (79A) Heat Stage 3 (Aux)-Off Delta
- (80A) Cool Stage 1-On Delta
- (81A) Cool Stage 1-Off Delta
- (82A) Cool Stage 2-On Delta
- (83A) Cool Stage 2-Off Delta
- (84A) Compressor Cool Stage 2 Upstage Delay (CC2SUD)
- (85A) Compressor Heat Stage 2 Upstage Delay (CH2SUD)
- (88A) Reversing Valve Delay (RVD)
Advertisement
Quick Links
Related manuals for lutron electronics palladiom.
Summary of Contents for Lutron Electronics PALLADIOM
- Page 1 P/N 032498h P/N 032498h HomeWorks QS Palladiom Thermostat Configuration Guide...
Page 2: Table Of Contents
- Page 3 P/N 032498h Table of Contents (continued) Parameters Applicable for Radiant Underfloor Heating System ..................26 Radiant Underfloor Heating Control Summary ......................26 ..............26 Pulse Width Modulation (PWM) Temperature Control (for relay signals only) ........................26 0–10 V- Control (for 0–10 V- signal only) Duty Cycle Sample Adaptation (for both relay and 0–10 V- signals) ................26 ................................27...
Page 4: Description
Page 5: step 1: identify the hvac equipment and confirm device installation.
- Page 6 (continued) Confirm Device Installation (continued) If connecting the Palladiom Thermostat to the SMC55-HWQS, they must be connected over the HVAC controller communication link. Refer to Figure 1 for the wiring required to install the SMC55-HWQS with the thermostat. For hardware installation and wiring details refer to the HomeWorks QS Thermostat Installation Guide (P/N 043495) at www.lutron.com.
Page 7: Programming Menu Overview
Page 8: step 3: select the hvac controller, page 9: step 4: set the smc55-hwqs basic parameters for system compatibility.
- Page 10 P/N 032498h Step 4: Set the SMC55-HWQS Basic Parameters for System Compatibility (continued) Verify the wiring connections between the thermostat, the SMC55-HWQS, and HVAC equipment as shown in Figure 1 before starting to configure the SMC55-HWQS. Table 3 below lists the details of all the basic configuration parameters - applicable systems, basic configuration parameter index, description, default value, and the range of values for each parameter.
Page 11: (01B): System Type
Page 12: (03b): run auxiliary heat, page 13: (05b): cool stages, page 14: (08b): valve / element type, page 15: (10b): 2-pipe mode, page 16: (11b): underfloor heating control, page 17: saving and exiting basic configuration, page 18: step 5: set the smc55-hwqs advanced parameters to modify the functionality of the hvac system.
- Page 19 P/N 032498h Step 5: Set the SMC55-HWQS Advanced Parameters to Modify the Functionality of the HVAC System (continued) lists out the details of all the advanced configuration parameters. Some of the advanced parameters are applicable to Table 16 all types of HVAC equipment while some are applicable to a specific type of HVAC equipment. The table below also categorizes these parameters based on the type of applicable systems.
- Page 20 °F above setpoint to turn stage off. 0 °F 1 °F – 10 °F Stage 2 (Y ) Off Included with SMC55-HWQS version 7420 or newer, SMC55-RESI version 7302 or newer and HomeWorks Palladiom Thermostat version 1.10 or newer. Continued on next page...
- Page 21 2.0 °F 0 – 20 °F Temperature Cycles Per Hour Cycles per hour (CPH). 3 (20 minute signal period) 1-20 CPH Included with SMC55-HWQS version 7420 or newer and HomeWorks Palladiom Thermostat version 1.10 or newer. Continued on next page...
Page 22: Parameters Applicable To All Types Of Hvac Equipment
Page 23: (30a) cannot reach setpoint timeout, page 24: (74a) heat stage 1-on delta, page 25: (83a) cool stage 2-off delta.
- Page 26 The radiant floor control algorithm also uses a duty cycle sample adaptation. The purpose of the adaptation is to dynamically change the duty cycle according to the newly sampled temperature. Included with SMC55-HWQS version 7420 or newer and HomeWorks Palladiom Thermostat version 1.10 or newer. Continued on next page...
- Page 27 This parameter indicates whether or not the valves follow non-proportional 0–10 V- output. Set this parameter to ‘01’ if enabling non-proportional analog output for valves. When enabled, only two analog output values are used, 0 V- and 10 V-. Included with SMC55-HWQS version 7420 or newer and HomeWorks Palladiom Thermostat version 1.10 or newer. Continued on next page...
- Page 28 P/N 032498h Step 5: Set the SMC55-HWQS Advanced Parameters to Modify the Functionality of the HVAC System (continued) Parameters Applicable for 2-pipe Fan Coil Units This section lists out the details of the advanced configuration parameters applicable to 2-Pipe Fan Coil Units. (40A) Change Over to Heat for Pipe Temperature Use this parameter to indicate the temperature at which the operating mode of a 2-pipe FCU changes to heating.
- Page 29 P/N 032498h Step 6: Verification Follow the steps below to verify the system functionality. 1. Press the button to enter Auto operating mode. Confirm that ‘Auto’ is displayed 2. Press the button to cycle through the different supported fan modes and verify the fan is operational. 3.
