what are research objectives in dissertation

• How it works

How to Write the Dissertation Aims and Objectives – Guide & Examples

Published by Grace Graffin at January 27th, 2023 , Revised On October 9, 2023

Aims and objectives are among the essential aspects of a dissertation. If you write aims and objectives effectively, they can act as a foundation to give your research clarity and focus.

This article will provide you with all the necessary information regarding aims and objectives, their differences, writing tips , and the common mistakes you should avoid while writing them.

The aim is often a single sentence or a short paragraph that describes your dissertation’s main goal and intent. It tells what you hope to achieve at the end. You should write the aim so that it becomes identifiable when it is achieved with the completion of your dissertation .

The aim is written in a subsection of the introduction to clarify the overall purpose of the dissertation .

Example: It is often observed that employees in culturally diverse workplaces struggle to work effectively in a team. A probable cause of this issue is bullying at the workplace. This research investigates the impact of bullying on employee job satisfaction at culturally diverse workplaces and the resulting loss of employee productivity. This research will use surveys and case study analysis to analyze the impact of bullying on employees.

The objectives in a dissertation describe the ways through which you intend to achieve the research aim. They are specific statements that break down the aim into several smaller key sections of the overall research. Suitable objectives can help you stay focused and conduct research in the direction of your aim.

The number of objectives should be realistic; usually, between three to six, and each one should be possible to achieve. The following example shows the objectives for the previously-mentioned dissertation aim.

1. identification of the behaviors that are considered as bullying 2. exploring the factors that cause bullying at a culturally diverse workplace 3. analyzing the relationship between bullying and job satisfaction of employees 4. providing suitable recommendations on minimizing the bullying at the workplace

The objectives of a dissertation should be SMART.

• Specific: should be precise, focused, and well-defined
• Measurable: the progress should be measurable, and you should be able to determine when you have achieved an objective.
• Achievable: you should be able to carry out the required action within your available resources
• Relevant: should be related to the dissertation aim
• Time-bound: should be possible within the available time

Differences between aims and objectives

Aims and objectives are often mixed, but there are clear differences between them.

Hire an Expert Writer

Orders completed by our expert writers are

• Formally drafted in an academic style
• Free Amendments and 100% Plagiarism Free – or your money back!
• 100% Confidential and Timely Delivery!
• Free anti-plagiarism report
• Appreciated by thousands of clients. Check client reviews

How to write aims and objectives?

There is no particular way or standard to write the aims and objectives. Different researchers have different writing styles, and often it can be influenced by your research supervisor. However, you should follow certain basic principles while writing aims and objectives in a dissertation.

Writing the aim statement

The aim statement should cover the following essential elements.

• Why is the research necessary? (covers the underlying problem on which the study is to be conducted)
• What is the research about? (description of the research title)
• How are you going to conduct it? (a brief statement of intended research methods)

An appropriate aim clearly defines the research purpose without confusing the reader. If you struggle to explain your research and its importance in simpler terms, you should consider refining your research to clarify it further.

Writing objectives

The objectives describe how you would achieve your research aim. You can do this through the following steps,

• The first one to two objectives can be applied to the literature review . (Verbs to be used: investigate, examine, study)
• One objective can be applied to the methodology portion. (Verbs to be used: collect, select, demonstrate, estimate)
• Two to three objectives can cover the critical evaluation or discussion chapters (Verbs to be used: analyze, compare, evaluate)
• The final objective will cover the conclusion or recommendation portion. (Verbs to be used: conclude, recommend)

Instead of writing like a paragraph, the objectives should be written as a numbered list to give them more clarity.

How many aims and objectives should be there?

It depends upon the topic of your research and mainly upon your supervisor’s requirements. Generally, a dissertation has a single broad statement as the research aim. However, it is acceptable to include a main aim along with two to three subsidiary aims.

Similarly, the number of objectives should be realistic and sufficient to measure the progress regarding the achievement of the research aim. Their number can generally vary from three to six depending upon the aim.

Common mistakes to avoid while writing research aims and objectives

• Writing a broad research aim

Writing a broad research aim is a common mistake, and it often becomes difficult to achieve. It may create a problem when you are asked to prove how you have achieved your aims during your  viva defense . It would be best to narrow your study to a specific area in the early stages of the dissertation.

• Formulating overlapping research objectives

The objectives should be written such that they are measurable and distinct from each other. If they overlap, it makes it difficult to structure your dissertation properly in specific chapters.

• Setting unrealistic aims

Students often get over-ambitious while describing the research aim and face problems afterward in achieving those aims. You should avoid this mistake and be realistic about what you can achieve in the available time and resources.

Aims and objectives are the sections that require significant time and attention to avoid future hassles while conducting research and writing your dissertation.

Frequently Asked Questions

How to set dissertation aims and objectives.

To set dissertation aims and objectives, define your research goals clearly. Aims state what you want to achieve, while objectives outline specific, measurable steps to reach those goals. Ensure they align with your research question and contribute to your study’s significance.

You May Also Like

The best font for a dissertation is clear and readable, such as Times New Roman, Arial, or Calibri, typically in size 12 for the main text.

We have identified the most common dissertation questionnaire mistakes made by researchers that need to be avoided for good dissertations and thesis

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

• Aims and Objectives – A Guide for Academic Writing
• Doing a PhD

One of the most important aspects of a thesis, dissertation or research paper is the correct formulation of the aims and objectives. This is because your aims and objectives will establish the scope, depth and direction that your research will ultimately take. An effective set of aims and objectives will give your research focus and your reader clarity, with your aims indicating what is to be achieved, and your objectives indicating how it will be achieved.

Introduction

There is no getting away from the importance of the aims and objectives in determining the success of your research project. Unfortunately, however, it is an aspect that many students struggle with, and ultimately end up doing poorly. Given their importance, if you suspect that there is even the smallest possibility that you belong to this group of students, we strongly recommend you read this page in full.

This page describes what research aims and objectives are, how they differ from each other, how to write them correctly, and the common mistakes students make and how to avoid them. An example of a good aim and objectives from a past thesis has also been deconstructed to help your understanding.

What Are Aims and Objectives?

Research aims.

A research aim describes the main goal or the overarching purpose of your research project.

In doing so, it acts as a focal point for your research and provides your readers with clarity as to what your study is all about. Because of this, research aims are almost always located within its own subsection under the introduction section of a research document, regardless of whether it’s a thesis , a dissertation, or a research paper .

A research aim is usually formulated as a broad statement of the main goal of the research and can range in length from a single sentence to a short paragraph. Although the exact format may vary according to preference, they should all describe why your research is needed (i.e. the context), what it sets out to accomplish (the actual aim) and, briefly, how it intends to accomplish it (overview of your objectives).

To give an example, we have extracted the following research aim from a real PhD thesis:

Example of a Research Aim

The role of diametrical cup deformation as a factor to unsatisfactory implant performance has not been widely reported. The aim of this thesis was to gain an understanding of the diametrical deformation behaviour of acetabular cups and shells following impaction into the reamed acetabulum. The influence of a range of factors on deformation was investigated to ascertain if cup and shell deformation may be high enough to potentially contribute to early failure and high wear rates in metal-on-metal implants.

Note: Extracted with permission from thesis titled “T he Impact And Deformation Of Press-Fit Metal Acetabular Components ” produced by Dr H Hothi of previously Queen Mary University of London.

Research Objectives

Where a research aim specifies what your study will answer, research objectives specify how your study will answer it.

They divide your research aim into several smaller parts, each of which represents a key section of your research project. As a result, almost all research objectives take the form of a numbered list, with each item usually receiving its own chapter in a dissertation or thesis.

Following the example of the research aim shared above, here are it’s real research objectives as an example:

Example of a Research Objective

• Develop finite element models using explicit dynamics to mimic mallet blows during cup/shell insertion, initially using simplified experimentally validated foam models to represent the acetabulum.
• Investigate the number, velocity and position of impacts needed to insert a cup.
• Determine the relationship between the size of interference between the cup and cavity and deformation for different cup types.
• Investigate the influence of non-uniform cup support and varying the orientation of the component in the cavity on deformation.
• Examine the influence of errors during reaming of the acetabulum which introduce ovality to the cavity.
• Determine the relationship between changes in the geometry of the component and deformation for different cup designs.
• Develop three dimensional pelvis models with non-uniform bone material properties from a range of patients with varying bone quality.
• Use the key parameters that influence deformation, as identified in the foam models to determine the range of deformations that may occur clinically using the anatomic models and if these deformations are clinically significant.

It’s worth noting that researchers sometimes use research questions instead of research objectives, or in other cases both. From a high-level perspective, research questions and research objectives make the same statements, but just in different formats.

Taking the first three research objectives as an example, they can be restructured into research questions as follows:

Restructuring Research Objectives as Research Questions

• Can finite element models using simplified experimentally validated foam models to represent the acetabulum together with explicit dynamics be used to mimic mallet blows during cup/shell insertion?
• What is the number, velocity and position of impacts needed to insert a cup?
• What is the relationship between the size of interference between the cup and cavity and deformation for different cup types?

Difference Between Aims and Objectives

Hopefully the above explanations make clear the differences between aims and objectives, but to clarify:

• The research aim focus on what the research project is intended to achieve; research objectives focus on how the aim will be achieved.
• Research aims are relatively broad; research objectives are specific.
• Research aims focus on a project’s long-term outcomes; research objectives focus on its immediate, short-term outcomes.
• A research aim can be written in a single sentence or short paragraph; research objectives should be written as a numbered list.

How to Write Aims and Objectives

Before we discuss how to write a clear set of research aims and objectives, we should make it clear that there is no single way they must be written. Each researcher will approach their aims and objectives slightly differently, and often your supervisor will influence the formulation of yours on the basis of their own preferences.

Regardless, there are some basic principles that you should observe for good practice; these principles are described below.

Your aim should be made up of three parts that answer the below questions:

• Why is this research required?
• What is this research about?
• How are you going to do it?

The easiest way to achieve this would be to address each question in its own sentence, although it does not matter whether you combine them or write multiple sentences for each, the key is to address each one.

The first question, why , provides context to your research project, the second question, what , describes the aim of your research, and the last question, how , acts as an introduction to your objectives which will immediately follow.

Scroll through the image set below to see the ‘why, what and how’ associated with our research aim example.

Note: Your research aims need not be limited to one. Some individuals per to define one broad ‘overarching aim’ of a project and then adopt two or three specific research aims for their thesis or dissertation. Remember, however, that in order for your assessors to consider your research project complete, you will need to prove you have fulfilled all of the aims you set out to achieve. Therefore, while having more than one research aim is not necessarily disadvantageous, consider whether a single overarching one will do.

Research Objectives

Each of your research objectives should be SMART :

• Specific – is there any ambiguity in the action you are going to undertake, or is it focused and well-defined?
• Measurable – how will you measure progress and determine when you have achieved the action?
• Achievable – do you have the support, resources and facilities required to carry out the action?
• Relevant – is the action essential to the achievement of your research aim?
• Timebound – can you realistically complete the action in the available time alongside your other research tasks?

In addition to being SMART, your research objectives should start with a verb that helps communicate your intent. Common research verbs include:

Table of Research Verbs to Use in Aims and Objectives

Last, format your objectives into a numbered list. This is because when you write your thesis or dissertation, you will at times need to make reference to a specific research objective; structuring your research objectives in a numbered list will provide a clear way of doing this.

To bring all this together, let’s compare the first research objective in the previous example with the above guidance:

Checking Research Objective Example Against Recommended Approach

Research Objective:

1. Develop finite element models using explicit dynamics to mimic mallet blows during cup/shell insertion, initially using simplified experimentally validated foam models to represent the acetabulum.

Checking Against Recommended Approach:

Q: Is it specific? A: Yes, it is clear what the student intends to do (produce a finite element model), why they intend to do it (mimic cup/shell blows) and their parameters have been well-defined ( using simplified experimentally validated foam models to represent the acetabulum ).

Q: Is it measurable? A: Yes, it is clear that the research objective will be achieved once the finite element model is complete.

Q: Is it achievable? A: Yes, provided the student has access to a computer lab, modelling software and laboratory data.

Q: Is it relevant? A: Yes, mimicking impacts to a cup/shell is fundamental to the overall aim of understanding how they deform when impacted upon.

Q: Is it timebound? A: Yes, it is possible to create a limited-scope finite element model in a relatively short time, especially if you already have experience in modelling.

Q: Does it start with a verb? A: Yes, it starts with ‘develop’, which makes the intent of the objective immediately clear.

Q: Is it a numbered list? A: Yes, it is the first research objective in a list of eight.

Mistakes in Writing Research Aims and Objectives

1. making your research aim too broad.

Having a research aim too broad becomes very difficult to achieve. Normally, this occurs when a student develops their research aim before they have a good understanding of what they want to research. Remember that at the end of your project and during your viva defence , you will have to prove that you have achieved your research aims; if they are too broad, this will be an almost impossible task. In the early stages of your research project, your priority should be to narrow your study to a specific area. A good way to do this is to take the time to study existing literature, question their current approaches, findings and limitations, and consider whether there are any recurring gaps that could be investigated .

Note: Achieving a set of aims does not necessarily mean proving or disproving a theory or hypothesis, even if your research aim was to, but having done enough work to provide a useful and original insight into the principles that underlie your research aim.

2. Making Your Research Objectives Too Ambitious

Be realistic about what you can achieve in the time you have available. It is natural to want to set ambitious research objectives that require sophisticated data collection and analysis, but only completing this with six months before the end of your PhD registration period is not a worthwhile trade-off.

3. Formulating Repetitive Research Objectives

Each research objective should have its own purpose and distinct measurable outcome. To this effect, a common mistake is to form research objectives which have large amounts of overlap. This makes it difficult to determine when an objective is truly complete, and also presents challenges in estimating the duration of objectives when creating your project timeline. It also makes it difficult to structure your thesis into unique chapters, making it more challenging for you to write and for your audience to read.

Fortunately, this oversight can be easily avoided by using SMART objectives.

Hopefully, you now have a good idea of how to create an effective set of aims and objectives for your research project, whether it be a thesis, dissertation or research paper. While it may be tempting to dive directly into your research, spending time on getting your aims and objectives right will give your research clear direction. This won’t only reduce the likelihood of problems arising later down the line, but will also lead to a more thorough and coherent research project.

Finding a PhD has never been this easy – search for a PhD by keyword, location or academic area of interest.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Research Aims, Objectives & Questions

The “Golden Thread” Explained Simply (+ Examples)

By: David Phair (PhD) and Alexandra Shaeffer (PhD) | June 2022

The research aims , objectives and research questions (collectively called the “golden thread”) are arguably the most important thing you need to get right when you’re crafting a research proposal , dissertation or thesis . We receive questions almost every day about this “holy trinity” of research and there’s certainly a lot of confusion out there, so we’ve crafted this post to help you navigate your way through the fog.

Overview: The Golden Thread

• What is the golden thread
• What are research aims ( examples )
• What are research objectives ( examples )
• What are research questions ( examples )
• The importance of alignment in the golden thread

What is the “golden thread”?  

The golden thread simply refers to the collective research aims , research objectives , and research questions for any given project (i.e., a dissertation, thesis, or research paper ). These three elements are bundled together because it’s extremely important that they align with each other, and that the entire research project aligns with them.

Importantly, the golden thread needs to weave its way through the entirety of any research project , from start to end. In other words, it needs to be very clearly defined right at the beginning of the project (the topic ideation and proposal stage) and it needs to inform almost every decision throughout the rest of the project. For example, your research design and methodology will be heavily influenced by the golden thread (we’ll explain this in more detail later), as well as your literature review.

The research aims, objectives and research questions (the golden thread) define the focus and scope ( the delimitations ) of your research project. In other words, they help ringfence your dissertation or thesis to a relatively narrow domain, so that you can “go deep” and really dig into a specific problem or opportunity. They also help keep you on track , as they act as a litmus test for relevance. In other words, if you’re ever unsure whether to include something in your document, simply ask yourself the question, “does this contribute toward my research aims, objectives or questions?”. If it doesn’t, chances are you can drop it.

Alright, enough of the fluffy, conceptual stuff. Let’s get down to business and look at what exactly the research aims, objectives and questions are and outline a few examples to bring these concepts to life.

Research Aims: What are they?

Simply put, the research aim(s) is a statement that reflects the broad overarching goal (s) of the research project. Research aims are fairly high-level (low resolution) as they outline the general direction of the research and what it’s trying to achieve .

Research Aims: Examples  

True to the name, research aims usually start with the wording “this research aims to…”, “this research seeks to…”, and so on. For example:

“This research aims to explore employee experiences of digital transformation in retail HR.”   “This study sets out to assess the interaction between student support and self-care on well-being in engineering graduate students”  

As you can see, these research aims provide a high-level description of what the study is about and what it seeks to achieve. They’re not hyper-specific or action-oriented, but they’re clear about what the study’s focus is and what is being investigated.

Need a helping hand?

Research Objectives: What are they?

The research objectives take the research aims and make them more practical and actionable . In other words, the research objectives showcase the steps that the researcher will take to achieve the research aims.

The research objectives need to be far more specific (higher resolution) and actionable than the research aims. In fact, it’s always a good idea to craft your research objectives using the “SMART” criteria. In other words, they should be specific, measurable, achievable, relevant and time-bound”.

Research Objectives: Examples  

Let’s look at two examples of research objectives. We’ll stick with the topic and research aims we mentioned previously.  

For the digital transformation topic:

To observe the retail HR employees throughout the digital transformation. To assess employee perceptions of digital transformation in retail HR. To identify the barriers and facilitators of digital transformation in retail HR.

And for the student wellness topic:

To determine whether student self-care predicts the well-being score of engineering graduate students. To determine whether student support predicts the well-being score of engineering students. To assess the interaction between student self-care and student support when predicting well-being in engineering graduate students.

  As you can see, these research objectives clearly align with the previously mentioned research aims and effectively translate the low-resolution aims into (comparatively) higher-resolution objectives and action points . They give the research project a clear focus and present something that resembles a research-based “to-do” list.

Research Questions: What are they?

Finally, we arrive at the all-important research questions. The research questions are, as the name suggests, the key questions that your study will seek to answer . Simply put, they are the core purpose of your dissertation, thesis, or research project. You’ll present them at the beginning of your document (either in the introduction chapter or literature review chapter) and you’ll answer them at the end of your document (typically in the discussion and conclusion chapters).  

