assignment fill in the blank exercise 14.06

• school Campus Bookshelves
• menu_book Bookshelves
• perm_media Learning Objects
• login Login
• how_to_reg Request Instructor Account
• hub Instructor Commons
• Download Page (PDF)
• Download Full Book (PDF)
• Periodic Table
• Physics Constants
• Scientific Calculator
• Reference & Cite
• Tools expand_more
• Readability

selected template will load here

This action is not available.

14.6: Summary and Exercises

• Last updated
• Save as PDF
• Page ID 21989

The general rule that the promisee may assign any right has some exceptions—for example, when the promisor’s obligation would be materially changed. Of course the contract itself may prohibit assignment, and sometimes statutes preclude it. Knowing how to make the assignment effective and what the consequences of the assignment are on others is worth mastering. When, for example, does the assignee not stand in the assignor’s shoes? When may a future right be assigned?

Duties, as well as rights, may be transferred to third parties. Most rights (promises) contained in contracts have corresponding duties (also expressed as promises). Often when an entire contract is assigned, the duties go with it; the transferee is known, with respect to the duties, as the delegatee. The transferor himself does not necessarily escape the duty, however. Moreover, some duties are nondelegable, such as personal promises and those that public policy require to be carried out by a particular official. Without the ability to assign rights and duties, much of the modern economy would grind to a halt.

The parties to a contract are not necessarily the only people who acquire rights or duties under it. One major category of persons acquiring rights is third-party beneficiaries. Only intended beneficiaries acquire rights under the contract, and these are of two types: creditor and donee beneficiaries. The rules for determining whether rights have been conferred are rather straightforward; determining whether rights can subsequently be modified or extinguished is more troublesome. Generally, as long as the contract does not prohibit change and as long as the beneficiary has not relied on the promise, the change may be made.

• The Dayton Country Club offered its members various social activities. Some members were entitled, for additional payment, to use the golf course, a coveted amenity. Golfing memberships could not be transferred except upon death or divorce, and there was a long waiting list in this special category; if a person at the top of the list declined, the next in line was eligible. Golfing membership rules were drawn up by a membership committee. Magness and Redman were golfing members. They declared bankruptcy, and the bankruptcy trustee sought, in order to increase the value of their debtors’ estates, to assume and sell the golfing memberships to members on the waiting list, other club members, or the general public, provided the persons joined the club. The club asserted that under relevant state law, it was “excused from rendering performance to an entity other than the debtor”—that is, it could not be forced to accept strangers as members. Can these memberships be assigned?
• Tenant leased premises in Landlord’s shopping center, agreeing in the lease “not to assign, mortgage, pledge, or encumber this lease in whole or in part.” Under the lease, Tenant was entitled to a construction allowance of up to $11,000 after Tenant made improvements for its uses. Prior to the completion of the improvements, Tenant assigned its right to receive the first $8,000 of the construction allowance to Assignee, who, in turn, provided Tenant $8,000 to finance the construction. Assignee notified Landlord of the assignment, but when the construction was complete, Landlord paid Tenant anyway; when Assignee complained, Landlord pointed to the nonassignment clause. Assignee sued Landlord. Who wins? Aldana v. Colonial Palms Plaza, Inc. , 591 So.2d 953 (Fla. Ct. App., 1991).
• Marian contracted to sell her restaurant to Billings for $400,000. The contract provided that Billings would pay $100,000 and sign a note for the remainder. Billings sold the restaurant to Alice, who agreed to assume responsibility for the balance due on the note held by Marian. But Alice had difficulties and declared bankruptcy. Is Billings still liable on the note to Marian?

Yellow Cab subcontracted with Metro Limousine to provide transportation in connection with its contract with the board. Thereafter, Metro purchased two buses from Yellow Cab to use in transporting the students. DuPont, a Metro employee, was injured when the brakes on the bus that he was driving failed, causing the bus to collide with a tree. DuPont sued Yellow Cab, alleging that under its contract with the board, Yellow Cab had a nondelegable duty to properly maintain the bus so as to keep it in a safe operating condition; that that duty flowed to him as an intended third-party beneficiary of the contract; and that Yellow Cab had breached the contract by failing to properly maintain the bus. Who wins? DuPont v. Yellow Cab Co. of Birmingham, Inc. , 565 So.2d 190 (Ala. 1990).

• Joan hired Groom to attend to her herd of four horses at her summer place in the high desert. The job was too much for Groom, so he told Tony that he (Groom) would pay Tony, who claimed expertise in caring for horses, to take over the job. Tony neglected the horses in hot weather, and one of them needed veterinarian care for dehydration. Is Groom liable?
• Rensselaer Water Company contracted with the city to provide water for business, domestic, and fire-hydrant purposes. While the contract was in effect, a building caught on fire; the fire spread to Plaintiff’s (Moch Co.’s) warehouse, destroying it and its contents. The company knew of the fire but was unable to supply adequate water pressure to put it out. Is the owner of the warehouse able to maintain a claim against the company for the loss?
• Rusty told Alice that he’d do the necessary overhaul on her classic car for $5,000 during the month of May, and that when the job was done, she should send the money to his son, Jim, as a graduation present. He confirmed the agreement in writing and sent a copy to Jim. Subsequently, Rusty changed his mind. What right has Jim?
• Fox Brothers agreed to convey to Clayton Canfield Lot 23 together with a one-year option to purchase Lot 24 in a subdivision known as Fox Estates. The agreement contained no prohibitions, restrictions, or limitations against assignments. Canfield paid the $20,000 and took title to Lot 23 and the option to Lot 24. Canfield thereafter assigned his option rights in Lot 24 to the Scotts. When the Scotts wanted to exercise the option, Fox Brothers refused to convey the property to them. The Scotts then brought suit for specific performance. Who wins?
• Rollins sold Byers, a businessperson, a flatbed truck on a contract; Rollins assigned the contract to Frost, and informed Byers of the assignment. Rollins knew the truck had problems, which he did not reveal to Byers. When the truck needed $3,200 worth of repairs and Rollins couldn’t be found, Byers wanted to deduct that amount from payments owed to Frost, but Frost insisted he had a right to payment. Upon investigation, Byers discovered that four other people in the state had experienced similar situations with Rollins and with Frost as Rollins’s assignee. What recourse has Byers?
• Merchants and resort owners in the San Juan Islands in Washington State stocked extra supplies, some perishable, in anticipation of the flood of tourists over Labor Day. They suffered inconvenience and monetary damage due to the union’s Labor Day strike of the state ferry system, in violation of its collective bargaining agreement with the state and of a temporary restraining order. The owners sued the union for damages for lost profits, attorney fees, and costs, claiming the union should be liable for intentional interference with contractual relations (the owners’ relations with their would-be customers). Do the owners have a cause of action?