- Page 30 P/N 032498h Troubleshooting Symptom Possible Cause Solution Check the wiring to confirm that Common Display is blank The thermostat does not have power. (Black) and V+ (Red) are connected to a 24–36 V- power supply. The thermostat temperature sensor is not functioning E0 shown on the master thermostat Contact Customer Assistance.
- Page 31 , G, and O , G, and O and G Conventional and G , and G Included with SMC55-HWQS version 7420 or newer, SMC55-RESI version 7302 or newer and HomeWorks Palladiom Thermostat version 1.10 or newer. Continued on next page...
- Page 32 Heat Stages Cool (Fan On) Stages (Fan On) HSP-H2N HSP-H1N HSP+H1F CSP-C1F CSP+C1N CSP+C2N Heating Cooling Included with SMC55-HWQS version 7420 or newer, SMC55-RESI version 7302 or newer and HomeWorks Palladiom Thermostat version 1.10 or newer. Continued on next page...
- Page 33 1 heat will continue until auxiliary can turn on. Included with SMC55-HWQS version 7420 or newer, SMC55-RESI version 7302 or newer and HomeWorks Palladiom Thermostat version 1.10 or newer. Continued on next page...
- Page 34 Note: If Aux / W heat is delayed due to an upstage timer, stage 1 and 2heat will continue until auxiliary can turn on. Included with SMC55-HWQS version 7420 or newer, SMC55-RESI version 7302 or newer and HomeWorks Palladiom Thermostat version 1.10 or newer.
- Page 35 03: Floor temperature only Included with SMC55-RESI version 7302 or newer and HomeWorks Palladiom Thermostat version 1.10 or newer. Included with SMC55-HWQS version 7420 or newer, SMC55-RESI version 7302 or newer and HomeWorks Palladiom Thermostat version 1.10 or newer. Continued on next page...
- Page 36 P/N 032498h Appendix B: Installation Worksheet (continued) Job Name: HVAC system type: Table 21: Advanced Configuration Parameters for the SMC55-HWQS Advanced Applicable Value to Configuration Name Description Default Value Range Systems be Set Parameter 0: Operate with thermostat Function Type 1: Standalone 2: Not Configured 0 –...
- Page 37 ) Off Included with SMC55-RESI version 7302 or newer and HomeWorks Palladiom Thermostat version 1.10 or newer. Included with SMC55-HWQS version 7420 or newer, SMC55-RESI version 7302 or newer and HomeWorks Palladiom Thermostat version 1.10 or newer. Continued on next page...
- Page 38 2.0 °F 0 – 20 ºF Temperature 3 (20 minute Cycles Per Hour Cycles per hour. 1-20 CPH signal period) Included with SMC55-HWQS version 7420 or newer, SMC55-RESI version 7302 or newer and HomeWorks Palladiom Thermostat version 1.10 or newer.
- Page 39 P/N 032498h Appendix C: User Interface for the Thermostat Once the system is configured, verify the user interface and functionality of the thermostat. The following steps illustrate details about the user interface of the thermostat. 1. Press the button to cycle through the different available fan modes. The fan modes cycle through only those modes which are selected during configuration.
- Page 40 P/N 032498h Appendix C: User Interface for the Thermostat (continued) 6. In Auto mode, you will see both heat and cool setpoints as shown in the image below: AUTO Auto Heat setpoint is represented by the symbol next to the setpoint value whereas the cool setpoint is represented by the Heat On Cool On symbol next to the setpoint value.
- Page 41 P/N 032498h Lutron, HomeWorks, and Palladiom are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries. All other product names, logos, and brands are property of their respective owners. Lutron Contact Numbers WORLD HEADQUARTERS...
Rename the bookmark
Delete bookmark, delete from my manuals, upload manual.
- Bahasa Indonesia
- Eastern Europe
- Moscow Oblast
Elektrostal
Elektrostal Localisation : Country Russia , Oblast Moscow Oblast . Available Information : Geographical coordinates , Population, Area, Altitude, Weather and Hotel . Nearby cities and villages : Noginsk , Pavlovsky Posad and Staraya Kupavna .
Information
Find all the information of Elektrostal or click on the section of your choice in the left menu.
- Update data
Elektrostal Demography
Information on the people and the population of Elektrostal.
Elektrostal Geography
Geographic Information regarding City of Elektrostal .
Elektrostal Distance
Distance (in kilometers) between Elektrostal and the biggest cities of Russia.
Elektrostal Map
Locate simply the city of Elektrostal through the card, map and satellite image of the city.
Elektrostal Nearby cities and villages
Elektrostal weather.
Weather forecast for the next coming days and current time of Elektrostal.
Elektrostal Sunrise and sunset
Find below the times of sunrise and sunset calculated 7 days to Elektrostal.
Elektrostal Hotel
Our team has selected for you a list of hotel in Elektrostal classified by value for money. Book your hotel room at the best price.
Elektrostal Nearby
Below is a list of activities and point of interest in Elektrostal and its surroundings.
