conclusion and recommendation in research example

Get science-backed answers as you write with Paperpal's Research feature

How to Write a Conclusion for Research Papers (with Examples)

The conclusion of a research paper is a crucial section that plays a significant role in the overall impact and effectiveness of your research paper. However, this is also the section that typically receives less attention compared to the introduction and the body of the paper. The conclusion serves to provide a concise summary of the key findings, their significance, their implications, and a sense of closure to the study. Discussing how can the findings be applied in real-world scenarios or inform policy, practice, or decision-making is especially valuable to practitioners and policymakers. The research paper conclusion also provides researchers with clear insights and valuable information for their own work, which they can then build on and contribute to the advancement of knowledge in the field.

The research paper conclusion should explain the significance of your findings within the broader context of your field. It restates how your results contribute to the existing body of knowledge and whether they confirm or challenge existing theories or hypotheses. Also, by identifying unanswered questions or areas requiring further investigation, your awareness of the broader research landscape can be demonstrated.

Remember to tailor the research paper conclusion to the specific needs and interests of your intended audience, which may include researchers, practitioners, policymakers, or a combination of these.

Table of Contents

What is a conclusion in a research paper, summarizing conclusion, editorial conclusion, externalizing conclusion, importance of a good research paper conclusion, how to write a conclusion for your research paper, research paper conclusion examples.

• How to write a research paper conclusion with Paperpal? 

Frequently Asked Questions

A conclusion in a research paper is the final section where you summarize and wrap up your research, presenting the key findings and insights derived from your study. The research paper conclusion is not the place to introduce new information or data that was not discussed in the main body of the paper. When working on how to conclude a research paper, remember to stick to summarizing and interpreting existing content. The research paper conclusion serves the following purposes: 1

• Warn readers of the possible consequences of not attending to the problem.
• Recommend specific course(s) of action.
• Restate key ideas to drive home the ultimate point of your research paper.
• Provide a “take-home” message that you want the readers to remember about your study.

Types of conclusions for research papers

In research papers, the conclusion provides closure to the reader. The type of research paper conclusion you choose depends on the nature of your study, your goals, and your target audience. I provide you with three common types of conclusions:

A summarizing conclusion is the most common type of conclusion in research papers. It involves summarizing the main points, reiterating the research question, and restating the significance of the findings. This common type of research paper conclusion is used across different disciplines.

An editorial conclusion is less common but can be used in research papers that are focused on proposing or advocating for a particular viewpoint or policy. It involves presenting a strong editorial or opinion based on the research findings and offering recommendations or calls to action.

An externalizing conclusion is a type of conclusion that extends the research beyond the scope of the paper by suggesting potential future research directions or discussing the broader implications of the findings. This type of conclusion is often used in more theoretical or exploratory research papers.

Align your conclusion’s tone with the rest of your research paper. Start Writing with Paperpal Now!  

The conclusion in a research paper serves several important purposes:

• Offers Implications and Recommendations : Your research paper conclusion is an excellent place to discuss the broader implications of your research and suggest potential areas for further study. It’s also an opportunity to offer practical recommendations based on your findings.
• Provides Closure : A good research paper conclusion provides a sense of closure to your paper. It should leave the reader with a feeling that they have reached the end of a well-structured and thought-provoking research project.
• Leaves a Lasting Impression : Writing a well-crafted research paper conclusion leaves a lasting impression on your readers. It’s your final opportunity to leave them with a new idea, a call to action, or a memorable quote.

Writing a strong conclusion for your research paper is essential to leave a lasting impression on your readers. Here’s a step-by-step process to help you create and know what to put in the conclusion of a research paper: 2

• Research Statement : Begin your research paper conclusion by restating your research statement. This reminds the reader of the main point you’ve been trying to prove throughout your paper. Keep it concise and clear.
• Key Points : Summarize the main arguments and key points you’ve made in your paper. Avoid introducing new information in the research paper conclusion. Instead, provide a concise overview of what you’ve discussed in the body of your paper.
• Address the Research Questions : If your research paper is based on specific research questions or hypotheses, briefly address whether you’ve answered them or achieved your research goals. Discuss the significance of your findings in this context.
• Significance : Highlight the importance of your research and its relevance in the broader context. Explain why your findings matter and how they contribute to the existing knowledge in your field.
• Implications : Explore the practical or theoretical implications of your research. How might your findings impact future research, policy, or real-world applications? Consider the “so what?” question.
• Future Research : Offer suggestions for future research in your area. What questions or aspects remain unanswered or warrant further investigation? This shows that your work opens the door for future exploration.
• Closing Thought : Conclude your research paper conclusion with a thought-provoking or memorable statement. This can leave a lasting impression on your readers and wrap up your paper effectively. Avoid introducing new information or arguments here.
• Proofread and Revise : Carefully proofread your conclusion for grammar, spelling, and clarity. Ensure that your ideas flow smoothly and that your conclusion is coherent and well-structured.

Write your research paper conclusion 2x faster with Paperpal. Try it now!

Remember that a well-crafted research paper conclusion is a reflection of the strength of your research and your ability to communicate its significance effectively. It should leave a lasting impression on your readers and tie together all the threads of your paper. Now you know how to start the conclusion of a research paper and what elements to include to make it impactful, let’s look at a research paper conclusion sample.

How to write a research paper conclusion with Paperpal?

A research paper conclusion is not just a summary of your study, but a synthesis of the key findings that ties the research together and places it in a broader context. A research paper conclusion should be concise, typically around one paragraph in length. However, some complex topics may require a longer conclusion to ensure the reader is left with a clear understanding of the study’s significance. Paperpal, an AI writing assistant trusted by over 800,000 academics globally, can help you write a well-structured conclusion for your research paper. 

• Sign Up or Log In: Create a new Paperpal account or login with your details.  
• Navigate to Features : Once logged in, head over to the features’ side navigation pane. Click on Templates and you’ll find a suite of generative AI features to help you write better, faster.  
• Generate an outline: Under Templates, select ‘Outlines’. Choose ‘Research article’ as your document type.  
• Select your section: Since you’re focusing on the conclusion, select this section when prompted.  
• Choose your field of study: Identifying your field of study allows Paperpal to provide more targeted suggestions, ensuring the relevance of your conclusion to your specific area of research. 
• Provide a brief description of your study: Enter details about your research topic and findings. This information helps Paperpal generate a tailored outline that aligns with your paper’s content. 
• Generate the conclusion outline: After entering all necessary details, click on ‘generate’. Paperpal will then create a structured outline for your conclusion, to help you start writing and build upon the outline.  
• Write your conclusion: Use the generated outline to build your conclusion. The outline serves as a guide, ensuring you cover all critical aspects of a strong conclusion, from summarizing key findings to highlighting the research’s implications. 
• Refine and enhance: Paperpal’s ‘Make Academic’ feature can be particularly useful in the final stages. Select any paragraph of your conclusion and use this feature to elevate the academic tone, ensuring your writing is aligned to the academic journal standards. 

By following these steps, Paperpal not only simplifies the process of writing a research paper conclusion but also ensures it is impactful, concise, and aligned with academic standards. Sign up with Paperpal today and write your research paper conclusion 2x faster .  

The research paper conclusion is a crucial part of your paper as it provides the final opportunity to leave a strong impression on your readers. In the research paper conclusion, summarize the main points of your research paper by restating your research statement, highlighting the most important findings, addressing the research questions or objectives, explaining the broader context of the study, discussing the significance of your findings, providing recommendations if applicable, and emphasizing the takeaway message. The main purpose of the conclusion is to remind the reader of the main point or argument of your paper and to provide a clear and concise summary of the key findings and their implications. All these elements should feature on your list of what to put in the conclusion of a research paper to create a strong final statement for your work.

A strong conclusion is a critical component of a research paper, as it provides an opportunity to wrap up your arguments, reiterate your main points, and leave a lasting impression on your readers. Here are the key elements of a strong research paper conclusion: 1. Conciseness : A research paper conclusion should be concise and to the point. It should not introduce new information or ideas that were not discussed in the body of the paper. 2. Summarization : The research paper conclusion should be comprehensive enough to give the reader a clear understanding of the research’s main contributions. 3 . Relevance : Ensure that the information included in the research paper conclusion is directly relevant to the research paper’s main topic and objectives; avoid unnecessary details. 4 . Connection to the Introduction : A well-structured research paper conclusion often revisits the key points made in the introduction and shows how the research has addressed the initial questions or objectives. 5. Emphasis : Highlight the significance and implications of your research. Why is your study important? What are the broader implications or applications of your findings? 6 . Call to Action : Include a call to action or a recommendation for future research or action based on your findings.

The length of a research paper conclusion can vary depending on several factors, including the overall length of the paper, the complexity of the research, and the specific journal requirements. While there is no strict rule for the length of a conclusion, but it’s generally advisable to keep it relatively short. A typical research paper conclusion might be around 5-10% of the paper’s total length. For example, if your paper is 10 pages long, the conclusion might be roughly half a page to one page in length.

In general, you do not need to include citations in the research paper conclusion. Citations are typically reserved for the body of the paper to support your arguments and provide evidence for your claims. However, there may be some exceptions to this rule: 1. If you are drawing a direct quote or paraphrasing a specific source in your research paper conclusion, you should include a citation to give proper credit to the original author. 2. If your conclusion refers to or discusses specific research, data, or sources that are crucial to the overall argument, citations can be included to reinforce your conclusion’s validity.

The conclusion of a research paper serves several important purposes: 1. Summarize the Key Points 2. Reinforce the Main Argument 3. Provide Closure 4. Offer Insights or Implications 5. Engage the Reader. 6. Reflect on Limitations

Remember that the primary purpose of the research paper conclusion is to leave a lasting impression on the reader, reinforcing the key points and providing closure to your research. It’s often the last part of the paper that the reader will see, so it should be strong and well-crafted.

• Makar, G., Foltz, C., Lendner, M., & Vaccaro, A. R. (2018). How to write effective discussion and conclusion sections. Clinical spine surgery, 31(8), 345-346.
• Bunton, D. (2005). The structure of PhD conclusion chapters.  Journal of English for academic purposes ,  4 (3), 207-224.

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

• 5 Reasons for Rejection After Peer Review
• Ethical Research Practices For Research with Human Subjects

7 Ways to Improve Your Academic Writing Process

• Paraphrasing in Academic Writing: Answering Top Author Queries

Preflight For Editorial Desk: The Perfect Hybrid (AI + Human) Assistance Against Compromised Manuscripts

You may also like, how to write the first draft of a..., mla works cited page: format, template & examples, how to write a high-quality conference paper, academic editing: how to self-edit academic text with..., measuring academic success: definition & strategies for excellence, phd qualifying exam: tips for success , ai in education: it’s time to change the..., is it ethical to use ai-generated abstracts without..., what are journal guidelines on using generative ai..., quillbot review: features, pricing, and free alternatives.

• Privacy Policy

Home » Research Paper Conclusion – Writing Guide and Examples

Research Paper Conclusion – Writing Guide and Examples

Table of Contents

Research Paper Conclusion

Definition:

A research paper conclusion is the final section of a research paper that summarizes the key findings, significance, and implications of the research. It is the writer’s opportunity to synthesize the information presented in the paper, draw conclusions, and make recommendations for future research or actions.

The conclusion should provide a clear and concise summary of the research paper, reiterating the research question or problem, the main results, and the significance of the findings. It should also discuss the limitations of the study and suggest areas for further research.

Parts of Research Paper Conclusion

The parts of a research paper conclusion typically include:

Restatement of the Thesis

The conclusion should begin by restating the thesis statement from the introduction in a different way. This helps to remind the reader of the main argument or purpose of the research.

Summary of Key Findings

The conclusion should summarize the main findings of the research, highlighting the most important results and conclusions. This section should be brief and to the point.

Implications and Significance

In this section, the researcher should explain the implications and significance of the research findings. This may include discussing the potential impact on the field or industry, highlighting new insights or knowledge gained, or pointing out areas for future research.

Limitations and Recommendations

It is important to acknowledge any limitations or weaknesses of the research and to make recommendations for how these could be addressed in future studies. This shows that the researcher is aware of the potential limitations of their work and is committed to improving the quality of research in their field.

Concluding Statement

The conclusion should end with a strong concluding statement that leaves a lasting impression on the reader. This could be a call to action, a recommendation for further research, or a final thought on the topic.

How to Write Research Paper Conclusion

Here are some steps you can follow to write an effective research paper conclusion:

• Restate the research problem or question: Begin by restating the research problem or question that you aimed to answer in your research. This will remind the reader of the purpose of your study.
• Summarize the main points: Summarize the key findings and results of your research. This can be done by highlighting the most important aspects of your research and the evidence that supports them.
• Discuss the implications: Discuss the implications of your findings for the research area and any potential applications of your research. You should also mention any limitations of your research that may affect the interpretation of your findings.
• Provide a conclusion : Provide a concise conclusion that summarizes the main points of your paper and emphasizes the significance of your research. This should be a strong and clear statement that leaves a lasting impression on the reader.
• Offer suggestions for future research: Lastly, offer suggestions for future research that could build on your findings and contribute to further advancements in the field.

Remember that the conclusion should be brief and to the point, while still effectively summarizing the key findings and implications of your research.

Example of Research Paper Conclusion

Here’s an example of a research paper conclusion:

Conclusion :

In conclusion, our study aimed to investigate the relationship between social media use and mental health among college students. Our findings suggest that there is a significant association between social media use and increased levels of anxiety and depression among college students. This highlights the need for increased awareness and education about the potential negative effects of social media use on mental health, particularly among college students.

Despite the limitations of our study, such as the small sample size and self-reported data, our findings have important implications for future research and practice. Future studies should aim to replicate our findings in larger, more diverse samples, and investigate the potential mechanisms underlying the association between social media use and mental health. In addition, interventions should be developed to promote healthy social media use among college students, such as mindfulness-based approaches and social media detox programs.

Overall, our study contributes to the growing body of research on the impact of social media on mental health, and highlights the importance of addressing this issue in the context of higher education. By raising awareness and promoting healthy social media use among college students, we can help to reduce the negative impact of social media on mental health and improve the well-being of young adults.

Purpose of Research Paper Conclusion

The purpose of a research paper conclusion is to provide a summary and synthesis of the key findings, significance, and implications of the research presented in the paper. The conclusion serves as the final opportunity for the writer to convey their message and leave a lasting impression on the reader.

The conclusion should restate the research problem or question, summarize the main results of the research, and explain their significance. It should also acknowledge the limitations of the study and suggest areas for future research or action.

Overall, the purpose of the conclusion is to provide a sense of closure to the research paper and to emphasize the importance of the research and its potential impact. It should leave the reader with a clear understanding of the main findings and why they matter. The conclusion serves as the writer’s opportunity to showcase their contribution to the field and to inspire further research and action.

When to Write Research Paper Conclusion

The conclusion of a research paper should be written after the body of the paper has been completed. It should not be written until the writer has thoroughly analyzed and interpreted their findings and has written a complete and cohesive discussion of the research.

Before writing the conclusion, the writer should review their research paper and consider the key points that they want to convey to the reader. They should also review the research question, hypotheses, and methodology to ensure that they have addressed all of the necessary components of the research.

Once the writer has a clear understanding of the main findings and their significance, they can begin writing the conclusion. The conclusion should be written in a clear and concise manner, and should reiterate the main points of the research while also providing insights and recommendations for future research or action.

Characteristics of Research Paper Conclusion

The characteristics of a research paper conclusion include:

• Clear and concise: The conclusion should be written in a clear and concise manner, summarizing the key findings and their significance.
• Comprehensive: The conclusion should address all of the main points of the research paper, including the research question or problem, the methodology, the main results, and their implications.
• Future-oriented : The conclusion should provide insights and recommendations for future research or action, based on the findings of the research.
• Impressive : The conclusion should leave a lasting impression on the reader, emphasizing the importance of the research and its potential impact.
• Objective : The conclusion should be based on the evidence presented in the research paper, and should avoid personal biases or opinions.
• Unique : The conclusion should be unique to the research paper and should not simply repeat information from the introduction or body of the paper.

Advantages of Research Paper Conclusion

The advantages of a research paper conclusion include:

• Summarizing the key findings : The conclusion provides a summary of the main findings of the research, making it easier for the reader to understand the key points of the study.
• Emphasizing the significance of the research: The conclusion emphasizes the importance of the research and its potential impact, making it more likely that readers will take the research seriously and consider its implications.
• Providing recommendations for future research or action : The conclusion suggests practical recommendations for future research or action, based on the findings of the study.
• Providing closure to the research paper : The conclusion provides a sense of closure to the research paper, tying together the different sections of the paper and leaving a lasting impression on the reader.
• Demonstrating the writer’s contribution to the field : The conclusion provides the writer with an opportunity to showcase their contribution to the field and to inspire further research and action.

Limitations of Research Paper Conclusion

While the conclusion of a research paper has many advantages, it also has some limitations that should be considered, including:

• I nability to address all aspects of the research: Due to the limited space available in the conclusion, it may not be possible to address all aspects of the research in detail.
• Subjectivity : While the conclusion should be objective, it may be influenced by the writer’s personal biases or opinions.
• Lack of new information: The conclusion should not introduce new information that has not been discussed in the body of the research paper.
• Lack of generalizability: The conclusions drawn from the research may not be applicable to other contexts or populations, limiting the generalizability of the study.
• Misinterpretation by the reader: The reader may misinterpret the conclusions drawn from the research, leading to a misunderstanding of the findings.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Background of The Study – Examples and Writing...

Research Paper Introduction – Writing Guide and...

Research Methods – Types, Examples and Guide

How to Publish a Research Paper – Step by Step...

Assignment – Types, Examples and Writing Guide

Research Questions – Types, Examples and Writing...

How To Write The Conclusion Chapter

A Simple Explainer With Examples + Free Template

By: Jenna Crossley (PhD) | Reviewed By: Dr. Eunice Rautenbach | September 2021

So, you’ve wrapped up your results and discussion chapters, and you’re finally on the home stretch – the conclusion chapter . In this post, we’ll discuss everything you need to know to craft a high-quality conclusion chapter for your dissertation or thesis project.

Overview: The Conclusion Chapter

• What the thesis/dissertation conclusion chapter is
• What to include in your conclusion
• How to structure and write up your conclusion
• A few tips  to help you ace the chapter
• FREE conclusion template

What is the conclusion chapter?

The conclusion chapter is typically the final major chapter of a dissertation or thesis. As such, it serves as a concluding summary of your research findings and wraps up the document. While some publications such as journal articles and research reports combine the discussion and conclusion sections, these are typically separate chapters in a dissertation or thesis. As always, be sure to check what your university’s structural preference is before you start writing up these chapters.

So, what’s the difference between the discussion and the conclusion chapter?

Well, the two chapters are quite similar , as they both discuss the key findings of the study. However, the conclusion chapter is typically more general and high-level in nature. In your discussion chapter, you’ll typically discuss the intricate details of your study, but in your conclusion chapter, you’ll take a   broader perspective, reporting on the main research outcomes and how these addressed your research aim (or aims) .

A core function of the conclusion chapter is to synthesise all major points covered in your study and to tell the reader what they should take away from your work. Basically, you need to tell them what you found , why it’s valuable , how it can be applied , and what further research can be done.

Whatever you do, don’t just copy and paste what you’ve written in your discussion chapter! The conclusion chapter should not be a simple rehash of the discussion chapter. While the two chapters are similar, they have distinctly different functions.  

What should I include in the conclusion chapter?

To understand what needs to go into your conclusion chapter, it’s useful to understand what the chapter needs to achieve. In general, a good dissertation conclusion chapter should achieve the following:

• Summarise the key findings of the study
• Explicitly answer the research question(s) and address the research aims
• Inform the reader of the study’s main contributions
• Discuss any limitations or weaknesses of the study
• Present recommendations for future research

Therefore, your conclusion chapter needs to cover these core components. Importantly, you need to be careful not to include any new findings or data points. Your conclusion chapter should be based purely on data and analysis findings that you’ve already presented in the earlier chapters. If there’s a new point you want to introduce, you’ll need to go back to your results and discussion chapters to weave the foundation in there.

In many cases, readers will jump from the introduction chapter directly to the conclusions chapter to get a quick overview of the study’s purpose and key findings. Therefore, when you write up your conclusion chapter, it’s useful to assume that the reader hasn’t consumed the inner chapters of your dissertation or thesis. In other words, craft your conclusion chapter such that there’s a strong connection and smooth flow between the introduction and conclusion chapters, even though they’re on opposite ends of your document.

Need a helping hand?

How to write the conclusion chapter

Now that you have a clearer view of what the conclusion chapter is about, let’s break down the structure of this chapter so that you can get writing. Keep in mind that this is merely a typical structure – it’s not set in stone or universal. Some universities will prefer that you cover some of these points in the discussion chapter , or that you cover the points at different levels in different chapters.

Step 1: Craft a brief introduction section

As with all chapters in your dissertation or thesis, the conclusions chapter needs to start with a brief introduction. In this introductory section, you’ll want to tell the reader what they can expect to find in the chapter, and in what order . Here’s an example of what this might look like:

This chapter will conclude the study by summarising the key research findings in relation to the research aims and questions and discussing the value and contribution thereof. It will also review the limitations of the study and propose opportunities for future research.

Importantly, the objective here is just to give the reader a taste of what’s to come (a roadmap of sorts), not a summary of the chapter. So, keep it short and sweet – a paragraph or two should be ample.

Step 2: Discuss the overall findings in relation to the research aims

The next step in writing your conclusions chapter is to discuss the overall findings of your study , as they relate to the research aims and research questions . You would have likely covered similar ground in the discussion chapter, so it’s important to zoom out a little bit here and focus on the broader findings – specifically, how these help address the research aims .

In practical terms, it’s useful to start this section by reminding your reader of your research aims and research questions, so that the findings are well contextualised. In this section, phrases such as, “This study aimed to…” and “the results indicate that…” will likely come in handy. For example, you could say something like the following:

This study aimed to investigate the feeding habits of the naked mole-rat. The results indicate that naked mole rats feed on underground roots and tubers. Further findings show that these creatures eat only a part of the plant, leaving essential parts to ensure long-term food stability.

Be careful not to make overly bold claims here. Avoid claims such as “this study proves that” or “the findings disprove existing the existing theory”. It’s seldom the case that a single study can prove or disprove something. Typically, this is achieved by a broader body of research, not a single study – especially not a dissertation or thesis which will inherently have significant  limitations . We’ll discuss those limitations a little later.

Step 3: Discuss how your study contributes to the field

Next, you’ll need to discuss how your research has contributed to the field – both in terms of theory and practice . This involves talking about what you achieved in your study, highlighting why this is important and valuable, and how it can be used or applied.

In this section you’ll want to:

• Mention any research outputs created as a result of your study (e.g., articles, publications, etc.)
• Inform the reader on just how your research solves your research problem , and why that matters
• Reflect on gaps in the existing research and discuss how your study contributes towards addressing these gaps
• Discuss your study in relation to relevant theories . For example, does it confirm these theories or constructively challenge them?
• Discuss how your research findings can be applied in the real world . For example, what specific actions can practitioners take, based on your findings?

Be careful to strike a careful balance between being firm but humble in your arguments here. It’s unlikely that your one study will fundamentally change paradigms or shake up the discipline, so making claims to this effect will be frowned upon . At the same time though, you need to present your arguments with confidence, firmly asserting the contribution your research has made, however small that contribution may be. Simply put, you need to keep it balanced .

Step 4: Reflect on the limitations of your study

Now that you’ve pumped your research up, the next step is to critically reflect on the limitations and potential shortcomings of your study. You may have already covered this in the discussion chapter, depending on your university’s structural preferences, so be careful not to repeat yourself unnecessarily.

There are many potential limitations that can apply to any given study. Some common ones include:

• Sampling issues that reduce the generalisability of the findings (e.g., non-probability sampling )
• Insufficient sample size (e.g., not getting enough survey responses ) or limited data access
• Low-resolution data collection or analysis techniques
• Researcher bias or lack of experience
• Lack of access to research equipment
• Time constraints that limit the methodology (e.g. cross-sectional vs longitudinal time horizon)
• Budget constraints that limit various aspects of the study

Discussing the limitations of your research may feel self-defeating (no one wants to highlight their weaknesses, right), but it’s a critical component of high-quality research. It’s important to appreciate that all studies have limitations (even well-funded studies by expert researchers) – therefore acknowledging these limitations adds credibility to your research by showing that you understand the limitations of your research design .

That being said, keep an eye on your wording and make sure that you don’t undermine your research . It’s important to strike a balance between recognising the limitations, but also highlighting the value of your research despite those limitations. Show the reader that you understand the limitations, that these were justified given your constraints, and that you know how they can be improved upon – this will get you marks.

Next, you’ll need to make recommendations for future studies. This will largely be built on the limitations you just discussed. For example, if one of your study’s weaknesses was related to a specific data collection or analysis method, you can make a recommendation that future researchers undertake similar research using a more sophisticated method.

Another potential source of future research recommendations is any data points or analysis findings that were interesting or surprising , but not directly related to your study’s research aims and research questions. So, if you observed anything that “stood out” in your analysis, but you didn’t explore it in your discussion (due to a lack of relevance to your research aims), you can earmark that for further exploration in this section.

Essentially, this section is an opportunity to outline how other researchers can build on your study to take the research further and help develop the body of knowledge. So, think carefully about the new questions that your study has raised, and clearly outline these for future researchers to pick up on.

Step 6: Wrap up with a closing summary

Tips for a top-notch conclusion chapter

Now that we’ve covered the what , why and how of the conclusion chapter, here are some quick tips and suggestions to help you craft a rock-solid conclusion.

• Don’t ramble . The conclusion chapter usually consumes 5-7% of the total word count (although this will vary between universities), so you need to be concise. Edit this chapter thoroughly with a focus on brevity and clarity.
• Be very careful about the claims you make in terms of your study’s contribution. Nothing will make the marker’s eyes roll back faster than exaggerated or unfounded claims. Be humble but firm in your claim-making.
• Use clear and simple language that can be easily understood by an intelligent layman. Remember that not every reader will be an expert in your field, so it’s important to make your writing accessible. Bear in mind that no one knows your research better than you do, so it’s important to spell things out clearly for readers.

Hopefully, this post has given you some direction and confidence to take on the conclusion chapter of your dissertation or thesis with confidence. If you’re still feeling a little shaky and need a helping hand, consider booking a free initial consultation with a friendly Grad Coach to discuss how we can help you with hands-on, private coaching.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

17 Comments

Really you team are doing great!

Your guide on writing the concluding chapter of a research is really informative especially to the beginners who really do not know where to start. Im now ready to start. Keep it up guys

Really your team are doing great!

Very helpful guidelines, timely saved. Thanks so much for the tips.

This post was very helpful and informative. Thank you team.

A very enjoyable, understandable and crisp presentation on how to write a conclusion chapter. I thoroughly enjoyed it. Thanks Jenna.

This was a very helpful article which really gave me practical pointers for my concluding chapter. Keep doing what you are doing! It meant a lot to me to be able to have this guide. Thank you so much.

Nice content dealing with the conclusion chapter, it’s a relief after the streneous task of completing discussion part.Thanks for valuable guidance

Thanks for your guidance

I get all my doubts clarified regarding the conclusion chapter. It’s really amazing. Many thanks.

Very helpful tips. Thanks so much for the guidance

Thank you very much for this piece. It offers a very helpful starting point in writing the conclusion chapter of my thesis.

It’s awesome! Most useful and timely too. Thanks a million times

Bundle of thanks for your guidance. It was greatly helpful.

Wonderful, clear, practical guidance. So grateful to read this as I conclude my research. Thank you.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• 9. The Conclusion
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Quantitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

The conclusion is intended to help the reader understand why your research should matter to them after they have finished reading the paper. A conclusion is not merely a summary of the main topics covered or a re-statement of your research problem, but a synthesis of key points derived from the findings of your study and, if applicable, where you recommend new areas for future research. For most college-level research papers, two or three well-developed paragraphs is sufficient for a conclusion, although in some cases, more paragraphs may be required in describing the key findings and their significance.

Conclusions. The Writing Center. University of North Carolina; Conclusions. The Writing Lab and The OWL. Purdue University.

Importance of a Good Conclusion

A well-written conclusion provides you with important opportunities to demonstrate to the reader your understanding of the research problem. These include:

• Presenting the last word on the issues you raised in your paper . Just as the introduction gives a first impression to your reader, the conclusion offers a chance to leave a lasting impression. Do this, for example, by highlighting key findings in your analysis that advance new understanding about the research problem, that are unusual or unexpected, or that have important implications applied to practice.
• Summarizing your thoughts and conveying the larger significance of your study . The conclusion is an opportunity to succinctly re-emphasize  your answer to the "So What?" question by placing the study within the context of how your research advances past research about the topic.
• Identifying how a gap in the literature has been addressed . The conclusion can be where you describe how a previously identified gap in the literature [first identified in your literature review section] has been addressed by your research and why this contribution is significant.
• Demonstrating the importance of your ideas . Don't be shy. The conclusion offers an opportunity to elaborate on the impact and significance of your findings. This is particularly important if your study approached examining the research problem from an unusual or innovative perspective.
• Introducing possible new or expanded ways of thinking about the research problem . This does not refer to introducing new information [which should be avoided], but to offer new insight and creative approaches for framing or contextualizing the research problem based on the results of your study.

Bunton, David. “The Structure of PhD Conclusion Chapters.” Journal of English for Academic Purposes 4 (July 2005): 207–224; Conclusions. The Writing Center. University of North Carolina; Kretchmer, Paul. Twelve Steps to Writing an Effective Conclusion. San Francisco Edit, 2003-2008; Conclusions. The Writing Lab and The OWL. Purdue University; Assan, Joseph. "Writing the Conclusion Chapter: The Good, the Bad and the Missing." Liverpool: Development Studies Association (2009): 1-8.

Structure and Writing Style

I.  General Rules

The general function of your paper's conclusion is to restate the main argument . It reminds the reader of the strengths of your main argument(s) and reiterates the most important evidence supporting those argument(s). Do this by clearly summarizing the context, background, and necessity of pursuing the research problem you investigated in relation to an issue, controversy, or a gap found in the literature. However, make sure that your conclusion is not simply a repetitive summary of the findings. This reduces the impact of the argument(s) you have developed in your paper.

When writing the conclusion to your paper, follow these general rules:

• Present your conclusions in clear, concise language. Re-state the purpose of your study, then describe how your findings differ or support those of other studies and why [i.e., what were the unique, new, or crucial contributions your study made to the overall research about your topic?].
• Do not simply reiterate your findings or the discussion of your results. Provide a synthesis of arguments presented in the paper to show how these converge to address the research problem and the overall objectives of your study.
• Indicate opportunities for future research if you haven't already done so in the discussion section of your paper. Highlighting the need for further research provides the reader with evidence that you have an in-depth awareness of the research problem but that further investigations should take place beyond the scope of your investigation.

Consider the following points to help ensure your conclusion is presented well:

• If the argument or purpose of your paper is complex, you may need to summarize the argument for your reader.
• If, prior to your conclusion, you have not yet explained the significance of your findings or if you are proceeding inductively, use the end of your paper to describe your main points and explain their significance.
• Move from a detailed to a general level of consideration that returns the topic to the context provided by the introduction or within a new context that emerges from the data [this is opposite of the introduction, which begins with general discussion of the context and ends with a detailed description of the research problem]. 

The conclusion also provides a place for you to persuasively and succinctly restate the research problem, given that the reader has now been presented with all the information about the topic . Depending on the discipline you are writing in, the concluding paragraph may contain your reflections on the evidence presented. However, the nature of being introspective about the research you have conducted will depend on the topic and whether your professor wants you to express your observations in this way. If asked to think introspectively about the topics, do not delve into idle speculation. Being introspective means looking within yourself as an author to try and understand an issue more deeply, not to guess at possible outcomes or make up scenarios not supported by the evidence.