SELF-TEST QUESTIONS

• A creditor beneficiary is a. the same as a donee beneficiary b. a third-party beneficiary c. an incidental beneficiary d. none of the above
• Assignments are not allowed a. for rights that will arise from a future contract b. when they will materially change the duties that the obligor must perform c. where they are forbidden by public policy d. for any of the above
• When an assignor assigns the same interest twice, a. the subsequent assignee generally takes precedence b. the first assignee generally takes precedence c. the first assignee always takes precedence d. the assignment violates public policy
• Factoring a. is an example of delegation of duties b. involves using an account receivable as collateral for a loan c. involves the purchase of a right to receive income from another d. is all of the above
• Personal promises a. are always delegable b. are generally not delegable c. are delegable if not prohibited by public policy d. are delegable if not barred by the contract

SELF-TEST AnswerS

Game Central

• school Campus Bookshelves
• menu_book Bookshelves
• perm_media Learning Objects
• login Login
• how_to_reg Request Instructor Account
• hub Instructor Commons
• Download Page (PDF)
• Download Full Book (PDF)
• Periodic Table
• Physics Constants
• Scientific Calculator
• Reference & Cite
• Tools expand_more
• Readability

selected template will load here

This action is not available.

14.1E: Exercises for Section 14.1

• Last updated
• Save as PDF
• Page ID 67808

For the following exercises, evaluate each function at the indicated values.

1) \( W(x,y)=4x^2+y^2.\) Find \( W(2,−1), W(−3,6)\).

2) \( W(x,y)=4x^2+y^2\). Find \( W(2+h,3+h).\)

3) The volume of a right circular cylinder is calculated by a function of two variables, \( V(x,y)=πx^2y,\) where \( x\) is the radius of the right circular cylinder and \( y\) represents the height of the cylinder. Evaluate \( V(2,5)\) and explain what this means.

4) An oxygen tank is constructed of a right cylinder of height \( y\) and radius \( x\) with two hemispheres of radius \( x\) mounted on the top and bottom of the cylinder. Express the volume of the cylinder as a function of two variables, \( x\) and \( y\), find \( V(10,2)\), and explain what this means.

For exercises 5 - 10, find the domain and range of the given function. State the domain in set-builder notation and the range in interval notation.

5) \( V(x,y)=4x^2+y^2\)

6) \( f(x,y)=\sqrt{x^2+y^2−4}\)

7) \( f(x,y)=4\ln(y^2−x)\)

8) \( g(x,y)=\sqrt{16−4x^2−y^2}\)

9) \( z=\arccos(y−x)\)

10) \( f(x,y)=\dfrac{y+2}{x^2}\)

Find the range of the functions.

11) \( g(x,y)=\sqrt{16−4x^2−y^2}\)

12) \( V(x,y)=4x^2+y^2\)

13) \( z=y^2−x^2\)

In exercises 14 - 29, find the level curves of each function at the indicated values of \( c\) to visualize the given function. Sketch a contour plot for those exercises where you are asked for more than 3 values of \(c\).

14) \( z(x,y)=y^2−x^2, \quad c=1\)

15) \( z(x,y)=y^2−x^2,\quad c=4\)

16) \( g(x,y)=x^2+y^2;\quad c=0, 1, 2, 3, 4, 9\)

17) \( g(x,y)=4−x−y;\quad c=0,1, 2, 3, 4\)

18) \( f(x,y)=xy;c=1;\quad c=−1\)

19) \( h(x,y)=2x−y;\quad c=-2,0,2\)

20) \( f(x,y)=x^2−y;\quad c=1,2\)

21) \( g(x,y)=\dfrac{x}{x+y};c=−1,0,1,2\)

22) \( g(x,y)=x^3−y;\quad c=−1,0,2\)

23) \( g(x,y)=e^{xy};\quad c=\frac{1}{2},3\)

24) \( f(x,y)=x^2;\quad c=4,9\)

25) \( f(x,y)=xy−x;\quad c=−2,0,2\)

26) \( h(x,y)=\ln(x^2+y^2);\quad c=−1,0,1\)

27) \( g(x,y)=\ln\left(\dfrac{y}{x^2}\right);\quad c=−2,0,2\)

28) \( z=f(x,y)=\sqrt{x^2+y^2},\quad c=3\)

29) \( f(x,y)=\dfrac{y+2}{x^2},\quad c=\) any constant

In exercises 30-32, find the vertical traces of the functions at the indicated values of \( x\) and \( y\), and plot the traces.

30) \( z=4−x−y, \quad x=2\)

31) \( f(x,y)=3x+y^3, \quad x=1\)

\( z=3+y^3,\) a curve in the \(zy\)-plane with rulings parallel to the \(x\)-axis

32) \( z=\cos\sqrt{x^2+y^2}, \quad x=1\)

In exercises 33 - 38, find the domain and range of each function.

33) \( z=\sqrt{100−4x^2−25y^2}\)

34) \( z=\ln(x−y^2)\)

35) \( f(x,y,z)=\dfrac{1}{\sqrt{36−4x^2−9y^2−z^2}}\)

36) \( f(x,y,z)=\sqrt{49−x^2−y^2−z^2}\)

37) \( f(x,y,z)=\sqrt[3]{16−x^2−y^2−z^2}\)

38) \( f(x,y)=\cos\sqrt{x^2+y^2}\)

In exercises 39 - 40, plot a graph of the function.

39) \( z=f(x,y)=\sqrt{x^2+y^2}\)

40) \( z=x^2+y^2\)

41) Use technology to graph \( z=x^2y.\)

In exercises 42 - 46, sketch the function by finding its level curves. Verify the graph using technology, such as CalcPlot3D.

42) \( f(x,y)=\sqrt{4−x^2−y^2}\)

43) \( f(x,y)=2−\sqrt{x^2+y^2}\)

44) \( z=1+e^{−x^2−y^2}\)

45) \( z=\cos\sqrt{x^2+y^2}\)

46) \( z=y^2−x^2\)

47) Describe the contour lines for several values of \( c\) for \( z=x^2+y^2−2x−2y.\)

In exercises, 48 - 52, find the level surface for the given value of \(c\) for each function of three variables and describe it.

48) \( w(x,y,z)=x−2y+z,\quad c=4\)

49) \( w(x,y,z)=x^2+y^2+z^2,\quad c=9\)

50) \( w(x,y,z)=x^2+y^2−z^2,\quad c=−4\)

51) \( w(x,y,z)=x^2+y^2−z^2,\quad c=4\)

52) \( w(x,y,z)=9x^2−4y^2+36z^2,\quad c=0\)

In exercises 53 - 55, find an equation of the level curve of \( f\) that contains the point \( P\).

53) \( f(x,y)=1−4x^2−y^2,\quad P(0,1)\)

54) \( g(x,y)=y^2\arctan x,\quad P(1,2)\)

55) \( g(x,y)=e^{xy}(x^2+y^2),\quad P(1,0)\)

56) The strength \( E\) of an electric field at point \( (x,y,z)\) resulting from an infinitely long charged wire lying along the \(y\)-axis is given by \( E(x,y,z)=k/\sqrt{x^2+y^2}\), where \( k\) is a positive constant. For simplicity, let \( k=1\) and find the equations of the level surfaces for \( E=10\) and \( E=100.\)

57) A thin plate made of iron is located in the \(xy\)-plane The temperature \( T\) in degrees Celsius at a point \( P(x,y)\) is inversely proportional to the square of its distance from the origin. Express \( T\) as a function of \( x\) and \( y\).

58) Refer to the preceding problem. Using the temperature function found there, determine the proportionality constant if the temperature at point \( P(1,2)\) is \( 50°C.\) Use this constant to determine the temperature at point \( Q(3,4).\)

59) Refer to the preceding problem. Find the level curves for \( T=40°C\) and \( T=100°C,\) and describe what the level curves represent.

Contributors

Gilbert Strang (MIT) and Edwin “Jed” Herman (Harvey Mudd) with many contributing authors. This content by OpenStax is licensed with a CC-BY-SA-NC 4.0 license. Download for free at http://cnx.org .

• Paul Seeburger (Monroe Community College) added the contour plots to answers for problems 17, 21 and 29.

• school Campus Bookshelves
• menu_book Bookshelves
• perm_media Learning Objects
• login Login
• how_to_reg Request Instructor Account
• hub Instructor Commons
• Download Page (PDF)
• Download Full Book (PDF)
• Periodic Table
• Physics Constants
• Scientific Calculator
• Reference & Cite
• Tools expand_more
• Readability

selected template will load here

This action is not available.

14.E: Fluid Mechanics (Exercises)

• Last updated
• Save as PDF
• Page ID 6640

Conceptual Questions

14.1 fluids, density, and pressure.

• Which of the following substances are fluids at room temperature and atmospheric pressure: air, mercury, water, glass?
• Why are gases easier to compress than liquids and solids?
• Explain how the density of air varies with altitude.
• The image shows a glass of ice water filled to the brim. Will the water overflow when the ice melts? Explain your answer.

• How is pressure related to the sharpness of a knife and its ability to cut?
• Why is a force exerted by a static fluid on a surface always perpendicular to the surface?
• Imagine that in a remote location near the North Pole, a chunk of ice floats in a lake. Next to the lake, a glacier with the same volume as the floating ice sits on land. If both chunks of ice should melt due to rising global temperatures, and the melted ice all goes into the lake, which one would cause the level of the lake to rise the most? Explain.
• In ballet, dancing en pointe (on the tips of the toes) is much harder on the toes than normal dancing or walking. Explain why, in terms of pressure.
• Atmospheric pressure exerts a large force (equal to the weight of the atmosphere above your body—about 10 tons) on the top of your body when you are lying on the beach sunbathing. Why are you able to get up?
• Why does atmospheric pressure decrease more rapidly than linearly with altitude?
• The image shows how sandbags placed around a leak outside a river levee can effectively stop the flow of water under the levee. Explain how the small amount of water inside the column of sandbags is able to balance the much larger body of water behind the levee.

• Is there a net force on a dam due to atmospheric pressure? Explain your answer.
• Does atmospheric pressure add to the gas pressure in a rigid tank? In a toy balloon? When, in general, does atmospheric pressure not affect the total pressure in a fluid?
• You can break a strong wine bottle by pounding a cork into it with your fist, but the cork must press directly against the liquid filling the bottle—there can be no air between the cork and liquid. Explain why the bottle breaks only if there is no air between the cork and liquid.

14.2 Measuring Pressure

• Explain why the fluid reaches equal levels on either side of a manometer if both sides are open to the atmosphere, even if the tubes are of different diameters.

14.3 Pascal's Principle and Hydraulics

• Suppose the master cylinder in a hydraulic system is at a greater height than the cylinder it is controlling. Explain how this will affect the force produced at the cylinder that is being controlled.

14.4 Archimedes’ Principle and Buoyancy

• More force is required to pull the plug in a full bathtub than when it is empty. Does this contradict Archimedes’ principle? Explain your answer.
• Do fluids exert buoyant forces in a “weightless” environment, such as in the space shuttle? Explain your answer.
• Will the same ship float higher in salt water than in freshwater? Explain your answer.
• Marbles dropped into a partially filled bathtub sink to the bottom. Part of their weight is supported by buoyant force, yet the downward force on the bottom of the tub increases by exactly the weight of the marbles. Explain why.

14.5 Fluid Dynamics

• Many figures in the text show streamlines. Explain why fluid velocity is greatest where streamlines are closest together. ( Hint : Consider the relationship between fluid velocity and the cross-sectional area through which the fluid flows.)

14.6 Bernoulli’s Equation

• You can squirt water from a garden hose a considerably greater distance by partially covering the opening with your thumb. Explain how this works.
• Water is shot nearly vertically upward in a decorative fountain and the stream is observed to broaden as it rises. Conversely, a stream of water falling straight down from a faucet narrows. Explain why.
• Look back to Figure 14.29. Answer the following two questions. Why is p o less than atmospheric? Why is p o greater than p i ?
• A tube with a narrow segment designed to enhance entrainment is called a Venturi, such as shown below. Venturis are very commonly used in carburetors and aspirators. How does this structure bolster entrainment?

• Some chimney pipes have a T-shape, with a crosspiece on top that helps draw up gases whenever there is even a slight breeze. Explain how this works in terms of Bernoulli’s principle.
• Is there a limit to the height to which an entrainment device can raise a fluid? Explain your answer.
• Why is it preferable for airplanes to take off into the wind rather than with the wind?
• Roofs are sometimes pushed off vertically during a tropical cyclone, and buildings sometimes explode outward when hit by a tornado. Use Bernoulli’s principle to explain these phenomena.
• It is dangerous to stand close to railroad tracks when a rapidly moving commuter train passes. Explain why atmospheric pressure would push you toward the moving train.
• Water pressure inside a hose nozzle can be less than atmospheric pressure due to the Bernoulli effect. Explain in terms of energy how the water can emerge from the nozzle against the opposing atmospheric pressure.
• David rolled down the window on his car while driving on the freeway. An empty plastic bag on the floor promptly flew out the window. Explain why.
• Based on Bernoulli’s equation, what are three forms of energy in a fluid? (Note that these forms are conservative, unlike heat transfer and other dissipative forms not included in Bernoulli’s equation.)
• The old rubber boot shown below has two leaks. To what maximum height can the water squirt from Leak 1? How does the velocity of water emerging from Leak 2 differ from that of Leak 1? Explain your responses in terms of energy

14.7 Viscosity and Turbulence

• Explain why the viscosity of a liquid decreases with temperature, that is, how might an increase in temperature reduce the effects of cohesive forces in a liquid? Also explain why the viscosity of a gas increases with temperature, that is, how does increased gas temperature create more collisions between atoms and molecules?
• When paddling a canoe upstream, it is wisest to travel as near to the shore as possible. When canoeing downstream, it is generally better to stay near the middle. Explain why.
• Plumbing usually includes air-filled tubes near water faucets (see the following figure). Explain why they are needed and how they work.
• Doppler ultrasound can be used to measure the speed of blood in the body. If there is a partial constriction of an artery, where would you expect blood speed to be greatest: at or after the constriction? What are the two distinct causes of higher resistance in the constriction?
• Sink drains often have a device such as that shown below to help speed the flow of water. How does this work?