Elektrostal Page
- Information /Russian-Federation--Moscow-Oblast--Elektrostal#info
- Demography /Russian-Federation--Moscow-Oblast--Elektrostal#demo
- Geography /Russian-Federation--Moscow-Oblast--Elektrostal#geo
- Distance /Russian-Federation--Moscow-Oblast--Elektrostal#dist1
- Map /Russian-Federation--Moscow-Oblast--Elektrostal#map
- Nearby cities and villages /Russian-Federation--Moscow-Oblast--Elektrostal#dist2
- Weather /Russian-Federation--Moscow-Oblast--Elektrostal#weather
- Sunrise and sunset /Russian-Federation--Moscow-Oblast--Elektrostal#sun
- Hotel /Russian-Federation--Moscow-Oblast--Elektrostal#hotel
- Nearby /Russian-Federation--Moscow-Oblast--Elektrostal#around
- Page /Russian-Federation--Moscow-Oblast--Elektrostal#page
- Terms of Use
- Copyright © 2024 DB-City - All rights reserved
- Change Ad Consent Do not sell my data
IMAGES
VIDEO
COMMENTS
The HomeWorks Palladiom HVAC controller works with residential HVAC systems including: Conventional forced air systems using gas, electric, or oil heat, as well as compressor-based cooling-only as split systems or packaged units. Heat pumps with or without auxiliary heat2. Fan coil units.
In the HomeWorks commissioning software, do the following to configure the split system control: Select the Palladiom Thermostat in the Controls tab. Select: "Displays a split equipment HVAC zone". In the example below, two SMC55-RESI controllers are used: One for heating and one for cooling. In the Equipment tab:
Page 1 P/N 032498h P/N 032498h HomeWorks QS Palladiom Thermostat Configuration Guide ... HVAC controller selection mode: Indicates what type of HVAC controller is being used and sets the address for it (if needed). 3. Page 8: Step 3: Select The Hvac Controller (3 seconds). b. For controller selection mode - Release the buttons and immediately ...
Features. Utilize within a myRoom hospitality system. Controls fan coil units with the following configurations: 2-pipe with auxiliary heat and 4-pipe fan coil. 2-position (open/close), 3-position, pulse width modulation and. 0-10V water valves. 3-speed fans. Built-in vandal-resistant, passive infrared sensor with XCT technology detects occupancy.
The HomeWorks Palladiom HVAC controller works with residential HVAC systems including: • Conventional forced air systems using gas, electric, or oil heat, as well as compressor-based cooling-only as ... QS link2 HomeWorks Palladiom HVAC controller signals HVAC equipment (by others) HomeWorks Palladiom Palladiom thermostat (master) HomeWorks
Features. Connects to and controls 1 zone of HVAC equipment using standard 24 VAC thermostat wiring. Integrates temperature control with a HomeWorks QS system — multiple HVAC controllers can be used in a total control system. Program your thermostat schedule using Home Control+ app for iPhone , iPod touch, and iPad® †, as well as Android ...
HomeWorks QS Palladiom HVAC Controller • Works with most residential HVAC systems. • Utilizes commonly used control wiring and 24 V from HVAC equipment transformer or other power supply rated 12-24 V~ 50 / 60 Hz, 24 V-, +/− 10%, SELV • Supports an optional wired remote temperature sensor to allow for flexibility
HomeWorks QS Palladiom Thermostat & HVAC Controller: 24 - 36 V: English (pdf) HQWT-T-HW : HomeWorks QS Palladiom Thermostat & HVAC Controller: 24 - 36 V: French (pdf) HQWT-T-HW : HomeWorks QS Palladiom Thermostat & HVAC Controller: 24 - 36 V: Spanish (pdf) Back to top. Wallplates & Accessories Model Number Model Product Description Voltage
Elektrostal , lit: Electric and Сталь , lit: Steel) is a city in Moscow Oblast, Russia, located 58 kilometers east of Moscow. Population: 155,196 ; 146,294 ...
Elektrostal Geography. Geographic Information regarding City of Elektrostal. Elektrostal Geographical coordinates. Latitude: 55.8, Longitude: 38.45. 55° 48′ 0″ North, 38° 27′ 0″ East. Elektrostal Area. 4,951 hectares. 49.51 km² (19.12 sq mi) Elektrostal Altitude.
Search 151 Elektrostal' custom fireplace contractors & installers to find the best fireplace contractor for your project. See the top reviewed local fireplace services and installers in Elektrostal', Moscow Oblast, Russia on Houzz.
Many people would say it's choosing the right Elektrostal' home builder. Constructing a new custom house is a huge and multifaceted undertaking, so it's important to find custom house builders in Elektrostal', Moscow Oblast, Russia you can trust to bring your vision to life, as well as keep the process under control from start to finish.
Palladiom HVAC Controller Antique Brass (QB) 10. 11 Ordering Order control HQWT - T - HW - _____ - A model Example: HQWT-T-HW-SN-A Order Palladiom HVAC Controller ... • Utilize the Engraving Manager in the HomeWorks QS software to specify and order your engraving and redeem the engraving credit for an engraved button kit. Backlit text Backlit ...