The research questions will be the driving force throughout the research process. For example, in the literature review chapter, you’ll assess the relevance of any given resource based on whether it helps you move towards answering your research questions. Similarly, your methodology and research design will be heavily influenced by the nature of your research questions. For instance, research questions that are exploratory in nature will usually make use of a qualitative approach, whereas questions that relate to measurement or relationship testing will make use of a quantitative approach.  

Let’s look at some examples of research questions to make this more tangible.

Research Questions: Examples  

Again, we’ll stick with the research aims and research objectives we mentioned previously.  

For the digital transformation topic (which would be qualitative in nature):

How do employees perceive digital transformation in retail HR? What are the barriers and facilitators of digital transformation in retail HR?  

And for the student wellness topic (which would be quantitative in nature):

Does student self-care predict the well-being scores of engineering graduate students? Does student support predict the well-being scores of engineering students? Do student self-care and student support interact when predicting well-being in engineering graduate students?  

You’ll probably notice that there’s quite a formulaic approach to this. In other words, the research questions are basically the research objectives “converted” into question format. While that is true most of the time, it’s not always the case. For example, the first research objective for the digital transformation topic was more or less a step on the path toward the other objectives, and as such, it didn’t warrant its own research question.  

So, don’t rush your research questions and sloppily reword your objectives as questions. Carefully think about what exactly you’re trying to achieve (i.e. your research aim) and the objectives you’ve set out, then craft a set of well-aligned research questions . Also, keep in mind that this can be a somewhat iterative process , where you go back and tweak research objectives and aims to ensure tight alignment throughout the golden thread.

The importance of strong alignment 

Alignment is the keyword here and we have to stress its importance . Simply put, you need to make sure that there is a very tight alignment between all three pieces of the golden thread. If your research aims and research questions don’t align, for example, your project will be pulling in different directions and will lack focus . This is a common problem students face and can cause many headaches (and tears), so be warned.

Take the time to carefully craft your research aims, objectives and research questions before you run off down the research path. Ideally, get your research supervisor/advisor to review and comment on your golden thread before you invest significant time into your project, and certainly before you start collecting data .  

Recap: The golden thread

In this post, we unpacked the golden thread of research, consisting of the research aims , research objectives and research questions . You can jump back to any section using the links below.

As always, feel free to leave a comment below – we always love to hear from you. Also, if you’re interested in 1-on-1 support, take a look at our private coaching service here.

Psst… there’s more (for free)

This post is part of our dissertation mini-course, which covers everything you need to get started with your dissertation, thesis or research project. 

You Might Also Like:

38 Comments

Thank you very much for your great effort put. As an Undergraduate taking Demographic Research & Methodology, I’ve been trying so hard to understand clearly what is a Research Question, Research Aim and the Objectives in a research and the relationship between them etc. But as for now I’m thankful that you’ve solved my problem.

Well appreciated. This has helped me greatly in doing my dissertation.

An so delighted with this wonderful information thank you a lot.

so impressive i have benefited a lot looking forward to learn more on research.

I am very happy to have carefully gone through this well researched article.

Infact,I used to be phobia about anything research, because of my poor understanding of the concepts.

Now,I get to know that my research question is the same as my research objective(s) rephrased in question format.

I please I would need a follow up on the subject,as I intends to join the team of researchers. Thanks once again.

Thanks so much. This was really helpful.

I know you pepole have tried to break things into more understandable and easy format. And God bless you. Keep it up

i found this document so useful towards my study in research methods. thanks so much.

This is my 2nd read topic in your course and I should commend the simplified explanations of each part. I’m beginning to understand and absorb the use of each part of a dissertation/thesis. I’ll keep on reading your free course and might be able to avail the training course! Kudos!

Thank you! Better put that my lecture and helped to easily understand the basics which I feel often get brushed over when beginning dissertation work.

This is quite helpful. I like how the Golden thread has been explained and the needed alignment.

This is quite helpful. I really appreciate!

The article made it simple for researcher students to differentiate between three concepts.

Very innovative and educational in approach to conducting research.

I am very impressed with all these terminology, as I am a fresh student for post graduate, I am highly guided and I promised to continue making consultation when the need arise. Thanks a lot.

A very helpful piece. thanks, I really appreciate it .

Very well explained, and it might be helpful to many people like me.

Wish i had found this (and other) resource(s) at the beginning of my PhD journey… not in my writing up year… 😩 Anyways… just a quick question as i’m having some issues ordering my “golden thread”…. does it matter in what order you mention them? i.e., is it always first aims, then objectives, and finally the questions? or can you first mention the research questions and then the aims and objectives?

Thank you for a very simple explanation that builds upon the concepts in a very logical manner. Just prior to this, I read the research hypothesis article, which was equally very good. This met my primary objective.

My secondary objective was to understand the difference between research questions and research hypothesis, and in which context to use which one. However, I am still not clear on this. Can you kindly please guide?

In research, a research question is a clear and specific inquiry that the researcher wants to answer, while a research hypothesis is a tentative statement or prediction about the relationship between variables or the expected outcome of the study. Research questions are broader and guide the overall study, while hypotheses are specific and testable statements used in quantitative research. Research questions identify the problem, while hypotheses provide a focus for testing in the study.

Exactly what I need in this research journey, I look forward to more of your coaching videos.

This helped a lot. Thanks so much for the effort put into explaining it.

What data source in writing dissertation/Thesis requires?

What is data source covers when writing dessertation/thesis

This is quite useful thanks

I’m excited and thankful. I got so much value which will help me progress in my thesis.

where are the locations of the reserch statement, research objective and research question in a reserach paper? Can you write an ouline that defines their places in the researh paper?

Very helpful and important tips on Aims, Objectives and Questions.

Thank you so much for making research aim, research objectives and research question so clear. This will be helpful to me as i continue with my thesis.

Thanks much for this content. I learned a lot. And I am inspired to learn more. I am still struggling with my preparation for dissertation outline/proposal. But I consistently follow contents and tutorials and the new FB of GRAD Coach. Hope to really become confident in writing my dissertation and successfully defend it.

As a researcher and lecturer, I find splitting research goals into research aims, objectives, and questions is unnecessarily bureaucratic and confusing for students. For most biomedical research projects, including ‘real research’, 1-3 research questions will suffice (numbers may differ by discipline).

Awesome! Very important resources and presented in an informative way to easily understand the golden thread. Indeed, thank you so much.

Well explained

The blog article on research aims, objectives, and questions by Grad Coach is a clear and insightful guide that aligns with my experiences in academic research. The article effectively breaks down the often complex concepts of research aims and objectives, providing a straightforward and accessible explanation. Drawing from my own research endeavors, I appreciate the practical tips offered, such as the need for specificity and clarity when formulating research questions. The article serves as a valuable resource for students and researchers, offering a concise roadmap for crafting well-defined research goals and objectives. Whether you’re a novice or an experienced researcher, this article provides practical insights that contribute to the foundational aspects of a successful research endeavor.

A great thanks for you. it is really amazing explanation. I grasp a lot and one step up to research knowledge.

I really found these tips helpful. Thank you very much Grad Coach.

I found this article helpful. Thanks for sharing this.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Research Voyage

Research Tips and Infromation

How to Write Aims and Objectives for your Dissertation or Thesis?

Introduction

Understanding aims and objectives, crafting aims, break it down into objectives, developing specific objectives, align with research questions, consider feasibility, review and refine, seek feedback, documenting aims and objectives.

In a PhD or Post Graduate dissertation, the aims and objectives play a crucial role in shaping the research process and ensuring focus. They provide a clear roadmap for your study and serve as the guiding principles that steer your research in the right direction.

Aims represent the broader purpose or the overarching goal of your research. They define what you want to achieve with your dissertation. For example, let’s say you’re conducting a study on renewable energy sources. Your aim could be to analyze the economic viability and environmental impact of solar energy adoption in residential areas.

Objectives, on the other hand, break down the aim into specific, measurable, and achievable targets that help you accomplish your research goal. They outline the specific steps or tasks you need to undertake to fulfill the aim. Continuing with the previous example, some objectives could be:

• Evaluate the current state of solar energy technologies and their efficiency.
• Assess the economic costs and benefits associated with the installation of solar panels in residential areas.
• Analyze the environmental impact of solar energy adoption in terms of carbon emissions reduction.
• Investigate the potential barriers to the widespread adoption of solar energy in residential communities.
• Develop recommendations for policymakers and stakeholders to promote the use of solar energy in residential areas.

These objectives, when combined, address different aspects related to the aim of analyzing the economic viability and environmental impact of solar energy adoption. Each objective guides a specific aspect of the research and contributes to answering the research questions.

By having clear aims and objectives, you establish a solid framework for your study. They help you stay focused on the main purpose of your research and prevent you from getting sidetracked or overwhelmed by tangential topics. Moreover, they provide clarity to both you and your readers, ensuring that your research remains coherent and well-structured.

In summary, clear aims and objectives are instrumental in guiding the research process of a PhD dissertation. They provide a roadmap, define the research goal, and break it down into specific targets. Through the example provided, it is evident how aims and objectives bring focus to a study on renewable energy sources and solar energy adoption in residential areas.

If you are in paucity of time, not confident of your writing skills and in a hurry to complete the writing task then you can think of hiring a research consultant that solves all your problems. Please visit my article on Hiring a Research consultant for your PhD tasks for further details.

Aims and objectives play a crucial role in guiding research projects. It’s important to define these terms and differentiate between them to ensure a clear focus in your work.

Aims represent the broader purpose or goal of your study. They define what you aim to achieve through your research project. Aims provide the overarching context and direction for your work, guiding the selection of topics, methodologies, and outcomes.

Example: Suppose you’re working on a PhD dissertation in computer science with a focus on natural language processing. Your aim could be: “To develop an efficient and accurate algorithm for sentiment analysis in social media data.”

In this example, the aim highlights the objective of creating an algorithm specifically for sentiment analysis in social media data, indicating the main objective of your research.

Objectives break down the aim into specific, measurable, and achievable targets that contribute to achieving the overall goal. They are more focused and concrete than aims, outlining the steps or tasks necessary to fulfill the aim. Objectives serve as the building blocks of your research, guiding the implementation and evaluation of your work.

Example: Continuing with the previous aim, let’s define some specific objectives:

• Collect and preprocess a large dataset of social media posts for sentiment analysis.
• Explore and compare existing sentiment analysis techniques to identify their limitations and strengths.
• Design and develop a novel algorithm that addresses the limitations of current approaches.
• Implement the algorithm and evaluate its performance on the collected dataset.
• Analyze the results and compare them with existing state-of-the-art sentiment analysis methods.

These objectives, when combined, address different aspects necessary to fulfill the aim of developing an efficient and accurate sentiment analysis algorithm for social media data. Each objective represents a specific task or milestone that contributes to the overall research goal.

The relationship between aims and objectives is critical in driving research. Objectives are derived from the aim and provide the means to accomplish it. They act as stepping stones, guiding the researcher towards achieving the broader aim.

In summary, aims provide the broader context and goal, while objectives break down the aim into specific tasks and milestones. Together, they ensure focus and direction in your research, guiding the selection of topics, methodologies, and outcomes. The objectives serve as the means to achieve the overall aim, highlighting the relationship between aims and objectives in driving research in the computer science domain.

Formulating the overarching aim of your research is a crucial step in defining the direction and purpose of your dissertation. The aim represents the primary goal or intention of your study, and crafting it effectively is essential for setting the foundation of your research.

Research Topic: Enhancing cybersecurity in cloud computing environments.

In this example, the aim focuses on improving cybersecurity in the context of cloud computing. The aim should be formulated in a concise and focused manner that aligns with the research topic. Here’s an example of how the aim could be crafted effectively:

Aim: Develop an efficient and robust security framework for ensuring data confidentiality, integrity, and availability in cloud computing environments.

The above aim encapsulates the overall goal of the research, which is to develop a security framework for enhancing cybersecurity in cloud computing. It clearly states the intention to address key aspects such as data confidentiality, integrity, and availability. The aim is concise, specific, and directly aligned with the research topic.

The significance of a well-defined aim cannot be overstated. It serves as a guiding beacon throughout your research journey, providing a clear direction and purpose. A well-crafted aim helps you stay focused and ensures that your efforts are aligned with the research’s core objectives. It also helps you communicate the purpose of your study to others, including your advisor, peers, and potential readers of your dissertation.

Additionally, an effective aim sets the stage for the subsequent development of specific objectives and research questions. It serves as a foundation upon which you can break down the aim into smaller, manageable objectives that contribute to achieving the overall research goal. Each objective should align with the aim and work together harmoniously to address the research questions and gaps in the field.

Moreover, a concise and aligned aim allows readers to quickly grasp the essence of your research. It provides them with a clear understanding of the research’s scope and purpose. By stating the aim concisely and aligning it with the research topic, you demonstrate your ability to articulate the core objective of your study in a succinct manner.

In summary, crafting effective aims involves formulating the overarching goal or intention of your research in a concise and focused manner. A well-defined aim sets the direction for your dissertation, guiding your efforts and ensuring alignment with the research topic. It serves as a foundation for the development of specific objectives and research questions. By presenting a clear and aligned aim, you convey the purpose of your study to others and demonstrate your ability to articulate the core objective of your research.

After defining the aim of your research, it’s important to break it down into smaller, manageable objectives. These objectives should address key research questions or subtopics that are necessary to achieve the overall aim. Additionally, objectives should be specific, measurable, and utilize action verbs to describe the intended actions or achievements.

Example: Suppose the aim of your research is to develop a recommendation system for an e-commerce platform. Here are some examples of specific objectives:

• Action Verbs: Analyze, Identify
• Description: Gather and analyze user preferences and historical data from the e-commerce platform to identify patterns in user behavior and item preferences.
• Action Verbs: Design, Implement
• Description: Develop and implement collaborative filtering algorithms, such as user-based or item-based methods, to generate personalized recommendations based on user similarities or item similarities.
• Action Verbs: Incorporate
• Description: Integrate machine learning techniques, such as matrix factorization or deep learning models, into the recommendation system to improve the accuracy and personalization of the recommendations.
• Action Verbs: Evaluate
• Description: Conduct experiments and evaluate the performance of the recommendation system using appropriate evaluation metrics, such as precision, recall, or mean average precision, to assess the effectiveness and efficiency of the system.
• Action Verbs: Optimize
• Description: Identify and implement optimization techniques, such as parallel computing or distributed systems, to enhance the scalability and efficiency of the recommendation algorithm, allowing it to handle large-scale datasets and real-time recommendations.

By breaking down the aim into these specific objectives, you address key components of developing a recommendation system, such as data analysis, algorithm design, evaluation, and optimization. Each objective represents a distinct step that contributes to achieving the overall aim.

Importantly, these objectives are specific and measurable, allowing you to determine whether you have successfully achieved them. For instance, you can measure the accuracy of the recommendation system, evaluate its performance against baseline models, or assess its scalability in terms of handling large datasets.

In summary, when conducting research, breaking down the aim into specific objectives helps in managing the workload and providing a clear roadmap for your research. These objectives should address key research questions or subtopics, be specific and measurable, and use action verbs to describe the intended actions or achievements. By following this approach, you can ensure a systematic and focused research process.

To develop specific objectives for your research, you need to break down the overarching aim into smaller, measurable objectives. These objectives should be clear, specific, and actionable, providing a roadmap for your research and guiding the entire research process.

Aim: Develop a machine learning-based system for automated sentiment analysis in social media data.

Objective 1: Conduct a comprehensive literature review on existing sentiment analysis techniques and methodologies.

• Breakdown: This objective focuses on reviewing the literature in the field of sentiment analysis, specifically examining the various techniques and methodologies that have been developed and applied. It involves gathering and analyzing research papers, books, and other relevant sources to gain a comprehensive understanding of the existing knowledge in sentiment analysis.

Objective 2: Collect a large dataset of social media posts for training and evaluation.

• Breakdown: This objective entails the collection of a substantial amount of social media data that will be used as input for training and evaluating the machine learning model. It involves designing data collection mechanisms, such as web scraping or utilizing available APIs, to gather a diverse set of social media posts from platforms like Twitter or Facebook.

Objective 3: Design and implement a machine learning algorithm capable of accurately detecting sentiment polarity in social media text.

• Breakdown: This objective focuses on the development of a machine learning algorithm tailored for sentiment analysis in social media text. It involves designing and implementing the necessary algorithms, selecting appropriate feature representations, and training a model to accurately classify sentiment polarity (positive, negative, or neutral) of social media posts.

Objective 4: Evaluate the performance of the developed sentiment analysis system against benchmark datasets and compare it with existing state-of-the-art approaches.

• Breakdown: This objective involves assessing the performance of the developed sentiment analysis system by evaluating it against established benchmark datasets. It requires selecting appropriate evaluation metrics and comparing the system’s performance with existing state-of-the-art approaches in sentiment analysis, such as accuracy, precision, recall, or F1 score.

The importance of clear, specific objectives cannot be overstated. These objectives provide a clear roadmap and direction for your research, guiding your efforts and ensuring that you stay on track. They help you structure your research activities, allocate resources effectively, and measure progress along the way.

Using action verbs to articulate objectives effectively is another crucial aspect. Action verbs convey specific actions or achievements that need to be accomplished. They provide clarity and precision, leaving no room for ambiguity. For example:

By using action verbs, you explicitly state what needs to be done or achieved in each objective, making it easier to track progress and assess the completion of objectives.

In summary, developing specific objectives involves breaking down the overarching aim into smaller, measurable objectives. Clear and specific objectives provide a roadmap for your research and guide the entire research process. By using action verbs, you articulate objectives effectively, leaving no room for ambiguity. These objectives help structure your research activities, allocate resources effectively, and measure progress, ultimately leading to the successful completion of your research.

When formulating objectives for your research, it is essential to ensure that they align with the research questions you have formulated. Each objective should contribute to addressing or answering a specific research question, creating a cohesive and focused research framework.

Example: Suppose your research in computer science focuses on developing an automated system for detecting and preventing cybersecurity threats. Here are examples of objectives aligned with research questions:

Research Question: How can machine learning algorithms be utilized to detect and mitigate cybersecurity threats effectively?

Objective 1: Evaluate and compare different machine learning algorithms for cybersecurity threat detection.

• Description: Explore and assess various machine learning algorithms, such as decision trees, random forests, or neural networks, to identify the most suitable approach for detecting cybersecurity threats accurately and efficiently.