• Gold is sold by the troy ounce (31.103 g). What is the volume of 1 troy ounce of pure gold?
• Mercury is commonly supplied in flasks containing 34.5 kg (about 76 lb.). What is the volume in liters of this much mercury?
• What is the mass of a deep breath of air having a volume of 2.00 L? Discuss the effect taking such a breath has on your body’s volume and density.
• A straightforward method of finding the density of an object is to measure its mass and then measure its volume by submerging it in a graduated cylinder. What is the density of a 240-g rock that displaces 89.0 cm 3 of water? (Note that the accuracy and practical applications of this technique are more limited than a variety of others that are based on Archimedes’ principle.)
• Suppose you have a coffee mug with a circular cross-section and vertical sides (uniform radius). What is its inside radius if it holds 375 g of coffee when filled to a depth of 7.50 cm? Assume coffee has the same density as water.
• A rectangular gasoline tank can hold 50.0 kg of gasoline when full. (a) What is the depth of the tank if it is 0.500-m wide by 0.900-m long? (b) Discuss whether this gas tank has a reasonable volume for a passenger car.
• A trash compactor can compress its contents to 0.350 times their original volume. Neglecting the mass of air expelled, by what factor is the density of the rubbish increased?
• A 2.50-kg steel gasoline can holds 20.0 L of gasoline when full. What is the average density of the full gas can, taking into account the volume occupied by steel as well as by gasoline?
• What is the density of 18.0-karat gold that is a mixture of 18 parts gold, 5 parts silver, and 1 part copper? (These values are parts by mass, not volume.) Assume that this is a simple mixture having an average density equal to the weighted densities of its constituents.
• The tip of a nail exerts tremendous pressure when hit by a hammer because it exerts a large force over a small area. What force must be exerted on a nail with a circular tip of 1.00-mm diameter to create a pressure of 3.00 x 10 9 N/m 2 ? (This high pressure is possible because the hammer striking the nail is brought to rest in such a short distance.)
• A glass tube contains mercury. What would be the height of the column of mercury which would create pressure equal to 1.00 atm?
• The greatest ocean depths on Earth are found in the Marianas Trench near the Philippines. Calculate the pressure due to the ocean at the bottom of this trench, given its depth is 11.0 km and assuming the density of seawater is constant all the way down.
• Verify that the SI unit of h\(\rho\)g is N/m 2 .
• What pressure is exerted on the bottom of a gas tank that is 0.500-m wide and 0.900-m long and can hold 50.0 kg of gasoline when full?
• A dam is used to hold back a river. The dam has a height H = 12 m and a width W = 10 m. Assume that the density of the water is \(\rho\) = 1000 kg/m 3 . (a) Determine the net force on the dam. (b) Why does the thickness of the dam increase with depth?

• Find the gauge and absolute pressures in the balloon and peanut jar shown in Figure 14.12, assuming the manometer connected to the balloon uses water and the manometer connected to the jar contains mercury. Express in units of centimeters of water for the balloon and millimeters of mercury for the jar, taking h = 0.0500m for each.
• How tall must a water-filled manometer be to measure blood pressure as high as 300 mm Hg?
• Assuming bicycle tires are perfectly flexible and support the weight of bicycle and rider by pressure alone, calculate the total area of the tires in contact with the ground if a bicycle and rider have a total mass of 80.0 kg, and the gauge pressure in the tires is 3.50 x 10 5 Pa .
• How much pressure is transmitted in the hydraulic system considered in Example 14.3? Express your answer in atmospheres.
• What force must be exerted on the master cylinder of a hydraulic lift to support the weight of a 2000-kg car (a large car) resting on a second cylinder? The master cylinder has a 2.00-cm diameter and the second cylinder has a 24.0-cm diameter.
• A host pours the remnants of several bottles of wine into a jug after a party. The host then inserts a cork with a 2.00-cm diameter into the bottle, placing it in direct contact with the wine. The host is amazed when the host pounds the cork into place and the bottom of the jug (with a 14.0-cm diameter) breaks away. Calculate the extra force exerted against the bottom if he pounded the cork with a 120-N force.
• A certain hydraulic system is designed to exert a force 100 times as large as the one put into it. (a) What must be the ratio of the area of the cylinder that is being controlled to the area of the master cylinder? (b) What must be the ratio of their diameters? (c) By what factor is the distance through which the output force moves reduced relative to the distance through which the input force moves? Assume no losses due to friction.
• Verify that work input equals work output for a hydraulic system assuming no losses due to friction. Do this by showing that the distance the output force moves is reduced by the same factor that the output force is increased. Assume the volume of the fluid is constant. What effect would friction within the fluid and between components in the system have on the output force? How would this depend on whether or not the fluid is moving?
• What fraction of ice is submerged when it floats in freshwater, given the density of water at 0 °C is very close to 1000 kg/m 3 ?
• If a person’s body has a density of 995 kg/m 3 , what fraction of the body will be submerged when floating gently in (a) freshwater? (b) In salt water with a density of 10 27 kg/m 3 ?
• A rock with a mass of 540 g in air is found to have an apparent mass of 342 g when submerged in water. (a) What mass of water is displaced? (b) What is the volume of the rock? (c) What is its average density? Is this consistent with the value for granite?
• Archimedes’ principle can be used to calculate the density of a fluid as well as that of a solid. Suppose a chunk of iron with a mass of 390.0 g in air is found to have an apparent mass of 350.5 g when completely submerged in an unknown liquid. (a) What mass of fluid does the iron displace? (b) What is the volume of iron, using its density as given in Table 14.1? (c) Calculate the fluid’s density and identify it.
• (a) Calculate the buoyant force on a 2.00-L helium balloon. (b) Given the mass of the rubber in the balloon is 1.50 g, what is the net vertical force on the balloon if it is let go? Neglect the volume of the rubber.
• (a) What is the density of a woman who floats in fresh water with 4.00% of her volume above the surface? (This could be measured by placing her in a tank with marks on the side to measure how much water she displaces when floating and when held under water.) (b) What percent of her volume is above the surface when she floats in seawater?
• A man has a mass of 80 kg and a density of 955 kg/m 3 (excluding the air in his lungs). (a) Calculate his volume. (b) Find the buoyant force air exerts on him. (c) What is the ratio of the buoyant force to his weight?
• A simple compass can be made by placing a small bar magnet on a cork floating in water. (a) What fraction of a plain cork will be submerged when floating in water? (b) If the cork has a mass of 10.0 g and a 20.0-g magnet is placed on it, what fraction of the cork will be submerged? (c) Will the bar magnet and cork float in ethyl alcohol?
• What percentage of an iron anchor’s weight will be supported by buoyant force when submerged in salt water?
• Referring to Figure 14.20, prove that the buoyant force on the cylinder is equal to the weight of the fluid displaced (Archimedes’ principle). You may assume that the buoyant force is F 2 − F 1 and that the ends of the cylinder have equal areas A. Note that the volume of the cylinder (and that of the fluid it displaces) equals (h 2 − h 1 )A.
• A 75.0-kg man floats in freshwater with 3.00% of his volume above water when his lungs are empty, and 5.00% of his volume above water when his lungs are full. (a) Calculate the volume of air he inhales—called his lung capacity—in liters. (b) Does this lung volume seem reasonable?
• What is the average flow rate in cm 3 /s of gasoline to the engine of a car traveling at 100 km/h if it averages 10.0 km/L?
• The heart of a resting adult pumps blood at a rate of 5.00 L/min. (a) Convert this to cm 3 /s. (b) What is this rate in m 3 /s?
• The Huka Falls on the Waikato River is one of New Zealand’s most visited natural tourist attractions. On average, the river has a flow rate of about 300,000 L/s. At the gorge, the river narrows to 20-m wide and averages 20-m deep. (a) What is the average speed of the river in the gorge? (b) What is the average speed of the water in the river downstream of the falls when it widens to 60 m and its depth increases to an average of 40 m?
• (a) Estimate the time it would take to fill a private swimming pool with a capacity of 80,000 L using a garden hose delivering 60 L/min. (b) How long would it take if you could divert a moderate size river, flowing at 5000 m 3 /s into the pool?
• (a) What is the fluid speed in a fire hose with a 9.00-cm diameter carrying 80.0 L of water per second? (b) What is the flow rate in cubic meters per second? (c) Would your answers be different if salt water replaced the fresh water in the fire hose?
• Water is moving at a velocity of 2.00 m/s through a hose with an internal diameter of 1.60 cm. (a) What is the flow rate in liters per second? (b) The fluid velocity in this hose’s nozzle is 15.0 m/s. What is the nozzle’s inside diameter?
• Prove that the speed of an incompressible fluid through a constriction, such as in a Venturi tube, increases by a factor equal to the square of the factor by which the diameter decreases. (The converse applies for flow out of a constriction into a larger-diameter region.)
• Water emerges straight down from a faucet with a 1.80-cm diameter at a speed of 0.500 m/s. (Because of the construction of the faucet, there is no variation in speed across the stream.) (a) What is the flow rate in cm 3 /s? (b) What is the diameter of the stream 0.200 m below the faucet? Neglect any effects due to surface tension.
• Verify that pressure has units of energy per unit volume.
• Suppose you have a wind speed gauge like the pitot tube shown in Figure 14.32. By what factor must wind speed increase to double the value of h in the manometer? Is this independent of the moving fluid and the fluid in the manometer?
• If the pressure reading of your pitot tube is 15.0 mm Hg at a speed of 200 km/h, what will it be at 700 km/h at the same altitude?
• Every few years, winds in Boulder, Colorado, attain sustained speeds of 45.0 m/s (about 100 mph) when the jet stream descends during early spring. Approximately what is the force due to the Bernoulli equation on a roof having an area of 220m 2 ? Typical air density in Boulder is 1.14 kg/m 3 , and the corresponding atmospheric pressure is 8.89 x 10 4 N/m 2 . (Bernoulli’s principle as stated in the text assumes laminar flow. Using the principle here produces only an approximate result, because there is significant turbulence.)
• (a) What is the pressure drop due to the Bernoulli Effect as water goes into a 3.00-cm-diameter nozzle from a 9.00-cm-diameter fire hose while carrying a flow of 40.0 L/s? (b) To what maximum height above the nozzle can this water rise? (The actual height will be significantly smaller due to air resistance.)
• (a) Using Bernoulli’s equation, show that the measured fluid speed v for a pitot tube, like the one in Figure 14.32(b), is given by v = \(\left(\dfrac{2 \rho' gh}{\rho} \right)^{1/2}\), where h is the height of the manometer fluid, \(\rho′\) is the density of the manometer fluid, \(\rho\) is the density of the moving fluid, and g is the acceleration due to gravity. (Note that v is indeed proportional to the square root of h, as stated in the text.) (b) Calculate v for moving air if a mercury manometer’s h is 0.200 m.
• A container of water has a cross-sectional area of A = 0.1 m 2 . A piston sits on top of the water (see the following figure). There is a spout located 0.15 m from the bottom of the tank, open to the atmosphere, and a stream of water exits the spout. The cross sectional area of the spout is A s = 7.0 x 10 −4 m 2 . (a) What is the velocity of the water as it leaves the spout? (b) If the opening of the spout is located 1.5 m above the ground, how far from the spout does the water hit the floor? Ignore all friction and dissipative forces.

• A fluid of a constant density flows through a reduction in a pipe. Find an equation for the change in pressure, in terms of v 1 , A 1 , A 2 , and the density.

• (a) Calculate the retarding force due to the viscosity of the air layer between a cart and a level air track given the following information: air temperature is 20 °C, the cart is moving at 0.400 m/s, its surface area is 2.50 x 10 −2 m 2 , and the thickness of the air layer is 6.00 x 10 −5 m. (b) What is the ratio of this force to the weight of the 0.300-kg cart?
• The arterioles (small arteries) leading to an organ constrict in order to decrease flow to the organ. To shut down an organ, blood flow is reduced naturally to 1.00% of its original value. By what factor do the radii of the arterioles constrict?
• A spherical particle falling at a terminal speed in a liquid must have the gravitational force balanced by the drag force and the buoyant force. The buoyant force is equal to the weight of the displaced fluid, while the drag force is assumed to be given by Stokes Law, F s = 6\(\pi \eta\)v. Show that the terminal speed is given by v = \(\frac{2R^{2} g}{9 \eta} (\rho_{s} − \rho_{1})\), where R is the radius of the sphere, \(\rho_{s}\) is its density, and \(\rho_{1}\) is the density of the fluid, and \(\eta\) the coefficient of viscosity.
• Using the equation of the previous problem, find the viscosity of motor oil in which a steel ball of radius 0.8 mm falls with a terminal speed of 4.32 cm/s. The densities of the ball and the oil are 7.86 and 0.88 g/mL, respectively.
• A skydiver will reach a terminal velocity when the air drag equals his or her weight. For a skydiver with a large body, turbulence is a factor at high speeds. The drag force then is approximately proportional to the square of the velocity. Taking the drag force to be F D = \(\frac{1}{2} \rho Av^{2}\), and setting this equal to the skydiver’s weight, find the terminal speed for a person falling “spread eagle.”
• (a) Verify that a 19.0% decrease in laminar flow through a tube is caused by a 5.00% decrease in radius, assuming that all other factors remain constant. (b) What increase in flow is obtained from a 5.00% increase in radius, again assuming all other factors remain constant?
• When physicians diagnose arterial blockages, they quote the reduction in flow rate. If the flow rate in an artery has been reduced to 10.0% of its normal value by a blood clot and the average pressure difference has increased by 20.0%, by what factor has the clot reduced the radius of the artery?
• An oil gusher shoots crude oil 25.0 m into the air through a pipe with a 0.100-m diameter. Neglecting air resistance but not the resistance of the pipe, and assuming laminar flow, calculate the pressure at the entrance of the 50.0-m-long vertical pipe. Take the density of the oil to be 900 kg/m 3 and its viscosity to be 1.00(N/m 2 ) • s (or 1.00 Pa • s). Note that you must take into account the pressure due to the 50.0-m column of oil in the pipe.
• Concrete is pumped from a cement mixer to the place it is being laid, instead of being carried in wheelbarrows. The flow rate is 200 L/min through a 50.0-m-long, 8.00-cm-diameter hose, and the pressure at the pump is 8.00 x 10 6 N/m 2 . (a) Calculate the resistance of the hose. (b) What is the viscosity of the concrete, assuming the flow is laminar? (c) How much power is being supplied, assuming the point of use is at the same level as the pump? You may neglect the power supplied to increase the concrete’s velocity.
• Verify that the flow of oil is laminar for an oil gusher that shoots crude oil 25.0 m into the air through a pipe with a 0.100-m diameter. The vertical pipe is 50 m long. Take the density of the oil to be 900 kg/m 3 and its viscosity to be 1.00(N/m 2 ) • s (or 1.00 Pa • s).
• Calculate the Reynolds numbers for the flow of water through (a) a nozzle with a radius of 0.250 cm and (b) a garden hose with a radius of 0.900 cm, when the nozzle is attached to the hose. The flow rate through hose and nozzle is 0.500 L/s. Can the flow in either possibly be laminar?
• A fire hose has an inside diameter of 6.40 cm. Suppose such a hose carries a flow of 40.0 L/s starting at a gauge pressure of 1.62 x 10 6 N/m 2 . The hose goes 10.0 m up a ladder to a nozzle having an inside diameter of 3.00 cm. Calculate the Reynolds numbers for flow in the fire hose and nozzle to show that the flow in each must be turbulent.
• At what flow rate might turbulence begin to develop in a water main with a 0.200-m diameter? Assume a 20 °C temperature.

Additional Problems

• Before digital storage devices, such as the memory in your cell phone, music was stored on vinyl disks with grooves with varying depths cut into the disk. A phonograph used a needle, which moved over the grooves, measuring the depth of the grooves. The pressure exerted by a phonograph needle on a record is surprisingly large. If the equivalent of 1.00 g is supported by a needle, the tip of which is a circle with a 0.200-mm radius, what pressure is exerted on the record in Pa?
• Water towers store water above the level of consumers for times of heavy use, eliminating the need for high-speed pumps. How high above a user must the water level be to create a gauge pressure of 3.00 x 10 5 N/m 2 ?
• The aqueous humor in a person’s eye is exerting a force of 0.300 N on the 1.10-cm 2 area of the cornea. What pressure is this in mm Hg?
• (a) Convert normal blood pressure readings of 120 over 80 mm Hg to newtons per meter squared using the relationship for pressure due to the weight of a fluid (p = h\(\rho\)g) rather than a conversion factor. (b) Explain why the blood pressure of an infant would likely be smaller than that of an adult. Specifically, consider the smaller height to which blood must be pumped.
• Pressure cookers have been around for more than 300 years, although their use has greatly declined in recent years (early models had a nasty habit of exploding). How much force must the latches holding the lid onto a pressure cooker be able to withstand if the circular lid is 25.0 cm in diameter and the gauge pressure inside is 300 atm? Neglect the weight of the lid.
• Bird bones have air pockets in them to reduce their weight—this also gives them an average density significantly less than that of the bones of other animals. Suppose an ornithologist weighs a bird bone in air and in water and finds its mass is 45.0 g and its apparent mass when submerged is 3.60 g (assume the bone is watertight). (a) What mass of water is displaced? (b) What is the volume of the bone? (c) What is its average density?
• In an immersion measurement of a woman’s density, she is found to have a mass of 62.0 kg in air and an apparent mass of 0.0850 kg when completely submerged with lungs empty. (a) What mass of water does she displace? (b) What is her volume? (c) Calculate her density. (d) If her lung capacity is 1.75 L, is she able to float without treading water with her lungs filled with air?
• Some fish have a density slightly less than that of water and must exert a force (swim) to stay submerged. What force must an 85.0-kg grouper exert to stay submerged in salt water if its body density is 1015 kg/m 3 ?
• The human circulation system has approximately 1 x 10 9 capillary vessels. Each vessel has a diameter of about 8 \(\mu\)m. Assuming cardiac output is 5 L/min, determine the average velocity of blood flow through each capillary vessel.
• The flow rate of blood through a 2.00 x 10 −6 m-radius capillary is 3.80 x 10 9 cm 3 /s. (a) What is the speed of the blood flow? (b) Assuming all the blood in the body passes through capillaries, how many of them must there be to carry a total flow of 90.0 cm 3 /s?
• The left ventricle of a resting adult’s heart pumps blood at a flow rate of 83.0 cm 3 /s, increasing its pressure by 110 mm Hg, its speed from zero to 30.0 cm/s, and its height by 5.00 cm. (All numbers are averaged over the entire heartbeat.) Calculate the total power output of the left ventricle. Note that most of the power is used to increase blood pressure.
• A sump pump (used to drain water from the basement of houses built below the water table) is draining a flooded basement at the rate of 0.750 L/s, with an output pressure of 3.00 x 10 5 N/m 2 . (a) The water enters a hose with a 3.00-cm inside diameter and rises 2.50 m above the pump. What is its pressure at this point? (b) The hose goes over the foundation wall, losing 0.500 m in height, and widens to 4.00 cm in diameter. What is the pressure now? You may neglect frictional losses in both parts of the problem.
• A glucose solution being administered with an IV has a flow rate of 4.00 cm 3 /min. What will the new flow rate be if the glucose is replaced by whole blood having the same density but a viscosity 2.50 times that of the glucose? All other factors remain constant.
• A small artery has a length of 1.1 x 10 −3 m and a radius of 2.5 x 10 −5 m. If the pressure drop across the artery is 1.3 kPa, what is the flow rate through the artery? (Assume that the temperature is 37 °C.)
• Angioplasty is a technique in which arteries partially blocked with plaque are dilated to increase blood flow. By what factor must the radius of an artery be increased in order to increase blood flow by a factor of 10?
• Suppose a blood vessel’s radius is decreased to 90.0% of its original value by plaque deposits and the body compensates by increasing the pressure difference along the vessel to keep the flow rate constant. (a) By what factor must the pressure difference increase? (b) If turbulence is created by the obstruction, what additional effect would it have on the flow rate?

Challenge Problems

• The pressure on the dam shown early in the problems section increases with depth. Therefore, there is a net torque on the dam. Find the net torque.
• The temperature of the atmosphere is not always constant and can increase or decrease with height. In a neutral atmosphere, where there is not a significant amount of vertical mixing, the temperature decreases at a rate of approximately 6.5 K per km. The magnitude of the decrease in temperature as height increases is known as the lapse rate (Γ). (The symbol is the upper case Greek letter gamma.) Assume that the surface pressure is p 0 = 1.013 x 10 5 Pa where T = 293 K and the lapse rate is (\(\Gamma\) = 6.5 K/km). Estimate the pressure 3.0 km above the surface of Earth.
• A submarine is stranded on the bottom of the ocean with its hatch 25.0 m below the surface. Calculate the force needed to open the hatch from the inside, given it is circular and 0.450 m in diameter. Air pressure inside the submarine is 1.00 atm.
• Logs sometimes float vertically in a lake because one end has become water-logged and denser than the other. What is the average density of a uniform-diameter log that floats with 20.0% of its length above water?
• Scurrilous con artists have been known to represent gold-plated tungsten ingots as pure gold and sell them at prices much below gold value but high above the cost of tungsten. With what accuracy must you be able to measure the mass of such an ingot in and out of water to tell that it is almost pure tungsten rather than pure gold?
• The inside volume of a house is equivalent to that of a rectangular solid 13.0 m wide by 20.0 m long by 2.75 m high. The house is heated by a forced air gas heater. The main uptake air duct of the heater is 0.300 m in diameter. What is the average speed of air in the duct if it carries a volume equal to that of the house’s interior every 15 minutes?
• A garden hose with a diameter of 2.0 cm is used to fill a bucket, which has a volume of 0.10 cubic meters. It takes 1.2 minutes to fill. An adjustable nozzle is attached to the hose to decrease the diameter of the opening, which increases the speed of the water. The hose is held level to the ground at a height of 1.0 meters and the diameter is decreased until a flower bed 3.0 meters away is reached. (a) What is the volume flow rate of the water through the nozzle when the diameter is 2.0 cm? (b) What is the speed of the water coming out of the hose? (c) What does the speed of the water coming out of the hose need to be to reach the flower bed 3.0 meters away? (d) What is the diameter of the nozzle needed to reach the flower bed?
• A frequently quoted rule of thumb in aircraft design is that wings should produce about 1000 N of lift per square meter of wing. (The fact that a wing has a top and bottom surface does not double its area.) (a) At takeoff, an aircraft travels at 60.0 m/s, so that the air speed relative to the bottom of the wing is 60.0 m/s. Given the sea level density of air as 1.29 kg/m 3 , how fast must it move over the upper surface to create the ideal lift? (b) How fast must air move over the upper surface at a cruising speed of 245 m/s and at an altitude where air density is one-fourth that at sea level? (Note that this is not all of the aircraft’s lift—some comes from the body of the plane, some from engine thrust, and so on. Furthermore, Bernoulli’s principle gives an approximate answer because flow over the wing creates turbulence.)
• Two pipes of equal and constant diameter leave a water pumping station and dump water out of an open end that is open to the atmosphere (see the following figure). The water enters at a pressure of two atmospheres and a speed of (v 1 = 1.0 m/s). One pipe drops a height of 10 m. What is the velocity of the water as the water leaves each pipe?

• Fluid originally flows through a tube at a rate of 100 cm 3 /s. To illustrate the sensitivity of flow rate to various factors, calculate the new flow rate for the following changes with all other factors remaining the same as in the original conditions. (a) Pressure difference increases by a factor of 1.50. (b) A new fluid with 3.00 times greater viscosity is substituted. (c) The tube is replaced by one having 4.00 times the length. (d) Another tube is used with a radius 0.100 times the original. (e) Yet another tube is substituted with a radius 0.100 times the original and half the length, and the pressure difference is increased by a factor of 1.50.
• During a marathon race, a runner’s blood flow increases to 10.0 times her resting rate. Her blood’s viscosity has dropped to 95.0% of its normal value, and the blood pressure difference across the circulatory system has increased by 50.0%. By what factor has the average radii of her blood vessels increased?
• Water supplied to a house by a water main has a pressure of 3.00 x 10 5 N/m 2 early on a summer day when neighborhood use is low. This pressure produces a flow of 20.0 L/min through a garden hose. Later in the day, pressure at the exit of the water main and entrance to the house drops, and a flow of only 8.00 L/min is obtained through the same hose. (a) What pressure is now being supplied to the house, assuming resistance is constant? (b) By what factor did the flow rate in the water main increase in order to cause this decrease in delivered pressure? The pressure at the entrance of the water main is 5.00 x 10 5 N/m 2 , and the original flow rate was 200 L/ min. (c) How many more users are there, assuming each would consume 20.0 L/min in the morning?
• Gasoline is piped underground from refineries to major users. The flow rate is 3.00 x 10 −2 m 3 /s (about 500 gal/min), the viscosity of gasoline is 1.00 x 10 −3 (N/m 2 ) • s, and its density is 680 kg/m 3 . (a) What minimum diameter must the pipe have if the Reynolds number is to be less than 2000? (b) What pressure difference must be maintained along each kilometer of the pipe to maintain this flow rate?

Contributors and Attributions

Samuel J. Ling (Truman State University), Jeff Sanny (Loyola Marymount University), and Bill Moebs with many contributing authors. This work is licensed by OpenStax University Physics under a  Creative Commons Attribution License (by 4.0) .

• school Campus Bookshelves
• menu_book Bookshelves
• perm_media Learning Objects
• login Login
• how_to_reg Request Instructor Account
• hub Instructor Commons
• Download Page (PDF)
• Download Full Book (PDF)
• Periodic Table
• Physics Constants
• Scientific Calculator
• Reference & Cite
• Tools expand_more
• Readability

selected template will load here

This action is not available.

14.E: Regression (Exercises)

• Last updated
• Save as PDF
• Page ID 2650

• Rice University

General Questions

What is the equation for a regression line? What does each term in the line refer to? (relevant section)

The formula for a regression equation based on a sample size of \(25\) observations is \(Y' = 2X + 9\).

• What would be the predicted score for a person scoring \(6\) on \(X\)?
• If someone's predicted score was \(14\), what was this person's score on \(X\)? (relevant section)

What criterion is used for deciding which regression line fits best? (relevant section)

What does the standard error of the estimate measure? What is the formula for the standard error of the estimate? (relevant section)

• In a regression analysis, the sum of squares for the predicted scores is \(100\) and the sum of squares error is \(200\), what is \(R^2\)?
• In a different regression analysis, \(40\%\) of the variance was explained. The sum of squares total is \(1000\). What is the sum of squares of the predicted values? (relevant section)

For the \(X,Y\) data below, compute:

• \(r\) and determine if it is significantly different from zero.
• the slope of the regression line and test if it differs significantly from zero.
• the \(95\%\) confidence interval for the slope.

(relevant section)

What assumptions are needed to calculate the various inferential statistics of linear regression? (relevant section)

The correlation between years of education and salary in a sample of \(20\) people from a certain company is \(0.4\). Is this correlation statistically significant at the \(0.05\) level? (relevant section)

A sample of \(X\) and \(Y\) scores is taken, and a regression line is used to predict \(Y\) from \(X\). If \(SSY' = 300\), \(SSE = 500\), and \(N = 50\), what is: (relevant section relevant section)

• the standard error of the estimate?

Using linear regression, find the predicted post-test score for someone with a score of \(43\) on the pre-test. (relevant section)

The equation for a regression line predicting the number of hours of TV watched by children (\(Y\)) from the number of hours of TV watched by their parents (\(X\)) is \(Y' = 4 + 1.2X\). The sample size is \(12\).

• If the standard error of \(b\) is \(0.4\), is the slope statistically significant at the \(0.05\) level? (relevant section)
• If the mean of \(X\) is \(8\), what is the mean of \(Y\)? (relevant section)

Based on the table below, compute the regression line that predicts \(Y\) from \(X\). (relevant section)

Does \(A\) or \(B\) have a larger standard error of the estimate? (relevant section)

True/false: If the slope of a simple linear regression line is statistically significant, then the correlation will also always be significant. (relevant section)

True/false: If the slope of the relationship between \(X\) and \(Y\) is larger for \(\text{Population 1}\) than for \(\text{Population 2}\), the correlation will necessarily be larger in \(\text{Population 1}\) than in \(\text{Population 1}\). Why or why not? (relevant section)

True/false: If the correlation is \(0.8\), then \(40\%\) of the variance is explained. (relevant section)

True/false: If the actual \(Y\) score was \(31\), but the predicted score was \(28\), then the error of prediction is \(3\). (relevant section)

Questions from Case Studies

The following question is from the Angry Moods (AM) case study.

(AM#23) Find the regression line for predicting Anger-Out from Control-Out.

• What is the slope?
• What is the intercept?
• Is the relationship at least approximately linear?
• Test to see if the slope is significantly different from \(0\).
• What is the standard error of the estimate?

(relevant section, relevant section, relevant section)

The following question is from the SAT and GPA (SG) case study.

(SG#3) Find the regression line for predicting the overall university GPA from the high school GPA.

• What is the \(y\)-intercept?
• If someone had a \(2.2\) GPA in high school, what is the best estimate of his or her college GPA?
• If someone had a \(4.0\) GPA in high school, what is the best estimate of his or her college GPA?

The following questions are from the Driving (D) case study.

(D#5) What is the correlation between age and how often the person chooses to drive in inclement weather? Is this correlation statistically significant at the \(0.01\) level? Are older people more or less likely to report that they drive in inclement weather? (relevant section, relevant section )

(D#8) What is the correlation between how often a person chooses to drive in inclement weather and the percentage of accidents the person believes occur in inclement weather? Is this correlation significantly different from \(0\)? (relevant section, relevant section )

(D#10) Use linear regression to predict how often someone rides public transportation in inclement weather from what percentage of accidents that person thinks occur in inclement weather. (Pubtran by Accident)

• Create a scatter plot of this data and add a regression line.
• Test if the slope is significantly different from \(0\).
• Comment on possible assumption violations for the test of the slope.

Selected Answers

• \(b = 1.91\)

\(a = 19.2\)

\(r = 0.43\)

• Online Class
• Ask Doubt on Whatsapp
• Search Doubtnut

Complete Solutions to Assignment ((A) Choose the correct atlernative answer and fill in the blanks): of chapter LINEAR EQUATIONS IN TWO VARIABLES of Class 10 book with complete answers and questions

Sum of two number is 45 and the greater number is twice the smaller number . Find the numbers.

A man travels 370 km partly by train and partly by car. If he covers 250 km by train and the rest by car, it takes him 4 hours. But, if he travels 130 km by train and the rest by car, he takes 18 minutes longer. Find the speed of the train and that of the car.

Assignment ((A) Choose the correct atlernative answer and fill in the blanks): questions and complete solutions for chapter LINEAR EQUATIONS IN TWO VARIABLES of CHETAN MATHS (TAMIL ENGLISH) of Class 10

All Exercises from CHETAN PUBLICATION Class 10 MATHS LINEAR EQUATIONS IN TWO VARIABLES

• Assignment ((A) Choose the correct atlernative answer and fill in the blanks):
• Assignment (Perform the following activities : (Any 1) )
• Assignment (Perform the following activities : (Any 2) )
• Assignment ( (B) Solve the following questions):
• Assignment (Attempt the following : (Any 2))
• Practic Set -1.1
• Practic set -1.2
• Practic set -1.3
• Practic set -1.4
• Practic set -1.5
• Problem Set - 1
• Problems for practice (Based on practice Set 1 . 1) Solve the following simultaneous equations :
• Problems for practice (Based on practice Set 1 . 2) Solve the following simultaneous equations using Graphical method:
• Problems for practice (Based on practice Set 1 . 3) Find the value of following determinans :
• Problems for practice (Based on practice Set 1 . 3) Solve the following simultaneous equatiosn using Cramers method :
• Problems for practice (Based on practice Set 1 . 4) Solve the following simultaneous equatiosns:
• Problems for practice (Based on practice Set 1 . 5) Solve the following simultaneous equatiosns: