how to write materials in research

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

4 Writing the Materials and Methods (Methodology) Section

The Materials and Methods section briefly describes how you did your research. In other words, what did you do to answer your research question? If there were materials used for the research or materials experimented on you list them in this section. You also describe how you did the research or experiment. The key to a methodology is that another person must be able to replicate your research—follow the steps you take. For example if you used the internet to do a search it is not enough to say you “searched the internet.” A reader would need to know which search engine and what key words you used.

Open this section by describing the overall approach you took or the materials used. Then describe to the readers step-by-step the methods you used including any data analysis performed. See Fig. 2.5 below for an example of materials and methods section.

Writing tips:

• Explain procedures, materials, and equipment used
• Example: “We used an x-ray fluorescence spectrometer to analyze major and trace elements in the mystery mineral samples.”
• Order events chronologically, perhaps with subheadings (Field work, Lab Analysis, Statistical Models)
• Use past tense (you did X, Y, Z)
• Quantify measurements
• Include results in the methods! It’s easy to make this mistake!
• Example: “W e turned on the machine and loaded in our samples, then calibrated the instrument and pushed the start button and waited one hour. . . .”

Technical Writing @ SLCC Copyright © 2020 by Department of English, Linguistics, and Writing Studies at SLCC is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License , except where otherwise noted.

Share This Book

Materials and Methods: 7 Writing Tips

• Peer Review
• Research Process

Here are some tips for writing a good Materials and Methods section, which can lead to reproducibility of your results and credibility in the eyes of reviewers and readers.

Updated on January 2, 2011

One critical aspect of publishing research is describing the methods used in enough detail that the experiments can be reproduced by others. Some manuscripts are rejected because there is insufficient detail in the methods section.

In an editorial for the American Journal of Roentgenology , James Provenzale says, “ One of the more common reasons for rejection of a manuscript is that the reviewers cannot fully understand how the study was conducted. ” However, several journals have page limits or page charges, and the Materials and Methods section can take up valuable space.

For more tips on writing the Materials and Methods section of your manuscript, please see our downloadable white paper, Setting the Scene: Best Practices for Writing Materials and Methods .

What are the most important things to include, and how can you be sure that you're being concise AND sufficiently thorough? Here are seven tips for writing a good Materials and Methods section, which can lead to reproducibility of your results and credibility in the eyes of reviewers and readers. This list is not exhaustive; always remember to check the instructions for authors from your target journal for additional requirements or suggestions.

7 Tips for Writing an Effective Materials and Methods Section in Your Research Manuscript:

1. begin writing the materials and methods while you are performing your experiments..

Writing during the research process will prevent you from forgetting important details and save you time when you begin writing the full manuscript. You can also ask co-authors who performed specific experiments to write the corresponding parts of the Methods section.

2. Start with general information that applies to the entire manuscript and then move on to specific experimental details.

Examples of general information that you could begin with are characteristics of the study population, sources and genotypes of bacterial strains, or descriptions of samples or sample sites. Then, you could share more details about your experiment.

3. Match the order in which methods are described to the order of the results that were generated using those methods.

Also, be sure that each method you used is described, even if it is just a quick sentence (e.g., “Toxin assays were performed as described [reference]”). This practice is helpful for transparency, as well as reproducibility.

4. Always include citations for procedures that have been described previously.

If you made any modifications, be sure to list them.

5. Describe statistical tests as fully as possible.

Give as much information about the tests as possible; just mentioning a t -test is not sufficient for the reader to determine if the correct statistical analysis was performed.

6. Avoid discussing the pros and cons of certain methods or results of any kind.

Save evaluations for different methods for the Discussion section of your paper.

7. To save space, be concise, yet thorough, when listing the equipment you used.

You might consider listing all of your equipment purchased from a single company in one sentence. Or, you could create a flowchart figure of the steps in an important procedure.

Before you finish your manuscript, ask yourself the following questions about your Materials and Methods section to ensure that you have included all important information.

1. Is there sufficient detail so that the experiments can be reproduced?

2. Is there excess information that could be removed without affecting the interpretation of the results?

3. Are all the appropriate controls mentioned?

4. Are all appropriate citations included?

5. Is the source of each reagent listed?

Writing the Materials and Methods can be tedious, but a well-written section can enhance your chances of publication and strengthen your conclusions. If you have further questions, download our free white paper on writing the Materials and Methods section or send us an email . Best of luck with your research!

Ben Mudrak, PhD

See our "Privacy Policy"

Research Paper Writing: 5. Methods / Materials

• 1. Getting Started
• 2. Abstract
• 3. Introduction
• 4. Literature Review
• 5. Methods / Materials
• 6. Results / Analysis
• 7. Discussion
• 8. Conclusion
• 9. Reference

Methods / Materials Overview

These sections of the research paper should be concise. The audience reading the paper will always want to know what materials or methods that were used. The methods and materials may be under subheadings in the section or incorporated together. The main objective for these sections is to provide specialized materials, general procedures, and methods to judge the scientific value of the paper.

What to include in the sections

• Described separately
• Include the chemicals, biological, and any equipment
• Do not include common supplies, such as test tubes, pipette tips, beakers, etc. or standard lab equipment
• Single out sources like a specific type of equipment, enzyme, or a culture
• These should be mentioned in a separate paragraph with its own heading or highlighted in the procedure section if there is one
• Refer to solutions by name and describe
• Describes in detail how the analysis was conducted
• Be brief when presenting methods under the title devoted to a specific technique or groups of procedures
• Simplify and report what the procedure was
• Report the method by name
• Use third person passive voice, and avoid using first person
• Use normal text in these sections
• Avoid informal lists
• Use complete sentences

Example of a Methods Section

Publication Manual of the American Psychological Association Sixth Ed. 2010

• << Previous: 4. Literature Review
• Next: 6. Results / Analysis >>
• Last Updated: Nov 7, 2023 7:37 AM
• URL: https://wiu.libguides.com/researchpaperwriting

Training videos   |   Faqs

Materials and Methods Examples and Writing Tips

Abstract | Introduction | Literature Review | Research question | Materials & Methods | Results | Discussion | Conclusion

In this blog, we look at how to write the materials and methods section of a research paper. In most research papers, the materials and methods section follows the literature review section. This is generally the easiest section to write because you are simply reproducing what you did in your experiments. It is always a good idea to start writing your research paper with the materials and methods section.

1. What is the purpose of the materials and methods section?

Materials and methods should describe how you did your research and detail the experimental procedure. One of the most important things to bear in mind while writing the materials and methods section is that it should have enough detail so that other researchers in your field can replicate your experiments and reproduce your results.  You should provide all the steps in a logical order so that your readers can follow your description easily.

2. Materials and Methods Examples

The structure of the methods section will very much depend on your discipline. If you are not sure about the structure, then the best place to start will be to go through the methods section of some previously published papers from your chosen journal. We will look at some examples of materials and methods structure in different disciplines. 

2.1. Materials & methods example #1 (Engineering paper)

If you are writing an engineering sciences research paper in which you are introducing a new method, your materials and methods section would typically include the following information.

You can start with the top-level summary of the method. You can try to answer these questions. Are you proposing a new method? Or,  Are you using a standard method from the literature?  Or, Are you extending a previously published method? If so, is it your previous work? or work published by a different author?

Then you can talk about the reasons for choosing this method. You can quote previous papers that have used this method successfully to support your arguments. Then, you can talk about the actual implementation details of the methods.

Then you can talk about how the methods were validated to confirm that they are suitable for your research. You can also include information about any pilot or preliminary studies you conducted before the full study. Then you can explain how you propose to test and evaluate the methods to prove that they are better than the existing methods. Here, you can talk about metrics and statistical tests you will be using to evaluate your method.

2.2. Materials & methods example #2 (Measurement paper)

If you are writing a paper that deals with measurements, you would typically include the following information in your materials and methods section.

You can start by talking about the experimental setup. You can try to answer these questions. What equipment was used to perform the measurements? What was the make and the model of the equipment?  How many technicians took the measurements?  How experienced were the technicians?

Then you can talk about the parameters that were measured during the experiment. Then you can talk about the actual measurement procedure. How were the samples prepared for the measurements?  How many measurements were taken? Were the measurements repeated for consistency? Was there a time interval between successive measurements?

Then you can talk about measurement conditions and constraints. Were the measurements performed at room temperature or under special conditions? Were there any practical difficulties while performing the measurements, if so, how did you overcome them?

Most importantly, you must list all the calculations in the form of detailed equations and formulas so that readers know exactly how the data was produced.

2.3. Materials & methods example #3 (Survey questionnaire paper)

If you are writing a survey questionnaire paper , you would typically include the following information in your materials and methods section.

You can start by talking about your participants. Who is your target population? What are their demographics? How did you recruit them?  How did participants provide consent for your study? What sampling method did you use to select the participants?

Then you can talk about the survey type. Was it a phone interview? Was it a personal interview? Was it an online survey? Or, Was it a written survey?

Then you can talk about the questionnaire design. How did you choose the questions? How many questions were there? What type of questions were they? Were they open ended questions, or close ended questions, or rating scale questions, or a mixture of different types of questions?

Then you can talk about how the questionnaire was administered. If it is an online survey, how did you get the questionnaire to the participants? Did you email them? Or did you post the survey forms?

If you are doing a personal interview. How did you conduct the interviews? Was it one to one interview, or was it done in batches, or did you use focus groups? How did the participants behave during the interview?

Then you can talk about questionnaire testing. Did you test your questionnaire before the main study? Did you have to make any changes after initial testing?  Did you have to translate the questionnaire into multiple languages? Then finally you can talk about different types of statistical tests you used to analyze the survey responses.

2.4. Materials & methods example #4 (Medical clinical trial paper)

If you are writing a medical research paper , your materials and methods section would typically include the following information.

You can start by providing information about the study design. Was it a randomized trial, or an observational trial? Was it a prospective study, or a retrospective study? Was the study double-blinded, or single-blinded?

Then, you can talk about how the ethical approval was obtained for the study and clarify if the clinical trial was registered. if so, then provide the registration number.

Then, you can talk about how the participants were recruited for the study, and explain the inclusion and exclusion criteria. Then, you can talk about how the participants were grouped into control and placebo groups, and explain how the medication was administered.

Then, you can talk about what outcomes were measured. What was the primary outcome? What was the secondary outcome? What was the follow up period? You can try to answer these questions. Then you can finish off with some information about the statistical tests you used to analyze the data.

3. Frequently Asked Questions

One of the common mistakes people make is using vague language in materials and methods. Reviewers won’t like it, and they will reject the paper on the basis that the section is not elaborate enough for other researchers to reproduce your experiments.

Make sure you write the materials and methods section in past tense, since you are reporting something that has already happened.

Acronyms & Abbrevations: Try to use acronyms and abbreviations for long method names. Abbreviations and acronyms are a great way to make your writing concise and save time. Define the acronyms and abbreviations during their first occurrence then use the short form in the rest of the text. The common practice is to put the acronym and abbreviations in parentheses after the full term.

Use different layouts: Another problem you are likely to face is that your methods section can sound like manual if you have too much text in it. In particular, if you are dealing with a very complex procedure, the readers might find it dry and tedious. So try to provide some variety to the layout. Try to use bullet points and numberings instead of long paragraphs to make it easy for the readers to understand the procedure. You can use flow diagrams to illustrate the process rather than describing it.

When you are using a standard method that is well described in literature, the standard practice is to reference the paper rather than repeating the entire procedure. You can also provide a brief summary of the procedure in your own words.

For example, you can say something like this, “The details of the procedure have been reported previously in…”, and reference the previous paper. And then, you can follow it up with a brief summary of the method from the previous paper.

If you are extending a previous method, then you can do something like this. You can say that, “Some minor modifications were made to the method described in…” and reference the previous paper.  And then, you can follow it up with the list of refinements you made to the previous method in order to adapt it to your work.

Similar Posts

Literature Review Examples and Writing Tips

In this blog, we will go through many literature review examples and understand different ways to present past literature in your paper.

How to Create a Research Paper Outline?

In this blog we will see how to create a research paper outline and start writing your research paper.

Examples of Good and Bad Research Questions

In this blog, we will look at some examples of good and bad research questions and learn how to formulate a strong research question.

Formulating Strong Research Questions: Examples and Writing Tips

In this blog, we will go through many research question examples and understand how to construct a strong research question for your paper.

Figures and Tables in Research Papers – Tips and Examples

In this blog, we will look at best practices for presenting tables and figures in your research paper.

Research Paper Structure – Main Sections and Parts of a Research Paper

In this blog, we explain various topics and sub-topics to be included under each section of a research paper via word cloud diagrams.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• 3 Share Facebook
• 2 Share Twitter
• 6 Share LinkedIn
• 3 Share Email

When you choose to publish with PLOS, your research makes an impact. Make your work accessible to all, without restrictions, and accelerate scientific discovery with options like preprints and published peer review that make your work more Open.

• PLOS Biology
• PLOS Climate
• PLOS Complex Systems
• PLOS Computational Biology
• PLOS Digital Health
• PLOS Genetics
• PLOS Global Public Health
• PLOS Medicine
• PLOS Mental Health
• PLOS Neglected Tropical Diseases
• PLOS Pathogens
• PLOS Sustainability and Transformation
• PLOS Collections
• How to Write Your Methods

Ensure understanding, reproducibility and replicability

What should you include in your methods section, and how much detail is appropriate?

Why Methods Matter

The methods section was once the most likely part of a paper to be unfairly abbreviated, overly summarized, or even relegated to hard-to-find sections of a publisher’s website. While some journals may responsibly include more detailed elements of methods in supplementary sections, the movement for increased reproducibility and rigor in science has reinstated the importance of the methods section. Methods are now viewed as a key element in establishing the credibility of the research being reported, alongside the open availability of data and results.

A clear methods section impacts editorial evaluation and readers’ understanding, and is also the backbone of transparency and replicability.

For example, the Reproducibility Project: Cancer Biology project set out in 2013 to replicate experiments from 50 high profile cancer papers, but revised their target to 18 papers once they understood how much methodological detail was not contained in the original papers.

What to include in your methods section

What you include in your methods sections depends on what field you are in and what experiments you are performing. However, the general principle in place at the majority of journals is summarized well by the guidelines at PLOS ONE : “The Materials and Methods section should provide enough detail to allow suitably skilled investigators to fully replicate your study. ” The emphases here are deliberate: the methods should enable readers to understand your paper, and replicate your study. However, there is no need to go into the level of detail that a lay-person would require—the focus is on the reader who is also trained in your field, with the suitable skills and knowledge to attempt a replication.

A constant principle of rigorous science

A methods section that enables other researchers to understand and replicate your results is a constant principle of rigorous, transparent, and Open Science. Aim to be thorough, even if a particular journal doesn’t require the same level of detail . Reproducibility is all of our responsibility. You cannot create any problems by exceeding a minimum standard of information. If a journal still has word-limits—either for the overall article or specific sections—and requires some methodological details to be in a supplemental section, that is OK as long as the extra details are searchable and findable .

Imagine replicating your own work, years in the future

As part of PLOS’ presentation on Reproducibility and Open Publishing (part of UCSF’s Reproducibility Series ) we recommend planning the level of detail in your methods section by imagining you are writing for your future self, replicating your own work. When you consider that you might be at a different institution, with different account logins, applications, resources, and access levels—you can help yourself imagine the level of specificity that you yourself would require to redo the exact experiment. Consider:

• Which details would you need to be reminded of? 
• Which cell line, or antibody, or software, or reagent did you use, and does it have a Research Resource ID (RRID) that you can cite?
• Which version of a questionnaire did you use in your survey? 
• Exactly which visual stimulus did you show participants, and is it publicly available? 
• What participants did you decide to exclude? 
• What process did you adjust, during your work? 

Tip: Be sure to capture any changes to your protocols

You yourself would want to know about any adjustments, if you ever replicate the work, so you can surmise that anyone else would want to as well. Even if a necessary adjustment you made was not ideal, transparency is the key to ensuring this is not regarded as an issue in the future. It is far better to transparently convey any non-optimal methods, or methodological constraints, than to conceal them, which could result in reproducibility or ethical issues downstream.

Visual aids for methods help when reading the whole paper

Consider whether a visual representation of your methods could be appropriate or aid understanding your process. A visual reference readers can easily return to, like a flow-diagram, decision-tree, or checklist, can help readers to better understand the complete article, not just the methods section.

Ethical Considerations

In addition to describing what you did, it is just as important to assure readers that you also followed all relevant ethical guidelines when conducting your research. While ethical standards and reporting guidelines are often presented in a separate section of a paper, ensure that your methods and protocols actually follow these guidelines. Read more about ethics .

Existing standards, checklists, guidelines, partners

While the level of detail contained in a methods section should be guided by the universal principles of rigorous science outlined above, various disciplines, fields, and projects have worked hard to design and develop consistent standards, guidelines, and tools to help with reporting all types of experiment. Below, you’ll find some of the key initiatives. Ensure you read the submission guidelines for the specific journal you are submitting to, in order to discover any further journal- or field-specific policies to follow, or initiatives/tools to utilize.

Tip: Keep your paper moving forward by providing the proper paperwork up front

Be sure to check the journal guidelines and provide the necessary documents with your manuscript submission. Collecting the necessary documentation can greatly slow the first round of peer review, or cause delays when you submit your revision.

Randomized Controlled Trials – CONSORT The Consolidated Standards of Reporting Trials (CONSORT) project covers various initiatives intended to prevent the problems of  inadequate reporting of randomized controlled trials. The primary initiative is an evidence-based minimum set of recommendations for reporting randomized trials known as the CONSORT Statement . 

Systematic Reviews and Meta-Analyses – PRISMA The Preferred Reporting Items for Systematic Reviews and Meta-Analyses ( PRISMA ) is an evidence-based minimum set of items focusing  on the reporting of  reviews evaluating randomized trials and other types of research.

Research using Animals – ARRIVE The Animal Research: Reporting of In Vivo Experiments ( ARRIVE ) guidelines encourage maximizing the information reported in research using animals thereby minimizing unnecessary studies. (Original study and proposal , and updated guidelines , in PLOS Biology .) 

Laboratory Protocols Protocols.io has developed a platform specifically for the sharing and updating of laboratory protocols , which are assigned their own DOI and can be linked from methods sections of papers to enhance reproducibility. Contextualize your protocol and improve discovery with an accompanying Lab Protocol article in PLOS ONE .

Consistent reporting of Materials, Design, and Analysis – the MDAR checklist A cross-publisher group of editors and experts have developed, tested, and rolled out a checklist to help establish and harmonize reporting standards in the Life Sciences . The checklist , which is available for use by authors to compile their methods, and editors/reviewers to check methods, establishes a minimum set of requirements in transparent reporting and is adaptable to any discipline within the Life Sciences, by covering a breadth of potentially relevant methodological items and considerations. If you are in the Life Sciences and writing up your methods section, try working through the MDAR checklist and see whether it helps you include all relevant details into your methods, and whether it reminded you of anything you might have missed otherwise.

Summary Writing tips

The main challenge you may find when writing your methods is keeping it readable AND covering all the details needed for reproducibility and replicability. While this is difficult, do not compromise on rigorous standards for credibility!

• Keep in mind future replicability, alongside understanding and readability.
• Follow checklists, and field- and journal-specific guidelines.
• Consider a commitment to rigorous and transparent science a personal responsibility, and not just adhering to journal guidelines.
• Establish whether there are persistent identifiers for any research resources you use that can be specifically cited in your methods section.
• Deposit your laboratory protocols in Protocols.io, establishing a permanent link to them. You can update your protocols later if you improve on them, as can future scientists who follow your protocols.
• Consider visual aids like flow-diagrams, lists, to help with reading other sections of the paper.
• Be specific about all decisions made during the experiments that someone reproducing your work would need to know.

Don’t

• Summarize or abbreviate methods without giving full details in a discoverable supplemental section.
• Presume you will always be able to remember how you performed the experiments, or have access to private or institutional notebooks and resources.
• Attempt to hide constraints or non-optimal decisions you had to make–transparency is the key to ensuring the credibility of your research.
• How to Write a Great Title
• How to Write an Abstract
• How to Report Statistics
• How to Write Discussions and Conclusions
• How to Edit Your Work

The contents of the Peer Review Center are also available as a live, interactive training session, complete with slides, talking points, and activities. …

The contents of the Writing Center are also available as a live, interactive training session, complete with slides, talking points, and activities. …

There’s a lot to consider when deciding where to submit your work. Learn how to choose a journal that will help your study reach its audience, while reflecting your values as a researcher…

Vous l’avez sans doute déjà repéré : sur la plateforme OpenEdition Books, une nouvelle interface vient d’être mise en ligne. En cas d’anomalies au cours de votre navigation, vous pouvez nous les signaler par mail à l’adresse feedback[at]openedition[point]org.

Français FR

Ressources numériques en sciences humaines et sociales

Nos plateformes

Bibliothèques

Suivez-nous

Redirection vers OpenEdition Search.

• Open Book Publishers ›
• OBP collection ›
• Writing and Publishing Scientific Paper... ›
• Part II. Writing the paper ›
• 10. How to Write the Material and Metho...
• Open Book Publishers

Writing and Publishing Scientific Papers

Ce livre est recensé par

10. How to Write the Material and Methods Section

Plan détaillé, texte intégral.

1 Although traditionally, this section is only called “Material and Methods” (rarely: Study Site, Material and Methods), it can be composed of the following parts: study site, study organism, material, methods, statistical evaluation.

2 The aim of this section in scientific papers is to enable readers to assess the reliability of your work, and to be able to repeat it for verification if they want to do so. Science is about unearthing nature’s laws, and the cornerstone of the scientific method requires that experiments are repeatable: if the experiment is repeated under the same conditions, the same result should be obtained. A material and methods section should give enough detail to evaluate and, if needed, to repeat the experiments reported in the article.

3 You should carefully consider your potential readership. This allows you to provide enough, but not superfluous, information. Once you have reflected on what can be assumed as known by this readership about your setting, organisms, methods, etc., you can give detail accordingly: not too little, and not too much.

4 During peer review, this section is closely scrutinised. If the reviewer is in any doubt that the experiments are repeatable, or that the methods are appropriate, the manuscript will be rejected as unreliable, no matter how wonderful the findings are.

5 When describing your study site, consider your potential readership and give details accordingly (geographical particulars, history of the site, location, co-ordinates, maps). The aim is not to enable the reader to find your sampling plot, but to give a general understanding, a “feel” for the environment you worked in. Information on habitat, with photos, maps, drawings, is often useful, or wholly necessary.

Study Organism

6 Here, you should name all the species, strains, cultivars or races that were used in the experiments. You should also give precise information on their origin, storage or husbandry, including temperatures, photoperiod, feeding regimes, control, etc. Depending on the readership, you should consider giving other background information on life history, and the organism’s distribution in nature. If there is a long list of organisms or strains, consider preparing a table with this information.

7 Here, you should list all the materials necessary for your experiments. Give exact names, not generic or trade names, of chemicals used. Give a source (manufacturer with location) if the chemical in question is delicate (e.g. an enzyme), or rare, or its quality is critical. This would give additional information to the reader. This is, however, neither advertisement nor endorsement (for legal reasons, this should often be made explicit in the paper — see, e.g. the US public organisation policy: disclaimer: “The mention of any trade name does not constitute endorsement by XXX organisation”). For equipment used, give the name, specification/type, manufacturer, and conditions of use.

Sampling Methods and Measurements

8 Here, you should detail the procedures: how did you perform the observations, measurements, experiments? How many times, under what conditions? If you use a new method, give all the details necessary so that the reader can repeat your experiment from reading this section. If you used a published method, a reference to the original publication, preferably the one that first published the method, is usually sufficient with minimum description. If you modified a published method, detail the modification only. If the method is published, you should cite it — but consider where it was published? Is it a frequently used method? When was it published? A rarely-used method, published long ago in an obscure journal, needs a more detailed description than a much-used, current one. If the original publication is not widely available, you will have to provide detailed description. Editors often welcome more detail, especially if the published method is not in very wide use (with the appropriate reference, naturally). If you modified a published method that is widely available, detail the modification only.

9 When describing the procedure, be aware that only SI (Système International) units of measurement are allowed. A few units in common use are not official SI measurements and they cannot be used. Also, be aware of the precise use of measurement units — for example, in common use, weight is often given as grams, kilograms, etc., but these are units of mass, not of weight.

10 Any larger set of samples, measurements, or experiments will have the occasional error, a missing sample, a lost or mislaid tube. Do not keep silent about them. Indicate, clearly, how you dealt with errors, missing data, missing traps. This will not decrease your credibility — on the contrary.

Evaluation Methods/Statistics

11 Data will mostly be evaluated by using a statistical program. In most cases, a reference to the program (indicate the version used) is sufficient; give detail only if the method used is new. However, avoid the neophyte description: what’s new for you may not be new for readers. An experienced colleague can give advice on this matter. In general, it is always a good idea to discuss your chosen statistical method with others. Here, you should give a reason for the choice of statistical test, as well as stating how you tested the eventual conditions for using the chosen test (testing for assumptions for a given statistical test). The mention of the use of a commercial statistical program naturally assumes that you have valid access to the program in question. It is not unheard of program developers to search for the mention of their product in the literature to find out about illegal use.

12 Be careful with details when writing a material and methods section — your reputation is on the line! The reader was not by your side when the studies were done, so she will use the detail and clarity of this section as an indirect indication of your reliability and thoroughness.

13 A common error in this section is not offering enough detail. This does not happen because of the authors’ desire to hide anything — it is simply a mark of routine: many parts of the experimental protocol may become almost routine, and the small details are forgotten as they never change and are taken for granted. When the description is prepared, these details, vital for others, are often not included. A good test is whether a colleague, on reading the section, thinks she can repeat the experiment based on the given description of methods. Such a check is useful, because the writer often is too close to the methods, having done them countless times during the experimental process and, thus, omits some obvious but important, detail.

14 Specifically, take care with numbers, spelling, and punctuation. In this section, many “strange” names will occur: of chemicals, organisms, strains; concentrations, times and units of measurement are important. Meticulousness is the key word here: if you cannot be trusted to do simple things well, such as describing a method that you used hundreds of times, can you expect the readers to trust you when it comes to more significant and complicated aspects of reporting your research?

15 The order of description should be chronological; the description of what was done first should precede the later actions. However, you have to first mention all study sites, then all organisms, followed by a full list of all materials used, experiment-by-experiment and so on. Thus, if someone is only interested in all the details of, for example, your second experiment, she will have to jump from one part of this section to another. This seems a small price to pay for a consistent structure, which is followed by most journals.

16 This section describes your own work and, thus, the past tense is used, mostly, in this section. When describing the details, beware of the syntax. The following description is taken from Day and Gastel’s book (Day and Gastel, 2006), who, tongue-in-cheek, called it “the painful method”: “After standing in hot water for an hour, the flasks were examined”. I hope this was not performed as the sentence implies — probably the flasks, and not the researchers, were standing in hot water that long.

When to Write this Section?

17 It is best to start writing this section first, possibly even while working on the experiments. Otherwise, many details will be lost. Details and precision are vital here, and they are much easier to document during the work, or soon after, than weeks or months later. Additionally, there is often a practical reason, too. Most scientific work is done in teams; it is much easier to convince the team members to write their respective methods section while they are doing the work, or soon afterwards. Once the experiments are completed, and the team moves on to further projects, writing a complete methods section will take longer, and be done less satisfactorily.

18 Meticulousness pays, because, as stated above, reviewers are often of the opinion that if you cannot be trusted in doing simple things, you cannot expect trust in significant and complicated aspects of research. Science, in the view of many of its eminent practitioners is, after all, “99 % perspiration and 1 % inspiration”, so precise work, and the ability to describe things accurately, is a necessary condition of credibility. Science may well comprise a lot of precise work and fewer grand ideas; you prove your mastery of the methods applied by being able to describe them with clarity, in sufficient detail.

Le texte seul est utilisable sous licence Creative Commons - Attribution 4.0 International - CC BY 4.0 . Les autres éléments (illustrations, fichiers annexes importés) sont « Tous droits réservés », sauf mention contraire.

Altering Eye

Contemporary International Cinema

Robert Phillip Kolker

Les Bienveillantes de Jonathan Littell

Murielle Lucie Clément (dir.)

The End of the World

Apocalypse and its Aftermath in Western Culture

Maria Manuel Lisboa

Economic Fables

Ariel Rubinstein

Coleridge’s Laws

A Study of Coleridge in Malta

Barry Hough et Howard Davis

Brownshirt Princess

A Study of the “Nazy Conscience”

Lionel Gossman

The End and the Beginning

The Book of My Life

Hermynia Zur Mühlen

Bourdieu and Literature

John R. W. Speller

Telling Tales

The Impact of Germany on English Children’s Books 1780-1918

David Blamires

That Greece Might Still Be Free

The Philhellenes in the War of Independence

William St Clair

The Theatre of Shelley

Jacqueline Mulhallen

Henry James's Europe

Heritage and Transfer

Dennis Tredy, Annick Duperray et Adrian Harding

Accès ouvert freemium

PDF du chapitre

Édition imprimée

Merci, nous transmettrons rapidement votre demande à votre bibliothèque.

Vérifiez si votre bibliothèque a déjà acquis ce livre : authentifiez-vous à OpenEdition Freemium for Books . Vous pouvez suggérer à votre bibliothèque d’acquérir un ou plusieurs livres publiés sur OpenEdition Books. N’hésitez pas à lui indiquer nos coordonnées : access[at]openedition.org Vous pouvez également nous indiquer, à l’aide du formulaire suivant, les coordonnées de votre bibliothèque afin que nous la contactions pour lui suggérer l’achat de ce livre. Les champs suivis de (*) sont obligatoires.

Veuillez, s’il vous plaît, remplir tous les champs.

La syntaxe de l’email est incorrecte.

Le captcha ne correspond pas au texte.

Ce livre est diffusé en accès ouvert freemium. L’accès à la lecture en ligne est disponible. L’accès aux versions PDF et ePub est réservé aux bibliothèques l’ayant acquis. Vous pouvez vous connecter à votre bibliothèque à l’adresse suivante : https://freemium.openedition.org/oebooks

Si vous avez des questions, vous pouvez nous écrire à access[at]openedition.org

Référence numérique du chapitre

Référence numérique du livre

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• J Indian Soc Periodontol
• v.26(3); May-Jun 2022

Materials and method: The “Recipe” of a research

Ashish kumar.

Editor, Journal of Indian Society of Periodontology, Professor and Head, Department of Periodontics, Dental College, Regional Institute of Medical Sciences (RIMS), Lamphelpat, Imphal-795004, Manipur, India. E-mail: moc.liamffider@79ramukhsihsa

In any research article, the detailed description and process of an experiment is provided in the section termed as “Materials and Method.” The Materials and Method section is also called Method section in few journals. This section describes how the experiment was conducted to arrive at the results. The aim of this section in any research article is to describe the process in detail for “reproducibility” which means that procedure of the experiment and related materials should be adequately described so that the other researchers working on the similar topic/area, should be able to conduct a similar experiment and replicate the results to allow corroboration of the inferences of the research. The reproducibility of the results is crucial for their scientific merit.[ 1 ] This section has been equated to “recipe section” which describes what to use, how much to use and how to use to come to the final product.[ 2 ]

Vital details of the research need to be described in this section. At the beginning of the section, the study design needs a description in terms of well-defined commonly used nomenclature (longitudinal, cross-over study”, “randomised controlled trial”, etc). The mention of the study design in the initial part of materials and method section is important as it helps the readers understand the research based on the merits and limitations of study design. The inclusion of study designs also help in understanding the type of statistical tests that can be appropriately applied in evaluating the data.[ 3 ] Randomisation being a crucial aspect of many clinical studies, has to be defined clearly.

The information about sample size, inclusion and exclusion criteria (sample characteristics) also should find a description in this aspect of the material and method section. An adequate sample size of a study would be able to provide the precision of our estimates and thus have adequate power of study to draw conclusions and justify answers to query being explored in the research.[ 3 ] The information of the sample characteristics is important to accomplish the aims of the experiment (hypothesis). Apart from this, the details of the approval from ethical board and trial registration should be mentioned here.[ 4 ]

The next aspect of Materials and Method should incorporate the description of materials in terms of quantity, precise technical descriptions and the method of preparations, if any. The details of the manufacturers of chemical reagents and equipment should also find a mention here. Generic names should be preferred over trade names. If study has usage of microorganisms or experimental animals, a clear description of such entities in terms of species/strains or genus species is required.[ 5 ]

The description of the method of the experiment should be accurate, concise but complete. The process should be written as a explanation of a process, not as a laboratory manual procedure. If the methods, devices, or techniques which have been used by authors, are in routine usage, and are widely known and published, then such methods do not require detailed description. But the authors should compulsorily mention the original article or references from where the readers can get information about the method in detail to replicate the procedure. If any treatment is being investigated, then exact treatment protocol should be described. Techniques/method which are new or uncommon should be explained fully and any related references should also be mentioned.

The statistical aspects should mention the statistical tests and the statistical computer packages that were used for data analysis. Use of an uncommon statistical test needs an explanation of its usage in the context of the study and a reference to the method for readers to refer.[ 5 ]

The material and method section may or may not have subheadings, depending upon the journal guidelines. The subdivisions can be: Study design, setting, subjects, data collection and data analysis[ 2 ] or overall design of the study, inclusion and exclusion criteria, sample sizes and statistical power.[ 6 ]

It is of paramount importance that a consistency is maintained between the “Materials and Method” section and “Results” section of the article. Procedures described in Methods section should correlate with the results described in the Results section for readers to understand the association of the specific methodology to results.[ 4 ]

Often, few issues arise while writing Materials and Method like inclusion of unnecessary details or results. Limitations on number of references that can be cited in journals, many times, leads to this section being extremely concise and lacks details required for the “reproducibility”.[ 7 ] The details of the procedure are not completely mentioned by authors sometimes because of commercial reasons.[ 7 ] These situations result in compromise with the basic principle of “reproducibility” while writing this section.

In certain cases, the authors are apprehensive of results being reproduced and validity of their results being challenged. To avoid any questions being raised on the methodology and results, the authors provide insufficient details in this section to avoid reproducibility.[ 7 ]

The aim of any research is progression of knowledge in that particular field. One of the essential requirement for progression of scientific knowledge is “reproducibility” and the assessment of the validity of available results. This is achievable only if the authors provide sufficient details in the “Materials and Method section”.[ 7 ]

Writing this section should be simple and easy especially when this part is written after the completion of the study, as the authors would have performed the experiment themselves. This is one of the first sections written while writing a research article.

“History has repeatedly shown that when a new method or material becomes available, new uses for it arise.”

Wilson Greatbatch

• Bipolar Disorder
• Therapy Center
• When To See a Therapist
• Types of Therapy
• Best Online Therapy
• Best Couples Therapy
• Best Family Therapy
• Managing Stress
• Sleep and Dreaming
• Understanding Emotions
• Self-Improvement
• Healthy Relationships
• Student Resources
• Personality Types
• Guided Meditations
• Verywell Mind Insights
• 2024 Verywell Mind 25
• Mental Health in the Classroom
• Editorial Process
• Meet Our Review Board
• Crisis Support

How to Write a Methods Section for a Psychology Paper

Tips and Examples of an APA Methods Section

Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Emily is a board-certified science editor who has worked with top digital publishing brands like Voices for Biodiversity, Study.com, GoodTherapy, Vox, and Verywell.

Verywell / Brianna Gilmartin 

The methods section of an APA format psychology paper provides the methods and procedures used in a research study or experiment . This part of an APA paper is critical because it allows other researchers to see exactly how you conducted your research.

Method refers to the procedure that was used in a research study. It included a precise description of how the experiments were performed and why particular procedures were selected. While the APA technically refers to this section as the 'method section,' it is also often known as a 'methods section.'

The methods section ensures the experiment's reproducibility and the assessment of alternative methods that might produce different results. It also allows researchers to replicate the experiment and judge the study's validity.

This article discusses how to write a methods section for a psychology paper, including important elements to include and tips that can help.

What to Include in a Method Section

So what exactly do you need to include when writing your method section? You should provide detailed information on the following:

• Research design
• Participants
• Participant behavior

The method section should provide enough information to allow other researchers to replicate your experiment or study.

Components of a Method Section

The method section should utilize subheadings to divide up different subsections. These subsections typically include participants, materials, design, and procedure.

Participants 

In this part of the method section, you should describe the participants in your experiment, including who they were (and any unique features that set them apart from the general population), how many there were, and how they were selected. If you utilized random selection to choose your participants, it should be noted here.

For example: "We randomly selected 100 children from elementary schools near the University of Arizona."

At the very minimum, this part of your method section must convey:

• Basic demographic characteristics of your participants (such as sex, age, ethnicity, or religion)
• The population from which your participants were drawn
• Any restrictions on your pool of participants
• How many participants were assigned to each condition and how they were assigned to each group (i.e., randomly assignment , another selection method, etc.)
• Why participants took part in your research (i.e., the study was advertised at a college or hospital, they received some type of incentive, etc.)

Information about participants helps other researchers understand how your study was performed, how generalizable the result might be, and allows other researchers to replicate the experiment with other populations to see if they might obtain the same results.

In this part of the method section, you should describe the materials, measures, equipment, or stimuli used in the experiment. This may include:

• Testing instruments
• Technical equipment
• Any psychological assessments that were used
• Any special equipment that was used

For example: "Two stories from Sullivan et al.'s (1994) second-order false belief attribution tasks were used to assess children's understanding of second-order beliefs."

For standard equipment such as computers, televisions, and videos, you can simply name the device and not provide further explanation.

Specialized equipment should be given greater detail, especially if it is complex or created for a niche purpose. In some instances, such as if you created a special material or apparatus for your study, you might need to include an illustration of the item in the appendix of your paper.

In this part of your method section, describe the type of design used in the experiment. Specify the variables as well as the levels of these variables. Identify:

• The independent variables
• Dependent variables
• Control variables
• Any extraneous variables that might influence your results.

Also, explain whether your experiment uses a  within-groups  or between-groups design.

For example: "The experiment used a 3x2 between-subjects design. The independent variables were age and understanding of second-order beliefs."

The next part of your method section should detail the procedures used in your experiment. Your procedures should explain:

• What the participants did
• How data was collected
• The order in which steps occurred

For example: "An examiner interviewed children individually at their school in one session that lasted 20 minutes on average. The examiner explained to each child that he or she would be told two short stories and that some questions would be asked after each story. All sessions were videotaped so the data could later be coded."

Keep this subsection concise yet detailed. Explain what you did and how you did it, but do not overwhelm your readers with too much information.

Tips for How to Write a Methods Section

In addition to following the basic structure of an APA method section, there are also certain things you should remember when writing this section of your paper. Consider the following tips when writing this section:

• Use the past tense : Always write the method section in the past tense.
• Be descriptive : Provide enough detail that another researcher could replicate your experiment, but focus on brevity. Avoid unnecessary detail that is not relevant to the outcome of the experiment.
• Use an academic tone : Use formal language and avoid slang or colloquial expressions. Word choice is also important. Refer to the people in your experiment or study as "participants" rather than "subjects."
• Use APA format : Keep a style guide on hand as you write your method section. The Publication Manual of the American Psychological Association is the official source for APA style.
• Make connections : Read through each section of your paper for agreement with other sections. If you mention procedures in the method section, these elements should be discussed in the results and discussion sections.
• Proofread : Check your paper for grammar, spelling, and punctuation errors.. typos, grammar problems, and spelling errors. Although a spell checker is a handy tool, there are some errors only you can catch.

After writing a draft of your method section, be sure to get a second opinion. You can often become too close to your work to see errors or lack of clarity. Take a rough draft of your method section to your university's writing lab for additional assistance.

A Word From Verywell

The method section is one of the most important components of your APA format paper. The goal of your paper should be to clearly detail what you did in your experiment. Provide enough detail that another researcher could replicate your study if they wanted.

Finally, if you are writing your paper for a class or for a specific publication, be sure to keep in mind any specific instructions provided by your instructor or by the journal editor. Your instructor may have certain requirements that you need to follow while writing your method section.

Frequently Asked Questions

While the subsections can vary, the three components that should be included are sections on the participants, the materials, and the procedures.

• Describe who the participants were in the study and how they were selected.
• Define and describe the materials that were used including any equipment, tests, or assessments
• Describe how the data was collected

To write your methods section in APA format, describe your participants, materials, study design, and procedures. Keep this section succinct, and always write in the past tense. The main heading of this section should be labeled "Method" and it should be centered, bolded, and capitalized. Each subheading within this section should be bolded, left-aligned and in title case.

The purpose of the methods section is to describe what you did in your experiment. It should be brief, but include enough detail that someone could replicate your experiment based on this information. Your methods section should detail what you did to answer your research question. Describe how the study was conducted, the study design that was used and why it was chosen, and how you collected the data and analyzed the results.

Erdemir F. How to write a materials and methods section of a scientific article ? Turk J Urol . 2013;39(Suppl 1):10-5. doi:10.5152/tud.2013.047

Kallet RH. How to write the methods section of a research paper . Respir Care . 2004;49(10):1229-32. PMID: 15447808.

American Psychological Association.  Publication Manual of the American Psychological Association  (7th ed.). Washington DC: The American Psychological Association; 2019.

American Psychological Association. APA Style Journal Article Reporting Standards . Published 2020.

By Kendra Cherry, MSEd Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

Materials & Methods

Characteristics of materials & methods.

• Tells the reader how the research was conducted.
• This section is used by other scientists as a guide to reproduce and critically evaluate the research.  
• Provides detailed information about the techniques, methods, instruments and equipment used in the research.  
• Tells the reader who conducted the research, how data was collected, when and where work was completed.  
• Gives information about the materials that were used in the experiments.

The Materials and Methods section appears in the poster immediately after the Introduction section.   It contains all the information needed to understand how data was collected, which instrument or equipment was used to collect data, what method or technique was used to conduct the research, when the work was conducted, who conducted the research, where the research was conducted, what material (e.g., chemical compound, organism, molecule, mineral) was used in the experiments and how or where the material was obtained.   This information is important so that (1) the audience can understand how the research was conducted and (2) so that another scientist can attempt to reproduce the results.   Reproducibility is a key component of the scientific process and a way that scientists can create new knowledge and understanding in their field.

The Materials and Methods section is matter-of-fact and simply states the facts of the research.   For example, an author might explain how samples were collected from a field site:   “One week after the August 2018 forest fire, 165 soil samples were collected from a depth of 0-5 cm at the White Wolf Campsite in Yosemite National Park.   The samples were packed in ice, transported to the laboratory and then stored at -20 o C until processing.   Samples were separated by size using a Wildco 78-700 Sieve Set (63 micron to 4000 micro, Cole-Parmer) and Meinzer II Sieve Shaker (Fisher Scientific).”  

These sentences contain detailed information about where the samples were collected (i.e., Yosemite National Park, White Wolf Campsite) when (i.e., 1 week after the August 2018 fire) and how the samples were collected (i.e., at a depth of 0-5 cm) and handled (i.e., soil samples were stored frozen until they were separated by size using a sieve set and shaker).   This is the type of information that should be contained in the Materials & Methods section of a poster.        

Figure 6. Example of a Methods & Materials Figure

The Materials and Methods section may contain a figure(s) that describes the research in more detail by showing the reader a photograph, diagram or equipment that was used for experiments ( Fig. 6 ).   Often times it is easier for the reader to understand how research was conducted or how data was collected when they have a figure to look at and study.   Figure 6 shows how the scientist collected samples from a freshwater lake ( Fig 6C ).   The figure shows the location of the Pavilion Lake on a map ( Fig 6A ) and a photograph of the lake ( Fig 6B ) where samples were collected.   Figure 6D shows the equipment that was used in the research and a photograph of the organism that the scientists were studying.  

When describing a particular technique or method you should always provide a citation for the reference(s) that describes the technique or method in detail.   This way your reader will be able to find detailed information about how experiments were conducted.   You will be limited in the amount of information that can be provided in your Materials and Methods section because you will use 20-point font size or larger larger on your poster.   You will also want to leave plenty of space on your poster for figures and tables because these are very important visual tools that you can use to describe your research to the audience.      

Scientific Posters: A Learner's Guide Copyright © 2020 by Ella Weaver; Kylienne A. Shaul; Henry Griffy; and Brian H. Lower is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License , except where otherwise noted.

Share This Book

How to write a materials and methods section of a scientific article?

Affiliation.

• 1 Department of Urology, Faculty of Medicine, Gaziosmanpaşa University, Tokat, Turkey.
• PMID: 26328129
• PMCID: PMC4548564
• DOI: 10.5152/tud.2013.047

In contrast to past centuries, scientific researchers have been currently conducted systematically in all countries as part of an education strategy. As a consequence, scientists have published thousands of reports. Writing an effective article is generally a significant problem for researchers. All parts of an article, specifically the abstract, material and methods, results, discussion and references sections should contain certain features that should always be considered before sending a manuscript to a journal for publication. It is generally known that the material and methods section is a relatively easy section of an article to write. Therefore, it is often a good idea to begin by writing the materials and methods section, which is also a crucial part of an article. Because "reproducible results" are very important in science, a detailed account of the study should be given in this section. If the authors provide sufficient detail, other scientists can repeat their experiments to verify their findings. It is generally recommended that the materials and methods should be written in the past tense, either in active or passive voice. In this section, ethical approval, study dates, number of subjects, groups, evaluation criteria, exclusion criteria and statistical methods should be described sequentially. It should be noted that a well-written materials and methods section markedly enhances the chances of an article being published.

Keywords: Article; material; methods; publication.

How to Write a Research Paper 

• Smodin Editorial Team
• Updated: May 17, 2024

Most students hate writing research papers. The process can often feel long, tedious, and sometimes outright boring. Nevertheless, these assignments are vital to a student’s academic journey. Want to learn how to write a research paper that captures the depth of the subject and maintains the reader’s interest? If so, this guide is for you.

Today, we’ll show you how to assemble a well-organized research paper to help you make the grade. You can transform any topic into a compelling research paper with a thoughtful approach to your research and a persuasive argument.

In this guide, we’ll provide seven simple but practical tips to help demystify the process and guide you on your way. We’ll also explain how AI tools can expedite the research and writing process so you can focus on critical thinking.

By the end of this article, you’ll have a clear roadmap for tackling these essays. You will also learn how to tackle them quickly and efficiently. With time and dedication, you’ll soon master the art of research paper writing.

Ready to get started?

What Is a Research Paper?

A research paper is a comprehensive essay that gives a detailed analysis, interpretation, or argument based on your own independent research. In higher-level academic settings, it goes beyond a simple summarization and includes a deep inquiry into the topic or topics.

The term “research paper” is a broad term that can be applied to many different forms of academic writing. The goal is to combine your thoughts with the findings from peer-reviewed scholarly literature.

By the time your essay is done, you should have provided your reader with a new perspective or challenged existing findings. This demonstrates your mastery of the subject and contributes to ongoing scholarly debates.

7 Tips for Writing a Research Paper

Often, getting started is the most challenging part of a research paper. While the process can seem daunting, breaking it down into manageable steps can make it easier to manage. The following are seven tips for getting your ideas out of your head and onto the page.

1. Understand Your Assignment

It may sound simple, but the first step in writing a successful research paper is to read the assignment. Sit down, take a few moments of your time, and go through the instructions so you fully understand your assignment.

Misinterpreting the assignment can not only lead to a significant waste of time but also affect your grade. No matter how patient your teacher or professor may be, ignoring basic instructions is often inexcusable.

If you read the instructions and are still confused, ask for clarification before you start writing. If that’s impossible, you can use tools like Smodin’s AI chat to help. Smodin can help highlight critical requirements that you may overlook.

This initial investment ensures that all your future efforts will be focused and efficient. Remember, thinking is just as important as actually writing the essay, and it can also pave the wave for a smoother writing process.

2. Gather Research Materials

Now comes the fun part: doing the research. As you gather research materials, always use credible sources, such as academic journals or peer-reviewed papers. Only use search engines that filter for accredited sources and academic databases so you can ensure your information is reliable.

To optimize your time, you must learn to master the art of skimming. If a source seems relevant and valuable, save it and review it later. The last thing you want to do is waste time on material that won’t make it into the final paper.

To speed up the process even more, consider using Smodin’s AI summarizer . This tool can help summarize large texts, highlighting key information relevant to your topic. By systematically gathering and filing research materials early in the writing process, you build a strong foundation for your thesis.

3. Write Your Thesis

Creating a solid thesis statement is the most important thing you can do to bring structure and focus to your research paper. Your thesis should express the main point of your argument in one or two simple sentences. Remember, when you create your thesis, you’re setting the tone and direction for the entire paper.

Of course, you can’t just pull a winning thesis out of thin air. Start by brainstorming potential thesis ideas based on your preliminary research. And don’t overthink things; sometimes, the most straightforward ideas are often the best.

You want a thesis that is specific enough to be manageable within the scope of your paper but broad enough to allow for a unique discussion. Your thesis should challenge existing expectations and provide the reader with fresh insight into the topic. Use your thesis to hook the reader in the opening paragraph and keep them engaged until the very last word.

4. Write Your Outline

An outline is an often overlooked but essential tool for organizing your thoughts and structuring your paper. Many students skip the outline because it feels like doing double work, but a strong outline will save you work in the long run.

Here’s how to effectively structure your outline.

• Introduction: List your thesis statement and outline the main questions your essay will answer.
• Literature Review: Outline the key literature you plan to discuss and explain how it will relate to your thesis.
• Methodology: Explain the research methods you will use to gather and analyze the information.
• Discussion: Plan how you will interpret the results and their implications for your thesis.
• Conclusion: Summarize the content above to elucidate your thesis fully.

To further streamline this process, consider using Smodin’s Research Writer. This tool offers a feature that allows you to generate and tweak an outline to your liking based on the initial input you provide. You can adjust this outline to fit your research findings better and ensure that your paper remains well-organized and focused.

5. Write a Rough Draft

Once your outline is in place, you can begin the writing process. Remember, when you write a rough draft, it isn’t meant to be perfect. Instead, use it as a working document where you can experiment with and rearrange your arguments and evidence.

Don’t worry too much about grammar, style, or syntax as you write your rough draft. Focus on getting your ideas down on paper and flush out your thesis arguments. You can always refine and rearrange the content the next time around.

Follow the basic structure of your outline but with the freedom to explore different ways of expressing your thoughts. Smodin’s Essay Writer offers a powerful solution for those struggling with starting or structuring their drafts.

After you approve the outline, Smodin can generate an essay based on your initial inputs. This feature can help you quickly create a comprehensive draft, which you can then review and refine. You can even use the power of AI to create multiple rough drafts from which to choose.

6. Add or Subtract Supporting Evidence

Once you have a rough draft, but before you start the final revision, it’s time to do a little cleanup. In this phase, you need to review all your supporting evidence. You want to ensure that there is nothing redundant and that you haven’t overlooked any crucial details.

Many students struggle to make the required word count for an essay and resort to padding their writing with redundant statements. Instead of adding unnecessary content, focus on expanding your analysis to provide deeper insights.

A good essay, regardless of the topic or format, needs to be streamlined. It should convey clear, convincing, relevant information supporting your thesis. If you find some information doesn’t do that, consider tweaking your sources.

Include a variety of sources, including studies, data, and quotes from scholars or other experts. Remember, you’re not just strengthening your argument but demonstrating the depth of your research.

If you want comprehensive feedback on your essay without going to a writing center or pestering your professor, use Smodin. The AI Chat can look at your draft and offer suggestions for improvement.

7. Revise, Cite, and Submit

The final stages of crafting a research paper involve revision, citation, and final review. You must ensure your paper is polished, professionally presented, and plagiarism-free. Of course, integrating Smodin’s AI tools can significantly streamline this process and enhance the quality of your final submission.

Start by using Smodin’s Rewriter tool. This AI-powered feature can help rephrase and refine your draft to improve overall readability. If a specific section of your essay just “doesn’t sound right,” the AI can suggest alternative sentence structures and word choices.

Proper citation is a must for all academic papers. Thankfully, thanks to Smodin’s Research Paper app, this once tedious process is easier than ever. The AI ensures all sources are accurately cited according to the required style guide (APA, MLA, Chicago, etc.).

Plagiarism Checker:

All students need to realize that accidental plagiarism can happen. That’s why using a Plagiarism Checker to scan your essay before you submit it is always useful. Smodin’s Plagiarism Checker can highlight areas of concern so you can adjust accordingly.

Final Submission

After revising, rephrasing, and ensuring all citations are in order, use Smodin’s AI Content Detector to give your paper one last review. This tool can help you analyze your paper’s overall quality and readability so you can make any final tweaks or improvements.

Mastering Research Papers

Mastering the art of the research paper cannot be overstated, whether you’re in high school, college, or postgraduate studies. You can confidently prepare your research paper for submission by leveraging the AI tools listed above.

Research papers help refine your abilities to think critically and write persuasively. The skills you develop here will serve you well beyond the walls of the classroom. Communicating complex ideas clearly and effectively is one of the most powerful tools you can possess.

With the advancements of AI tools like Smodin , writing a research paper has become more accessible than ever before. These technologies streamline the process of organizing, writing, and revising your work. Write with confidence, knowing your best work is yet to come!

share this!

May 14, 2024

This article has been reviewed according to Science X's editorial process and policies . Editors have highlighted the following attributes while ensuring the content's credibility:

fact-checked

trusted source

written by researcher(s)

Our research shows children produce better pieces of writing by hand. But they need keyboard skills too

by Anabela Malpique, Deborah Pino Pasternak and Susan Ledger, The Conversation

Children today are growing up surrounded by technology. So it's easy to assume they will be able to write effectively using a keyboard.

But our research suggests this is not necessarily true.

We need to actively teach students to be able to type as well as write using paper and pen or pencil.

Our research

Our research team has published two recent studies investigating children's handwriting and typing.

In a study published last month we looked at Year 2 students and their handwriting and keyboard writing. This study involved 544 students from 17 primary schools in Perth, Western Australia.

We assessed how easily students wrote stories using paper and pencil compared to writing stories using a laptop. We found they produced longer and higher-quality handwritten texts. This was based on ten criteria, including ideas, vocabulary, spelling and punctuation.

These findings echoed our December 2023 study where we did a meta-analysis of studies published between 2000–2022. These compared the effects of writing by hand or keyboard on primary students' writing.

We looked at 22 international studies involving 6,168 participants from across different countries, including the United States, United Kingdom, Canada and other non-native English-speaking countries, such as Germany and Portugal.

Our analysis showed primary students produce higher quality texts using paper and pen or pencil than when using a keyboard.

Why are kids stronger in handwriting?

In Australia—as in many other countries—children are taught to write by hand first. Keyboard writing is only added as an extra skill once handwriting has been mastered .

We know it is very important to continue to teach children to write by hand, despite so many advances in technology.

Studies show teaching handwriting in the first years of schooling is connected to improved spelling and greater capacity to write well and quickly in primary and later years of schooling.

Other studies show using handwriting to create texts (such as notes) promotes our capacity to learn and memorize information.

But they also need to learn how to use keyboards

We know it is also important for students be able to write quickly and accurately using a keyboard.

They will need to use keyboards to write for study, work and life as they get older. This process needs to become automatic so they can concentrate on the content of what they are writing.

Our research has consistently shown young people who can spell and write quickly and accurately are able to produce longer and higher quality pieces of writing. Other studies have shown when children face difficulties in handwriting or typing, they may often avoid writing altogether and develop a negative mindset toward writing.

Learning to type is complex

As our research suggests, students also need to be taught how to use a keyboard. Much like handwriting, it requires a complex set of cognitive, visual and motor processes, requiring frequent practice and instruction.

It involves learning the location of the keys on a keyboard, combined with spatial skills of positioning, and moving fingers to press the keys in the correct sequence. Students need time to practice so they can move beyond the " hunt and peck " motion (where you have to hunt visually for each key).

Research also suggests teaching about keyboards is more effective when spread out over several years.

First, children need to understand letter locations on the keyboard and the position of their hands, which can be developed via online practice exercises monitored by teachers. Accuracy and speed should not be emphasized until students have mastered where letters are.

Which comes first?

While students ultimately need to be able to write both on paper and using digital devices , there are unanswered questions about the order in which handwriting and typing should be taught or whether they should be taught together.

We also don't yet know if it matters whether students are learning to write via keyboards, touch typing on tablets or by using stylus pens (devices that look like pencils and write via screens).

More research is needed to support teachers, students and families.

How to help your child

Despite these unknowns, there are many things we can do to help students learn how to write on paper and using a keyboard. These include:

dedicating time for practice : teachers can build regular times in class to write and send home small tasks (such as writing a shopping list, finishing a story or describing a monster)

joining in : instead of "policing" your child's writing, show them what you write in your everyday life. As you write, you can talk about what you will write (planning) and you can share ideas about how you can make your writing clearer or more exciting.

talk about your mistakes and find ways of correcting your writing : when adults talk about their errors or doubts, they make them a natural part of the process.

ask children to read what they have written : this provides opportunities for correction and celebration. Praise children's bold attempts such as using new words or experimenting with expressions.

give children choice : this gives children some control. For example, they can choose a topic, they can mix art and letters or they can choose paper or keyboard.

display their writing : make children's writing visible on your walls or fridge or as wallpapers on your devices to instill a sense a pride in what they have done.

Provided by The Conversation

Explore further

Feedback to editors

Scientists develop new geochemical 'fingerprint' to trace contaminants in fertilizer

7 hours ago

Study reveals how a sugar-sensing protein acts as a 'machine' to switch plant growth—and oil production—on and off

8 hours ago

Researchers develop world's smallest quantum light detector on a silicon chip

How heat waves are affecting Arctic phytoplankton

Horse remains show Pagan-Christian trade networks supplied horses from overseas for the last horse sacrifices in Europe

Ion irradiation offers promise for 2D material probing

Furry thieves are running loose in a Maine forest, research shows

Study indicates Earth's earliest sea creatures drove evolution by stirring the water

9 hours ago

Chemists develop new method for introducing fluorinated components into molecules

From fungi to fashion: Mushroom eco-leather is moving towards the mainstream

Relevant physicsforums posts, physics education is 60 years out of date.

May 16, 2024

Is "College Algebra" really just high school "Algebra II"?

Plagiarism & chatgpt: is cheating with ai the new normal.

May 13, 2024

Physics Instructor Minimum Education to Teach Community College

May 11, 2024

Studying "Useful" vs. "Useless" Stuff in School

Apr 30, 2024

Why are Physicists so informal with mathematics?

Apr 29, 2024

More from STEM Educators and Teaching

Related Stories

Writing by hand may increase brain connectivity more than typing on a keyboard

Jan 26, 2024

Five reasons kids still need to learn handwriting

Jun 7, 2023

Why writing by hand makes kids smarter

Oct 1, 2020

Later literacy success hinges on early handwriting lessons

Jul 31, 2017

The case for continuing to write by hand

Oct 5, 2023

Study: Writing letters by hand is best technique for learning to read

Jul 8, 2021

Recommended for you

First-generation medical students face unique challenges and need more targeted support, say researchers

Investigation reveals varied impact of preschool programs on long-term school success

May 2, 2024

Training of brain processes makes reading more efficient

Apr 18, 2024

Researchers find lower grades given to students with surnames that come later in alphabetical order

Apr 17, 2024

Earth, the sun and a bike wheel: Why your high-school textbook was wrong about the shape of Earth's orbit

Apr 8, 2024

Touchibo, a robot that fosters inclusion in education through touch

Apr 5, 2024

Let us know if there is a problem with our content

Use this form if you have come across a typo, inaccuracy or would like to send an edit request for the content on this page. For general inquiries, please use our contact form . For general feedback, use the public comments section below (please adhere to guidelines ).

Please select the most appropriate category to facilitate processing of your request

Thank you for taking time to provide your feedback to the editors.

Your feedback is important to us. However, we do not guarantee individual replies due to the high volume of messages.

E-mail the story

Your email address is used only to let the recipient know who sent the email. Neither your address nor the recipient's address will be used for any other purpose. The information you enter will appear in your e-mail message and is not retained by Phys.org in any form.

Newsletter sign up

Get weekly and/or daily updates delivered to your inbox. You can unsubscribe at any time and we'll never share your details to third parties.

More information Privacy policy

Donate and enjoy an ad-free experience

We keep our content available to everyone. Consider supporting Science X's mission by getting a premium account.

E-mail newsletter