Objective 2: Develop a dataset representative of diverse cybersecurity threats.

• Description: Create a comprehensive dataset containing various types of cybersecurity threats, including malware, phishing attacks, and network intrusions, to train and evaluate the machine learning models effectively.

Research Question: What are the key challenges and vulnerabilities in existing cybersecurity systems that need to be addressed?

Objective 3: Conduct a systematic analysis of existing cybersecurity systems and identify vulnerabilities.

• Description: Analyze and evaluate existing cybersecurity systems, such as intrusion detection systems or antivirus software, to identify vulnerabilities, weaknesses, and potential areas of improvement that can inform the development of a more robust automated system.

Objective 4: Propose novel techniques to enhance the resilience of the cybersecurity system.

• Description: Develop innovative approaches, such as anomaly detection algorithms or behavior-based analysis techniques, to enhance the resilience of the automated cybersecurity system and address the identified vulnerabilities.

By aligning the objectives with the research questions, you ensure that each objective contributes to addressing a specific aspect of your research. For example, Objective 1 directly addresses the research question regarding the utilization of machine learning algorithms for cybersecurity threat detection. Objective 3 focuses on analyzing existing systems to identify vulnerabilities, which is in line with the question about challenges and vulnerabilities in existing cybersecurity systems.

The alignment between research questions and objectives helps maintain a clear focus on the research objectives and ensures that your efforts are directed towards addressing the research questions. It also enhances the coherence of your research, as each objective becomes a stepping stone towards answering the research questions and achieving the overall aim of your study.

In summary, aligning objectives with research questions is crucial in research. It ensures that each objective contributes to answering or addressing a specific research question, creating a logical and cohesive framework for your study. By establishing this alignment, you can maintain a clear focus on the research objectives and make meaningful contributions to the field.

When setting objectives for your research, it is important to consider their feasibility. Feasibility refers to the realistic achievability of your objectives within the scope of your PhD research, taking into account available resources, time constraints, and other practical limitations.

Example: Suppose your research focuses on developing a new algorithm for real-time video processing and analysis. Here are examples of objectives that consider feasibility:

Objective 1: Implement the real-time video processing algorithm on a high-performance computing cluster.

• Feasibility Considerations: Before setting this objective, assess whether you have access to a high-performance computing cluster and the necessary resources (e.g., hardware, software, computational power) to support the implementation and testing of the algorithm. If such resources are available within your research environment or institution, this objective is feasible.

Objective 2: Collect and annotate a large-scale video dataset for algorithm training and evaluation.

• Feasibility Considerations: Consider the practical aspects of collecting and annotating a large-scale video dataset. Evaluate the time, manpower, and equipment required for this task. Assess whether you have access to the necessary resources (e.g., cameras, storage, annotation tools) and the capability to manage and process such a dataset. If these resources and capabilities are available within your research context, this objective is feasible.

Objective 3: Collaborate with industry partners to obtain real-world video data for testing and validation.

• Feasibility Considerations: Evaluate the feasibility of establishing collaborations with industry partners to obtain real-world video data. Consider factors such as data sharing agreements, legal and privacy considerations, and the willingness of industry partners to provide access to their data. Assess the potential challenges and limitations that may arise during this collaboration process. If such collaborations are feasible and can be established within the constraints of your research, this objective is feasible.

By considering feasibility, you ensure that your objectives are realistically achievable within the resources, time, and other constraints of your PhD research. It helps you avoid setting objectives that are too ambitious or beyond the scope of what you can reasonably accomplish.

Feasibility assessment is crucial in ensuring the successful completion of your research project. It allows you to allocate resources effectively, manage your time, and avoid potential pitfalls or setbacks that could hinder your progress. By setting feasible objectives, you can maintain a practical and manageable research plan that is more likely to lead to meaningful outcomes within the given constraints.

In summary, considering feasibility when setting objectives in computer science research is essential. Assess the available resources, time constraints, and practical limitations to ensure that your objectives are realistically achievable within the scope of your PhD research. By doing so, you can plan and execute your research effectively, making the most of the resources at your disposal and increasing the likelihood of successful outcomes.

Once you have defined your aims and objectives for your research, it’s important to review and refine them to ensure clarity, coherence, and logical flow. This step allows you to make any necessary revisions to ensure that your aims and objectives accurately reflect the scope and purpose of your research.

Example: Suppose your research in computer science focuses on developing a mobile application for enhancing cybersecurity awareness among smartphone users. Here’s an example of reviewing and refining aims and objectives:

Aim: Develop a mobile application for enhancing cybersecurity awareness among smartphone users.

Objective 1: Conduct a comprehensive literature review on cybersecurity awareness strategies and mobile application design principles.

• Review and Refinement: Upon review, you find that the objective is clear and aligned with the aim. However, you decide to refine it to include specific aspects you intend to cover in the literature review, such as user education techniques, persuasive design elements, and existing cybersecurity awareness mobile applications.

Objective 2: Design and develop a user-friendly mobile application prototype that delivers educational content and interactive features.

• Review and Refinement: During the review, you realize that the objective lacks specificity regarding the educational content and interactive features. You refine it to explicitly mention the inclusion of topics like phishing prevention, password management, and interactive quizzes to reinforce learning.

Objective 3: Conduct usability testing and collect feedback from potential users to evaluate the effectiveness of the mobile application.

• Review and Refinement: While reviewing, you realize that the objective could benefit from additional information. You refine it to include details such as the target user group (e.g., smartphone users aged 18-35), the number of participants you plan to involve in the usability testing, and the specific metrics you will use to evaluate the effectiveness of the application.

By reviewing and refining your aims and objectives, you ensure that they accurately capture the scope and purpose of your research. It helps you identify any gaps, ambiguities, or areas that need further clarification. Through this process, you can enhance the clarity, coherence, and logical flow of your aims and objectives, making them more robust and aligned with your research goals.

Additionally, reviewing and refining your aims and objectives allows you to align them with the current state of knowledge in the field. As you conduct literature reviews and gain more insights into existing research, you may discover the need to make adjustments to your aims and objectives to reflect the most relevant and up-to-date information.

In summary, reviewing and refining aims and objectives in research is essential to ensure clarity, coherence, and logical flow. By carefully reviewing each aim and objective, you can identify areas for improvement, refine them to include specific details, and align them with the current state of knowledge in the field. This process enhances the accuracy and effectiveness of your aims and objectives, providing a strong foundation for your research.

Once you have developed your aims and objectives for your research, it is important to seek feedback from your supervisor or peers. Sharing your aims and objectives with others allows you to gather valuable insights, suggestions, and perspectives that can help refine and improve your objectives, ensuring they are appropriate and aligned with your research.

Imagine you have formulated the following objectives for your computer science research on developing an intelligent tutoring system:

Objective 1: Conduct a literature review on existing intelligent tutoring systems and their effectiveness in enhancing student learning outcomes.

Objective 2: Design and develop an adaptive learning algorithm to personalize the tutoring experience based on individual student needs.

Objective 3: Implement a user-friendly interface for the intelligent tutoring system that provides an intuitive and engaging learning environment.

Objective 4: Evaluate the effectiveness of the developed intelligent tutoring system through a series of user studies and compare it with traditional tutoring methods.

At this stage, it would be beneficial to share your aims and objectives with your supervisor or peers to receive feedback. They can provide valuable insights and suggestions to help you refine and improve your objectives. For example:

• Your supervisor may suggest including a specific research question to further clarify the focus of Objective 1, such as “What are the key features and techniques used in successful intelligent tutoring systems?”
• Peers may provide feedback on the clarity and specificity of Objective 2, suggesting adding details on the specific adaptability mechanisms to be incorporated.
• Your supervisor might suggest considering the inclusion of usability testing as part of Objective 3 to ensure the interface meets the needs and preferences of the target users.
• Peers may offer suggestions on additional evaluation metrics or experimental setups to strengthen Objective 4 and provide more robust comparisons.

By seeking feedback, you open yourself up to constructive criticism and valuable perspectives that can help enhance the quality and effectiveness of your aims and objectives. Feedback from experienced researchers or knowledgeable peers can help you identify any potential gaps or weaknesses in your objectives and provide suggestions for improvement.

Remember that feedback is an iterative process, and it is important to carefully consider the suggestions provided while also critically evaluating them in the context of your research. Incorporating constructive feedback will help you refine your aims and objectives, ensuring they are robust, relevant, and aligned with your research goals.

In summary, seeking feedback on your aims and objectives is a valuable step in the process of developing your research. Sharing your objectives with your supervisor or peers allows you to gather insights, suggestions, and perspectives that can help refine and improve your objectives. Feedback helps ensure that your objectives are appropriate, clear, and aligned with your research goals, ultimately strengthening the overall quality of your research.

When writing your dissertation, it is crucial to properly document and present your aims and objectives. The placement and presentation of aims and objectives play a significant role in providing readers with a clear understanding of the research’s purpose and direction.

Placement: The aims and objectives of your research should be presented early on in your dissertation, typically within the introduction chapter. This allows readers to grasp the overall scope and intent of your research from the beginning. Placing them in the introduction helps set the context and provides a roadmap for the rest of the dissertation.

Presentation: When presenting aims and objectives, it is important to clearly distinguish between the two and articulate their role in driving the research. Here’s an example of how you can document aims and objectives:

Aims: Start by presenting the overarching aim of your research, which represents the primary goal or intention of your study. It should be a concise statement that captures the essence of your research focus.

For example:

Aim: The aim of this research is to develop a machine learning-based system for automated sentiment analysis in social media data.

Objectives: Following the aim, present a list of specific objectives that outline the key steps or milestones required to achieve the aim. Each objective should be clear, specific, and measurable. Here’s an example:

Objectives:

• Analyze existing sentiment analysis techniques and methodologies in the literature to identify their limitations and challenges.
• Collect and preprocess a large dataset of social media posts to serve as the training and evaluation data for the sentiment analysis system.
• Design and implement a machine learning algorithm capable of accurately detecting sentiment polarity in social media text.
• Evaluate the performance of the developed sentiment analysis system against existing state-of-the-art approaches, using appropriate evaluation metrics.
• Optimize the system for scalability and efficiency, allowing it to handle large volumes of real-time social media data.

By clearly documenting the aims and objectives in your dissertation, you provide readers with a clear understanding of the purpose and direction of your research. This enables them to follow your thought process and evaluate the relevance and significance of your study. Aims and objectives serve as guideposts that help readers navigate through your dissertation and understand the specific research questions you seek to address.

Moreover, the well-documented aims and objectives help you maintain focus throughout your research journey and provide a framework for organizing your dissertation. They establish the foundation upon which your methodology, analysis, and conclusions are built.

In summary, when documenting aims and objectives in a dissertation, it is important to place them in the introduction chapter and clearly present their role in guiding the research. Aims and objectives should be distinct, with the aim of capturing the overarching goal and the objectives outlining the specific steps or milestones to achieve it. By effectively documenting aims and objectives, you provide readers with a clear understanding of the research’s purpose and direction, facilitating their engagement with your work.

Crafting clear and well-defined aims and objectives is a critical aspect of writing a PhD or Post Graduate dissertation. These aims and objectives provide a solid foundation for your research, guiding your efforts and ensuring a focused and coherent study. Through this discussion, we have explored the importance of aims and objectives in a PhD dissertation and how they contribute to the research process.

Upcoming Events

• Visit the Upcoming International Conferences at Exotic Travel Destinations with Travel Plan
• Visit for  Research Internships Worldwide

Recent Posts

• PhD or Industry Job? A Comprehensive Career Guide
• Post Doc Positions in India
• 04 Reasons for Outsourcing Academic Conference Management
• How to Put Research Grants on Your CV ?
• How to Request for Journal Publishing Charge (APC) Discount or Waiver?
• All Blog Posts
• Research Career
• Research Conference
• Research Internship
• Research Journal
• Research Tools
• Uncategorized
• Research Conferences
• Research Journals
• Research Grants
• Internships
• Research Internships
• Email Templates
• Conferences
• Blog Partners
• Privacy Policy

Copyright © 2024 Research Voyage

Design by ThemesDNA.com

• Link to facebook
• Link to linkedin
• Link to twitter
• Link to youtube
• Writing Tips

How to Write Research Objectives

3-minute read

• 22nd November 2021

Writing a research paper, thesis, or dissertation ? If so, you’ll want to state your research objectives in the introduction of your paper to make it clear to your readers what you’re trying to accomplish. But how do you write effective research objectives? In this post, we’ll look at two key topics to help you do this:

• How to use your research aims as a basis for developing objectives.
• How to use SMART criteria to refine your research objectives.

For more advice on how to write strong research objectives, see below.

Research Aims and Objectives

There is an important difference between research aims and research objectives:

• A research aim defines the main purpose of your research. As such, you can think of your research aim as answering the question “What are you doing?”
• Research objectives (as most studies will have more than one) are the steps you will take to fulfil your aims. As such, your objectives should answer the question “How are you conducting your research?”

For instance, an example research aim could be:

This study will investigate the link between dehydration and the incidence of urinary tract infections (UTIs) in intensive care patients in Australia.

To develop a set of research objectives, you would then break down the various steps involved in meeting said aim. For example:

This study will investigate the link between dehydration and the incidence of urinary tract infections (UTIs) in intensive care patients in Australia. To achieve this, the study objectives w ill include:

• Replicat ing a small Singaporean study into the role of dehydration in UTIs in hospital patients (Sepe, 2018) in a larger Australian cohort.
• Trialing the use of intravenous fluids for intensive care patients to prevent dehydration.
• Assessing the relationship between the age of patients and quantities of intravenous fluids needed to counter dehydration.

Find this useful?

Subscribe to our newsletter and get writing tips from our editors straight to your inbox.

Note that the objectives don’t go into any great detail here. The key is to briefly summarize each component of your study. You can save details for how you will conduct the research for the methodology section of your paper.

Make Your Research Objectives SMART

A great way to refine your research objectives is to use SMART criteria . Borrowed from the world of project management, there are many versions of this system. However, we’re going to focus on developing specific, measurable, achievable, relevant, and timebound objectives.

In other words, a good research objective should be all of the following:

• S pecific – Is the objective clear and well-defined?
• M easurable – How will you know when the objective has been achieved? Is there a way to measure the thing you’re seeking to do?
• A chievable – Do you have the support and resources necessary to undertake this action? Are you being overly ambitious with this objective?
• R elevant – Is this objective vital for fulfilling your research aim?
• T imebound – Can this action be realistically undertaken in the time you have?

If you follow this system, your research objectives will be much stronger.

Expert Research Proofreading

Whatever your research aims and objectives, make sure to have your academic writing proofread by the experts!

Our academic editors can help you with research papers and proposals , as well as any other scholarly document you need checking. And this will help to ensure that your academic writing is always clear, concise, and precise.

Submit a free sample document today to trial our services and find out more.

Share this article:

Post A New Comment

Got content that needs a quick turnaround? Let us polish your work. Explore our editorial business services.

2-minute read

How to Cite the CDC in APA

If you’re writing about health issues, you might need to reference the Centers for Disease...

5-minute read

Six Product Description Generator Tools for Your Product Copy

Introduction If you’re involved with ecommerce, you’re likely familiar with the often painstaking process of...

What Is a Content Editor?

Are you interested in learning more about the role of a content editor and the...

4-minute read

The Benefits of Using an Online Proofreading Service

Proofreading is important to ensure your writing is clear and concise for your readers. Whether...

6 Online AI Presentation Maker Tools

Creating presentations can be time-consuming and frustrating. Trying to construct a visually appealing and informative...

What Is Market Research?

No matter your industry, conducting market research helps you keep up to date with shifting...

Make sure your writing is the best it can be with our expert English proofreading and editing.

Frequently asked questions

How do i write a research objective.

Once you’ve decided on your research objectives , you need to explain them in your paper, at the end of your problem statement.

Keep your research objectives clear and concise, and use appropriate verbs to accurately convey the work that you will carry out for each one.

I will compare …

Ask our team

Want to contact us directly? No problem. We are always here for you.

• Chat with us
• Email [email protected]
• Call +44 (0)20 3917 4242
• WhatsApp +31 20 261 6040

Our support team is here to help you daily via chat, WhatsApp, email, or phone between 9:00 a.m. to 11:00 p.m. CET.

Our APA experts default to APA 7 for editing and formatting. For the Citation Editing Service you are able to choose between APA 6 and 7.

Yes, if your document is longer than 20,000 words, you will get a sample of approximately 2,000 words. This sample edit gives you a first impression of the editor’s editing style and a chance to ask questions and give feedback.

How does the sample edit work?

You will receive the sample edit within 24 hours after placing your order. You then have 24 hours to let us know if you’re happy with the sample or if there’s something you would like the editor to do differently.

Read more about how the sample edit works

Yes, you can upload your document in sections.

We try our best to ensure that the same editor checks all the different sections of your document. When you upload a new file, our system recognizes you as a returning customer, and we immediately contact the editor who helped you before.

However, we cannot guarantee that the same editor will be available. Your chances are higher if

• You send us your text as soon as possible and
• You can be flexible about the deadline.

Please note that the shorter your deadline is, the lower the chance that your previous editor is not available.

If your previous editor isn’t available, then we will inform you immediately and look for another qualified editor. Fear not! Every Scribbr editor follows the  Scribbr Improvement Model  and will deliver high-quality work.

Yes, our editors also work during the weekends and holidays.

Because we have many editors available, we can check your document 24 hours per day and 7 days per week, all year round.

If you choose a 72 hour deadline and upload your document on a Thursday evening, you’ll have your thesis back by Sunday evening!

Yes! Our editors are all native speakers, and they have lots of experience editing texts written by ESL students. They will make sure your grammar is perfect and point out any sentences that are difficult to understand. They’ll also notice your most common mistakes, and give you personal feedback to improve your writing in English.

Every Scribbr order comes with our award-winning Proofreading & Editing service , which combines two important stages of the revision process.

For a more comprehensive edit, you can add a Structure Check or Clarity Check to your order. With these building blocks, you can customize the kind of feedback you receive.

You might be familiar with a different set of editing terms. To help you understand what you can expect at Scribbr, we created this table:

View an example

When you place an order, you can specify your field of study and we’ll match you with an editor who has familiarity with this area.

However, our editors are language specialists, not academic experts in your field. Your editor’s job is not to comment on the content of your dissertation, but to improve your language and help you express your ideas as clearly and fluently as possible.

This means that your editor will understand your text well enough to give feedback on its clarity, logic and structure, but not on the accuracy or originality of its content.

Good academic writing should be understandable to a non-expert reader, and we believe that academic editing is a discipline in itself. The research, ideas and arguments are all yours – we’re here to make sure they shine!

After your document has been edited, you will receive an email with a link to download the document.

The editor has made changes to your document using ‘Track Changes’ in Word. This means that you only have to accept or ignore the changes that are made in the text one by one.

It is also possible to accept all changes at once. However, we strongly advise you not to do so for the following reasons:

• You can learn a lot by looking at the mistakes you made.
• The editors don’t only change the text – they also place comments when sentences or sometimes even entire paragraphs are unclear. You should read through these comments and take into account your editor’s tips and suggestions.
• With a final read-through, you can make sure you’re 100% happy with your text before you submit!

You choose the turnaround time when ordering. We can return your dissertation within 24 hours , 3 days or 1 week . These timescales include weekends and holidays. As soon as you’ve paid, the deadline is set, and we guarantee to meet it! We’ll notify you by text and email when your editor has completed the job.

Very large orders might not be possible to complete in 24 hours. On average, our editors can complete around 13,000 words in a day while maintaining our high quality standards. If your order is longer than this and urgent, contact us to discuss possibilities.

Always leave yourself enough time to check through the document and accept the changes before your submission deadline.

Scribbr is specialised in editing study related documents. We check:

• Graduation projects
• Dissertations
• Admissions essays
• College essays
• Application essays
• Personal statements
• Process reports
• Reflections
• Internship reports
• Academic papers
• Research proposals
• Prospectuses

Calculate the costs

The fastest turnaround time is 24 hours.

You can upload your document at any time and choose between three deadlines:

At Scribbr, we promise to make every customer 100% happy with the service we offer. Our philosophy: Your complaint is always justified – no denial, no doubts.

Our customer support team is here to find the solution that helps you the most, whether that’s a free new edit or a refund for the service.

Yes, in the order process you can indicate your preference for American, British, or Australian English .

If you don’t choose one, your editor will follow the style of English you currently use. If your editor has any questions about this, we will contact you.

A Guide to Writing Research Objectives and Aims

• Post author: Research Zone
• Post published: September 6, 2021
• Post category: Academic Advice / Writing Thesis
• Post comments: 1 Comment

Introduction

In determining the success of your research project, it is crucial to understand your research objectives and aim. However, it is, unfortunately, an aspect that many students struggle with, resulting in poor performance. As a result of their importance, if you suspect even the slightest possibility that you belong to this group of students, we strongly recommend that you read this article in its entirety.

In this article, we describe what research aim and objectives are, what distinguishes them from each other, and how to write them correctly.

What is Research Aim?

Research aims describe the purpose or main goal of a project. It help your reader to understand the focus of your research and gives them an idea of what you are trying to accomplish. Research aims are found in their own subsection under the introduction section of all research documents, regardless of whether they are dissertations or research papers.

In most situations, a research aim is expressed as a broad statement of the main goal of the study and doesn’t need to be more than one sentence. The exact format of the outline will vary depending on your preference, but it should all explain the purpose (context), your objective (the actual aim), and how you plan to accomplish it (highlights of your objectives).

What are Research Objectives?

Research aim defines what your study is going to answer, but research objectives outline how it’s going to answer it.

Those objectives break down each component of your research project into smaller portions, each representing a key section of it. Thus, almost all dissertations and theses are organized into numbered lists, with each item getting its own chapter.

Understanding the difference between research objectives and aim

The above explanation should make clear the difference between aim and objectives, but to clarify:

• Aim focus on what a project proposes to achieve; objectives focus on how the project will achieve its goal.
• The research objectives are more specific than the research aims.
• Objectives focus on the short-term and immediate outcomes of a project while aim focus on its long-term outcomes.
• It would be best to write an objective as a numbered list; research aim can be written in one sentence or short paragraph.

How to Write the Aim and Objectives of Research?

It is important to note that there is no definitive way to write clear objectives and aim for research. Researchers typically formulate their goals and objectives in so many different ways, and your supervisor may often influence the formulation based on their preferences.

Nevertheless, there are a few basic principles you should observe to ensure good practice; these principles are listed below.

Research Aim

The aim should include three parts, which address the following questions:

• Why is this research necessary?
• What is the purpose of this study?
• How will you accomplish it?

It is easier to accomplish writing your research aim by addressing each question using its own sentence, although you can combine sentences for each or write multiple sentences for each question, the important thing is to address each one individually.

The first question, why, provides context to your research project, the second question, what describes the aim of your research, and the last question, how, acts as an introduction to your objectives which will immediately follow.

Research Objectives

Each of your research objectives should have the following:

• Specific: Is the action you intend to take unclear, or is it focused and well-defined?
• Assessable: What method will you use to measure your progress and determine when you have accomplished your goal?
• Obtainable: Do you have the necessary support, resources, and facilities to execute the project?
• Relevant: Does the action you propose support the achievement of your research aim?
• Timebound: Are you realistically able to complete the action within the given timeframe?

Properly formulating the aims and objectives of your thesis, dissertation, or research paper is an integral part of its success. Your goals and objectives will determine what your research ultimately looks like in terms of scope, depth, and direction. You will gain clarity in your research and in the minds of your readers if you establish clear aims and objectives, with your aim stating what you wish to achieve, and your objectives indicating how you will do that. Moreover, you will have a clearer direction for your research if you take the time to establish your research objective and aim. This will lead to fewer future issues, but also to a more thorough and cohesive research project.

Feel free to reach out to us here if you need assistance in writing your objectives or aim for your thesis or research. You can also click here to learn more about the services provided.

شارك هذا الموضوع:

You might also like.

How to write a literature review?

Tips for Writing a Strong Introduction for Your Academic Paper

How to Write your Research Hypotheses?

This post has one comment.

I’ve been browsing online greater than three hours these days, but I never discovered any interesting article like yours. It抯 lovely value sufficient for me. In my view, if all website owners and bloggers made excellent content as you probably did, the web can be a lot more useful than ever before.

Leave a Reply Cancel reply

Save my name, email, and website in this browser for the next time I comment.

Notify me of follow-up comments by email.

Notify me of new posts by email.

• Postgraduate Services
• Undergraduates Services
• Publishing & Reseach Services​
• Request quote
• Hedef Academy

Formulating Research Aims and Objectives

Formulating research aim and objectives in an appropriate manner is one of the most important aspects of your thesis. This is because research aim and objectives determine the scope, depth and the overall direction of the research. Research question is the central question of the study that has to be answered on the basis of research findings.

Research aim emphasizes what needs to be achieved within the scope of the research, by the end of the research process. Achievement of research aim provides answer to the research question.

Research objectives divide research aim into several parts and address each part separately. Research aim specifies WHAT needs to be studied and research objectives comprise a number of steps that address HOW research aim will be achieved.

As a rule of dumb, there would be one research aim and several research objectives. Achievement of each research objective will lead to the achievement of the research aim.

Consider the following as an example:

Research title: Effects of organizational culture on business profitability: a case study of Virgin Atlantic

Research aim: To assess the effects of Virgin Atlantic organizational culture on business profitability

Following research objectives would facilitate the achievement of this aim:

• Analyzing the nature of organizational culture at Virgin Atlantic by September 1, 2022
• Identifying factors impacting Virgin Atlantic organizational culture by September 16, 2022
• Analyzing impacts of Virgin Atlantic organizational culture on employee performances by September 30, 2022
• Providing recommendations to Virgin Atlantic strategic level management in terms of increasing the level of effectiveness of organizational culture by October 5, 2022

Figure below illustrates additional examples in formulating research aims and objectives:

Formulation of research question, aim and objectives

Common mistakes in the formulation of research aim relate to the following:

1. Choosing the topic too broadly . This is the most common mistake. For example, a research title of “an analysis of leadership practices” can be classified as too broad because the title fails to answer the following questions:

a) Which aspects of leadership practices? Leadership has many aspects such as employee motivation, ethical behaviour, strategic planning, change management etc. An attempt to cover all of these aspects of organizational leadership within a single research will result in an unfocused and poor work.

b) An analysis of leadership practices in which country? Leadership practices tend to be different in various countries due to cross-cultural differences, legislations and a range of other region-specific factors. Therefore, a study of leadership practices needs to be country-specific.

c) Analysis of leadership practices in which company or industry? Similar to the point above, analysis of leadership practices needs to take into account industry-specific and/or company-specific differences, and there is no way to conduct a leadership research that relates to all industries and organizations in an equal manner.

Accordingly, as an example “a study into the impacts of ethical behaviour of a leader on the level of employee motivation in US healthcare sector” would be a more appropriate title than simply “An analysis of leadership practices”.

2. Setting an unrealistic aim . Formulation of a research aim that involves in-depth interviews with Apple strategic level management by an undergraduate level student can be specified as a bit over-ambitious. This is because securing an interview with Apple CEO Tim Cook or members of Apple Board of Directors might not be easy. This is an extreme example of course, but you got the idea. Instead, you may aim to interview the manager of your local Apple store and adopt a more feasible strategy to get your dissertation completed.

3. Choosing research methods incompatible with the timeframe available . Conducting interviews with 20 sample group members and collecting primary data through 2 focus groups when only three months left until submission of your dissertation can be very difficult, if not impossible. Accordingly, timeframe available need to be taken into account when formulating research aims and objectives and selecting research methods.

Moreover, research objectives need to be formulated according to SMART principle,

 where the abbreviation stands for specific, measurable, achievable, realistic, and time-bound.

Examples of SMART research objectives

At the conclusion part of your research project you will need to reflect on the level of achievement of research aims and objectives. In case your research aims and objectives are not fully achieved by the end of the study, you will need to discuss the reasons. These may include initial inappropriate formulation of research aims and objectives, effects of other variables that were not considered at the beginning of the research or changes in some circumstances during the research process.

John Dudovskiy

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• v.53(4); 2010 Aug

Research questions, hypotheses and objectives

Patricia farrugia.

* Michael G. DeGroote School of Medicine, the

Bradley A. Petrisor

† Division of Orthopaedic Surgery and the

Forough Farrokhyar

‡ Departments of Surgery and

§ Clinical Epidemiology and Biostatistics, McMaster University, Hamilton, Ont

Mohit Bhandari

There is an increasing familiarity with the principles of evidence-based medicine in the surgical community. As surgeons become more aware of the hierarchy of evidence, grades of recommendations and the principles of critical appraisal, they develop an increasing familiarity with research design. Surgeons and clinicians are looking more and more to the literature and clinical trials to guide their practice; as such, it is becoming a responsibility of the clinical research community to attempt to answer questions that are not only well thought out but also clinically relevant. The development of the research question, including a supportive hypothesis and objectives, is a necessary key step in producing clinically relevant results to be used in evidence-based practice. A well-defined and specific research question is more likely to help guide us in making decisions about study design and population and subsequently what data will be collected and analyzed. 1

Objectives of this article

In this article, we discuss important considerations in the development of a research question and hypothesis and in defining objectives for research. By the end of this article, the reader will be able to appreciate the significance of constructing a good research question and developing hypotheses and research objectives for the successful design of a research study. The following article is divided into 3 sections: research question, research hypothesis and research objectives.

Research question

Interest in a particular topic usually begins the research process, but it is the familiarity with the subject that helps define an appropriate research question for a study. 1 Questions then arise out of a perceived knowledge deficit within a subject area or field of study. 2 Indeed, Haynes suggests that it is important to know “where the boundary between current knowledge and ignorance lies.” 1 The challenge in developing an appropriate research question is in determining which clinical uncertainties could or should be studied and also rationalizing the need for their investigation.

Increasing one’s knowledge about the subject of interest can be accomplished in many ways. Appropriate methods include systematically searching the literature, in-depth interviews and focus groups with patients (and proxies) and interviews with experts in the field. In addition, awareness of current trends and technological advances can assist with the development of research questions. 2 It is imperative to understand what has been studied about a topic to date in order to further the knowledge that has been previously gathered on a topic. Indeed, some granting institutions (e.g., Canadian Institute for Health Research) encourage applicants to conduct a systematic review of the available evidence if a recent review does not already exist and preferably a pilot or feasibility study before applying for a grant for a full trial.

In-depth knowledge about a subject may generate a number of questions. It then becomes necessary to ask whether these questions can be answered through one study or if more than one study needed. 1 Additional research questions can be developed, but several basic principles should be taken into consideration. 1 All questions, primary and secondary, should be developed at the beginning and planning stages of a study. Any additional questions should never compromise the primary question because it is the primary research question that forms the basis of the hypothesis and study objectives. It must be kept in mind that within the scope of one study, the presence of a number of research questions will affect and potentially increase the complexity of both the study design and subsequent statistical analyses, not to mention the actual feasibility of answering every question. 1 A sensible strategy is to establish a single primary research question around which to focus the study plan. 3 In a study, the primary research question should be clearly stated at the end of the introduction of the grant proposal, and it usually specifies the population to be studied, the intervention to be implemented and other circumstantial factors. 4

Hulley and colleagues 2 have suggested the use of the FINER criteria in the development of a good research question ( Box 1 ). The FINER criteria highlight useful points that may increase the chances of developing a successful research project. A good research question should specify the population of interest, be of interest to the scientific community and potentially to the public, have clinical relevance and further current knowledge in the field (and of course be compliant with the standards of ethical boards and national research standards).

FINER criteria for a good research question

Adapted with permission from Wolters Kluwer Health. 2

Whereas the FINER criteria outline the important aspects of the question in general, a useful format to use in the development of a specific research question is the PICO format — consider the population (P) of interest, the intervention (I) being studied, the comparison (C) group (or to what is the intervention being compared) and the outcome of interest (O). 3 , 5 , 6 Often timing (T) is added to PICO ( Box 2 ) — that is, “Over what time frame will the study take place?” 1 The PICOT approach helps generate a question that aids in constructing the framework of the study and subsequently in protocol development by alluding to the inclusion and exclusion criteria and identifying the groups of patients to be included. Knowing the specific population of interest, intervention (and comparator) and outcome of interest may also help the researcher identify an appropriate outcome measurement tool. 7 The more defined the population of interest, and thus the more stringent the inclusion and exclusion criteria, the greater the effect on the interpretation and subsequent applicability and generalizability of the research findings. 1 , 2 A restricted study population (and exclusion criteria) may limit bias and increase the internal validity of the study; however, this approach will limit external validity of the study and, thus, the generalizability of the findings to the practical clinical setting. Conversely, a broadly defined study population and inclusion criteria may be representative of practical clinical practice but may increase bias and reduce the internal validity of the study.

PICOT criteria 1

A poorly devised research question may affect the choice of study design, potentially lead to futile situations and, thus, hamper the chance of determining anything of clinical significance, which will then affect the potential for publication. Without devoting appropriate resources to developing the research question, the quality of the study and subsequent results may be compromised. During the initial stages of any research study, it is therefore imperative to formulate a research question that is both clinically relevant and answerable.

Research hypothesis

The primary research question should be driven by the hypothesis rather than the data. 1 , 2 That is, the research question and hypothesis should be developed before the start of the study. This sounds intuitive; however, if we take, for example, a database of information, it is potentially possible to perform multiple statistical comparisons of groups within the database to find a statistically significant association. This could then lead one to work backward from the data and develop the “question.” This is counterintuitive to the process because the question is asked specifically to then find the answer, thus collecting data along the way (i.e., in a prospective manner). Multiple statistical testing of associations from data previously collected could potentially lead to spuriously positive findings of association through chance alone. 2 Therefore, a good hypothesis must be based on a good research question at the start of a trial and, indeed, drive data collection for the study.

The research or clinical hypothesis is developed from the research question and then the main elements of the study — sampling strategy, intervention (if applicable), comparison and outcome variables — are summarized in a form that establishes the basis for testing, statistical and ultimately clinical significance. 3 For example, in a research study comparing computer-assisted acetabular component insertion versus freehand acetabular component placement in patients in need of total hip arthroplasty, the experimental group would be computer-assisted insertion and the control/conventional group would be free-hand placement. The investigative team would first state a research hypothesis. This could be expressed as a single outcome (e.g., computer-assisted acetabular component placement leads to improved functional outcome) or potentially as a complex/composite outcome; that is, more than one outcome (e.g., computer-assisted acetabular component placement leads to both improved radiographic cup placement and improved functional outcome).

However, when formally testing statistical significance, the hypothesis should be stated as a “null” hypothesis. 2 The purpose of hypothesis testing is to make an inference about the population of interest on the basis of a random sample taken from that population. The null hypothesis for the preceding research hypothesis then would be that there is no difference in mean functional outcome between the computer-assisted insertion and free-hand placement techniques. After forming the null hypothesis, the researchers would form an alternate hypothesis stating the nature of the difference, if it should appear. The alternate hypothesis would be that there is a difference in mean functional outcome between these techniques. At the end of the study, the null hypothesis is then tested statistically. If the findings of the study are not statistically significant (i.e., there is no difference in functional outcome between the groups in a statistical sense), we cannot reject the null hypothesis, whereas if the findings were significant, we can reject the null hypothesis and accept the alternate hypothesis (i.e., there is a difference in mean functional outcome between the study groups), errors in testing notwithstanding. In other words, hypothesis testing confirms or refutes the statement that the observed findings did not occur by chance alone but rather occurred because there was a true difference in outcomes between these surgical procedures. The concept of statistical hypothesis testing is complex, and the details are beyond the scope of this article.

Another important concept inherent in hypothesis testing is whether the hypotheses will be 1-sided or 2-sided. A 2-sided hypothesis states that there is a difference between the experimental group and the control group, but it does not specify in advance the expected direction of the difference. For example, we asked whether there is there an improvement in outcomes with computer-assisted surgery or whether the outcomes worse with computer-assisted surgery. We presented a 2-sided test in the above example because we did not specify the direction of the difference. A 1-sided hypothesis states a specific direction (e.g., there is an improvement in outcomes with computer-assisted surgery). A 2-sided hypothesis should be used unless there is a good justification for using a 1-sided hypothesis. As Bland and Atlman 8 stated, “One-sided hypothesis testing should never be used as a device to make a conventionally nonsignificant difference significant.”

The research hypothesis should be stated at the beginning of the study to guide the objectives for research. Whereas the investigators may state the hypothesis as being 1-sided (there is an improvement with treatment), the study and investigators must adhere to the concept of clinical equipoise. According to this principle, a clinical (or surgical) trial is ethical only if the expert community is uncertain about the relative therapeutic merits of the experimental and control groups being evaluated. 9 It means there must exist an honest and professional disagreement among expert clinicians about the preferred treatment. 9

Designing a research hypothesis is supported by a good research question and will influence the type of research design for the study. Acting on the principles of appropriate hypothesis development, the study can then confidently proceed to the development of the research objective.

Research objective

The primary objective should be coupled with the hypothesis of the study. Study objectives define the specific aims of the study and should be clearly stated in the introduction of the research protocol. 7 From our previous example and using the investigative hypothesis that there is a difference in functional outcomes between computer-assisted acetabular component placement and free-hand placement, the primary objective can be stated as follows: this study will compare the functional outcomes of computer-assisted acetabular component insertion versus free-hand placement in patients undergoing total hip arthroplasty. Note that the study objective is an active statement about how the study is going to answer the specific research question. Objectives can (and often do) state exactly which outcome measures are going to be used within their statements. They are important because they not only help guide the development of the protocol and design of study but also play a role in sample size calculations and determining the power of the study. 7 These concepts will be discussed in other articles in this series.

From the surgeon’s point of view, it is important for the study objectives to be focused on outcomes that are important to patients and clinically relevant. For example, the most methodologically sound randomized controlled trial comparing 2 techniques of distal radial fixation would have little or no clinical impact if the primary objective was to determine the effect of treatment A as compared to treatment B on intraoperative fluoroscopy time. However, if the objective was to determine the effect of treatment A as compared to treatment B on patient functional outcome at 1 year, this would have a much more significant impact on clinical decision-making. Second, more meaningful surgeon–patient discussions could ensue, incorporating patient values and preferences with the results from this study. 6 , 7 It is the precise objective and what the investigator is trying to measure that is of clinical relevance in the practical setting.

The following is an example from the literature about the relation between the research question, hypothesis and study objectives:

Study: Warden SJ, Metcalf BR, Kiss ZS, et al. Low-intensity pulsed ultrasound for chronic patellar tendinopathy: a randomized, double-blind, placebo-controlled trial. Rheumatology 2008;47:467–71.

Research question: How does low-intensity pulsed ultrasound (LIPUS) compare with a placebo device in managing the symptoms of skeletally mature patients with patellar tendinopathy?

Research hypothesis: Pain levels are reduced in patients who receive daily active-LIPUS (treatment) for 12 weeks compared with individuals who receive inactive-LIPUS (placebo).

Objective: To investigate the clinical efficacy of LIPUS in the management of patellar tendinopathy symptoms.

The development of the research question is the most important aspect of a research project. A research project can fail if the objectives and hypothesis are poorly focused and underdeveloped. Useful tips for surgical researchers are provided in Box 3 . Designing and developing an appropriate and relevant research question, hypothesis and objectives can be a difficult task. The critical appraisal of the research question used in a study is vital to the application of the findings to clinical practice. Focusing resources, time and dedication to these 3 very important tasks will help to guide a successful research project, influence interpretation of the results and affect future publication efforts.

Tips for developing research questions, hypotheses and objectives for research studies

• Perform a systematic literature review (if one has not been done) to increase knowledge and familiarity with the topic and to assist with research development.
• Learn about current trends and technological advances on the topic.
• Seek careful input from experts, mentors, colleagues and collaborators to refine your research question as this will aid in developing the research question and guide the research study.
• Use the FINER criteria in the development of the research question.
• Ensure that the research question follows PICOT format.
• Develop a research hypothesis from the research question.
• Develop clear and well-defined primary and secondary (if needed) objectives.
• Ensure that the research question and objectives are answerable, feasible and clinically relevant.

FINER = feasible, interesting, novel, ethical, relevant; PICOT = population (patients), intervention (for intervention studies only), comparison group, outcome of interest, time.

Competing interests: No funding was received in preparation of this paper. Dr. Bhandari was funded, in part, by a Canada Research Chair, McMaster University.

404 Not found

404 Not found

• Privacy Policy

Buy Me a Coffee

Home » Dissertation – Format, Example and Template

Dissertation – Format, Example and Template

Table of Contents

Dissertation

Definition:

Dissertation is a lengthy and detailed academic document that presents the results of original research on a specific topic or question. It is usually required as a final project for a doctoral degree or a master’s degree.

Dissertation Meaning in Research

In Research , a dissertation refers to a substantial research project that students undertake in order to obtain an advanced degree such as a Ph.D. or a Master’s degree.

Dissertation typically involves the exploration of a particular research question or topic in-depth, and it requires students to conduct original research, analyze data, and present their findings in a scholarly manner. It is often the culmination of years of study and represents a significant contribution to the academic field.

Types of Dissertation

Types of Dissertation are as follows:

Empirical Dissertation

An empirical dissertation is a research study that uses primary data collected through surveys, experiments, or observations. It typically follows a quantitative research approach and uses statistical methods to analyze the data.

Non-Empirical Dissertation

A non-empirical dissertation is based on secondary sources, such as books, articles, and online resources. It typically follows a qualitative research approach and uses methods such as content analysis or discourse analysis.

Narrative Dissertation

A narrative dissertation is a personal account of the researcher’s experience or journey. It typically follows a qualitative research approach and uses methods such as interviews, focus groups, or ethnography.

Systematic Literature Review

A systematic literature review is a comprehensive analysis of existing research on a specific topic. It typically follows a qualitative research approach and uses methods such as meta-analysis or thematic analysis.

Case Study Dissertation

A case study dissertation is an in-depth analysis of a specific individual, group, or organization. It typically follows a qualitative research approach and uses methods such as interviews, observations, or document analysis.

Mixed-Methods Dissertation

A mixed-methods dissertation combines both quantitative and qualitative research approaches to gather and analyze data. It typically uses methods such as surveys, interviews, and focus groups, as well as statistical analysis.

How to Write a Dissertation

Here are some general steps to help guide you through the process of writing a dissertation:

• Choose a topic : Select a topic that you are passionate about and that is relevant to your field of study. It should be specific enough to allow for in-depth research but broad enough to be interesting and engaging.
• Conduct research : Conduct thorough research on your chosen topic, utilizing a variety of sources, including books, academic journals, and online databases. Take detailed notes and organize your information in a way that makes sense to you.
• Create an outline : Develop an outline that will serve as a roadmap for your dissertation. The outline should include the introduction, literature review, methodology, results, discussion, and conclusion.
• Write the introduction: The introduction should provide a brief overview of your topic, the research questions, and the significance of the study. It should also include a clear thesis statement that states your main argument.
• Write the literature review: The literature review should provide a comprehensive analysis of existing research on your topic. It should identify gaps in the research and explain how your study will fill those gaps.
• Write the methodology: The methodology section should explain the research methods you used to collect and analyze data. It should also include a discussion of any limitations or weaknesses in your approach.
• Write the results: The results section should present the findings of your research in a clear and organized manner. Use charts, graphs, and tables to help illustrate your data.
• Write the discussion: The discussion section should interpret your results and explain their significance. It should also address any limitations of the study and suggest areas for future research.
• Write the conclusion: The conclusion should summarize your main findings and restate your thesis statement. It should also provide recommendations for future research.
• Edit and revise: Once you have completed a draft of your dissertation, review it carefully to ensure that it is well-organized, clear, and free of errors. Make any necessary revisions and edits before submitting it to your advisor for review.

Dissertation Format

The format of a dissertation may vary depending on the institution and field of study, but generally, it follows a similar structure:

• Title Page: This includes the title of the dissertation, the author’s name, and the date of submission.
• Abstract : A brief summary of the dissertation’s purpose, methods, and findings.
• Table of Contents: A list of the main sections and subsections of the dissertation, along with their page numbers.
• Introduction : A statement of the problem or research question, a brief overview of the literature, and an explanation of the significance of the study.
• Literature Review : A comprehensive review of the literature relevant to the research question or problem.
• Methodology : A description of the methods used to conduct the research, including data collection and analysis procedures.
• Results : A presentation of the findings of the research, including tables, charts, and graphs.
• Discussion : A discussion of the implications of the findings, their significance in the context of the literature, and limitations of the study.
• Conclusion : A summary of the main points of the study and their implications for future research.
• References : A list of all sources cited in the dissertation.
• Appendices : Additional materials that support the research, such as data tables, charts, or transcripts.

Dissertation Outline

Dissertation Outline is as follows:

Title Page:

• Title of dissertation
• Author name
• Institutional affiliation
• Date of submission
• Brief summary of the dissertation’s research problem, objectives, methods, findings, and implications
• Usually around 250-300 words

Table of Contents:

• List of chapters and sections in the dissertation, with page numbers for each

I. Introduction

• Background and context of the research
• Research problem and objectives
• Significance of the research

II. Literature Review

• Overview of existing literature on the research topic
• Identification of gaps in the literature
• Theoretical framework and concepts

III. Methodology

• Research design and methods used
• Data collection and analysis techniques
• Ethical considerations

IV. Results

• Presentation and analysis of data collected
• Findings and outcomes of the research
• Interpretation of the results

V. Discussion

• Discussion of the results in relation to the research problem and objectives
• Evaluation of the research outcomes and implications
• Suggestions for future research

VI. Conclusion

• Summary of the research findings and outcomes
• Implications for the research topic and field
• Limitations and recommendations for future research

VII. References

• List of sources cited in the dissertation

VIII. Appendices

• Additional materials that support the research, such as tables, figures, or questionnaires.

Example of Dissertation

Here is an example Dissertation for students:

Title : Exploring the Effects of Mindfulness Meditation on Academic Achievement and Well-being among College Students

This dissertation aims to investigate the impact of mindfulness meditation on the academic achievement and well-being of college students. Mindfulness meditation has gained popularity as a technique for reducing stress and enhancing mental health, but its effects on academic performance have not been extensively studied. Using a randomized controlled trial design, the study will compare the academic performance and well-being of college students who practice mindfulness meditation with those who do not. The study will also examine the moderating role of personality traits and demographic factors on the effects of mindfulness meditation.

Chapter Outline:

Chapter 1: Introduction

• Background and rationale for the study
• Research questions and objectives
• Significance of the study
• Overview of the dissertation structure

Chapter 2: Literature Review

• Definition and conceptualization of mindfulness meditation
• Theoretical framework of mindfulness meditation
• Empirical research on mindfulness meditation and academic achievement
• Empirical research on mindfulness meditation and well-being
• The role of personality and demographic factors in the effects of mindfulness meditation

Chapter 3: Methodology

• Research design and hypothesis
• Participants and sampling method
• Intervention and procedure
• Measures and instruments
• Data analysis method

Chapter 4: Results

• Descriptive statistics and data screening
• Analysis of main effects
• Analysis of moderating effects
• Post-hoc analyses and sensitivity tests

Chapter 5: Discussion

• Summary of findings
• Implications for theory and practice
• Limitations and directions for future research
• Conclusion and contribution to the literature

Chapter 6: Conclusion

• Recap of the research questions and objectives
• Summary of the key findings
• Contribution to the literature and practice
• Implications for policy and practice
• Final thoughts and recommendations.

References :

List of all the sources cited in the dissertation

Appendices :

Additional materials such as the survey questionnaire, interview guide, and consent forms.

Note : This is just an example and the structure of a dissertation may vary depending on the specific requirements and guidelines provided by the institution or the supervisor.

How Long is a Dissertation

The length of a dissertation can vary depending on the field of study, the level of degree being pursued, and the specific requirements of the institution. Generally, a dissertation for a doctoral degree can range from 80,000 to 100,000 words, while a dissertation for a master’s degree may be shorter, typically ranging from 20,000 to 50,000 words. However, it is important to note that these are general guidelines and the actual length of a dissertation can vary widely depending on the specific requirements of the program and the research topic being studied. It is always best to consult with your academic advisor or the guidelines provided by your institution for more specific information on dissertation length.

Applications of Dissertation

Here are some applications of a dissertation:

• Advancing the Field: Dissertations often include new research or a new perspective on existing research, which can help to advance the field. The results of a dissertation can be used by other researchers to build upon or challenge existing knowledge, leading to further advancements in the field.
• Career Advancement: Completing a dissertation demonstrates a high level of expertise in a particular field, which can lead to career advancement opportunities. For example, having a PhD can open doors to higher-paying jobs in academia, research institutions, or the private sector.
• Publishing Opportunities: Dissertations can be published as books or journal articles, which can help to increase the visibility and credibility of the author’s research.
• Personal Growth: The process of writing a dissertation involves a significant amount of research, analysis, and critical thinking. This can help students to develop important skills, such as time management, problem-solving, and communication, which can be valuable in both their personal and professional lives.
• Policy Implications: The findings of a dissertation can have policy implications, particularly in fields such as public health, education, and social sciences. Policymakers can use the research to inform decision-making and improve outcomes for the population.

When to Write a Dissertation

Here are some situations where writing a dissertation may be necessary:

• Pursuing a Doctoral Degree: Writing a dissertation is usually a requirement for earning a doctoral degree, so if you are interested in pursuing a doctorate, you will likely need to write a dissertation.
• Conducting Original Research : Dissertations require students to conduct original research on a specific topic. If you are interested in conducting original research on a topic, writing a dissertation may be the best way to do so.
• Advancing Your Career: Some professions, such as academia and research, may require individuals to have a doctoral degree. Writing a dissertation can help you advance your career by demonstrating your expertise in a particular area.
• Contributing to Knowledge: Dissertations are often based on original research that can contribute to the knowledge base of a field. If you are passionate about advancing knowledge in a particular area, writing a dissertation can help you achieve that goal.
• Meeting Academic Requirements : If you are a graduate student, writing a dissertation may be a requirement for completing your program. Be sure to check with your academic advisor to determine if this is the case for you.

Purpose of Dissertation

some common purposes of a dissertation include:

• To contribute to the knowledge in a particular field : A dissertation is often the culmination of years of research and study, and it should make a significant contribution to the existing body of knowledge in a particular field.
• To demonstrate mastery of a subject: A dissertation requires extensive research, analysis, and writing, and completing one demonstrates a student’s mastery of their subject area.
• To develop critical thinking and research skills : A dissertation requires students to think critically about their research question, analyze data, and draw conclusions based on evidence. These skills are valuable not only in academia but also in many professional fields.
• To demonstrate academic integrity: A dissertation must be conducted and written in accordance with rigorous academic standards, including ethical considerations such as obtaining informed consent, protecting the privacy of participants, and avoiding plagiarism.
• To prepare for an academic career: Completing a dissertation is often a requirement for obtaining a PhD and pursuing a career in academia. It can demonstrate to potential employers that the student has the necessary skills and experience to conduct original research and make meaningful contributions to their field.
• To develop writing and communication skills: A dissertation requires a significant amount of writing and communication skills to convey complex ideas and research findings in a clear and concise manner. This skill set can be valuable in various professional fields.
• To demonstrate independence and initiative: A dissertation requires students to work independently and take initiative in developing their research question, designing their study, collecting and analyzing data, and drawing conclusions. This demonstrates to potential employers or academic institutions that the student is capable of independent research and taking initiative in their work.
• To contribute to policy or practice: Some dissertations may have a practical application, such as informing policy decisions or improving practices in a particular field. These dissertations can have a significant impact on society, and their findings may be used to improve the lives of individuals or communities.
• To pursue personal interests: Some students may choose to pursue a dissertation topic that aligns with their personal interests or passions, providing them with the opportunity to delve deeper into a topic that they find personally meaningful.

Advantage of Dissertation

Some advantages of writing a dissertation include:

• Developing research and analytical skills: The process of writing a dissertation involves conducting extensive research, analyzing data, and presenting findings in a clear and coherent manner. This process can help students develop important research and analytical skills that can be useful in their future careers.
• Demonstrating expertise in a subject: Writing a dissertation allows students to demonstrate their expertise in a particular subject area. It can help establish their credibility as a knowledgeable and competent professional in their field.
• Contributing to the academic community: A well-written dissertation can contribute new knowledge to the academic community and potentially inform future research in the field.
• Improving writing and communication skills : Writing a dissertation requires students to write and present their research in a clear and concise manner. This can help improve their writing and communication skills, which are essential for success in many professions.
• Increasing job opportunities: Completing a dissertation can increase job opportunities in certain fields, particularly in academia and research-based positions.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Data Collection – Methods Types and Examples

Delimitations in Research – Types, Examples and...

Research Process – Steps, Examples and Tips

Research Design – Types, Methods and Examples

Institutional Review Board – Application Sample...

Evaluating Research – Process, Examples and...

  [email protected]

• English English Spanish German French Turkish

How Can You Write Research Objectives for Your Dissertation?

Briefly, research objectives are all about what you intend to achieve in your project. Therefore, they are expected to list every stage of the research and cover which methods they have used to gather data, establish their focal point, and advance their conclusions.

What do research objectives cover?

Suppose you wish to define what your  research aims  to achieve and elaborate on why you conduct it. In that case, your research objectives address these issues. On top of that, they epitomize the approach and aim of your project and help you concentrate on your study. The usual place for research objectives is the introduction of your dissertation or research article. They must cover the extent and profundity of your research, align with your research design, and state how your study will complement existing knowledge.

What do we mean by research objectives?

Briefly, research objectives are all about what you intend to achieve in your project. Therefore, they are expected to list every stage of the research and cover which methods they have used to gather data, establish their focal point, and advance their conclusions. One should remember that research objectives may change as the research develops. Nonetheless, they must align with the research conducted and the subject of the study.

What do we mean by research aim?

One should differentiate between research objectives and research aims. Precisely, the research aim is more general than the research objectives. Therefore, the research aim is expected to include the primary purpose of the research. Its most probable location is at the end of the problem statement. Hence, it should come before the research objectives. Research objectives should be more explicit than the research aim. It means that they had better indicate the specific concentration and methodology of the project. Even though you must state one research aim, you will probably list several research objectives. Illustratively, your research aim may include investigating the economic impact of World Wars on the world economy. However, you may have several research objectives such as the effects of World War I on the world economy, impacts of World War II on the world economy, the influences of World War I in Asia, the consequences of World War II on Russia, and the devastating effect of World War I on the German economy.

Are research objectives critical?

The answer is affirmative. Research objectives are crucial because:

a) They build the extent and profundity of your research. It is critical because it prevents you from studying something irrelevant. It also secures the assessment ability of your research methodologies and conclusions. 

b) They are the primary determinants of your study design. Thanks to research objectives, you may have a more precise idea of what fits bests in your research.

c) Last but not least, they disclose how your study fills the gap in or contributes to the existing knowledge. They enable you to demonstrate your understanding of au fait research, utilize or establish contemporary research methods and endeavor to add to recent discussions.

How to pen research aims and objectives?

After stating the research problem, you aim to achieve, the following step is deciding how to address it. Your research aims and objectives are there to help you out. It is better to follow the pursuing stages:

a) Your research aim is related to your research problem. Thus, it must be broad.

b) Dividing your research aim into meaningful parts will help address the research problem. Exceedingly relevant is to state the unique aspects of the problem you wish to explore and comprehend.

c) After establishing the research aim and objectives, what pursues is defining them explicitly and precisely to the readers.

Outlining your aims and objectives at the end of your problem statement is appropriate. Please formulate them as clear definitive statements and employ suitable verbs to precisely portray the research that you will conduct. You should also remember that your objectives must be specific, measurable, attainable, pertinent, and time conscious. It can only be possible if you employ appropriate methodologies, have relevant literature, elaborate on your results profoundly, and concentrate on what future research should cover. Only then can you have a unique, productive, and citable study.

If you need us to make your thesis or dissertation, contact us unhesitatingly!

Best Edit & Proof expert editors and proofreaders focus on offering papers with proper tone, content, and style of  academic writing,  and also provide an upscale  editing and proofreading service  for you. If you consider our pieces of advice, you will witness a notable increase in the chance for your research manuscript to be accepted by the publishers. We work together as an academic writing style guide by bestowing subject-area editing and proofreading around several categorized writing styles. With the group of our expert editors, you will always find us all set to help you identify the tone and style that your manuscript needs to get a nod from the publishers.

English formatting service

You can also avail of our assistance if you are looking for editors who can format your manuscript, or just check on the  particular styles  for the formatting task as per the guidelines provided to you, e.g.,  APA,  MLA, or Chicago/Turabian styles. Best Edit & Proof editors and proofreaders provide all sorts of academic writing help, including editing and proofreading services, using our user-friendly website, and a streamlined ordering process.

Get a free quote for editing and proofreading now!

Visit our  order page  if you want our subject-area editors or language experts to work on your manuscript to improve its tone and style and give it a perfect academic tone and style through proper editing and proofreading. The process of submitting a paper is very easy and quick. Click here to find out how it  works.

Our pricing is based on the type of service you avail of here, be it editing or proofreading. We charge on the basis of the word count of your manuscript that you submit for editing and proofreading and the turnaround time it takes to get it done. If you want to get an instant price quote for your project, copy and paste your document or enter your word count into our  pricing calculator.

24/7 customer support | Live support

Contact us to get support with academic editing and proofreading. We have a 24/7 active live chat mode to offer you direct support along with qualified editors to refine and furbish your manuscript.

Stay tuned for updated information about editing and proofreading services!

Follow us on  Twitter,  LinkedIn,    Facebook,  Instagram,  and  Medium .

For more posts, click  here.  

This article explains how to write research objectives for a dissertation or thesis. To give you an opportunity to practice proofreading, we have left a few spelling, punctuation, or grammatical errors in the text. See if you can spot them! If you spot the errors correctly, you will be entitled to a 10% discount.

• Editing & Proofreading
• Citation Styles
• Grammar Rules
• Academic Writing
• Proofreading
• Microsoft Tools
• Academic Publishing
• Dissertation & Thesis
• Researching
• Job & Research Application

Similar Posts

How to Determine Variability in a Dataset

Population vs Sample | Sampling Methods for a Dissertation

7 Issues to Avoid That may Dent the Quality of Thesis Writing

How to Ensure the Quality of Academic Writing in a Thesis and Dissertation?

How to Define Population and Sample in a Dissertation?

How can You Establish Experimental Design in Your Dissertation?

How Can You Decide on Tense Usage in Your Dissertation?

How Can You Write an Abstract for Your Dissertation?

How to Build Research Methods for Your Dissertation

How to Build a Strong Hypothesis for Your Dissertation

Recent Posts

How to Determine Central Tendency

ANOVA vs MANOVA: Which Method to Use in Dissertations?

How to Specify Study Variables in Research Papers?

They Also Read

Research methodology is about the data collection and analysis methods employed in your research. Thus, this section addresses what you performed and how you did it, letting readers assess the reliability and validity of your study and is a critical part of your thesis or dissertation.

Now, you have finished your thesis or dissertation. The next is writing a research paper based on your thesis and dissertation. A research paper is vital for academic writing, supplying in-depth analysis, comments, and in-depth discussion about your research.

The first step includes choosing a subject for your thesis, dissertation, or research project and ensuring the process becomes rewarding and smooth. One should consider many issues before deciding on a topic.

The corpus research suggests that the most often used tenses in academic writing are the simple present, the simple past, and the present perfect. Then, what comes next is the future tense.

While researching a group of people, collecting data from every person in that group is virtually impossible. To counter this issue, you choose a sample. What is the difference between population and sample? What sampling methods should you use in your dissertation?

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Starting the research process
• How to Write a Research Proposal | Examples & Templates

How to Write a Research Proposal | Examples & Templates

Published on October 12, 2022 by Shona McCombes and Tegan George. Revised on November 21, 2023.

A research proposal describes what you will investigate, why it’s important, and how you will conduct your research.

The format of a research proposal varies between fields, but most proposals will contain at least these elements:

Introduction

Literature review.

• Research design

Reference list

While the sections may vary, the overall objective is always the same. A research proposal serves as a blueprint and guide for your research plan, helping you get organized and feel confident in the path forward you choose to take.

Table of contents

Research proposal purpose, research proposal examples, research design and methods, contribution to knowledge, research schedule, other interesting articles, frequently asked questions about research proposals.

Academics often have to write research proposals to get funding for their projects. As a student, you might have to write a research proposal as part of a grad school application , or prior to starting your thesis or dissertation .

In addition to helping you figure out what your research can look like, a proposal can also serve to demonstrate why your project is worth pursuing to a funder, educational institution, or supervisor.

Research proposal length

The length of a research proposal can vary quite a bit. A bachelor’s or master’s thesis proposal can be just a few pages, while proposals for PhD dissertations or research funding are usually much longer and more detailed. Your supervisor can help you determine the best length for your work.

One trick to get started is to think of your proposal’s structure as a shorter version of your thesis or dissertation , only without the results , conclusion and discussion sections.

Download our research proposal template

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

Writing a research proposal can be quite challenging, but a good starting point could be to look at some examples. We’ve included a few for you below.

• Example research proposal #1: “A Conceptual Framework for Scheduling Constraint Management”
• Example research proposal #2: “Medical Students as Mediators of Change in Tobacco Use”

Like your dissertation or thesis, the proposal will usually have a title page that includes:

• The proposed title of your project
• Your supervisor’s name
• Your institution and department

The first part of your proposal is the initial pitch for your project. Make sure it succinctly explains what you want to do and why.

Your introduction should:

• Introduce your topic
• Give necessary background and context
• Outline your  problem statement  and research questions

To guide your introduction , include information about:

• Who could have an interest in the topic (e.g., scientists, policymakers)
• How much is already known about the topic
• What is missing from this current knowledge
• What new insights your research will contribute
• Why you believe this research is worth doing

As you get started, it’s important to demonstrate that you’re familiar with the most important research on your topic. A strong literature review  shows your reader that your project has a solid foundation in existing knowledge or theory. It also shows that you’re not simply repeating what other people have already done or said, but rather using existing research as a jumping-off point for your own.

In this section, share exactly how your project will contribute to ongoing conversations in the field by:

• Comparing and contrasting the main theories, methods, and debates
• Examining the strengths and weaknesses of different approaches
• Explaining how will you build on, challenge, or synthesize prior scholarship

Following the literature review, restate your main  objectives . This brings the focus back to your own project. Next, your research design or methodology section will describe your overall approach, and the practical steps you will take to answer your research questions.

To finish your proposal on a strong note, explore the potential implications of your research for your field. Emphasize again what you aim to contribute and why it matters.

For example, your results might have implications for:

• Improving best practices
• Informing policymaking decisions
• Strengthening a theory or model
• Challenging popular or scientific beliefs
• Creating a basis for future research

Last but not least, your research proposal must include correct citations for every source you have used, compiled in a reference list . To create citations quickly and easily, you can use our free APA citation generator .

Some institutions or funders require a detailed timeline of the project, asking you to forecast what you will do at each stage and how long it may take. While not always required, be sure to check the requirements of your project.

Here’s an example schedule to help you get started. You can also download a template at the button below.

Download our research schedule template

If you are applying for research funding, chances are you will have to include a detailed budget. This shows your estimates of how much each part of your project will cost.

Make sure to check what type of costs the funding body will agree to cover. For each item, include:

• Cost : exactly how much money do you need?
• Justification : why is this cost necessary to complete the research?
• Source : how did you calculate the amount?

To determine your budget, think about:

• Travel costs : do you need to go somewhere to collect your data? How will you get there, and how much time will you need? What will you do there (e.g., interviews, archival research)?
• Materials : do you need access to any tools or technologies?
• Help : do you need to hire any research assistants for the project? What will they do, and how much will you pay them?

If you want to know more about the research process , methodology , research bias , or statistics , make sure to check out some of our other articles with explanations and examples.

Methodology

• Sampling methods
• Simple random sampling
• Stratified sampling
• Cluster sampling
• Likert scales
• Reproducibility

 Statistics

• Null hypothesis
• Statistical power
• Probability distribution
• Effect size
• Poisson distribution

Research bias

• Optimism bias
• Cognitive bias
• Implicit bias
• Hawthorne effect
• Anchoring bias
• Explicit bias

Once you’ve decided on your research objectives , you need to explain them in your paper, at the end of your problem statement .

Keep your research objectives clear and concise, and use appropriate verbs to accurately convey the work that you will carry out for each one.

I will compare …

A research aim is a broad statement indicating the general purpose of your research project. It should appear in your introduction at the end of your problem statement , before your research objectives.

Research objectives are more specific than your research aim. They indicate the specific ways you’ll address the overarching aim.

A PhD, which is short for philosophiae doctor (doctor of philosophy in Latin), is the highest university degree that can be obtained. In a PhD, students spend 3–5 years writing a dissertation , which aims to make a significant, original contribution to current knowledge.

A PhD is intended to prepare students for a career as a researcher, whether that be in academia, the public sector, or the private sector.

A master’s is a 1- or 2-year graduate degree that can prepare you for a variety of careers.

All master’s involve graduate-level coursework. Some are research-intensive and intend to prepare students for further study in a PhD; these usually require their students to write a master’s thesis . Others focus on professional training for a specific career.

Critical thinking refers to the ability to evaluate information and to be aware of biases or assumptions, including your own.

Like information literacy , it involves evaluating arguments, identifying and solving problems in an objective and systematic way, and clearly communicating your ideas.

The best way to remember the difference between a research plan and a research proposal is that they have fundamentally different audiences. A research plan helps you, the researcher, organize your thoughts. On the other hand, a dissertation proposal or research proposal aims to convince others (e.g., a supervisor, a funding body, or a dissertation committee) that your research topic is relevant and worthy of being conducted.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

McCombes, S. & George, T. (2023, November 21). How to Write a Research Proposal | Examples & Templates. Scribbr. Retrieved April 15, 2024, from https://www.scribbr.com/research-process/research-proposal/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a problem statement | guide & examples, writing strong research questions | criteria & examples, how to write a literature review | guide, examples, & templates, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

Dissertations and research projects

• Book a session
• Planning your research
• Qualitative research
• Quantitative research

Introductions

Literature review, methodology, conclusions, working with your supervisor.

• e-learning and books
• SkillsCheck This link opens in a new window
• ⬅ Back to Skills Centre This link opens in a new window
• Review this resource

What is an abstract?

The abstract is a brief summary of your dissertation to help a new reader understand the purpose and content of the document, in much the same way as you would read the abstract of a journal article to help decide whether it was relevant to your work. The function of the abstract is to describe and summarise the contents of the dissertation, rather than making critical or evaluative statements about the project.

When should I write the abstract?

The abstract should be the last section you write before submitting your final dissertation or extended project report, as the content will only be decided once the main document is complete. 

What should I include?

One of the best ways to find the right ‘voice’ for the abstract is to look at other examples, either from dissertations in your field or study, or from journal articles. Look out for examples that you feel communicate complex ideas in a simple and accessible way. Your abstract should be clear and understandable to a non-specialist, so avoid specialist vocabulary as far as possible, and use simple sentence structures over longer more complex constructions. You can find a list of phrases for abstract writing here .

Most abstracts are written in the present tense, but this may differ in some disciplines, so find examples to inform your decision on how to write. Avoid the future tense - ‘this dissertation will consider’ - as the research has already been completed by the time someone is reading the abstract! You can explore some key phrases to use in abstract writing here.

Examples of dissertation abstracts Dissertation abstracts, University of Leeds Overview of what to include in your abstract, University of Wisconsin - Madison Abstract structures from different disciplines, The Writing Center For examples from Sheffield Hallam University, use the 'Advanced Search' function in Library Search to access ‘Dissertations/Theses’.

What should the introduction include?

Your introduction should cover the following points:.

• Provide context and set the scene for your research project using literature where necessary.
• Explain the rationale and value of the project.
• Provide definitions and address general limitations in the literature that have influenced the topic or scope of your project.
• Present your research aims and objectives, which may also be phrased as the research ‘problem’ or questions.

Although it is important to draft your research aims and objectives early in the research process, the introduction will be one of the last sections you write. When deciding on how much context and which definitions to include in this section, remember to look back at your literature review to avoid any repetition. It may be that you can repurpose some of the early paragraphs in the literature review for the introduction.

What is the ‘research aim’?

The research aim is a mission statement, that states the main ambition of your project. in other words, what does your research project hope to achieve you may also express this as the ‘big questions’ that drives your project, or as the research problem that your dissertation will aim to address or solve..

You only need one research aim, and this is likely to change as your dissertation develops through the literature review. Keep returning to your research aim and your aspirations for the project regularly to help shape this statement.

What are the research objectives? How are they different from research questions?

Research objectives and questions are the same thing – the only difference is how they are written! The objectives are the specific tasks that you will need to complete – the stepping stones – that will enable you to achieve your overall research aim.

You will usually have 3-5 research objectives, and their order will hep the reader to understand how you will progress through your research project from start to finish. If you can achieve each objective, or answer each research question, you should meet your research aim! It is therefore important to be specific in your choice of language: verbs, such as ‘to investigate’, ‘to explore’, ‘to assess’ etc. will help your research appear “do-able” (Farrell, 2011).

Here’s an example of three research objectives, also phrased as research questions (this depends entirely on your preference):

For more ideas on how to write research objectives, take at look at this list of common academic verbs for creating specific, achievable research tasks and questions.

We have an  online study guide dedicated to planning and structuring your literature review.

What is the purpose of the methodology section?

The methodology outlines the procedure and process of your data collection. You should therefore provide enough detail so that a reader could replicate or adapt your methodology in their own research.

While the literature review focuses on the views and arguments of other authors, the methodology puts the spotlight on your project. Two of the key questions you should aim to answer in this section are:

• Why did you select the methods you used?
• How do these methods answer your research question(s)?

The methodology chapter should also justify and explain your choice of methodology and methods. At every point where you faced a decision, ask: Why did choose this approach? Why not something else? Why was this theory/method/tool the most relevant or suitable for my project? How did this decision contribute to answering my research questions?

Although most students write their methodology before carrying out their data collection, the methodology section should be written in the past tense, as if the research has already been completed.

What is the difference between my methodology and my methods?

There are three key aspects of any methodology section that you should aim to address:.

• Methodology: Your choice of methodology will be grounded in a discipline-specific theory about how research should proceed, such as quantitative or qualitative. This overarching decision will help to provide rationale for the specific methods you go on to use.  
• Research Design: An explanation of the approach that you have chosen, and the type of data you will collect. For example, case study or action research? Will the data you collect be quantitative, qualitative or a mix of both?  
• Methods: The concrete research tools used to collect and analyse data: questionnaires, in-person surveys, observations etc.

You may also need to include information on epistemology and your philosophical approach to research. You can find more information on this in our research planning guide.

What should I include in the methodology section?

Research paradigm: What is the underpinning philosophy of your research? How does this align with your research aim and objectives?

Methodology : Qualitative or quantitative? Mixed? What are the advantages of your chosen methodology, and why were the other options discounted?

• Research design : Show how your research design is influenced by other studies in your field and justify your choice of approach.  
• Methods : What methods did you use? Why? Do these naturally fit together or do you need to justify why you have used different methods in combination?  
• Participants/Data Sources: What were your sources/who were your participants? Which sampling approach did you use and why? How were they identified as a suitable group to research, and how were they recruited?  
• Procedure : What did you do to collect your data? Remember, a reader should be able to replicate or adapt your methodology in their own research from the information you provide here.  
• Limitations : What are the general limitations of your chosen method(s)? Don’t be specific here about your project (ie. what you could have done differently), but instead focus on what the literature outlines as the disadvantages of your methods.

Should I reflect on my position as a researcher?

If you feel your position as a researcher has influenced your choice of methods or procedure in any way, the methodology is a good place to reflect on this. Positionality acknowledges that no researcher is entirely objective: we are all, to some extent, influenced by prior learning, experiences, knowledge, and personal biases. This is particularly true in qualitative research or practice-based research, where the student is acting as a researcher in their own workplace, where they are otherwise considered a practitioner/professional.

The following questions can help you to reflect on your positionality and gauge whether this is an important section to include in your dissertation (for some people, this section isn’t necessary or relevant):

• How might my personal history influence how I approach the topic?
• How am I positioned in relation to this knowledge? Am I being influenced by prior learning or knowledge from outside of this course?
• How does my gender/social class/ ethnicity/ culture influence my positioning in relation to this topic?
• Do I share any attributes with my participants? Are we part of a s hared community? How might this have influenced our relationship and my role in interviews/observations?
• Am I invested in the outcomes on a personal level? Who is this research for and who will feel the benefits?

Visit our detailed guides on qualitative and quantitative research for more information.

• Quantitative projects
• Qualitative projects

T he purpose of this section is to report the findings of your study. In quantitative research, the results section usually functions as a statement of your findings without discussion.

Results sections generally begin with descriptive statistics before moving on to further tests such as multiple linear regression, or inferential statistical tests such as ANOVA, and any associated Post-Hoc testing.

Here are some top tips for planning/writing your results section:

• Explain any treatments you have applied to your data.
• Present your findings in a logical order.
• Describe trends in the data/anomalous findings but don’t start to interpret them. Save that for your discussion section.
• Figures and tables are usually the clearest way to present information. It is important to remember to title and label any titles/diagrams to communicate their meaning to the reader and so that you can refer to them again later in the report (e.g. Table 1).
• Remember to be consistent with the rounding of figures. If you start by rounding to 2 decimal places, ensure that you do this for all data you report.
• Avoid repeating any information - if something appears in a table it does not need to appear again in the main body of the text.

Presenting qualitative data

In qualitative studies, your results are often presented alongside the discussion, as it is difficult to include this data in a meaningful way without explanation and interpretation. In the dsicussion section, aim to structure your work thematically, moving through the key concepts or ideas that have emerged from your qualitative data. Use extracts from your data collection - interviews, focus groups, observations - to illustrate where these themes are most prominent, and refer back to the sources from your literature review to help draw conclusions. 

Here's an example of how your data could be presented in paragraph format in this section:

Example from  'Reporting and discussing your findings ', Monash University .

What should I include in the discussion section?

The purpose of the discussion section is to interpret your findings and discuss these against the context of the wider literature. This section should also highlight how your research has contributed to the understanding of a phenomenon or problem: this can be achieved by responding to your research questions.

Though the structure of discussion sections can vary, a relatively common structure is offered below:

• State your major findings – this can be a brief opening paragraph that restates the research problem, the methods you used to attempt to address this, and the major findings of your research.
• Address your research questions - detail your findings in relation to each of your research questions to help demonstrate how you have attempted to address the research problem. Answer each research question in turn by interpreting the relevant results: this may involve highlighting patterns, relationships or statistically significant differences depending on the design of your research and how you analysed your data.
• Discuss your findings against the wider literature - this will involve comparing and contrasting your findings against those of others and using key literature to support the interpretation of your results; often, this will involve revisiting key studies from your literature review and discussing where your findings fit in the pre-existing literature. This process can help to highlight the importance of your research through demonstrating what is novel about your findings and how this contributes to the wider understanding of your research area.
• Address any unexpected findings in your study - begin with by stating the unexpected finding and then offer your interpretation as to why this might have occurred. You may relate unexpected findings to other research literature and you should also consider how any unexpected findings relate to your overall study – especially if you think this is significant in terms of what your findings contribute to the understanding of your research problem!
• Discuss alternative interpretations - it’s important to remember that in research we find evidence to support ideas, theories and understanding; nothing is ever proven. Consequently, you should discuss possible alternative interpretations of your data – not just those that neatly answer your research questions and confirm your hypotheses.
• Limitations/weaknesses of your research – acknowledge any factors that might have affected your findings and discuss how this relates to your interpretation of the data. This might include detailing problems with your data collection method, or unanticipated factors that you had not accounted for in your original research plan. Likewise, detail any questions that your findings could not answer and explain why this was the case.
• Future directions (this part of your discussion could also be included in your conclusion) – this section should address what questions remain unanswered about your research problem. For example, it may be that your findings have answered some questions but raised new ones; this can often occur as a result of unanticipated findings. Likewise, some of the limitations of your research may necessitate further work to address a methodological confound or weakness in a tool of measurement. Whatever these future directions are, remember you’re not writing a proposal for this further research; a brief suggestion of what the research should do and how this would address one of the new problems/limitations you have identified is enough.

Here are some final top tips for writing your discussion section:

• Don’t rewrite your results section – remember your goal is to interpret and explain how your findings address the research problem.
• Be clear about what you have found, how this has addressed a gap in the literature and how it changes our understanding of your research problem.
• Structure your discussion in a logical way that highlights your most important/interesting findings first.
• Be careful about how you interpret your data: be wary over-interpreting to confirm a hypothesis. Remember, we can still learn from non-significant research findings.
• Avoid being apologetic or too critical when discussing the limitations of your research. Be concise and analytical. 

How do I avoid repetition in the conclusion?

The conclusion is your opportunity to synthesise everything you have done/written as part of your research, in order to demonstrate your understanding.

A well-structured conclusion is likely to include the following:

• State your conclusions – in clear language, state the conclusions from your research. Crucially, this not just restating your results/findings: instead, this is a synthesis of the research problem, your research questions, your findings (and interpretation), and the relevant research literature. From your conclusions, it should be clear to your reader how our understanding of the research topic has changed.  
• Discuss wider significance – this is your opportunity to highlight (potential) wider implications of your conclusions. Depending on your discipline, this might include recommendations for policy, professional practice or a tentative speculation about how an academic theory might change given your findings. It is important not to over-generalise here; remember the limitations of your theoretical and methodological choices and what these mean for the applicability of your findings/conclusions. If your discipline encourages reflection, this can be a suitable place to include your thoughts about the research process, the choices you made and how your findings/conclusions might influence your professional outlook/practice going forwards.  
• Take home message – this should be a strong and clear final statement that draws the reader’s focus to the primary message of your study. Whilst it’s important to avoid being overly grandiose, this is your closing argument, and you should remind the reader of what your research has achieved.

Ultimately, your conclusion is your final word about the research problem you have investigated; don’t be afraid of emphasising your contribution to the understanding of that problem. Your conclusion should be clear, succinct and provide a summary of everything that has been learned as a result of your research project. 

What supervisors expect from their dissertation students:

• to determine the focus and direction of the dissertation, particularly in terms of identifying a topic of interest and research question.
• to work independently to explore literature and research in the chosen topic area.
• to be proactive in arranging supervision meetings, email draft work before meetings for feedback and prepare specific questions and issues to discuss in supervision time.
• to be honest and open about any challenges or difficulties that arise during the research or writing process.
• to bring a problem-solving approach to the dissertation (you are not expected to know all the answers but should show initiative in exploring possible solutions to any problems that might arise).

What you can expect from your supervisor:

• to offer guidance on the best way to structure and carry out a successful research project in the timescale for your dissertation, and to help you to set achievable and appropriate research objectives.
• ​ to act as an expert in your discipline and sounding board for your ideas, and to advise you on the literature search and theoretical background for your project.
• to serve as a 'lifeline' and point of support when the dissertation feels challenging.
• to read your drafts and give feedback in supervision meetings.
• to offer practical advice and strategies for managing your time, securing ethics approval, collecting data and common pitfalls to avoid during the research process.

Making the most of your supervision meetings

Meeting your supervisor can feel daunting at first but your supervision meetings offer a great opportunity to discuss your research ideas and get feedback on the direction of your project. Here are our top tips to getting the most out of time with your supervisor:  

• Y ou are in charge of the agenda. If you arrange a meeting with your supervisor, you call the shots! Here are a few tips on how to get the most out of the time with your supervisor.
• Send an email in advance of the meeting , with an overview of the key ideas you want to talk about. This can save time in the meeting and helps to give you some structure to follow. If this isn't possible, run through these points quickly when you first sit down as you introduce the meeting - "I wanted to focus on the literature review today, as I'm having some trouble deciding on the order my key themes and points should be introduced in."
• What do you want to get out of the meeting? Note down any questions you would like the answers to or identify what it is you will need from the meeting in order to make progress on the next stage of your dissertation. Supervision meetings offer the change to talk about your ideas for the project, but they can also be an opportunity to find out practical details and troubleshoot. Don't leave the meeting until you have addressed these and got answers/advice in each key area.
• Trust your supervisor. Your supervisor may not be an expert in your chosen subject, but they will have experience of writing up research projects and coaching other dissertation students. You are responsible for reading up on your subject and exploring the literature - your supervisor can't tell you what to read, but they can give you advice on how to read your sources and integrate them into your argument and writing.
• Choose a short section to discuss in the meeting for feedback - for example, if you're not sure on structure, pick a page or two that demonstrate this, or if you want advice on being critical, find an example from a previous essay where you think you did this well and ask your supervisor how to translate this into dissertation writing.
• Agree an action plan . Work with your supervisor to set a goal for your next meeting, or an objective that you will meet in the week following your supervision. Feeling accountable to someone can be a great motivator and also helps you to recognise where you are starting to fall behind the targets that you've set for yourself.
• Be open and honest . It can feel daunting meeting your supervisor, but supervision meetings aren't an interview where you have to prove everything is going well. Ask for help and advice where you need it, and be honest if you're finding things difficult. A supervisor is there to support you and help you to develop the skills and knowledge you need along the journey to submitting your dissertation.
• << Previous: Quantitative research
• Next: e-learning and books >>
• Last Updated: Apr 17, 2024 1:52 PM
• URL: https://libguides.shu.ac.uk/researchprojects

21 Research Objectives Examples (Copy and Paste)

Research objectives refer to the definitive statements made by researchers at the beginning of a research project detailing exactly what a research project aims to achieve.

These objectives are explicit goals clearly and concisely projected by the researcher to present a clear intention or course of action for his or her qualitative or quantitative study. 

Research objectives are typically nested under one overarching research aim. The objectives are the steps you’ll need to take in order to achieve the aim (see the examples below, for example, which demonstrate an aim followed by 3 objectives, which is what I recommend to my research students).

Research Objectives vs Research Aims

Research aim and research objectives are fundamental constituents of any study, fitting together like two pieces of the same puzzle.

The ‘research aim’ describes the overarching goal or purpose of the study (Kumar, 2019). This is usually a broad, high-level purpose statement, summing up the central question that the research intends to answer.

Example of an Overarching Research Aim:

“The aim of this study is to explore the impact of climate change on crop productivity.” 

Comparatively, ‘research objectives’ are concrete goals that underpin the research aim, providing stepwise actions to achieve the aim.

Objectives break the primary aim into manageable, focused pieces, and are usually characterized as being more specific, measurable, achievable, relevant, and time-bound (SMART).

Examples of Specific Research Objectives:

1. “To examine the effects of rising temperatures on the yield of rice crops during the upcoming growth season.” 2. “To assess changes in rainfall patterns in major agricultural regions over the first decade of the twenty-first century (2000-2010).” 3. “To analyze the impact of changing weather patterns on crop diseases within the same timeframe.”

The distinction between these two terms, though subtle, is significant for successfully conducting a study. The research aim provides the study with direction, while the research objectives set the path to achieving this aim, thereby ensuring the study’s efficiency and effectiveness.

How to Write Research Objectives

I usually recommend to my students that they use the SMART framework to create their research objectives.

SMART is an acronym standing for Specific, Measurable, Achievable, Relevant, and Time-bound. It provides a clear method of defining solid research objectives and helps students know where to start in writing their objectives (Locke & Latham, 2013).

Each element of this acronym adds a distinct dimension to the framework, aiding in the creation of comprehensive, well-delineated objectives.

Here is each step:

• Specific : We need to avoid ambiguity in our objectives. They need to be clear and precise (Doran, 1981). For instance, rather than stating the objective as “to study the effects of social media,” a more focused detail would be “to examine the effects of social media use (Facebook, Instagram, and Twitter) on the academic performance of college students.”
• Measurable: The measurable attribute provides a clear criterion to determine if the objective has been met (Locke & Latham, 2013). A quantifiable element, such as a percentage or a number, adds a measurable quality. For example, “to increase response rate to the annual customer survey by 10%,” makes it easier to ascertain achievement.
• Achievable: The achievable aspect encourages researchers to craft realistic objectives, resembling a self-check mechanism to ensure the objectives align with the scope and resources at disposal (Doran, 1981). For example, “to interview 25 participants selected randomly from a population of 100” is an attainable objective as long as the researcher has access to these participants.
• Relevance : Relevance, the fourth element, compels the researcher to tailor the objectives in alignment with overarching goals of the study (Locke & Latham, 2013). This is extremely important – each objective must help you meet your overall one-sentence ‘aim’ in your study.
• Time-Bound: Lastly, the time-bound element fosters a sense of urgency and prioritization, preventing procrastination and enhancing productivity (Doran, 1981). “To analyze the effect of laptop use in lectures on student engagement over the course of two semesters this year” expresses a clear deadline, thus serving as a motivator for timely completion.

You’re not expected to fit every single element of the SMART framework in one objective, but across your objectives, try to touch on each of the five components.

Research Objectives Examples

1. Field: Psychology

Aim: To explore the impact of sleep deprivation on cognitive performance in college students.

• Objective 1: To compare cognitive test scores of students with less than six hours of sleep and those with 8 or more hours of sleep.
• Objective 2: To investigate the relationship between class grades and reported sleep duration.
• Objective 3: To survey student perceptions and experiences on how sleep deprivation affects their cognitive capabilities.

2. Field: Environmental Science

Aim: To understand the effects of urban green spaces on human well-being in a metropolitan city.

• Objective 1: To assess the physical and mental health benefits of regular exposure to urban green spaces.
• Objective 2: To evaluate the social impacts of urban green spaces on community interactions.
• Objective 3: To examine patterns of use for different types of urban green spaces. 

3. Field: Technology

Aim: To investigate the influence of using social media on productivity in the workplace.

• Objective 1: To measure the amount of time spent on social media during work hours.
• Objective 2: To evaluate the perceived impact of social media use on task completion and work efficiency.
• Objective 3: To explore whether company policies on social media usage correlate with different patterns of productivity.

4. Field: Education

Aim: To examine the effectiveness of online vs traditional face-to-face learning on student engagement and achievement.

• Objective 1: To compare student grades between the groups exposed to online and traditional face-to-face learning.
• Objective 2: To assess student engagement levels in both learning environments.
• Objective 3: To collate student perceptions and preferences regarding both learning methods.

5. Field: Health

Aim: To determine the impact of a Mediterranean diet on cardiac health among adults over 50.

• Objective 1: To assess changes in cardiovascular health metrics after following a Mediterranean diet for six months.
• Objective 2: To compare these health metrics with a similar group who follow their regular diet.
• Objective 3: To document participants’ experiences and adherence to the Mediterranean diet.

6. Field: Environmental Science

Aim: To analyze the impact of urban farming on community sustainability.

• Objective 1: To document the types and quantity of food produced through urban farming initiatives.
• Objective 2: To assess the effect of urban farming on local communities’ access to fresh produce.
• Objective 3: To examine the social dynamics and cooperative relationships in the creating and maintaining of urban farms.

7. Field: Sociology

Aim: To investigate the influence of home offices on work-life balance during remote work.

• Objective 1: To survey remote workers on their perceptions of work-life balance since setting up home offices.
• Objective 2: To conduct an observational study of daily work routines and family interactions in a home office setting.
• Objective 3: To assess the correlation, if any, between physical boundaries of workspaces and mental boundaries for work in the home setting.

8. Field: Economics

Aim: To evaluate the effects of minimum wage increases on small businesses.

• Objective 1: To analyze cost structures, pricing changes, and profitability of small businesses before and after minimum wage increases.
• Objective 2: To survey small business owners on the strategies they employ to navigate minimum wage increases.
• Objective 3: To examine employment trends in small businesses in response to wage increase legislation.

9. Field: Education

Aim: To explore the role of extracurricular activities in promoting soft skills among high school students.

• Objective 1: To assess the variety of soft skills developed through different types of extracurricular activities.
• Objective 2: To compare self-reported soft skills between students who participate in extracurricular activities and those who do not.
• Objective 3: To investigate the teachers’ perspectives on the contribution of extracurricular activities to students’ skill development.

10. Field: Technology

Aim: To assess the impact of virtual reality (VR) technology on the tourism industry.

• Objective 1: To document the types and popularity of VR experiences available in the tourism market.
• Objective 2: To survey tourists on their interest levels and satisfaction rates with VR tourism experiences.
• Objective 3: To determine whether VR tourism experiences correlate with increased interest in real-life travel to the simulated destinations.

11. Field: Biochemistry

Aim: To examine the role of antioxidants in preventing cellular damage.

• Objective 1: To identify the types and quantities of antioxidants in common fruits and vegetables.
• Objective 2: To determine the effects of various antioxidants on free radical neutralization in controlled lab tests.
• Objective 3: To investigate potential beneficial impacts of antioxidant-rich diets on long-term cellular health.

12. Field: Linguistics

Aim: To determine the influence of early exposure to multiple languages on cognitive development in children.

• Objective 1: To assess cognitive development milestones in monolingual and multilingual children.
• Objective 2: To document the number and intensity of language exposures for each group in the study.
• Objective 3: To investigate the specific cognitive advantages, if any, enjoyed by multilingual children.

13. Field: Art History

Aim: To explore the impact of the Renaissance period on modern-day art trends.

• Objective 1: To identify key characteristics and styles of Renaissance art.
• Objective 2: To analyze modern art pieces for the influence of the Renaissance style.
• Objective 3: To survey modern-day artists for their inspirations and the influence of historical art movements on their work.

14. Field: Cybersecurity

Aim: To assess the effectiveness of two-factor authentication (2FA) in preventing unauthorized system access.

• Objective 1: To measure the frequency of unauthorized access attempts before and after the introduction of 2FA.
• Objective 2: To survey users about their experiences and challenges with 2FA implementation.
• Objective 3: To evaluate the efficacy of different types of 2FA (SMS-based, authenticator apps, biometrics, etc.).

15. Field: Cultural Studies

Aim: To analyze the role of music in cultural identity formation among ethnic minorities.

• Objective 1: To document the types and frequency of traditional music practices within selected ethnic minority communities.
• Objective 2: To survey community members on the role of music in their personal and communal identity.
• Objective 3: To explore the resilience and transmission of traditional music practices in contemporary society.

16. Field: Astronomy

Aim: To explore the impact of solar activity on satellite communication.

• Objective 1: To categorize different types of solar activities and their frequencies of occurrence.
• Objective 2: To ascertain how variations in solar activity may influence satellite communication.
• Objective 3: To investigate preventative and damage-control measures currently in place during periods of high solar activity.

17. Field: Literature

Aim: To examine narrative techniques in contemporary graphic novels.

• Objective 1: To identify a range of narrative techniques employed in this genre.
• Objective 2: To analyze the ways in which these narrative techniques engage readers and affect story interpretation.
• Objective 3: To compare narrative techniques in graphic novels to those found in traditional printed novels.

18. Field: Renewable Energy

Aim: To investigate the feasibility of solar energy as a primary renewable resource within urban areas.

• Objective 1: To quantify the average sunlight hours across urban areas in different climatic zones. 
• Objective 2: To calculate the potential solar energy that could be harnessed within these areas.
• Objective 3: To identify barriers or challenges to widespread solar energy implementation in urban settings and potential solutions.

19. Field: Sports Science

Aim: To evaluate the role of pre-game rituals in athlete performance.

• Objective 1: To identify the variety and frequency of pre-game rituals among professional athletes in several sports.
• Objective 2: To measure the impact of pre-game rituals on individual athletes’ performance metrics.
• Objective 3: To examine the psychological mechanisms that might explain the effects (if any) of pre-game ritual on performance.

20. Field: Ecology

Aim: To investigate the effects of urban noise pollution on bird populations.

• Objective 1: To record and quantify urban noise levels in various bird habitats.
• Objective 2: To measure bird population densities in relation to noise levels.
• Objective 3: To determine any changes in bird behavior or vocalization linked to noise levels.

21. Field: Food Science

Aim: To examine the influence of cooking methods on the nutritional value of vegetables.

• Objective 1: To identify the nutrient content of various vegetables both raw and after different cooking processes.
• Objective 2: To compare the effect of various cooking methods on the nutrient retention of these vegetables.
• Objective 3: To propose cooking strategies that optimize nutrient retention.

The Importance of Research Objectives

The importance of research objectives cannot be overstated. In essence, these guideposts articulate what the researcher aims to discover, understand, or examine (Kothari, 2014).

When drafting research objectives, it’s essential to make them simple and comprehensible, specific to the point of being quantifiable where possible, achievable in a practical sense, relevant to the chosen research question, and time-constrained to ensure efficient progress (Kumar, 2019). 

Remember that a good research objective is integral to the success of your project, offering a clear path forward for setting out a research design , and serving as the bedrock of your study plan. Each objective must distinctly address a different dimension of your research question or problem (Kothari, 2014). Always bear in mind that the ultimate purpose of your research objectives is to succinctly encapsulate your aims in the clearest way possible, facilitating a coherent, comprehensive and rational approach to your planned study, and furnishing a scientific roadmap for your journey into the depths of knowledge and research (Kumar, 2019). 

Kothari, C.R (2014). Research Methodology: Methods and Techniques . New Delhi: New Age International.

Kumar, R. (2019). Research Methodology: A Step-by-Step Guide for Beginners .New York: SAGE Publications.

Doran, G. T. (1981). There’s a S.M.A.R.T. way to write management’s goals and objectives. Management review, 70 (11), 35-36.

Locke, E. A., & Latham, G. P. (2013). New Developments in Goal Setting and Task Performance . New York: Routledge.

Chris Drew (PhD)

Dr. Chris Drew is the founder of the Helpful Professor. He holds a PhD in education and has published over 20 articles in scholarly journals. He is the former editor of the Journal of Learning Development in Higher Education. [Image Descriptor: Photo of Chris]

• Chris Drew (PhD) https://helpfulprofessor.com/author/chris-drew-phd/ 5 Top Tips for Succeeding at University
• Chris Drew (PhD) https://helpfulprofessor.com/author/chris-drew-phd/ 50 Durable Goods Examples
• Chris Drew (PhD) https://helpfulprofessor.com/author/chris-drew-phd/ 100 Consumer Goods Examples
• Chris Drew (PhD) https://helpfulprofessor.com/author/chris-drew-phd/ 30 Globalization Pros and Cons

Leave a Comment Cancel Reply

Your email address will not be published. Required fields are marked *

Scope and Delimitations in Academic Research

Table of contents

• 1.1 Examples of Elements Included in the Scope
• 2.1 Examples of Delimitations in Research
• 3 Determining the Scope and Delimitation
• 4 Writing the Scope and Delimitations Section
• 5 Conclusion

Understanding the scope and delimitations of a study is crucial for defining its parameters and ensuring focused research efforts. What are delimitations in a research study? These components establish the boundaries within which the research will operate and clarify what the study aims to explore and achieve. This article delves into the significance of clearly defining the scope and every delimitation, how they guide the research focus, and their roles in shaping the research process. Additionally, it provides insights into determining these aspects and articulating them effectively in a research proposal or paper. Transitioning smoothly into the main discussion, let’s explore the importance of scope in research, guiding the focus.

The importance of Clearly Defining the Scope of the Study for Guiding Research Focus

The scope of research delineates its extent or range of inquiry, setting clear parameters for what the study will cover. It’s a foundational aspect that guides every step of the research process, from the formulation of research questions to the interpretation of results. Defining the scope helps in focusing the research efforts, ensuring that the study remains manageable and within realistic bounds.

Understanding the scope and limitation of the study allows researchers to allocate resources efficiently, ensuring that every aspect of the study receives adequate attention. It also helps in avoiding the common pitfall of overreaching, which can dilute the research’s impact and make findings less actionable. By setting a defined scope, researchers can more easily communicate their work’s relevance, limitations and delimitations in the research process to stakeholders, enhancing the credibility and applicability of their findings. Furthermore, a well-defined scope can facilitate a more targeted and effective literature review, laying a solid foundation for the research study.

When navigating the complexities of defining a study’s scope, researchers might seek external support to ensure their research is concise, well-structured, and impactful. A writing service , PapersOwl offers a spectrum tailored to meet academic research’s unique demands. Their expertise can be particularly beneficial in refining research proposals, ensuring the scope is clearly communicated and aligned with academic standards. Engaging with such a service allows researchers to benefit from professional insights, which can enhance the coherence and focus of their work. This collaboration can be instrumental in identifying the most relevant study areas and avoiding unnecessary diversions. With PapersOwl’s support, researchers can ensure their project’s scope is well-defined and compellingly presented, making a strong case for its significance and feasibility. This partnership can be a strategic step towards achieving a study’s specific objectives, ensuring it contributes valuable insights within its defined boundaries.

Examples of Elements Included in the Scope

Defining the scope of a research project is akin to drawing a map for a journey; it outlines the terrain to be explored and the boundaries within which the exploration will occur. This clarity is essential for guiding the research process, ensuring the investigation remains focused and relevant. The scope encompasses various elements, each contributing to the overall direction and integrity of the study. Let’s delve into some of these key elements:

• Research Objectives : The specific aim the study is designed to achieve.
• Geographical Coverage: The physical or virtual locations where the research is conducted.
• Time Frame: The period during which the study takes place, which could range from a few days to several years.
• Subject: The specific topics or issues the research intends to address.
• Population Being Studied: The group of individuals, organizations, or phenomena being investigated.

These components of the scope serve as critical navigational tools in the research journey. They ensure that the study remains grounded in its objectives, relevant to its intended audience or population, and manageable within its temporal and geographical constraints. By carefully defining these elements at the outset, researchers can avoid common pitfalls such as scope creep, where the study’s focus broadens uncontrollably, potentially diluting its impact and significance. A well-defined scope is instrumental in crafting a focused, coherent, and impactful research project.

Role of Delimitations in Qualitative Research

Delimitations in research examples specify the boundaries set by the investigator on what the study will not cover, distinguishing them from limitations, which are potential weaknesses in the study not controlled by the researcher. Delimitations are choices made to narrow the scope of a study, focusing on specific aspects while excluding others. In the intricate tapestry of research design, delimitations play a pivotal role in sharpening the focus and enhancing the clarity of a study. By explicitly stating what the research will not explore, delimitations help prevent the dispersion of the research efforts across too broad an area, thereby increasing the depth and specificity of the investigation. This strategic narrowing allows researchers to concentrate their inquiries on areas most likely to yield impactful insights, making efficient use of available resources and time.

One might wonder how to establish these boundaries effectively without compromising the potential breadth of discovery. Here, the expertise provided by platforms like PapersOwl, particularly their research paper help service, becomes invaluable. Their seasoned professionals can offer guidance on crafting a research design that is both focused and flexible, assisting in identifying and justifying delimitations that enhance the study’s relevance and feasibility. Through such collaboration, researchers can balance the scope and delimitation of the study, ensuring that it remains grounded in its objectives while open to unforeseen insights.

Furthermore, acknowledging delimitations in a research paper demonstrates a researcher’s critical understanding of their study’s context and constraints, enhancing the credibility of their work. It shows a mindful engagement with the research process, recognizing that by setting deliberate boundaries, the study can delve more deeply and meaningfully into its chosen area of inquiry. Thus, when thoughtfully articulated with support from research paper writing help, like that offered by PapersOwl, delimitation in research becomes a testament to the rigor and integrity of its effort.

Examples of Delimitations in Research

Delimitations in research are akin to the guardrails on a highway; they keep the investigation on track and prevent it from veering into less relevant or overly broad territories. Below are some examples of how researchers can apply delimitations to fine-tune their investigations:

• Restricting the Study to Certain Age Groups: Focusing on a specific demographic, such as teenagers or the elderly.
• Geographic Locations: Limiting the research to a particular country, city, or region.
• Specific Periods: Studying a phenomenon during a particular time frame, ignoring other periods.

Setting these research delimitations is not about narrowing the vision of the research, but rather about sharpening its focus. It allows for a more thorough and nuanced exploration of the chosen subjects, leading to more precise findings and general delimitation meaning in research. Delimitations highlight the researcher’s awareness of the study’s scope and commitment to conducting a focused, manageable investigation.

Determining the Scope and Delimitation

Identifying the scope and delimitations of your research involves understanding the research problem deeply and recognizing what is feasible within the constraints of time, resources, and data availability. Strategies for determining these include:

• Reviewing existing literature to identify gaps and opportunities.
• Consulting with experts or advisors to refine research questions.
• Considering data availability and methodological constraints.

Balancing the scope and delimitations involves ensuring the research is neither too broad, unmanageable, nor too narrow, limiting its significance. Crafting a research project that strikes the right balance between breadth and depth is a nuanced task. It requires a researcher to be acutely aware of where their study begins and ends, what it encompasses, and what it intentionally leaves out. This equilibrium is not found in isolation but through a diligent exploration of the field and an understanding of how to best position one’s work within it. A key step in this process is identifying and sourcing relevant literature and data, which can significantly influence the scope of research.

Leveraging resources such as PapersOwl’s guide on how to find sources for research papers can prove invaluable in this phase. This platform provides insights into locating credible and relevant information, ensuring that researchers build their work upon a solid foundation of existing knowledge. By understanding how to navigate the vast, effective ocean of available data, researchers can make informed decisions about the direction and limits of their study. This meticulous preparation is crucial for defining the scope and delimitations and justifying them within the context of the research proposal or paper. It demonstrates a researcher’s commitment to rigor and depth, showing that their choices are informed by a comprehensive understanding of the subject and its existing body of literature.

Writing the Scope and Delimitations Section

Articulating the scope and delimitations in a research paper or proposal is crucial for setting clear expectations. It should clearly define delimitations and what the study will and will not cover, providing a rationale for these choices. Effective wording and structure involve:

• Stating the research objectives and questions upfront.
• Describing the research methodology , data collection methods and analysis.
• Outlining the geographical coverage, time frame, and subject matter.
• Clearly stating the delimitations and the reasons behind them.

The presentation of the scope and delimitations within a research document not only guides the readers through the intentions of the research but also establishes a framework for evaluating the findings. It’s a critical section where transparency and precision are paramount, allowing the audience to grasp the extent of the study and the rationale behind its boundaries. This transparency is essential for the credibility of the research, as it demonstrates a conscious and deliberate effort to focus the investigation and acknowledges the existence of boundaries that the study does not cross.

To ensure clarity and impact, this section should seamlessly integrate with the overall narrative of the research proposal or paper. Researchers are advised to avoid jargon and overly technical language, making the research scope and delimitations accessible to a broader audience. This includes a layperson who may not have deep expertise in the field but an interest in the study’s outcomes. Additionally, it is beneficial to highlight how the defined study scope and delimitations contribute to addressing the research problem, filling knowledge gaps, or exploring uncharted territories.

Moreover, this part of the document offers an opportunity to discuss how the chosen delimitations enhance the study’s focus and depth. By justifying the exclusions, researchers can address potential critiques head-on, reinforcing the methodological choices and underscoring the study’s contribution to the field. This careful articulation ensures that the research is perceived as a well-thought-out endeavor, grounded in a strategic approach to inquiry.

The scope and delimitations of a study are foundational elements that guide the research process, setting clear boundaries and focusing efforts. By defining these aspects clearly, researchers can provide a clear roadmap for their investigation, ensuring that their work is both manageable and relevant. By consciously deciding what to exclude from the study, researchers can intensify their focus on the chosen subject, ensuring that the research efforts are concentrated where they are most needed and can be most effective. These self-imposed boundaries are critical for maintaining the study’s coherence and depth. This clarity not only aids in conducting the research but also in effectively communicating its implications, limits, and outcomes.

Readers also enjoyed

WHY WAIT? PLACE AN ORDER RIGHT NOW!

Just fill out the form, press the button, and have no worries!

We use cookies to give you the best experience possible. By continuing we’ll assume you board with our cookie policy.

Annual Three-Minute Thesis Competition Provides Research Capsule Talks

Creating an elevator pitch from information gleaned through years of specialized research takes clear thinking, precise wording and a flair for presenting to an audience. Just ask the participants of this year’s Three-Minute Thesis (3MT) competition. Ten graduate and doctoral students took part in the contest’s final round last month.  

3MT provides participants with the chance to share details about their research and creative work in a compelling way—within a three-minute time limit. It was first developed by the University of Queensland in Australia and is now held at colleges and universities around the world.   

“3MT forces students to come up with ways to describe their research succinctly to non-specialists in a way that is not just comprehensible, but is also interesting and engaging. That’s a skill set that will pay off on the job market, and even beyond, as far as interacting with the media and others who can help disseminate your work and findings more broadly,” says Glenn Wright, executive director of career and professional development for the Graduate School, who runs the competition.  

Nimisha Thakur

This year’s top winner is Nim isha Thakur , a Ph.D. student in anthropology, whose topic was “ River Song: Riverine Futures Amidst Climate Change on the Brahmaputra Floodplains .” Thakur, a graduate research associate at the South Asia Center in the Maxwell School of Citizenship and Public Affairs , won a 16-inch MacBook Pro M3 and a year membership in the Anthropological Association of America. Thakur also has the chance to represent Syracuse University in the regional 3MT competition hosted by the Northeastern Association of Graduate Schools.   

Qingyang Liu

Qingyang Liu , a Ph.D. student in human developm ent and family science, was named the “People’s Choice” winner by audience vote. Liu conducts research in the SELF Regulation Laboratory in  the David B. Falk College of Sport and Human Dynamics . Her topic was “ Material Hardship’s Influence on Self-Regulation Across Childhood: Which Hardship Truly Matters ?” The prize was a set of Bose noise-cancelling headphones.   

Additional finalists were:   

• Caroline Barraco , master’s student in history, “Authenticity, Commodity and Empire in the Early Modern Spanish Relic Trade”  
• Yener Çağla Çimendereli , Ph.D. student in philosophy, “Nonnative Speaking and Linguistic Justice”  
• Nicholas Croce , Ph.D. student in social science, “America’s Forgotten Labor Colony Experiment”  
• Nardini Jhawar , Ph.D. student in clinical psychology, “Racial Reflections: Examining ADHD Help-Seeking Among Asian American College Students”  
• Matthew D. O’Leary , Ph.D. student in anthropology, “Entangled Frontiers: Capitalism and Artifacts of Power at Fort St. Frédéric”  
• Andrew Ridgeway , Ph.D. student in composition and cultural rhetoric, “Evil We Desire: Akrasia and Conspiracy Rhetoric”  
• Paul Sagoe , Ph.D. student in biomedical engineering, “From Joint Pain to Joy Gain: Delivering Drugs for Osteoarthritis Cure”’  
• Julia Zeh , Ph.D. student in biology, “From Baby Babbles to Masterful Melodies: Investigating Vocal Development in Humpback Whales”  

Judges were Sarah Hamersma, associate professor and director of doctoral studies in public administration and international affairs, and Chung-Chin Eugene Liu, assistant professor of economics, both of the Maxwell School; and Corey Williams, a Syracuse City School District employee and a Common Councilor for Syracuse’s Third District.

Diane Stirling

• University Names 2024-25 Remembrance Scholars Wednesday, April 17, 2024, By News Staff
• Symposium to Explore Significance of 18th-Century Philosopher’s Essay on Perpetual Peace in Today’s World Wednesday, April 17, 2024, By Kathleen Haley
• Men’s Soccer Hosting Spring Break Camp for Local Children Wednesday, April 17, 2024, By John Boccacino
• Barnes Center at The Arch Celebrates 2 Millionth Recreation Visitor Tuesday, April 16, 2024, By News Staff
• Office of Multicultural Advancement Wins National Recognition for Inclusive Excellence Tuesday, April 16, 2024, By Eileen Korey

More In Campus & Community

University names 2024-25 remembrance scholars.

Thirty-five students have been chosen as the 2024-25 Syracuse University Remembrance Scholars. The scholarships, now in their 35th year, were founded as a tribute to—and means of remembering—the students studying in London and Florence through Syracuse University who were killed…

Men’s Soccer Hosting Spring Break Camp for Local Children

Wanting to both give back to the surrounding community and help train the next generation of soccer players, the Syracuse University men’s soccer team is pleased to offer a spring break soccer camp for area children. The half-day camp is…

Barnes Center at The Arch Celebrates 2 Millionth Recreation Visitor

Hitting another record milestone, the Barnes Center at The Arch welcomed its 2 millionth visitor to the recreation and fitness area during the first few weeks of 2024. Opening in Fall 2019, the Barnes Center remains a campus staple for…

Office of Multicultural Advancement Wins National Recognition for Inclusive Excellence

Syracuse University’s Office of Multicultural Advancement has received the prestigious 2024 Alumni Association Inclusive Excellence Award from Insight Into Diversity magazine. This award brings national distinction to the team that supports and advocates for underrepresented alumni and students, raising funds…

Graduate School Presents 39 Outstanding Teaching Assistant Awards

Teaching assistants are essential to the educational enterprise at Syracuse University. To recognize their critical role and their valuable contributions to undergraduate and graduate education, the Graduate School annually presents Outstanding Teaching Assistant awards. The honor cites demonstrated excellence in…

Subscribe to SU Today

If you need help with your subscription, contact [email protected] .

Connect With Us

For the media.