II.  Developing a Compelling Conclusion

Although an effective conclusion needs to be clear and succinct, it does not need to be written passively or lack a compelling narrative. Strategies to help you move beyond merely summarizing the key points of your research paper may include any of the following:

• If your essay deals with a critical, contemporary problem, warn readers of the possible consequences of not attending to the problem proactively.
• Recommend a specific course or courses of action that, if adopted, could address a specific problem in practice or in the development of new knowledge leading to positive change.
• Cite a relevant quotation or expert opinion already noted in your paper in order to lend authority and support to the conclusion(s) you have reached [a good source would be from your literature review].
• Explain the consequences of your research in a way that elicits action or demonstrates urgency in seeking change.
• Restate a key statistic, fact, or visual image to emphasize the most important finding of your paper.
• If your discipline encourages personal reflection, illustrate your concluding point by drawing from your own life experiences.
• Return to an anecdote, an example, or a quotation that you presented in your introduction, but add further insight derived from the findings of your study; use your interpretation of results from your study to recast it in new or important ways.
• Provide a "take-home" message in the form of a succinct, declarative statement that you want the reader to remember about your study.

III. Problems to Avoid

Failure to be concise Your conclusion section should be concise and to the point. Conclusions that are too lengthy often have unnecessary information in them. The conclusion is not the place for details about your methodology or results. Although you should give a summary of what was learned from your research, this summary should be relatively brief, since the emphasis in the conclusion is on the implications, evaluations, insights, and other forms of analysis that you make. Strategies for writing concisely can be found here .

Failure to comment on larger, more significant issues In the introduction, your task was to move from the general [the field of study] to the specific [the research problem]. However, in the conclusion, your task is to move from a specific discussion [your research problem] back to a general discussion framed around the implications and significance of your findings [i.e., how your research contributes new understanding or fills an important gap in the literature]. In short, the conclusion is where you should place your research within a larger context [visualize your paper as an hourglass--start with a broad introduction and review of the literature, move to the specific analysis and discussion, conclude with a broad summary of the study's implications and significance].

Failure to reveal problems and negative results Negative aspects of the research process should never be ignored. These are problems, deficiencies, or challenges encountered during your study. They should be summarized as a way of qualifying your overall conclusions. If you encountered negative or unintended results [i.e., findings that are validated outside the research context in which they were generated], you must report them in the results section and discuss their implications in the discussion section of your paper. In the conclusion, use negative results as an opportunity to explain their possible significance and/or how they may form the basis for future research.

Failure to provide a clear summary of what was learned In order to be able to discuss how your research fits within your field of study [and possibly the world at large], you need to summarize briefly and succinctly how it contributes to new knowledge or a new understanding about the research problem. This element of your conclusion may be only a few sentences long.

Failure to match the objectives of your research Often research objectives in the social and behavioral sciences change while the research is being carried out. This is not a problem unless you forget to go back and refine the original objectives in your introduction. As these changes emerge they must be documented so that they accurately reflect what you were trying to accomplish in your research [not what you thought you might accomplish when you began].

Resist the urge to apologize If you've immersed yourself in studying the research problem, you presumably should know a good deal about it [perhaps even more than your professor!]. Nevertheless, by the time you have finished writing, you may be having some doubts about what you have produced. Repress those doubts! Don't undermine your authority as a researcher by saying something like, "This is just one approach to examining this problem; there may be other, much better approaches that...." The overall tone of your conclusion should convey confidence to the reader about the study's validity and realiability.

Assan, Joseph. "Writing the Conclusion Chapter: The Good, the Bad and the Missing." Liverpool: Development Studies Association (2009): 1-8; Concluding Paragraphs. College Writing Center at Meramec. St. Louis Community College; Conclusions. The Writing Center. University of North Carolina; Conclusions. The Writing Lab and The OWL. Purdue University; Freedman, Leora  and Jerry Plotnick. Introductions and Conclusions. The Lab Report. University College Writing Centre. University of Toronto; Leibensperger, Summer. Draft Your Conclusion. Academic Center, the University of Houston-Victoria, 2003; Make Your Last Words Count. The Writer’s Handbook. Writing Center. University of Wisconsin Madison; Miquel, Fuster-Marquez and Carmen Gregori-Signes. “Chapter Six: ‘Last but Not Least:’ Writing the Conclusion of Your Paper.” In Writing an Applied Linguistics Thesis or Dissertation: A Guide to Presenting Empirical Research . John Bitchener, editor. (Basingstoke,UK: Palgrave Macmillan, 2010), pp. 93-105; Tips for Writing a Good Conclusion. Writing@CSU. Colorado State University; Kretchmer, Paul. Twelve Steps to Writing an Effective Conclusion. San Francisco Edit, 2003-2008; Writing Conclusions. Writing Tutorial Services, Center for Innovative Teaching and Learning. Indiana University; Writing: Considering Structure and Organization. Institute for Writing Rhetoric. Dartmouth College.

Writing Tip

Don't Belabor the Obvious!

Avoid phrases like "in conclusion...," "in summary...," or "in closing...." These phrases can be useful, even welcome, in oral presentations. But readers can see by the tell-tale section heading and number of pages remaining that they are reaching the end of your paper. You'll irritate your readers if you belabor the obvious.

Assan, Joseph. "Writing the Conclusion Chapter: The Good, the Bad and the Missing." Liverpool: Development Studies Association (2009): 1-8.

Another Writing Tip

New Insight, Not New Information!

Don't surprise the reader with new information in your conclusion that was never referenced anywhere else in the paper. This why the conclusion rarely has citations to sources. If you have new information to present, add it to the discussion or other appropriate section of the paper. Note that, although no new information is introduced, the conclusion, along with the discussion section, is where you offer your most "original" contributions in the paper; the conclusion is where you describe the value of your research, demonstrate that you understand the material that you’ve presented, and position your findings within the larger context of scholarship on the topic, including describing how your research contributes new insights to that scholarship.

Assan, Joseph. "Writing the Conclusion Chapter: The Good, the Bad and the Missing." Liverpool: Development Studies Association (2009): 1-8; Conclusions. The Writing Center. University of North Carolina.

• << Previous: Limitations of the Study
• Next: Appendices >>
• Last Updated: May 30, 2024 9:38 AM
• URL: https://libguides.usc.edu/writingguide

Writing the parts of scientific reports

22 Writing the conclusion & recommendations

There are probably some overlaps between the Conclusion and the Discussion section. Nevertheless, this section gives you the opportunity to highlight the most important points in your report, and is sometimes the only section read. Think about what your research/ study has achieved, and the most important findings and ideas you want the reader to know. As all studies have limitations also think about what you were not able to cover (this shows that you are able to evaluate your own work objectively).

Possible structure of this section:

Use present perfect to sum up/ evaluate:

This study has explored/ has attempted …

Use past tense to state what your aim was and to refer to actions you carried out:

• This study was intended to analyse …
• The aim of this study was to …

Use present tense to evaluate your study and to state the generalizations and implications that you draw from your findings.

• The results add to the knowledge of …
• These findings s uggest that …

You can either use present tense or past tense to summarize your results.

• The findings reveal …
• It was found that …

Achievements of this study (positive)

• This study provides evidence that …
• This work has contributed to a number of key issues in the field such as …

Limitations of the study (negative)

• Several limitations should be noted. First …

Combine positive and negative remarks to give a balanced assessment:

• Although this research is somewhat limited in scope, its findings can provide a basis for future studies.
• Despite the limitations, findings from the present study can help us understand …

Use more cautious language (modal verbs may, can, could)

• There are a number of possible extensions of this research …
• The findings suggest the possibility for future research on …
• These results may be important for future studies on …
• Examining a wider context could/ would lead …

Or indicate that future research is needed

• There is still a need for future research to determine …
• Further studies should be undertaken to discover…
• It would be worthwhile to investigate …

Academic Writing in a Swiss University Context Copyright © 2018 by Irene Dietrichs. All Rights Reserved.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write a Thesis or Dissertation Conclusion

How to Write a Dissertation Conclusion | Checklist and Examples

Published on 9 September 2022 by Tegan George and Shona McCombes. Revised on 10 October 2022.

The conclusion is the very last part of your thesis or dissertation . It should be concise and engaging, leaving your reader with a clear understanding of your main findings, as well as the answer to your research question .

In it, you should:

• Clearly state the answer to your main research question
• Summarise and reflect on your research process
• Make recommendations for future work on your topic
• Show what new knowledge you have contributed to your field
• Wrap up your thesis or dissertation

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Discussion vs. conclusion, how long should your conclusion be, step 1: answer your research question, step 2: summarise and reflect on your research, step 3: make future recommendations, step 4: emphasise your contributions to your field, step 5: wrap up your thesis or dissertation, full conclusion example, conclusion checklist, frequently asked questions about conclusion sections.

While your conclusion contains similar elements to your discussion section , they are not the same thing.

Your conclusion should be shorter and more general than your discussion. Instead of repeating literature from your literature review , discussing specific research results , or interpreting your data in detail, concentrate on making broad statements that sum up the most important insights of your research.

As a rule of thumb, your conclusion should not introduce new data, interpretations, or arguments.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

Depending on whether you are writing a thesis or dissertation, your length will vary. Generally, a conclusion should make up around 5–7% of your overall word count.

An empirical scientific study will often have a short conclusion, concisely stating the main findings and recommendations for future research. A humanities topic or systematic review , on the other hand, might require more space to conclude its analysis, tying all the previous sections together in an overall argument.

Your conclusion should begin with the main question that your thesis or dissertation aimed to address. This is your final chance to show that you’ve done what you set out to do, so make sure to formulate a clear, concise answer.

• Don’t repeat a list of all the results that you already discussed
• Do synthesise them into a final takeaway that the reader will remember.

An empirical thesis or dissertation conclusion may begin like this:

A case study –based thesis or dissertation conclusion may begin like this:

In the second example, the research aim is not directly restated, but rather added implicitly to the statement. To avoid repeating yourself, it is helpful to reformulate your aims and questions into an overall statement of what you did and how you did it.

Your conclusion is an opportunity to remind your reader why you took the approach you did, what you expected to find, and how well the results matched your expectations.

To avoid repetition , consider writing more reflectively here, rather than just writing a summary of each preceding section. Consider mentioning the effectiveness of your methodology , or perhaps any new questions or unexpected insights that arose in the process.

You can also mention any limitations of your research, but only if you haven’t already included these in the discussion. Don’t dwell on them at length, though – focus on the positives of your work.

• While x limits the generalisability of the results, this approach provides new insight into y .
• This research clearly illustrates x , but it also raises the question of y .

Prevent plagiarism, run a free check.

You may already have made a few recommendations for future research in your discussion section, but the conclusion is a good place to elaborate and look ahead, considering the implications of your findings in both theoretical and practical terms.

• Based on these conclusions, practitioners should consider …
• To better understand the implications of these results, future studies could address …
• Further research is needed to determine the causes of/effects of/relationship between …

When making recommendations for further research, be sure not to undermine your own work. Relatedly, while future studies might confirm, build on, or enrich your conclusions, they shouldn’t be required for your argument to feel complete. Your work should stand alone on its own merits.

Just as you should avoid too much self-criticism, you should also avoid exaggerating the applicability of your research. If you’re making recommendations for policy, business, or other practical implementations, it’s generally best to frame them as ‘shoulds’ rather than ‘musts’. All in all, the purpose of academic research is to inform, explain, and explore – not to demand.

Make sure your reader is left with a strong impression of what your research has contributed to the state of your field.

Some strategies to achieve this include:

• Returning to your problem statement to explain how your research helps solve the problem
• Referring back to the literature review and showing how you have addressed a gap in knowledge
• Discussing how your findings confirm or challenge an existing theory or assumption

Again, avoid simply repeating what you’ve already covered in the discussion in your conclusion. Instead, pick out the most important points and sum them up succinctly, situating your project in a broader context.

The end is near! Once you’ve finished writing your conclusion, it’s time to wrap up your thesis or dissertation with a few final steps:

• It’s a good idea to write your abstract next, while the research is still fresh in your mind.
• Next, make sure your reference list is complete and correctly formatted. To speed up the process, you can use our free APA citation generator .
• Once you’ve added any appendices , you can create a table of contents and title page .
• Finally, read through the whole document again to make sure your thesis is clearly written and free from language errors. You can proofread it yourself , ask a friend, or consider Scribbr’s proofreading and editing service .

Here is an example of how you can write your conclusion section. Notice how it includes everything mentioned above:

V. Conclusion

The current research aimed to identify acoustic speech characteristics which mark the beginning of an exacerbation in COPD patients.

The central questions for this research were as follows: 1. Which acoustic measures extracted from read speech differ between COPD speakers in stable condition and healthy speakers? 2. In what ways does the speech of COPD patients during an exacerbation differ from speech of COPD patients during stable periods?

All recordings were aligned using a script. Subsequently, they were manually annotated to indicate respiratory actions such as inhaling and exhaling. The recordings of 9 stable COPD patients reading aloud were then compared with the recordings of 5 healthy control subjects reading aloud. The results showed a significant effect of condition on the number of in- and exhalations per syllable, the number of non-linguistic in- and exhalations per syllable, and the ratio of voiced and silence intervals. The number of in- and exhalations per syllable and the number of non-linguistic in- and exhalations per syllable were higher for COPD patients than for healthy controls, which confirmed both hypotheses.

However, the higher ratio of voiced and silence intervals for COPD patients compared to healthy controls was not in line with the hypotheses. This unpredicted result might have been caused by the different reading materials or recording procedures for both groups, or by a difference in reading skills. Moreover, there was a trend regarding the effect of condition on the number of syllables per breath group. The number of syllables per breath group was higher for healthy controls than for COPD patients, which was in line with the hypothesis. There was no effect of condition on pitch, intensity, center of gravity, pitch variability, speaking rate, or articulation rate.

This research has shown that the speech of COPD patients in exacerbation differs from the speech of COPD patients in stable condition. This might have potential for the detection of exacerbations. However, sustained vowels rarely occur in spontaneous speech. Therefore, the last two outcome measures might have greater potential for the detection of beginning exacerbations, but further research on the different outcome measures and their potential for the detection of exacerbations is needed due to the limitations of the current study.

Checklist: Conclusion

I have clearly and concisely answered the main research question .

I have summarized my overall argument or key takeaways.

I have mentioned any important limitations of the research.

I have given relevant recommendations .

I have clearly explained what my research has contributed to my field.

I have  not introduced any new data or arguments.

You've written a great conclusion! Use the other checklists to further improve your dissertation.

In a thesis or dissertation, the discussion is an in-depth exploration of the results, going into detail about the meaning of your findings and citing relevant sources to put them in context.

The conclusion is more shorter and more general: it concisely answers your main research question and makes recommendations based on your overall findings.

While it may be tempting to present new arguments or evidence in your thesis or disseration conclusion , especially if you have a particularly striking argument you’d like to finish your analysis with, you shouldn’t. Theses and dissertations follow a more formal structure than this.

All your findings and arguments should be presented in the body of the text (more specifically in the discussion section and results section .) The conclusion is meant to summarize and reflect on the evidence and arguments you have already presented, not introduce new ones.

For a stronger dissertation conclusion , avoid including:

• Generic concluding phrases (e.g. “In conclusion…”)
• Weak statements that undermine your argument (e.g. “There are good points on both sides of this issue.”)

Your conclusion should leave the reader with a strong, decisive impression of your work.

The conclusion of your thesis or dissertation shouldn’t take up more than 5-7% of your overall word count.

The conclusion of your thesis or dissertation should include the following:

• A restatement of your research question
• A summary of your key arguments and/or results
• A short discussion of the implications of your research

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

George, T. & McCombes, S. (2022, October 10). How to Write a Dissertation Conclusion | Checklist and Examples. Scribbr. Retrieved 3 June 2024, from https://www.scribbr.co.uk/thesis-dissertation/conclusion/

Is this article helpful?

Tegan George

Other students also liked, how to write a thesis or dissertation introduction, how to write a discussion section | tips & examples, how to write an abstract | steps & examples.

An official website of the United States government

The .gov means it's official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you're on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings
• Browse Titles

NCBI Bookshelf. A service of the National Library of Medicine, National Institutes of Health.

O’Hara R, Johnson M, Hirst E, et al. A qualitative study of decision-making and safety in ambulance service transitions. Southampton (UK): NIHR Journals Library; 2014 Dec. (Health Services and Delivery Research, No. 2.56.)

A qualitative study of decision-making and safety in ambulance service transitions.

Chapter 8 conclusions and recommendations.

The aim of this study was to explore the range and nature of influences on safety in decision-making by ambulance service staff (paramedics). A qualitative approach was adopted using a range of complementary methods. The study has provided insights on the types of decisions that staff engage in on a day-to-day basis. It has also identified a range of system risk factors influencing decisions about patient care. Although this was a relatively small-scale exploratory study, confidence in the generalisability of the headline findings is enhanced by the high level of consistency in the findings, obtained using multiple methods, and the notable consensus among participants.

The seven predominant system influences identified should not be considered discrete but as overlapping and complementary issues. They also embody a range of subthemes that represent topics for future research and/or intervention.

The apparently high level of consistency across the participating trusts suggests that the issues identified may be generic and relevant to other ambulance service trusts.

In view of the remit of this study, aspects relating to system weaknesses and potential threats to patient safety dominate in the account of findings. However, it should be noted that respondent accounts also provided examples of systems that were said to be working well, for example specific care management pathways, local roles and ways of working and technological initiatives such as IBIS and the ePRF.

• Implications for health care

The NHS system within which the ambulance service operates is characterised in our study as fragmented and inconsistent. For ambulance service staff the extent of variation across the geographical areas in which they work is problematic in terms of knowing what services are available and being able to access them. The lack of standardisation in practice guidelines, pathways and protocols across services and between areas makes it particularly challenging for staff to keep up to date with requirements in different parts of their own trust locations and when crossing trust boundaries. Although a degree of consistency across the network is likely to improve the situation, it is also desirable to have sufficient flexibility to accommodate the needs of specific local populations. There was some concern over the potential for further fragmentation with the increased number of CCGs.

Ambulance services are increasingly under pressure to focus on reducing conveyance rates to A&E; this arguably intensifies the need to ensure that crews are appropriately skilled to be able to make effective decisions over the need to convey or not to convey if associated risks to patients are to be minimised. Our findings highlight the challenges of developing staff and ensuring that their skills are utilised where they are most needed within the context of organisational resource constraints and operational demands. Decisions over non-conveyance to A&E are moderated by the availability of alternative care pathways and providers. There were widespread claims of local variability in this respect. Staff training and development, and access to alternatives to A&E, were identified as priorities for attention by workshop attendees.

One of the difficulties for ambulance services is that they operate as a 24/7 service within a wider urgent and emergency care network that, beyond A&E, operates a more restricted working day. The study findings identify this as problematic for two reasons. First, it fuels demand for ambulance service care as a route to timely treatment, when alternatives may involve delay. Second, it contributes to inappropriate conveyance to A&E because more appropriate options are unavailable or limited during out-of-hours periods. Ultimately, this restricts the scope for ensuring that patients are getting the right level of care at the right time and place. Study participants identified some patient populations as particularly poorly served in terms of alternatives to A&E (e.g. those with mental health issues, those at the end of life, older patients and those with chronic conditions).

The effectiveness of the paramedic role in facilitating access to appropriate care pathways hinges on relationships with other care providers (e.g. primary care, acute care, mental health care, community health care). An important element relates to the cultural profile of paramedics in the NHS, specifically, the extent to which other health professionals and care providers consider the clinical judgements/decisions made by paramedics as credible and actionable. Staff identified this as a barrier to access where the ambulance service is still viewed primarily as a transport service. Consideration could be given to ways of improving effective teamworking and communication across service and professional boundaries.

Although paramedics acknowledged the difficulties of telephone triage, they also identified how the limitations of this system impact on them. Over-triage at the initial call-handling stage places considerable demands on both staff and vehicle resources. A related concern is the limited information conveyed to crews following triage. Initial triage was suggested as an area that warrants attention to improve resource allocation.

The findings highlight the challenges faced by front-line ambulance service staff. It was apparent that the extent and nature of the demand for ambulance conveyance represents a notable source of strain and tension for individuals and at an organisational level. For example, there were widespread claims that meeting operational demands for ambulance services limits the time available for training and professional development, with this potentially representing a risk for patients and for staff. Staff perceptions of risk relating to patient safety extend to issues of secondary risk management, that is, personal and institutional liabilities, in particular risks associated with loss of professional registration. The belief that they are more likely to be blamed than supported by their organisation in the event of an incident was cited by staff as a source of additional anxiety when making more complex decisions. This perceived vulnerability can provoke excessively risk-averse decisions. These issues merit further attention to examine the workforce implication of service delivery changes, including how to ensure that staff are appropriately equipped and supported to deal effectively with the demands of their role.

Paramedics identified a degree of progress in relation to the profile of patient safety within their organisations but the apparent desire within trusts to prioritise safety improvement was felt to be constrained by service demands and available resources. Attempts to prioritise patient safety appear to focus on ensuring that formal systems are in place (e.g. reporting and communication). Concerns were expressed over how well these systems function to support improvement, for example how incident reports are responded to and whether lessons learned are communicated to ambulance staff within and between trusts. Consideration could be given to identifying ways of supporting ambulance service trusts to develop the safety culture within their organisation.

Service users attributed the increased demand for ambulance services to difficulties in identifying and accessing alternatives. They were receptive to non-conveyance options but felt that lack of awareness of staff roles and skills may cause concern when patients expect conveyance to A&E.

• Recommendations for research

The workshop attendees identified a range of areas for attention in relation to intervention and research, which are provided in Chapter 6 (see Suggestions for potential interventions and research ). The following recommendations for research are based on the study findings:

• Limited and variable access to services in the wider health and social care system is a significant barrier to reducing inappropriate conveyance to A&E. More research is needed to identify effective ways of improving the delivery of care across service boundaries, particularly for patients with limited options at present (e.g. those with mental health issues, those at the end of life and older patients). Research should address structural and attitudinal barriers and how these might be overcome.
• Ambulance services are increasingly focused on reducing conveyance to A&E and they need to ensure that there is an appropriately skilled workforce to minimise the potential risk. The evidence points to at least two issues: (1) training and skills and (2) the cultural profile of paramedics in the NHS, that is, whether others view their decisions as credible. Research could explore the impact of enhanced skills on patient care and on staff, for example the impact of increased training in urgent rather than emergency care. This would also need to address potential cultural barriers to the effective use of new skills.
• Research to explore the impact of different aspects of safety culture on ambulance service staff and the delivery of patient care (e.g. incident reporting, communication, teamworking, and training) could include comparisons across different staff groups and the identification of areas for improvement, as well as interventions that could potentially be tested.
• The increased breadth of decision-making by ambulance service crews with advanced skills includes more diagnostics; therefore, there is a need to look at the diagnostic process and potential causes of error in this environment.
• There is a need to explore whether there are efficient and safe ways of improving telephone triage decisions to reduce over-triage, particularly in relation to calls requiring an 8-minute response. This could include examining training and staffing levels, a higher level of clinician involvement or other forms of decision support.
• There is a need to explore public awareness of, attitudes towards, beliefs about and expectations of the ambulance service and the wider urgent and emergency care network and the scope for behaviour change interventions, for example communication of information about access to and use of services; empowering the public through equipping them with the skills to directly access the services that best meet their needs; and informing the public about the self-management of chronic conditions.
• A number of performance measures were identified engendering perverse motivations leading to suboptimal resource utilisation. An ongoing NIHR Programme Grant for Applied Research (RP-PG-0609–10195; ‘Pre-hospital Outcomes for Evidence-Based Evaluation’) aims to develop new ways of measuring ambulance service performance. It is important that evaluations of new performance metrics or other innovations (e.g. Make Ready ambulances, potential telehealth technologies or decision-support tools) address their potential impact on patient safety.

Included under terms of UK Non-commercial Government License .

• Cite this Page O’Hara R, Johnson M, Hirst E, et al. A qualitative study of decision-making and safety in ambulance service transitions. Southampton (UK): NIHR Journals Library; 2014 Dec. (Health Services and Delivery Research, No. 2.56.) Chapter 8, Conclusions and recommendations.
• PDF version of this title (1.5M)

In this Page

Other titles in this collection.

• Health Services and Delivery Research

Recent Activity

• Conclusions and recommendations - A qualitative study of decision-making and saf... Conclusions and recommendations - A qualitative study of decision-making and safety in ambulance service transitions

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

Connect with NLM

National Library of Medicine 8600 Rockville Pike Bethesda, MD 20894

Web Policies FOIA HHS Vulnerability Disclosure

Help Accessibility Careers

A Survey of Attitudes and Actions on Dual Use Research in the Life Sciences: A Collaborative Effort of the National Research Council and the American Association for the Advancement of Science (2009)

Chapter: 4 conclusions and recommendations.

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

4 Conclusions and Recommendations INTRODUCTION The results of the survey provide some of the first empirical data about the perceptions of a sample of U.S. life scientists of the potential risks of misuse of legitimate scientific research for malicious purposes. The survey obtained information from a diverse group of academic, gov- ernment, and industry researchers. The survey data provide evidence about how the respondents perceive the sources of risk related to dual use research, the actions that some scientists are taking to reduce the risk of misuse of science, and the prospects for acceptance of various policy proposals aimed at reducing the risks of misuse of legitimate life science research. While useful, the results of the survey must be viewed with caution because of the low response rate and possible response bias. Scientists who may be involved in biodefense or select agent research, for example, may be more aware of the dual use dilemma and thus more likely to have responded to the survey. In addition, a few of the questions could have been interpreted in multiple ways. Despite the limitations, which are discussed in detail in Chapter 2, the committee believes that the data obtained in this study offer valuable insights and new information. Overall, the survey findings suggest that there is considerable support for models of oversight that rely on the responsible conduct of research and self-governance by the scientific community. The responses also sug- gest, however, that there is a critical need to clarify the scope of research activities of high concern and to determine the appropriate actions that 115 

116 DUAL USE RESEARCH IN THE LIFE SCIENCES members of the life sciences community can take to reduce the risk of misuse of science for bioweapons development or bioterrorism. The rest of the chapter provides a summary of the survey findings. Following a brief summary of the perceptions of risks of the scientists who responded to the survey, three key areas of current and potential activities and policies are highlighted: actions that life scientists have already taken to address dual use concerns, mechanisms for the oversight of research, and issues related to education and outreach. The chapter closes with the committee’s recommendations for furthering education and outreach activities that are based on the findings of the survey and its own judg- ments and analysis. PERCEPTIONS OF RISK The findings suggest that, on average, the scientists who responded to the survey perceive a potential, but not overwhelming, risk of bioter- rorism and that the risk is greater outside the United States. On average, the respondents believed that there is a 51 percent chance that there will be an act of bioterrorism somewhere in the world in the next 5 years and a 35 percent chance that there will be an act of bioterrorism in the United States in the next 5 years. Three-quarters of the respondents believe that a preference for other means of attack is the primary reason why there have been only a few acts of bioterrorism to date; overwhelmingly, 87 percent of respondents said that they believe that terrorists are not deterred by the threat of being caught and punished. Fewer scientists considered a lack of knowledge (46 percent) or access to equipment (51 percent) or agents (36 percent) to be significant barriers. It may be that one’s perceived risk of such an attack is related to one’s support for taking measures to reduce the risks that life sciences research might be misused. With regard to the chance that the knowledge, tools, or techniques from dual use research will facilitate bioterrorism, the respondents per- ceive a 28 percent chance, on average, of such a bioterror attack within the next 5 years. Half of the respondents thought that if someone wanted to create a harmful biological agent, the Internet would be the most likely place to provide sufficient information for life scientists with college- level training. Other sources of information—articles in scientific journals (40 percent), personal communications (38 percent), and presentations at professional meetings (18 percent)—were considered relatively less likely sources, although on average 45 percent of respondents answered “Don’t Know” to these questions. 

CONCLUSIONS AND RECOMMENDATIONS 117 ACTIONS TAKEN BY LIFE SCIENTISTS IN RESPONSE TO DUAL USE CONCERNS Although the responses to the survey indicate that bioterrorism prob- ably is not perceived to present a serious immediate risk to U.S. or global security, the survey results also indicate that there is already concern about dual use issues among some of the life scientists who responded. Fifteen percent of the respondents (260 individuals out of 1,744) indicated that they are so concerned about dual use research that they have taken actions, even in the absence of guidelines or mandatory regulations from the U.S. government. Some respondents reported that they had broken collaborations, not conducted some research projects, or not commu- nicated research results. The results indicate that more scientists have modified their research activities than some members of the committee expected on the basis of previous reports of manuscripts that have been modified or not published because of dual use concerns. Interestingly, many of the actions that the respondents reported tak- ing to mitigate concerns occurred before the publication stage; much of the behavior change occurred during the research design, collaboration, and early communication stages. Of particular interest and concern to the committee, a few respondents commented on their concerns about for- eigners as potential security risks, which may be reflected in the reported avoidance of some collaborations. The survey results suggest that: (1) some life scientists in the United States may be willing to consider self-governance aimed at the respon- sible scientific conduct for dual use research, and (2) some life scientists in the United States are already acting, even in the absence of govern- ment regulations and guidance, to protect against the perceived risk of misuse of dual use research. OVERSIGHT MECHANISMS With a proposed oversight framework for dual use research of concern proposed by NSABB in June 2007 now under consideration within the U.S. government, the survey was an opportunity to assess scientists’ atti- tudes toward specific policy options. Many of the respondents indicated that they believe that personal responsibility, including measures such as codes of conduct, could foster a positive culture within the scientific com- munity to evaluate the potential consequences of their research for public safety and national security. They also indicated that they believe that individual researchers, professional scientific societies, institutions, and scientific journals should be responsible for evaluating dual use potential of research and/or fostering the culture of scientific responsibility. A majority of those who responded to the survey favored self-gov- 

118 DUAL USE RESEARCH IN THE LIFE SCIENCES ernance mechanisms for dealing with dual use research of concern, such as those proposed by the Fink report (NRC 2004a), rather than addi- tional mandatory government regulations. In addition to the low level of support for greater federal oversight (26 percent), the individual com- ments indicated a belief that increased government oversight of dual use research would be counterproductive by inhibiting the research needed to combat emerging infectious diseases and bioterrorism as well as being potentially harmful to the scientific enterprise more generally. The survey suggests that most of the respondents (82 percent) favor their professional societies’ prescribing a code of responsible conduct to help prevent misuse of life sciences research. However, many respondents (66 percent) did not know whether the societies to which they belonged already had codes that address dual use issues, and some of the societies most frequently cited do not in fact have a code. There was substantially less support (38 percent agree or strongly agree) for a Hippocratic-style oath. The results also indicate potential support for journals having bios- ecurity policies. Yet, most of the respondents did not know if any of the journals in which they have published or to which they have submitted manuscripts have those policies. Moreover, more than half of those who responded to the survey strongly disagreed or disagreed with restrictions on personal communication, altering or removing methods or findings from scientific publications, or limiting publication itself. The survey points to a likely preference for self-governance measures to provide oversight of dual use research. There was substantially less support for mandatory measures that might be imposed by regulation, although the results varied for different policy measures. The results indicate that there may be greater support for restrictions on access to biological agents (just under 50 percent of the respondents said they agree or strongly agree) and certifications of researchers (just over 40 percent of the respondents said they agree or strongly agree) than for any control of scientific knowledge generated from the research or through informa- tion exchange (only 20 to 30 percent of respondents supported these measures). Table 4-1 provides a list of the level of support for the various measures addressed in the survey. The survey results suggest there is support for: 1. Greater oversight that is not federally mandated, 2. Self-governance mechanisms as an approach for preventing misuse of life science research and knowledge, 3. Professional and scientific societies adopting codes of conduct that include dual use research as suggested in the Fink report (NRC 2004a), 4. Establishing and implementing policies for authors and reviewers 

CONCLUSIONS AND RECOMMENDATIONS 119 TABLE 4-1  Summary of Results Regarding Support for Measures of Personal and Institutional Responsibility Strongly Agree or Agree Measures of Personal or Institutional Responsibility (or Respond Yes*) (%) Principal investigators should be responsible for the 87 initial evaluation of the dual use potential of their life sciences research. Principal investigators should be responsible for training 86 lab staff, students, and visiting scientists about dual use research. Should professional science societies have codes for the 82* responsible conduct of dual use life sciences research? University and college students should receive 68 educational lectures and materials on dual use life sciences research. Scientists should provide formal assurance to their 67 institution that they are assessing their work for dual use potential. Funding agencies should require grantees to attest on 60 grant applications that they have considered dual use implications of their proposed research. Should scientific journals have policies regarding 57* publication of dual use research? Institutions should provide mandatory training for 55 scientists regarding dual use life sciences research. Greater restrictions should be placed on access to specific 47 biological agents or toxins. Researchers conducting dual use research should be 42 certified. All grant proposals for life sciences research with dual 41 use potential should be reviewed by a researcher’s institution prior to submission for funding. Scientists conducting or managing research should take 38 an oath. Research findings should be classified based on their dual 28 use potential. Dual use research needs greater federal oversight. 26 Certain experimental methods or findings should be 22 altered or removed prior to publication or presentation. Certain biological equipment that is commonly used in 21 life science research should be licensed. There should be restrictions on disclosure of details 21 about the research or its findings through personal communication. There should be restrictions on publication of findings 21 based on their dual use potential. SOURCE: NRC/AAAS Survey of Life Scientists; data analysis by staff. 

120 DUAL USE RESEARCH IN THE LIFE SCIENCES to consider the dual use potential of research manuscripts submitted to journals. The survey results suggest there is opposition to: 1. Mandatory government regulations to govern the conduct of dual use research and the communication of knowledge from that research; 2. Other mandatory oversight actions, such as oaths or licensing of scientists. Based on the survey results and its own analysis, the committee believes that a basis of support exists within the U.S. scientific commu- nity for measures that, taken together, could lead to the development of a system of self-governance for the oversight of key aspects of dual use research. EDUCATION AND OUTREACH A major reason for conducting the survey was to inform efforts for education and awareness-raising about dual use research by providing empirical data on the attitudes of a sample of the life sciences community. In general, the respondents to this survey would likely support educa- tional and outreach activities aimed at raising awareness of the dual use dilemma. The respondents indicated that they supported educational materials and lectures on dual use research for students. They also sup- ported mandatory training by institutions for practicing life scientists regarding dual use research of concern. The survey results also highlight the need to better define the scope of dual use research of concern. Fewer than half of the respondents who indicated that they were carrying out dual use research activities felt that their research fell into one of the seven categories of research of concern specified by the NSABB. The dual use experiments of concern as listed in the Fink report (NRC 2004a) and by the NSABB are all based on microbial research, but other relevant research, such as theoretical research, scenario development, or applied research (e.g., pharmaceutical formulations or neuroscience research) can be of dual use concern. In their individual comments, a number of respondents stressed the difficulties of defining dual use, as did participants in the focus groups used to develop the survey. Clearly a better understanding of the scope of dual use research of real concern would help any educational or outreach activities aimed at raising the awareness of life scientists so that appropriate actions can be taken. 

CONCLUSIONS AND RECOMMENDATIONS 121 Based on the survey results and its own analysis, the committee believes that there is support for mandatory education and training about dual use issues, most likely as part of ethics and responsible conduct of research training. RECOMMENDATIONS The committee believes that the survey raises several hypotheses that merit further research about the views of life scientists about oversight policies and education and outreach efforts to address concerns about dual use issues in the life sciences. In particular, based on the survey results and its own deliberations, the committee offers the following recommendations: Oversight, Education, and Outreach 1. Explore how to continue and to expand the dialogue within the life sciences community about dual use research of concern. 2. Explore ways to provide guidance to the life sciences community about appropriate actions that can be taken to protect against the misuse of dual use research. 3. Seek to better define the scope of knowledge in the life sciences that may be at greatest risk for misuse and to provide the life sciences community with criteria for recognizing dual use research of concern. 4. Encourage journals that have biosecurity policies or plan to adopt them in the future and the professional and scientific societies that have or plan to develop codes of conduct to communicate those policies more effectively. Further Research 1. Examine the effectiveness of existing educational programs and how they can be enhanced and focused. 2. Seek to extend educational and awareness-raising efforts being conducted in the United States to the broad international scientific community. 3. Examine how education and outreach activities can be developed to guide the life science community’s response to concerns about dual use research so as to ensure that actions taken by the community are appro- priate and contribute to advancing scientific knowledge while protecting national security. 4. Conduct additional surveys, interviews, or focus groups of U.S. life scientists that better represent the full community, with higher response 

122 DUAL USE RESEARCH IN THE LIFE SCIENCES rates than the current study was able to achieve, and the ability to assess potential bias, in order to gain  i.  a better understanding of the awareness of a broader range of U.S. life scientists about dual use research of concern and the measure that they would support to reduce the threat that research in the life sciences could be subverted to do harm;  ii.  a better understanding of the types of behavioral changes being made in response to dual use concerns to determine if actions by life scientists are contributing to national security or harming scientific research; such research is critical given the actions that the current survey suggests are being taken;  iii.  more detailed information about the types of changes scientists are making or scientists’ thoughts about dual use issues, experiments of concern, and select agents;  iv.  a better understanding of scientists’ experiences with educa- tion on this topic and their views about the content and delivery of educational and training materials. 5. Conduct additional surveys of life scientists outside the United States that would enable comparisons of attitudes toward dual use research of concern and inform educational and outreach programs so that they can be effective on a global scale. Such knowledge could also facilitate international discussions of potential measures to address dual use concerns. 

The same technologies that fuel scientific advances also pose potential risks—that the knowledge, tools, and techniques gained through legitimate biotechnology research could be misused to create biological weapons or for bioterrorism. This is often called the dual use dilemma of the life sciences. Yet even research with the greatest potential for misuse may offer significant benefits. Determining how to constrain the danger without harming essential scientific research is critical for national security as well as prosperity and well-being.

This book discusses a 2007 survey of American Association for the Advancement of Science (AAAS) members in the life sciences about their knowledge of dual use issues and attitudes about their responsibilities to help mitigate the risks of misuse of their research.

Overall, the results suggest that there may be considerable support for approaches to oversight that rely on measures that are developed and implemented by the scientific community itself. The responses also suggest that there is a need to clarify the scope of research activities of concern and to provide guidance about what actions scientists can take to reduce the risk that their research will be misused by those with malicious intent.

READ FREE ONLINE

Welcome to OpenBook!

You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

Do you want to take a quick tour of the OpenBook's features?

Show this book's table of contents , where you can jump to any chapter by name.

...or use these buttons to go back to the previous chapter or skip to the next one.

Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

To search the entire text of this book, type in your search term here and press Enter .

Share a link to this book page on your preferred social network or via email.

View our suggested citation for this chapter.

Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

Get Email Updates

Do you enjoy reading reports from the Academies online for free ? Sign up for email notifications and we'll let you know about new publications in your areas of interest when they're released.

• Differences between a finding, a conclusion, and a recommendation: examples
• Learning Center

Table of Contents

• Defining the Terms: What Is a Finding, a Conclusion, and a Recommendation in M&E?
• Why It Matters: Understanding the Importance of Differentiating between Findings, Conclusions, and Recommendations in M&E
• How to Identify and Distinguish between Findings, Conclusions, and Recommendations in M&E
• How to Communicate Findings, Conclusions, and Recommendations Effectively in M&E Reports
• The Benefits of Clear and Accurate Reporting of Findings, Conclusions, and Recommendations in M&E

1. Defining the Terms: What Is a Finding, a Conclusion, and a Recommendation in M&E?

Monitoring and Evaluation (M&E) is a critical process for assessing the effectiveness of development programs and policies. During the M&E process, evaluators collect and analyze data to draw conclusions and make recommendations for program improvement. In M&E, it is essential to differentiate between findings, conclusions, and recommendations to ensure that the evaluation report accurately reflects the program’s strengths, weaknesses, and potential areas for improvement.

In an evaluation report, a finding, a conclusion, and a recommendation serve different purposes and convey different information. Here are the differences between these three elements:

1.1 Finding

A finding is a factual statement that is based on evidence collected during the evaluation . It describes what was observed, heard, or experienced during the evaluation process. A finding should be objective, unbiased, and supported by data. Findings are typically presented in the form of a summary or a list of key points, and they provide the basis for the evaluation’s conclusions and recommendations.

Findings are an important part of the evaluation process, as they provide objective and unbiased information about what was observed, heard, or experienced during the evaluation. Findings are based on the evidence collected during the evaluation, and they should be supported by data and other relevant information. They are typically presented in a summary or list format, and they serve as the basis for the evaluation’s conclusions and recommendations. By presenting clear and accurate findings, evaluators can help stakeholders understand the strengths and weaknesses of the program or initiative being evaluated, and identify opportunities for improvement.

Catch HR’s eye instantly?

• Resume Review
• Resume Writing
• Resume Optimization

Premier global development resume service since 2012

Stand Out with a Pro Resume

1.2 Examples of Finding

Here are some examples of findings in M&E:

• “Program participants reported a high level of satisfaction with the quality of training provided, with 85% rating it as good or excellent.”
• “The program was successful in increasing the number of girls enrolled in secondary school, with a 25% increase observed in the target communities.”
• “Program beneficiaries reported improved access to healthcare services, with a 40% increase in the number of individuals accessing healthcare facilities in the program area.”
• “The program’s training curriculum was found to be outdated and ineffective, with only 30% of participants reporting that the training was useful.”
• “The program’s monitoring and evaluation system was found to be inadequate, with data quality issues and insufficient capacity among staff to carry out effective monitoring and evaluation activities.”

These findings represent objective, measurable results of the data collected during the M&E process, and can be used to inform program design and implementation, as well as to draw conclusions and make recommendations for improvement.

1.3 Conclusion

A conclusion is a judgment or interpretation of the findings based on the evidence collected during the evaluation. It is typically expressed in terms of what the findings mean or what can be inferred from them. Conclusions should be logical, evidence-based, and free from personal bias or opinion.

Conclusions often answer the evaluation questions or objectives, and they provide insights into the effectiveness or impact of the program, project, or intervention being evaluated. By synthesizing the findings into a cohesive narrative, evaluators can provide stakeholders with a clear and actionable understanding of the program or initiative being evaluated. Conclusions can also inform future planning and decision-making, by identifying areas for improvement and highlighting successful strategies or interventions. Overall, conclusions are a crucial component of the evaluation process, as they help stakeholders make informed decisions about the programs and initiatives they are involved in.

1.4 Examples of Conclusion

Here are some examples of conclusions in M&E:

• Based on the data collected, it can be concluded that the program was successful in achieving its objective of increasing access to clean water in the target communities.”
• “The data indicates that the program’s training curriculum is ineffective and in need of revision in order to better meet the needs of participants.”
• “It can be concluded that the program’s community mobilization efforts were successful in increasing community participation and ownership of the program.”
• “Based on the data collected, it is concluded that the program’s impact on improving maternal and child health outcomes is limited and further efforts are needed to address the underlying health system and infrastructure issues.”
• “The data collected indicates that the program’s impact on reducing poverty in the target area is modest, but still significant, and further investment in complementary programs may be needed to achieve more substantial reductions in poverty rates.”
• These conclusions are based on the evidence presented in the findings and represent the interpretation or explanation of the meaning of the findings. They help to provide insight into the impact and effectiveness of the program and can be used to make recommendations for improvement.

1.5 Recommendation

A recommendation is a specific action or set of actions proposed based on the findings and conclusions of the evaluation. Recommendations should be practical, feasible, and tailored to the needs of the stakeholders who will be implementing them. They should be supported by evidence and aligned with the goals of the program, project, or intervention being evaluated.

Recommendations often provide guidance on how to improve the effectiveness or efficiency of the program, project, or intervention, and they can help to inform decision-making and resource allocation. By presenting clear and actionable recommendations, evaluators can help stakeholders identify and prioritize areas for improvement, and develop strategies to address identified issues. Recommendations can also serve as a roadmap for future planning and implementation and can help to ensure that the program or initiative continues to achieve its intended outcomes over time.

Overall, recommendations are an essential component of the evaluation process, as they help to bridge the gap between evaluation findings and programmatic action. By proposing specific and evidence-based actions, evaluators can help to ensure that evaluation results are translated into meaningful improvements in program design, implementation, and outcomes.

1.6 Examples of Recommendation

Here are some examples of recommendations in M&E:

• “To improve the effectiveness of the program’s training, the curriculum should be revised to better meet the needs of participants, with a focus on practical, hands-on learning activities.”
• “To address the data quality issues identified in the monitoring and evaluation system, staff should receive additional training on data collection and management, and the system should be revised to incorporate additional quality control measures.”
• “To build on the success of the program’s community mobilization efforts, further investments should be made in strengthening community-based organizations and networks, and in promoting greater community participation in program planning and decision-making.”
• “To improve the program’s impact on maternal and child health outcomes, efforts should be made to address underlying health system and infrastructure issues, such as improving access to health facilities and training health workers.”
• “To achieve more substantial reductions in poverty rates in the target area, complementary programs should be implemented to address issues such as economic development, education, and social protection.”

These recommendations are specific actions that can be taken based on the findings and conclusions of the M&E process. They should be practical, feasible, and based on the evidence presented in the evaluation report. By implementing these recommendations, development practitioners can improve program effectiveness and impact, and better meet the needs of the target population.

2. Why It Matters: Understanding the Importance of Differentiating between Findings, Conclusions, and Recommendations in M&E

Differentiating between findings, conclusions, and recommendations is crucial in M&E for several reasons. First, it ensures accuracy and clarity in the evaluation report. Findings, conclusions, and recommendations are distinct components of an evaluation report, and they serve different purposes. By clearly defining and differentiating these components, evaluators can ensure that the report accurately reflects the program’s strengths and weaknesses, potential areas for improvement, and the evidence supporting the evaluation’s conclusions.

Second, differentiating between findings, conclusions, and recommendations helps to facilitate evidence-based decision-making. By clearly presenting the evidence supporting the evaluation’s findings and conclusions, and making recommendations based on that evidence, evaluators can help program managers and policymakers make informed decisions about program design, implementation, and resource allocation.

Finally, differentiating between findings, conclusions, and recommendations can help to increase the credibility and trustworthiness of the evaluation report. Clear and accurate reporting of findings, conclusions, and recommendations helps to ensure that stakeholders understand the evaluation’s results and recommendations, and can have confidence in the evaluation’s rigor and objectivity.

In summary, differentiating between findings, conclusions, and recommendations is essential in M&E to ensure accuracy and clarity in the evaluation report, facilitate evidence-based decision-making, and increase the credibility and trustworthiness of the evaluation.

3. How to Identify and Distinguish between Findings, Conclusions, and Recommendations in M&E

Identifying and distinguishing between findings, conclusions, and recommendations in M&E requires careful consideration of the evidence and the purpose of each component. Here are some tips for identifying and distinguishing between findings, conclusions, and recommendations in M&E:

• Findings: Findings are the results of the data analysis and should be objective and evidence-based. To identify findings, look for statements that summarize the data collected and analyzed during the evaluation. Findings should be specific, measurable, and clearly stated.
• Conclusions: Conclusions are interpretations of the findings and should be supported by the evidence. To distinguish conclusions from findings, look for statements that interpret or explain the meaning of the findings. Conclusions should be logical and clearly explained, and should take into account any limitations of the data or analysis.
• Recommendations: Recommendations are specific actions that can be taken based on the findings and conclusions. To distinguish recommendations from conclusions, look for statements that propose actions to address the issues identified in the evaluation. Recommendations should be practical, feasible, and clearly explained, and should be based on the evidence presented in the findings and conclusions.

It is also important to ensure that each component is clearly labeled and presented in a logical order in the evaluation report. Findings should be presented first, followed by conclusions and then recommendations.

In summary, identifying and distinguishing between findings, conclusions, and recommendations in M&E requires careful consideration of the evidence and the purpose of each component. By ensuring that each component is clearly labeled and presented in a logical order, evaluators can help to ensure that the evaluation report accurately reflects the program’s strengths, weaknesses, and potential areas for improvement, and facilitates evidence-based decision-making.

4. How to Communicate Findings, Conclusions, and Recommendations Effectively in M&E Reports

Communicating findings, conclusions, and recommendations effectively in M&E reports is critical to ensuring that stakeholders understand the evaluation’s results and recommendations and can use them to inform decision-making. Here are some tips for communicating findings, conclusions, and recommendations effectively in M&E reports:

• Use clear and concise language: Use clear, simple language to explain the findings, conclusions, and recommendations. Avoid technical jargon and use examples to illustrate key points.
• Present data visually: Use tables, graphs, and charts to present data visually, making it easier for stakeholders to understand and interpret the findings.
• Provide context: Provide context for the findings, conclusions, and recommendations by explaining the evaluation’s purpose, methodology, and limitations. This helps stakeholders understand the scope and significance of the evaluation’s results and recommendations.
• Highlight key points: Use headings, bullet points, and other formatting techniques to highlight key points, making it easier for stakeholders to identify and remember the most important findings, conclusions, and recommendations.
• Be objective: Present the findings, conclusions, and recommendations objectively and avoid bias. This helps to ensure that stakeholders have confidence in the evaluation’s rigor and objectivity.
• Tailor the report to the audience: Tailor the report to the audience by using language and examples that are relevant to their interests and needs. This helps to ensure that the report is accessible and useful to stakeholders.

In summary, communicating findings, conclusions, and recommendations effectively in M&E reports requires clear and concise language, visual presentation of data, contextualization, highlighting of key points, objectivity, and audience-tailoring. By following these tips, evaluators can help to ensure that stakeholders understand the evaluation’s results and recommendations and can use them to inform decision-making.

5. The Benefits of Clear and Accurate Reporting of Findings, Conclusions, and Recommendations in M&E

Clear and accurate reporting of M&E findings, conclusions, and recommendations has many benefits for development programs and policies. One of the most significant benefits is improved program design and implementation. By clearly identifying areas for improvement, program designers and implementers can make adjustments that lead to more effective and efficient programs that better meet the needs of the target population.

Another important benefit is evidence-based decision-making. When M&E findings, conclusions, and recommendations are reported accurately and clearly, decision-makers have access to reliable information on which to base their decisions. This can lead to more informed decisions about program design, implementation, and resource allocation.

Clear and accurate reporting of M&E findings, conclusions, and recommendations also supports accountability. By reporting transparently on program performance, development practitioners can build trust and support among stakeholders, including program beneficiaries, donors, and the general public.

M&E findings, conclusions, and recommendations also support continuous learning and improvement. By identifying best practices, lessons learned, and areas for improvement, development practitioners can use this information to improve future programming.

Finally, clear and accurate reporting of M&E findings, conclusions, and recommendations can increase program impact. By identifying areas for improvement and supporting evidence-based decision-making, development programs can have a greater positive impact on the communities they serve.

In summary, clear and accurate reporting of M&E findings, conclusions, and recommendations is critical for improving program design and implementation, supporting evidence-based decision-making, ensuring accountability, supporting continuous learning and improvement, and increasing program impact. By prioritizing clear and accurate reporting, development practitioners can ensure that their programs are effective, efficient, and have a positive impact on the communities they serve.

Very interesting reading which clearly explain the M&E finding, recommendation and conclusion, which sometimes the terms can be confusing

Leave a Comment Cancel Reply

Your email address will not be published.

How strong is my Resume?

Only 2% of resumes land interviews.

Land a better, higher-paying career

Jobs for You

Information coordinator – usaid guatemala planning and program support office.

• United States (Remote)

Director of Market Influence

• Atlanta, GA, USA
• Habitat for Humanity International

CLA Coordinator/Report Officer

• Bosnia and Herzegovina

Director of Collaborating, Learning, and Adapting (CLA) – Bosnia and Herzegovina

Senior transition and closeout consultant, global health technical and mission support (gh-tams), intern – pricing and budget.

• United States

Research Technical Advisor

• South Bend, IN, USA (Remote)
• University of Notre Dame

YMELP II Short-Term Technical Assistance (STTA)

Water, sanitation and hygiene advisor (wash) – usaid/drc.

• Democratic Republic of the Congo

Health Supply Chain Specialist – USAID/DRC

Chief of party – bosnia and herzegovina, project manager i, business development associate, director of finance and administration, request for information – collecting information on potential partners for local works evaluation.

• Washington, USA

Services you might be interested in

Useful guides ....

How to Create a Strong Resume

Monitoring And Evaluation Specialist Resume

Resume Length for the International Development Sector

Types of Evaluation

Monitoring, Evaluation, Accountability, and Learning (MEAL)

LAND A JOB REFERRAL IN 2 WEEKS (NO ONLINE APPS!)

Sign Up & To Get My Free Referral Toolkit Now: