abstract example master thesis

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

The Dissertation Abstract: 101

How to write a clear & concise abstract (with examples).

By:   Madeline Fink (MSc) Reviewed By: Derek Jansen (MBA)   | June 2020

So, you’ve (finally) finished your thesis or dissertation or thesis. Now it’s time to write up your abstract (sometimes also called the executive summary). If you’re here, chances are you’re not quite sure what you need to cover in this section, or how to go about writing it. Fear not – we’ll explain it all in plain language , step by step , with clear examples .

Overview: The Dissertation/Thesis Abstract

• What exactly is a dissertation (or thesis) abstract
• What’s the purpose and function of the abstract
• Why is the abstract so important
• How to write a high-quality dissertation abstract
• Example/sample of a quality abstract
• Quick tips to write a high-quality dissertation abstract

What is an abstract?

Simply put, the abstract in a dissertation or thesis is a short (but well structured) summary that outlines the most important points of your research (i.e. the key takeaways). The abstract is usually 1 paragraph or about 300-500 words long (about one page), but but this can vary between universities.

A quick note regarding terminology – strictly speaking, an abstract and an executive summary are two different things when it comes to academic publications. Typically, an abstract only states what the research will be about, but doesn’t explore the findings – whereas an executive summary covers both . However, in the context of a dissertation or thesis, the abstract usually covers both, providing a summary of the full project.

In terms of content, a good dissertation abstract usually covers the following points:

• The purpose of the research (what’s it about and why’s that important)
• The methodology (how you carried out the research)
• The key research findings (what answers you found)
• The implications of these findings (what these answers mean)

We’ll explain each of these in more detail a little later in this post. Buckle up.

What’s the purpose of the abstract?

A dissertation abstract has two main functions:

The first purpose is to  inform potential readers  of the main idea of your research without them having to read your entire piece of work. Specifically, it needs to communicate what your research is about (what were you trying to find out) and what your findings were . When readers are deciding whether to read your dissertation or thesis, the abstract is the first part they’ll consider. 

The second purpose of the abstract is to  inform search engines and dissertation databases  as they index your dissertation or thesis. The keywords and phrases in your abstract (as well as your keyword list) will often be used by these search engines to categorize your work and make it accessible to users. 

Simply put, your abstract is your shopfront display window – it’s what passers-by (both human and digital) will look at before deciding to step inside. 

Why’s it so important?

The short answer – because most people don’t have time to read your full dissertation or thesis! Time is money, after all…

If you think back to when you undertook your literature review , you’ll quickly realise just how important abstracts are! Researchers reviewing the literature on any given topic face a mountain of reading, so they need to optimise their approach. A good dissertation abstract gives the reader a “TLDR” version of your work – it helps them decide whether to continue to read it in its entirety. So, your abstract, as your shopfront display window, needs to “sell” your research to time-poor readers.

You might be thinking, “but I don’t plan to publish my dissertation”. Even so, you still need to provide an impactful abstract for your markers. Your ability to concisely summarise your work is one of the things they’re assessing, so it’s vital to invest time and effort into crafting an enticing shop window.  

A good abstract also has an added purpose for grad students . As a freshly minted graduate, your dissertation or thesis is often your most significant professional accomplishment and highlights where your unique expertise lies. Potential employers who want to know about this expertise are likely to only read the abstract (as opposed to reading your entire document) – so it needs to be good!

Think about it this way – if your thesis or dissertation were a book, then the abstract would be the blurb on the back cover. For better or worse, readers will absolutely judge your book by its cover .

How to write your abstract

As we touched on earlier, your abstract should cover four important aspects of your research: the purpose , methodology , findings , and implications . Therefore, the structure of your dissertation or thesis abstract needs to reflect these four essentials, in the same order.  Let’s take a closer look at each of them, step by step:

Step 1: Describe the purpose and value of your research

Here you need to concisely explain the purpose and value of your research. In other words, you need to explain what your research set out to discover and why that’s important. When stating the purpose of research, you need to clearly discuss the following:

• What were your research aims and research questions ?
• Why were these aims and questions important?

It’s essential to make this section extremely clear, concise and convincing . As the opening section, this is where you’ll “hook” your reader (marker) in and get them interested in your project. If you don’t put in the effort here, you’ll likely lose their interest.

Step 2: Briefly outline your study’s methodology

In this part of your abstract, you need to very briefly explain how you went about answering your research questions . In other words, what research design and methodology you adopted in your research. Some important questions to address here include:

• Did you take a qualitative or quantitative approach ?
• Who/what did your sample consist of?
• How did you collect your data?
• How did you analyse your data?

Simply put, this section needs to address the “ how ” of your research. It doesn’t need to be lengthy (this is just a summary, after all), but it should clearly address the four questions above.

Need a helping hand?

Step 3: Present your key findings

Next, you need to briefly highlight the key findings . Your research likely produced a wealth of data and findings, so there may be a temptation to ramble here. However, this section is just about the key findings – in other words, the answers to the original questions that you set out to address.

Again, brevity and clarity are important here. You need to concisely present the most important findings for your reader.

Step 4: Describe the implications of your research

Have you ever found yourself reading through a large report, struggling to figure out what all the findings mean in terms of the bigger picture? Well, that’s the purpose of the implications section – to highlight the “so what?” of your research. 

In this part of your abstract, you should address the following questions:

• What is the impact of your research findings on the industry /field investigated? In other words, what’s the impact on the “real world”. 
• What is the impact of your findings on the existing body of knowledge ? For example, do they support the existing research?
• What might your findings mean for future research conducted on your topic?

If you include these four essential ingredients in your dissertation abstract, you’ll be on headed in a good direction.

Example: Dissertation/thesis abstract

Here is an example of an abstract from a master’s thesis, with the purpose , methods , findings , and implications colour coded.

The U.S. citizenship application process is a legal and symbolic journey shaped by many cultural processes. This research project aims to bring to light the experiences of immigrants and citizenship applicants living in Dallas, Texas, to promote a better understanding of Dallas’ increasingly diverse population. Additionally, the purpose of this project is to provide insights to a specific client, the office of Dallas Welcoming Communities and Immigrant Affairs, about Dallas’ lawful permanent residents who are eligible for citizenship and their reasons for pursuing citizenship status . The data for this project was collected through observation at various citizenship workshops and community events, as well as through semi-structured interviews with 14 U.S. citizenship applicants . Reasons for applying for U.S. citizenship discussed in this project include a desire for membership in U.S. society, access to better educational and economic opportunities, improved ease of travel and the desire to vote. Barriers to the citizenship process discussed in this project include the amount of time one must dedicate to the application, lack of clear knowledge about the process and the financial cost of the application. Other themes include the effects of capital on applicant’s experience with the citizenship process, symbolic meanings of citizenship, transnationalism and ideas of deserving and undeserving surrounding the issues of residency and U.S. citizenship. These findings indicate the need for educational resources and mentorship for Dallas-area residents applying for U.S. citizenship, as well as a need for local government programs that foster a sense of community among citizenship applicants and their neighbours.

Practical tips for writing your abstract

When crafting the abstract for your dissertation or thesis, the most powerful technique you can use is to try and put yourself in the shoes of a potential reader. Assume the reader is not an expert in the field, but is interested in the research area. In other words, write for the intelligent layman, not for the seasoned topic expert. 

Start by trying to answer the question “why should I read this dissertation?”

Remember the WWHS.

Make sure you include the  what , why ,  how , and  so what  of your research in your abstract:

• What you studied (who and where are included in this part)
• Why the topic was important
• How you designed your study (i.e. your research methodology)
• So what were the big findings and implications of your research

Keep it simple.

Use terminology appropriate to your field of study, but don’t overload your abstract with big words and jargon that cloud the meaning and make your writing difficult to digest. A good abstract should appeal to all levels of potential readers and should be a (relatively) easy read. Remember, you need to write for the intelligent layman.

Be specific.

When writing your abstract, clearly outline your most important findings and insights and don’t worry about “giving away” too much about your research – there’s no need to withhold information. This is the one way your abstract is not like a blurb on the back of a book – the reader should be able to clearly understand the key takeaways of your thesis or dissertation after reading the abstract. Of course, if they then want more detail, they need to step into the restaurant and try out the menu.

Psst… there’s more (for free)

This post is part of our dissertation mini-course, which covers everything you need to get started with your dissertation, thesis or research project. 

You Might Also Like:

17 Comments

This was so very useful, thank you Caroline.

Much appreciated.

This information on Abstract for writing a Dissertation was very helpful to me!

This was so useful. Thank you very much.

This was really useful in writing the abstract for my dissertation. Thank you Caroline.

Very clear and helpful information. Thanks so much!

Fabulous information – succinct, simple information which made my life easier after the most stressful and rewarding 21 months of completing this Masters Degree.

Very clear, specific and to the point guidance. Thanks a lot. Keep helping people 🙂

This was very helpful

Thanks for this nice and helping document.

Waw!!, this is a master piece to say the least.

Very helpful and enjoyable

Thank you for sharing the very important and usful information. Best Bahar

Very clear and more understandable way of writing. I am so interested in it. God bless you dearly!!!!

Really, I found the explanation given of great help. The way the information is presented is easy to follow and capture.

Wow! Thank you so much for opening my eyes. This was so helpful to me.

Thanks for this! Very concise and helpful for my ADHD brain.

I am so grateful for the tips. I am very optimistic in coming up with a winning abstract for my dessertation, thanks to you.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Prevent plagiarism, run a free check.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 15 April 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

What Is a Dissertation Abstract?

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

Purpose of a Dissertation or Thesis Abstract

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

What Makes a Good Abstract for a Dissertation?

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.

How Long Should a Dissertation Abstract Be?

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation Abstract Structure

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

Things to Consider Before Writing a Dissertation Abstract

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.

Write an Abstract for a Dissertation Last

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Carefully Read Requirements

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Choose the Right Type of Dissertation Abstracts

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

• Informative
• Descriptive

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

How to Write an Abstract for a Dissertation or Thesis?

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

1. Identify the Purpose of Your Study

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

2. Discuss Methodology

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

3. Describe the Key Results

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

4. Summarize an Abstract for a Dissertation

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

How to Format an Abstract in Dissertation

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

Keywords in a Dissertation Abstract

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

Thesis and Dissertation Abstract Examples

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Extra Tips on Writing a Dissertation Abstract

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

Bottom Line on How to Write a Dissertation or Thesis Abstract

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

How to Write an Abstract for Your Thesis or Dissertation What is an Abstract? The abstract is an important component of your thesis. Presented at the beginning of the thesis, it is likely the first substantive description of your work read by an external examiner. You should view it as an opportunity to set accurate expectations. The abstract is a summary of the whole thesis. It presents all the major elements of your work in a highly condensed form. An abstract often functions, together with the thesis title, as a stand-alone text. Abstracts appear, absent the full text of the thesis, in bibliographic indexes such as PsycInfo. They may also be presented in announcements of the thesis examination. Most readers who encounter your abstract in a bibliographic database or receive an email announcing your research presentation will never retrieve the full text or attend the presentation. An abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there is insufficient time and space for the full text. Size and Structure Currently, the maximum sizes for abstracts submitted to Canada's National Archive are 150 words (Masters thesis) and 350 words (Doctoral dissertation). To preserve visual coherence, you may wish to limit the abstract for your doctoral dissertation to one double-spaced page, about 280 words. The structure of the abstract should mirror the structure of the whole thesis, and should represent all its major elements. For example, if your thesis has five chapters (introduction, literature review, methodology, results, conclusion), there should be one or more sentences assigned to summarize each chapter. Clearly Specify Your Research Questions As in the thesis itself, your research questions are critical in ensuring that the abstract is coherent and logically structured. They form the skeleton to which other elements adhere. They should be presented near the beginning of the abstract. There is only room for one to three questions. If there are more than three major research questions in your thesis, you should consider restructuring them by reducing some to subsidiary status. Don't Forget the Results The most common error in abstracts is failure to present results. The primary function of your thesis (and by extension your abstract) is not to tell readers what you did, it is to tell them what you discovered. Other information, such as the account of your research methods, is needed mainly to back the claims you make about your results. Approximately the last half of the abstract should be dedicated to summarizing and interpreting your results. Updated 2008.09.11 © John C. Nesbit

What is a dissertation abstract and how do I write one for my PhD?

Feb 12, 2019

There are a lot of posts that talk about how to write an abstract. Most say that you should write your abstract to impress your examiner.

We say that you need to flip things upside down: sure, your examiner will read it and want to see that you’ve written it well, but you should actually have your next boss in mind when you write it.

When you apply for your first academic job, the abstract may be the only part of your thesis that your new boss will read. They may not have the time or energy to read the whole thesis, so the abstract plays a crucial role. You should write it as if you academic career depends on it.

In this guide we talk about how to write an outstanding abstract that will (hopefully) land you a job.

If you haven’t already, make sure you download our PhD Writing Template , which you can use in conjunction with this guide to supercharge your PhD.

What is an abstract?

  This is fairly straightforward stuff, but let us be clear so we are all on the same page.

An abstract is a short summary at the beginning of the PhD that sums up the research, summarises the separate sections of the thesis and outlines the contribution.

It is typically used by those wishing to get a broad understanding of a piece of research prior to reading the entire thesis.

When you apply for your first academic job, the hiring manager will take a look through applicants’ abstracts (as well as your CV and covering letter) to create a shortlist. If you are lucky enough to do well at an interview, your potential new boss will take another look through it before deciding whether to offer you the job.

Why don’t they read the whole thing? Apart from the fact that they’re way too busy to read 200+ pages, a well written abstract actually contains all they need to know. It is a way of letting them see what your research is about, what contribution it makes, what your understanding of the field is and how or whether you will fit into the department.

So, you need to write it well.

But, don’t underestimate how hard it is to write a PhD thesis abstract. You have to condense hundred of pages and years of work into a few hundred words (exactly how many will depend on your university, so double check with them before you start writing).

How do I write a good PhD abstract?

Some blog posts use keywords to summarise the content (this one does, scroll down to see them). The abstract is similar. It’s an extended set of keywords to summarise a complex piece of research.

Above all, your PhD abstract should answer the question: ‘so what’ ? In other words, what is the contribution of your thesis to the field?

If you’ve been using our PhD writing template you’ll know that, to do this, your abstract should address six questions:

• What is the reason for writing the thesis?
• What are the current approaches and gaps in the literature?
• What are your research question(s) and aims?
• Which methodology have you used?
• What are the main findings?
• What are the main conclusions and implications?

One thing that should be obvious is that you can’t write your abstract until the study itself has been written. It’ll typically be the last thing you write (alongside the acknowledgements).

But how can I write a great one?

  The tricky thing about writing a great PhD abstract is that you haven’t got much space to answer the six questions above. There are a few things to consider though that will help to elevate your writing and make your abstract as efficient as possible:

• Give a good first impression by writing in short clear sentences
• Don’t repeat the title in the abstract
• Don’t cite references
• Use keywords from the document
• Respect the word limit
• Don’t be vague – the abstract should be a self contained summary of the research, so don’t introduce ambiguous words or complex terms
• Focus on just four or five essential points, concepts, or findings. Don’t, for example, try to explain your entire theoretical framework
• Edit it carefully. Make sure every word is relevant (you haven’t got room for wasted words) and that each sentence has maximum impact
• Avoid lengthy background information
• Don’t mention anything that isn’t discussed in the thesis
• Avoid overstatements
• Don’t spin your findings, contribution or significance to make your research sound grander or more influential that it actually is

Examples of a good and bad abstract

We can see that the bad abstract fails to answer the six questions posed above. It reads more like a PhD proposal, rather than a summary of a piece of research.

Specifically:

• It doesn’t discuss the reason why the thesis was written
• It doesn’t outline the gaps in the literature
• It doesn’t outline the research questions or aims
• It doesn’t discuss the methods
• It doesn’t discuss the findings
• It doesn’t discuss the conclusions and implications of the research.

It is also too short, lacks adequate keywords and introduces unnecessary detail. The abbreviations and references only serve to confuse the reader and the claim that the thesis will ‘develop a new theory of climate change’ is both vague and over-ambitious. The reader will see through this.

The good abstract though does a much better job at answering the six questions and summarising the research.

• The reason why the thesis was written is stated: ‘We do so to better enable policy makers and academics to understand the nuances of multi-level climate governance’ and….’it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’
• The gap is clearly defined: ‘The theory has neglected to account for the role of local governments.’
• The research question are laid out: ‘We ask to what extent and in what ways local governments in the UK’…
• The methods are hinted at: ‘Using a case study…’
• The findings are summarised: ‘We show that local governments are both implementers and interpreters of policy. We also show that they make innovative contributions to and influence the direction of national policy.’
• The conclusions and implications are clear: ‘The significance of this study is that it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’

This abstract is of a much better length, and it fully summarises what the thesis is about. We can see that if someone (i.e. your hiring manager) were to read just this abstract, they’d understand what your thesis is about and the contribution that it makes.

Your PhD thesis. All on one page. 

Use our free PhD structure template to quickly visualise every element of your thesis. 

I can’t summarise my thesis, what do I do?

  We suggest you fill out our PhD Writing Template . We’ve designed it so that you can visualise your PhD on one page and easily see the main components. It’s really easy to use. It asks you a few questions related to each section of your thesis. As you answer them, you develop a synopsis. You can use that synopsis to inform your abstract. If you haven’t downloaded it, you can find it here.

  Like everything related to writing, it takes practice before you get great at writing abstracts. Follow our tips and you’ll have a head start over others.

Remember, you’re not writing your abstract for anyone other than your hiring manager. Make sure it showcases the best of your research and shows your skills as both a researcher and a writer.

If you’re struggling, send us your abstract by email and we’ll have give you free advice on how to improve it.

Hello, Doctor…

Sounds good, doesn’t it?  Be able to call yourself Doctor sooner with our five-star rated How to Write A PhD email-course. Learn everything your supervisor should have taught you about planning and completing a PhD.

Now half price. Join hundreds of other students and become a better thesis writer, or your money back. 

Share this:

Hello! I am a first year PhD student and I am interested in your Thesis writing course. However, I don’t have Paypal, thus I would like to know if there is an alternative way for you to get paid. I hope so, because I have been “following” you and I think the course can be really useful for me 🙂 Hope to hear from you soon. Best wishes, Belén Merelas

Thanks for the comment – I have sent you an email.

Hello! I am a Master’s student and I have applied for a PhD position. The professors have asked me to write a short abstract-like text, based on a brief sentence they will send me, related to the project study. How am I supposed to write a text like that when I don’t have the whole paper, the methods, results etc? Thank you in advance!

Hi Maria. I’m afraid that without knowing more about your topic or subject I am unable to give you advice on this. Sorry I can’t help in the way you may have hoped.

Thank u so much… your tips have really helped me to broaden my scope on the idea of how to write an abstract for my Ph.D. course. This is so thoughtful of you… The article is very informative and helpful…Thanks again!

I’m so pleased. Thanks for your lovely words. They’re music to my ears.

Very insightful Thanks

Glad you think so. Good luck with the writing.

Thank you so much Doc

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Search The PhD Knowledge Base

Most popular articles from the phd knowlege base.

The PhD Knowledge Base Categories

• Your PhD and Covid
• Mastering your theory and literature review chapters
• How to structure and write every chapter of the PhD
• How to stay motivated and productive
• Techniques to improve your writing and fluency
• Advice on maintaining good mental health
• Resources designed for non-native English speakers
• PhD Writing Template
• Explore our back-catalogue of motivational advice

Sample Dissertation Abstracts

Amy K. Anderson , 2014

“Image/Text and Text/Image: Reimagining Multimodal Relationships through Dissociation”

“W.J.T. Mitchell has famously noted that we are in the midst of a “pictorial turn,” and images are playing an increasingly important role in digital and multimodal communication. My dissertation addresses the question of how meaning is made when texts and images are united in multimodal arguments. Visual rhetoricians have often attempted to understand text-image arguments by privileging one medium over the other, either using text-based rhetorical principles or developing new image-based theories. I argue that the relationship between the two media is more dynamic, and can be better understood by applying The New Rhetoric ’s concept of dissociation, which Chaim Perelman and Lucie Olbrechts-Tyteca developed to demonstrate how the interaction of differently valued concepts can construct new meaning. My dissertation expands the range of dissociation by applying it specifically to visual contexts and using it to critique visual arguments in a series of historical moments when political, religious, and economic factors cause one form of media to be valued over the other: Byzantine Iconoclasm, the late medieval period, the 1950’s advertising boom, and the modern digital age. In each of these periods, I argue that dissociation reveals how the privileged medium can shape an entire multimodal argument. I conclude with a discussion of dissociative multimodal pedagogy, applying dissociation to the multimodal composition classroom.”

Holly F. Osborn , 2014

“Apparitional Economies: Spectral Imagery in the Antebellum Imagination”

“ Apparitional Economies is invested in both a historical consideration of economic conditions through the antebellum era and an examination of how spectral representations depict the effects of such conditions on local publics and individual persons. From this perspective, the project demonstrates how extensively the period’s literature is entangled in the economic: in financial devastation, in the boundaries of seemingly limitless progress, and in the standards of value that order the worth of commodities and the persons who can trade for them.  I argue that the space of the specter is a force of representation, an invisible site in which the uncertainties of antebellum economic and social change become visible. I read this spectral space in canonical works by Nathaniel Hawthorne, Edgar Allan Poe, Herman Melville, and Walt Whitman and in emerging texts by Robert Montgomery Bird, Theophilus Fisk, Fitz James O’Brien, and Edward Williams Clay.  Methodologically, Apparitional Economies moves through historical events and textual representation in two ways: chronologically with an attention to archival materials through the antebellum era (beginning with the specters that emerge with the Panic of 1837) and interpretively across the readings of a literary specter (as a space of lack and potential, as exchange, as transformation, and as the presence of absence). As a failed body and, therefore, a flawed embodiment of economic existence, the literary specter proves a powerful representation of antebellum social and financial uncertainties.”

Michael Todd Hendricks , 2014

“Knowing and Being Known: Sexual Delinquency, Stardom, and Adolescent Girlhood in Midcentury American Film”

“Sexual delinquency marked midcentury cinematic representations of adolescent girls in 1940s, 50, and early 60s. Drawing from the history of adolescence and the context of midcentury female juvenile delinquency, I argue that studios and teen girl stars struggled for decades with publicity, censorship, and social expectations regarding the sexual license of teenage girls. Until the late 1950s, exploitation films and B movies exploited teen sex and pregnancy while mainstream Hollywood ignored those issues, struggling to promote teen girl stars by tightly controlling their private lives but depriving fan magazines of the gossip and scandals that normally fueled the machinery of stardom. The emergence and image of the postwar, sexually autonomous teen girl finally began to see expression in mainstream melodramas of the late 50s, and teen girl stars such as Sandra Dee and Natalie Wood created new, “post-delinquent” star images wherein “good girls” could still be sexually experienced. This new image was a significant departure from the widespread belief that the sexually active teen girl was a fundamentally delinquent threat to the nuclear family, and offered a liberal counterpoint to more conservative teen girl prototypes like Hayley Mills, which continued to have cultural currency.”

Emily A. Dotson , 2014

“Strong Angels of Comfort: Middle Class Managing Daughters in Victorian Literature”

“This dissertation joins a vibrant conversation in the social sciences about the challenging nature of care labor as well as feminist discussions about the role of the daughter in Victorian culture.  It explores the literary presence of the middle class managing daughter in the Victorian home.  Collectively, the novels in this study articulate social anxieties about the unclear and unstable role of daughters in the family, the physically and emotionally challenging work they, and all women, do, and the struggle for daughters to find a place in a family hierarchy, which is often structured not by effort or affection, but by proscribed traditional roles, which do not easily adapt to managing daughters, even if they are the ones holding the family together.  The managing daughter is a problem not accounted for in any conventional domestic structure or ideology so there is no role, no clear set of responsibilities and no boundaries that could, and arguably should, define her obligations, offer her opportunities for empowerment, or set necessary limits on the broad cultural mandate she has to comfort and care others.  The extremes she is often pushed to reveals the stresses and hidden conflicts for authority and autonomy inherent in domestic labor without the iconic angel in the house rhetoric that so often masks the difficulties of domestic life for women. She gains no authority or stability no matter how loving or even how necessary she is to a family because there simply is no position in the parental family structure for her.  The managing daughter thus reveals a deep crack in the structure of the traditional Victorian family by showing that it often cannot accommodate, protect, or validate a loving non-traditional family member because it values traditional hierarchies over emotion or effort.  Yet, in doing so, it also suggests that if it is position not passion that matters, then as long as a woman assumes the right position in the family then deep emotional connections to others are not necessary for her to care competently for others.”

Virginia B. Engholm , 2014

“The Power of Multiplying: Reproductive Control in American Culture, 1850-1930”

“Prior to the advent of modern birth control beginning in the nineteenth century, the biological reproductive cycle of pregnancy, post-partum recovery, and nursing dominated women’s adult years. The average birth rate per woman in 1800 was just over seven, but by 1900, that rate had fallen to just under than three and a half. The question that this dissertation explores is what cultural narratives about reproduction and reproductive control emerge in the wake of this demographic shift. What’s at stake in a woman’s decision to reproduce, for herself, her family, her nation? How do women, and society, control birth?  In order to explore these questions, this dissertation broadens the very term “birth control” from the technological and medical mechanisms by which women limit or prevent conception and birth to a conception of “controlling birth,” the societal and cultural processes that affect reproductive practices. This dissertation, then, constructs a cultural narrative of the process of controlling birth. Moving away from a focus on “negative birth control”—contraception, abortion, sterilization—the term “controlling birth” also applies to engineering or encouraging wanted or desired reproduction. While the chapters of this work often focus on traditional sites of birth control—contraceptives, abortion, and eugenics—they are not limited to those forms, uncovering previously hidden narratives of reproduction control. This new lens also reveals men’s investment in these reproductive practices.  By focusing on a variety of cultural texts—advertisements, fictional novels, historical writings, medical texts, popular print, and film—this project aims to create a sense of how these cultural productions work together to construct narratives about sexuality, reproduction, and reproductive control. Relying heavily on a historicizing of these issues, my project shows how these texts—both fictional and nonfictional—create a rich and valid site from which to explore the development of narratives of sexuality and reproductive practices, as well as how these narratives connect to larger cultural narratives of race, class, and nation. The interdisciplinary nature of this inquiry highlights the interrelationship between the literary productions of the nineteenth and twentieth century and American cultural history.

Amber M. Stamper , 2013

“Witnessing the Web: The Rhetoric of American E-Vangelism and Persuasion Online”

“From the distribution of religious tracts at Ellis Island and Billy Sunday’s radio messages to televised recordings of the Billy Graham Crusade and Pat Robertson’s 700 Club, American evangelicals have long made a practice of utilizing mass media to spread the Gospel. Most recently, these Christian evangelists have gone online. As a contribution to scholarship in religious rhetoric and media studies, this dissertation offers evangelistic websites as a case study into the ways persuasion is carried out on the Internet. Through an analysis of digital texts—including several evangelical home pages, a chat room, discussion forums, and a virtual church—I investigate how conversion is encouraged via web design and virtual community as well as how the Internet medium impacts the theology and rhetorical strategies of web evangelists. I argue for “persuasive architecture” and “persuasive communities”—web design on the fundamental level of interface layout and tightly-controlled restrictions on discourse and community membership—as key components of this strategy. In addition, I argue that evangelical ideology has been influenced by the web medium and that a “digital reformation” is taking place in the church, one centered on a move away from the Prosperity Gospel of televangelism to a Gospel focused on God as divine problem-solver and salvation as an uncomplicated, individualized, and instantaneously-rewarding experience, mimicking Web 2.0 users’ desire for quick, timely, and effective answers to all queries. This study simultaneously illuminates the structural and fundamental levels of design through which the web persuades as well as how—as rhetoricians from Plato’s King Thamus to Marshall McLuhan have recognized—media inevitably shapes the message and culture of its users.”

Devjani Roy , 2013

“Randomness, Uncertainty, and Economic Behavior: The Life of Money in Eighteenth-Century Fiction”

“My dissertation argues that fiction produced in England during the frequent financial crises and political volatility experienced between 1770 and 1820 both reflected and shaped the cultural anxiety occasioned by a seemingly random and increasingly uncertain world. The project begins within the historical framework of the multiple financial crises that occurred in the late eighteenth century: seven crises took place between 1760 and 1797 alone, appearing seemingly out of nowhere and creating a climate of financial meltdown. But how did the awareness of economic turbulence filter into the creative consciousness? Through an interdisciplinary focus on cultural studies and behavioral economics, the dissertation posits that in spite of their conventional, status quo affirming endings (opportunists are punished, lovers are married), novels and plays written between 1770 and 1820 contemplated models of behavior that were newly opportunistic, echoing the reluctant realization that irrationality had become the norm rather than a rare aberration. By analyzing concrete narrative strategies used by writers such as Frances Burney, Georgiana Cavendish, Hannah Cowley, and Thomas Holcroft, I demonstrate that late eighteenth-century fiction both articulates and elides the awareness of randomness and uncertainty in its depiction of plot, character, and narrative.”

George Micajah Phillips , 2011

“Seeing Subjects: Recognition, Identity, and Visual Cultures in Literary Modernism”

“ Seeing Subjects plots a literary history of modern Britain that begins with Dorian Gray obsessively inspecting his portrait’s changes and ends in Virginia Woolf’s visit to the cinema where she found audiences to be “savages watching the pictures.” Focusing on how literature in the late-19 th and 20 th centuries regarded images as possessing a shaping force over how identities are understood and performed, I argue that modernists in Britain felt mediated images were altering, rather than merely representing, British identity. As Britain’s economy expanded to unprecedented imperial reach and global influence, new visual technologies also made it possible to render images culled from across the British world—from its furthest colonies to darkest London—to the small island nation, deeply and irrevocably complicating British identity. In response, Oscar Wilde, Joseph Conrad, T. S. Eliot, and others sought to better understand how identity was recognized, particularly visually. By exploring how painting, photography, colonial exhibitions, and cinema sought to manage visual representations of identity, these modernists found that recognition began by acknowledging the familiar but also went further to acknowledge what was strange and new as well. Reading recognition and misrecognition as crucial features of modernist texts, Seeing Subjects argues for a new understanding of how modernism’s formal experimentation came to be and for how it calls for responses from readers today.”

Aparajita Sengupta , 2011

“Nation, Fantasy, and Mimicry: Elements of Political Resistance in Postcolonial Indian Cinema”

“In spite of the substantial amount of critical work that has been produced on Indian cinema in the last decade, misconceptions about Indian cinema still abound. Indian cinema is a subject about which conceptions are still muddy, even within prominent academic circles. The majority of the recent critical work on the subject endeavors to correct misconceptions, analyze cinematic norms and lay down the theoretical foundations for Indian cinema. This dissertation conducts a study of the cinema from India with a view to examine the extent to which such cinema represents an anti-colonial vision. The political resistance of Indian films to colonial and neo-colonial norms, and their capacity to formulate a national identity is the primary focus of the current study.”

Kenneth Carr Hawley , 2007

“The Boethian Vision of Eternity in Old, Middle, and Early Modern English Translations of De Consolatione Philosophi”

“While this analysis of the Old, Middle, and Early Modern English translations of De Consolatione Philosophiandamp;aelig; provides a brief reception history and an overview of the critical tradition surrounding each version, its focus is upon how these renderings present particular moments that offer the consolation of eternity, especially since such passages typify the work as a whole. For Boethius, confused and conflicting views on fame, fortune, happiness, good and evil, fate, free will, necessity, foreknowledge, and providence are only capable of clarity and resolution to the degree that one attains to knowledge of the divine mind and especially to knowledge like that of the divine mind, which alone possesses a perfectly eternal perspective. Thus, as it draws upon such fundamentally Boethian passages on the eternal Prime Mover, this study demonstrates how the translators have negotiated linguistic, literary, cultural, religious, and political expectations and forces as they have presented their own particular versions of the Boethian vision of eternity. Even though the text has been understood, accepted, and appropriated in such divergent ways over the centuries, the Boethian vision of eternity has held his Consolations arguments together and undergirded all of its most pivotal positions, without disturbing or compromising the philosophical, secular, academic, or religious approaches to the work, as readers from across the ideological, theological, doctrinal, and political spectra have appreciated and endorsed the nature and the implications of divine eternity. It is the consolation of eternity that has been cast so consistently and so faithfully into Old, Middle, and Early Modern English, regardless of form and irrespective of situation or background. For whether in prose and verse, all-prose, or all-verse, and whether by a Catholic, a Protestant, a king, a queen, an author, or a scholar, each translation has presented the texts central narrative: as Boethius the character is educated by the figure of Lady Philosophy, his eyes are turned away from the earth and into the heavens, moving him and his mind from confusion to clarity, from forgetfulness to remembrance, from reason to intelligence, and thus from time to eternity.”

Douglas Larue Reside , 2006

“The Electronic Edition and Textual Criticism of American Musical Theatre”

“For many, contemporary theatre is represented by the musical. The form remains, however, virtually unstudied by literary scholars. In part, this may be a result of the difficulty of accessing the texts. Reading a musical from a traditional codex is no easy matter. The integration of text and music in a musical make it inappropriate to separate the two. One can try to follow along with a cast recording. In most cases, though, this is awkward. Many cast albums record a significantly modified version of the score and lyrics and few include the entire work. Further, musical theatre texts often exist in many different versions. This work begins with a summary of the problems one encounters when editing a multi-authored text (musicals often have a lyricist, librettist, and composer) which may be revised for practical (rather than aesthetic) reasons. The merits of restoring the material changed during the production process are debated. In this discussion some attempt is made to identify who should be considered the dominating collaborator (or auteur) of a musical. Ultimately, this dissertation argues that the notion of trying to restore an "authorial Ur-Text" makes little sense given the multitude of collaborators involved in the process of making musicals. Instead, an electronic variorum edition is presented as an alternative means of studying and teaching musical theatre texts. The study concludes with a narrative of the authors own work on an electronic edition of the 1998 Broadway musical Parade and ends with a critical introduction to this text.”

Purdue Online Writing Lab Purdue OWL® College of Liberal Arts

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

Scholars often write abstracts for various applications: conference presentations may require an abstract or other short summary for a program; journal articles almost always require abstracts; invited talks and lectures are often advertised using an abstract. While the application may necessarily change the length of the abstract (a conference program may only allow for 50-75 words, for instance), the purpose and structure remains fairly constant.

Abstracts are generally kept brief (approximately 150-200 words). They differ by field, but in general, they need to summarize the article so that readers can decide if it is relevant to their work. The typical abstract includes these elements:

• A statement of the problem and objectives
• A statement of the significance of the work
• A summary of employed methods or your research approach
• A summary of findings or conclusions of the study
• A description of the implications of the findings

Regardless of field, abstract authors should explain the purpose of the work, methods used, the results and the conclusions that can be drawn. However, each field purports slightly different ways to structure the abstract. A reliable strategy is to write the abstract as a condensed version of your article, with 1-2 sentences summarizing each major section. This means that in many of the sciences and a large portion of the humanities, abstracts follow a version of the IMRAD structure: Introduction, Methods, Results, and Discussion.

Most scientific journals require authors to submit such abstracts. It is generally advisable to write the abstract in the English language. That is because most papers in other languages, especially Asian nations, tend to publish an English abstract with common search engines, such as, the MLA site.

Example Abstract

This example abstract follows the IMRAD structure closely. The first two sentences are the introduction and background information. Sentences 3-5 describe the methods used in the study. Sentence 6 summarizes the results, while the last two sentences summarize the discussion and conclusion of the study; they also indicate the significance of the results.

Usability and User-Centered Theory for 21 st Century OWLs — by Dana Lynn Driscoll, H. Allen Brizee, Michael Salvo, and Morgan Sousa from The Handbook of Research on Virtual Workplaces and the New Nature of Business Practices . Eds. Kirk St. Amant and Pavel Zemlansky. Hershey, PA: Idea Group Publishing, 2008.

This article describes results of usability research conducted on the Purdue Online Writing Lab (OWL). The Purdue OWL is an information-rich educational website that provides free writing resources to users worldwide. Researchers conducted two generations of usability tests. In the first test, participants were asked to navigate the OWL and answer questions. Results of the first test and user-centered scholarship indicated that a more user-centered focus would improve usability. The second test asked participants to answer writing-related questions using both the OWL website and a user-centered OWL prototype. Participants took significantly less time to find information using the prototype and reported a more positive response to the user-centered prototype than the original OWL. Researchers conclude that a user-centered website is more effective and can be a model for information-rich online resources. Researchers also conclude that usability research can be a productive source of ideas, underscoring the need for participatory invention.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation

Prize-Winning Thesis and Dissertation Examples

Published on September 9, 2022 by Tegan George . Revised on July 18, 2023.

It can be difficult to know where to start when writing your thesis or dissertation . One way to come up with some ideas or maybe even combat writer’s block is to check out previous work done by other students on a similar thesis or dissertation topic to yours.

This article collects a list of undergraduate, master’s, and PhD theses and dissertations that have won prizes for their high-quality research.

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Award-winning undergraduate theses, award-winning master’s theses, award-winning ph.d. dissertations, other interesting articles.

University : University of Pennsylvania Faculty : History Author : Suchait Kahlon Award : 2021 Hilary Conroy Prize for Best Honors Thesis in World History Title : “Abolition, Africans, and Abstraction: the Influence of the “Noble Savage” on British and French Antislavery Thought, 1787-1807”

University : Columbia University Faculty : History Author : Julien Saint Reiman Award : 2018 Charles A. Beard Senior Thesis Prize Title : “A Starving Man Helping Another Starving Man”: UNRRA, India, and the Genesis of Global Relief, 1943-1947

University: University College London Faculty: Geography Author: Anna Knowles-Smith Award:  2017 Royal Geographical Society Undergraduate Dissertation Prize Title:  Refugees and theatre: an exploration of the basis of self-representation

University: University of Washington Faculty:  Computer Science & Engineering Author: Nick J. Martindell Award: 2014 Best Senior Thesis Award Title:  DCDN: Distributed content delivery for the modern web

The only proofreading tool specialized in correcting academic writing - try for free!

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Try for free

University:  University of Edinburgh Faculty:  Informatics Author:  Christopher Sipola Award:  2018 Social Responsibility & Sustainability Dissertation Prize Title:  Summarizing electricity usage with a neural network

University:  University of Ottawa Faculty:  Education Author:  Matthew Brillinger Award:  2017 Commission on Graduate Studies in the Humanities Prize Title:  Educational Park Planning in Berkeley, California, 1965-1968

University:  University of Ottawa Faculty: Social Sciences Author:  Heather Martin Award:  2015 Joseph De Koninck Prize Title:  An Analysis of Sexual Assault Support Services for Women who have a Developmental Disability

University : University of Ottawa Faculty : Physics Author : Guillaume Thekkadath Award : 2017 Commission on Graduate Studies in the Sciences Prize Title : Joint measurements of complementary properties of quantum systems

University:  London School of Economics Faculty: International Development Author: Lajos Kossuth Award:  2016 Winner of the Prize for Best Overall Performance Title:  Shiny Happy People: A study of the effects income relative to a reference group exerts on life satisfaction

University : Stanford University Faculty : English Author : Nathan Wainstein Award : 2021 Alden Prize Title : “Unformed Art: Bad Writing in the Modernist Novel”

University : University of Massachusetts at Amherst Faculty : Molecular and Cellular Biology Author : Nils Pilotte Award : 2021 Byron Prize for Best Ph.D. Dissertation Title : “Improved Molecular Diagnostics for Soil-Transmitted Molecular Diagnostics for Soil-Transmitted Helminths”

University:  Utrecht University Faculty:  Linguistics Author:  Hans Rutger Bosker Award: 2014 AVT/Anéla Dissertation Prize Title:  The processing and evaluation of fluency in native and non-native speech

University: California Institute of Technology Faculty: Physics Author: Michael P. Mendenhall Award: 2015 Dissertation Award in Nuclear Physics Title: Measurement of the neutron beta decay asymmetry using ultracold neutrons

University:  Stanford University Faculty: Management Science and Engineering Author:  Shayan O. Gharan Award:  Doctoral Dissertation Award 2013 Title:   New Rounding Techniques for the Design and Analysis of Approximation Algorithms

University: University of Minnesota Faculty: Chemical Engineering Author: Eric A. Vandre Award:  2014 Andreas Acrivos Dissertation Award in Fluid Dynamics Title: Onset of Dynamics Wetting Failure: The Mechanics of High-speed Fluid Displacement

University: Erasmus University Rotterdam Faculty: Marketing Author: Ezgi Akpinar Award: McKinsey Marketing Dissertation Award 2014 Title: Consumer Information Sharing: Understanding Psychological Drivers of Social Transmission

University: University of Washington Faculty: Computer Science & Engineering Author: Keith N. Snavely Award:  2009 Doctoral Dissertation Award Title: Scene Reconstruction and Visualization from Internet Photo Collections

University:  University of Ottawa Faculty:  Social Work Author:  Susannah Taylor Award: 2018 Joseph De Koninck Prize Title:  Effacing and Obscuring Autonomy: the Effects of Structural Violence on the Transition to Adulthood of Street Involved Youth

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Survivorship bias
• Self-serving bias
• Availability heuristic
• Halo effect
• Hindsight bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

George, T. (2023, July 18). Prize-Winning Thesis and Dissertation Examples. Scribbr. Retrieved April 15, 2024, from https://www.scribbr.com/dissertation/examples/

Is this article helpful?

Tegan George

Other students also liked, how to choose a dissertation topic | 8 steps to follow, checklist: writing a dissertation, thesis & dissertation database examples, what is your plagiarism score.

• Jump to menu
• Student Home
• Accept your offer
• How to enrol
• Student ID card
• Set up your IT
• Orientation Week
• Fees & payment
• Academic calendar
• Special consideration
• Transcripts
• The Nucleus: Student Hub
• Referencing
• Essay writing
• Learning abroad & exchange
• Professional development & UNSW Advantage
• Employability
• Financial assistance
• International students
• Equitable learning
• Postgraduate research
• Health Service
• Events & activities
• Emergencies
• Volunteering
• Clubs and societies
• Accommodation
• Health services
• Sport and gym
• Arc student organisation
• Security on campus
• Maps of campus
• Careers portal
• Change password

Sample Abstracts for Writing

These pages show two examples of typical abstracts from honours theses. Notice that the stages of the abstracts have been labelled, so that you can see the function of each sentence or part-sentence. You can also see that there are differences in the type of information that is included in each abstract, as well as differences in level of detail.

Sample 1: Genetic Mechanisms and Dissemination of Antibiotic Resistance

Abstract (Background statement)  The spread of antibiotic resistance is aided by mobile elements such as transposons and conjugative plasmids. ( Narrowing statement)  Recently, integrons have been recognised as genetic elements that have the capacity to contribute to the spread of resistance. ( Elaboration of narrowing) (statement)  Integrons constitute an efficient means of capturing gene cassettes and allow expression of encoded resistance. (Aims)  The aims of this study were to screen clinical isolates for integrons, characterise gene cassettes and extended spectrum b-lactamase (ESBL) genes.   (Extended aim)  Subsequent to this, genetic linkage between ESBL genes and gentamicin resistance was investigated.  (Results)  In this study, 41 % of multiple antibiotic resistant bacteria and 79 % of extended-spectrum b-lactamase producing organisms were found to carry either one or two integrons, as detected by PCR.   (Results)   A novel gene cassette contained within an integron was identified from Stenotrophomonas maltophilia, encoding a protein that belongs to the small multidrug resistance (SMR) family of transporters.  (Results)   pLJ1, a transferable plasmid that was present in 86 % of the extended-spectrum b-lactamase producing collection, was found to harbour an integron carrying aadB, a gene cassette for gentamicin, kanamycin and tobramycin resistance and a blaSHV-12 gene for third generation cephalosporin resistance.  (Justification of results)  The presence of this plasmid accounts for the gentamicin resistance phenotype that is often associated with organisms displaying an extended-spectrum b-lactamase phenotype. (Jones 2004, p.9)

Sample 2: Permeable Treatment Walls 

Abstract (Background statement)   A review of groundwater remediation in use today shows that new techniques are required that solve the problems of pump and treat, containment and in-situ treatment.   (Narrowing statement)  One such technique is the method that involves the use of permeable treatment walls.   (Elaboration)  These methods use a reactive medium such as iron to remediate contaminated groundwater.   (Aim*)  Several methods of implementing this remediation strategy have been described.   (Elaboration of aim)  These methods include injection and trenching.   (Specific focus of aim)  The use of a funnel and gate system via a trench has been examined in detail  (Methods)  using a groundwater modelling option of the FLAC program.   (Methods)  The modelling involved an analysis of the effect of changing the lengths of the walls and gate, varying the permeability, and varying the number of gates.   (Results)  The results showed that increasing the wall length, gate length and permeability increases the size of the plume captured.   (Key result)  An important factor in designing the walls is the residence time of the water in the gate or the contact time of the contaminant with the reactive media.   (Evaluation of results)  A sensitivity analysis has been conducted that shows that increasing the size of the capture zone decreases the residence time  (Limitations)  which will limit the design.   (Future applications and research)  The results of the modelling and sensitivity analysis are presented such that they can be used as an aid to the design of permeable treatment walls. (Dasey G. 1996 p.i) 

 *   This is the aim of the research, but it is not very clearly stated.  It might be better if the aim was made more explicit.

Sample 3: The Effects of Flouride on the Reproduction of Three Native Australian Plant Species

Note: This abstract is referred to as an Executive Summary (original 2 pages)

(Background statement)  No other form of environmental pollution has had as widespread detrimental effect on the growth and reproductive capacity of plants as air pollution.  (Narrowing statement)  Fluorides have long been recognized as highly toxic and research has shown that they are the most phytotoxic of all air pollutants.  (Elaboration of narrowing statement)  One of the most subtle impacts of fluoride on plant development is on their reproductive processes… There has been very little work directed towards forest trees, and especially native Australian species. (Broad purpose of study)  An understanding of the effects of fluoride on the reproductive processes of plant species within a forest community may help predict changes within the community following an increase in atmospheric fluoride arising from industrial sources. (Narrowing of purpose of study)  This study investigates the effects of increased atmospheric fluoride emissions from an aluminium smelter, on the reproductive processes of three native species, Banksia aemula, Bossiaea heterophylla and Actinotus helianthi. Elaboration of purpose Attention has also been paid to the soil seed reserve as an important resource for the replacement of adult plants within the community. (Results)  For Banksia aemula the study found that the reproduction of this fluoride-sensitive species may be affected in the close vicinity of the smelter… For the two ground layer species the study found that the fluoride may be affecting the Bossiaea heterophylla but having no discernible or very little effect on the Actinotus helianthi.** (Significance of results 1)  The implications of these results for the forest community are that sensitive native species such as the long-lived Banksia aemula and Bossiaea heterophylla will be removed from the plant community close to the smelter. This will reduce the resources they provide to the existing ecosystem but will, however, free more resources for the more resistant opportunist species such as Actinotus helianthi as well as the many introduced species.  (Significance of results 2)  The soil seed reserve study indicated that the seed reserve was very small in all areas. This would have several negative impacts on the natural regeneration of the area in the event of the closure of the smelter… (Future research)  Further research is recommended to assess the biochemical pathways for both the vegetative and reproductive processes and the mechanisms of the pollination of this important species… This may need to be repeated at certain intervals to monitor any further changes that may result from the higher fluoride emissions of the new expansion.

Exercise for sample 3

The abstract (executive summary) above has been summarised to focus on key stages. Some of the omitted text is reproduced below. Can you identify the stages?

• The effects of the fluoride for the forest species were assessed by measuring several reproductive and associated characteristics of the plants found within forest areas along a fluoride gradient. 

See answer:

This is the only sentence which outlines the Method of the study. It is the next sentence after the Elaboration of purpose.

• Bossiaea heterophylla shows more visible signs of fluoride stress close to the smelter. Insect damage to the Bossiaea heterophylla seed pods were observed in the background sites but not in the high fluoride sites indicating that the fluoride may be having an effect on the seed predators close to the smelter. 

This short text is part of the Results and follows on from the results section above.

• This study looked at the difference in visible structures associated with reproduction. Leaves of the Banksia aemula trees growing close to the smelter have accumulated large concentrations of foliar fluoride. Whether this is affecting the physiology and biochemical processes of the plan(which in turn may indirectly affect the reproduction potential of the plants) or the increased fluoride in the atmosphere is directly affecting the reproduction mechanisms is difficult to ascertain from this study.

This text is the first part of the concluding paragraph. The remainder of the paragraph discusses further research.

Engineering & science

• Report writing
• Technical writing
• Writing lab reports
• Sample Abstracts
• Introductions
• Literature review
• Writing up results
• Discussions
• Conclusions
• Writing tools
• Case study report in (engineering)
• ^ More support

Scholarly Resources 4 Students | scite.ai 21 May 2024

Discover your Library: Main Library 21 May 2024

I Help to Study

Useful information for students

Home » Thesis » Writing abstract for masters thesis

• Academic Writing
• Assignments
• Business Plans
• Buy Services
• Custom Writing
• Dissertations
• For Professionals
• Help & Assistance
• Useful Services
• Various Papers

Writing abstract for masters thesis

Can you make it compelling enough to attract your reader’s mind?

Writing A Thesis Abstract

Tips Revealed To Get You Write An Attention-Grabbing Thesis Abstract

A thesis abstract is a brief and compact form a thesis giving the important details and introduction to the thesis. A thesis abstract highlights the main points discussed in the thesis. In short, we can say a thesis abstract is a mini-thesis.

How To Write Thesis Abstract?

Writing thesis abstract is a core part of your thesis. So you can’t afford to write it carelessly at all. You should follow the under-mentioned up to the mark guidelines to write a perfect thesis abstract.

7 Vital Writing

Abstract Of Thesis

You need to apply the following tips when you go for writing abstract for thesis.

• First of all, go through your thesis and highlight the objectives, scope, methods, conclusions, and any other important information.
• Write the objectives methods, conclusions, recommendations, prominently discussed in your thesis’s paper.
• Now highlight the outcomes of your thesis.
• Collect all the highlighted sections into one paragraph.
• Rewrite all the information in another way to make it look different.
• Start the first sentence with the phrase this paper or this study.
• Revise your thesis paper to check any errors such as grammar, any left out information, verbosity, and irrelevant information.

Check out your thesis abstract to be sure that you have employed these precautions:

• Thesis is supposed to be written after the completion of thesis. Writing it at early stage might make you miss important details to include.
• Restrict the thesis abstract to two paragraphs.
• Write it in a concise manner that your reader should get a clear idea what should he expect in thesis. Information in your thesis abstract and thesis must match.
• Remove any extra or unnecessary details.
• Write full forms of abbreviations and acronyms when you use it first time.
• Put it in a very simple language since it is to give a quick and clear glimpse of thesis.
• Write the thesis abstract in past tense if you are writing it after completing thesis which is a better way.
• Write in present or future tense if you write it in the beginning.

Sample Thesis Abstract

Large fires grew between 1960 – 2003 both in size and number, and increasingly formed a larger percentage of all wildfires over the time period studied. At the broadest spatial scale, the size of large fires was positively associated with average yearly utmost temperature during the year of the fire happening. Fire occurrence and average yearly precipitation one year preceding to the large fire event were also show a relationship. There was also some connection with topographical side. From 1960 to 2003 the area was subject to an increase in maximum temperature and a decrease in precipitation. Increases in large fire occurrence and size are attributed to increase in air temperature and exotic grasses. My results and the projected tendency toward warmer, drier growing seasons and summers suggest that sagebrush steppe systems may carry on to practice an increase in large fires in the future.”

Free eBook on “How to write a thesis statement in less than 30 minutes”

Click here to download your FREE E-Book on “How To Write Thesis Statement” and write your thesis statement in less than 30 minutes, Guaranteed.

Order Your Custom Thesis Writing Now!

• Any essay type or topic
• Professional writers
• On time delivery
• Money Back guarantee
• Written on your specific topic
• Phone, E-mail Live Chat Support
• Contact your writer anytime
• Guaranteed “A” grade
• Free topic development
• Free unlimited revisions
• Free Plagiarism scan report
• Free Bibliography page
• Free Title page
• Free Table of content

LIMITED TIME DISCOUNT OFFER

“The incidence of great fires in the western United States raises questions pertaining to climate change effect of on fire regimes in the past and future. Sagebrush steppe has long been exposed to agriculture, unnecessary cropping and enveloping species. This dying out ecological unit is facing a latest risk of spreading big wildfires and weather change. The purposes of this study were to rebuild the fire history for sagebrush steppe ecosystems across three spatial scales of sagebrush-dominated steppe: a. Idaho National Laboratory, b. Snake River Plain, and c. portions of the Northern Basin and Range to take in the Snake River Plain. This study used geographic information systems (GIS) to associate size and occurrence of fires over 5,000 ha with landscape plant life and climatic variables across manifold spatial and sequential scales. The impact of climate changeability and intense climatic events on fire occurrence and size can differ depending on the spatial and temporal scales over which information is collected and examined. Large fires grew between 1960 – 2003 both in size and number, and increasingly formed a larger percentage of all wildfires over the time period studied. At the broadest spatial scale, the size of large fires was positively associated with average yearly utmost temperature during the year of the fire happening. Fire occurrence and average yearly precipitation one year preceding to the large fire event were also show a relationship. There was also some connection with topographical side. From 1960 to 2003 the area was subject to an increase in maximum temperature and a decrease in precipitation. Increases in large fire occurrence and size are attributed to increase in air temperature and exotic grasses. My results and the projected tendency toward warmer, drier growing seasons and summers suggest that sagebrush steppe systems may carry on to practice an increase in large fires in the future.”

Related Articles:

Latest Posts

• Privacy Policy

© 2016 | IHelptoStudy.Com

Please Wait!

Smart. Open. Grounded. Inventive. Read our Ideas Made to Matter.

Which program is right for you?

Through intellectual rigor and experiential learning, this full-time, two-year MBA program develops leaders who make a difference in the world.

A rigorous, hands-on program that prepares adaptive problem solvers for premier finance careers.

A 12-month program focused on applying the tools of modern data science, optimization and machine learning to solve real-world business problems.

Earn your MBA and SM in engineering with this transformative two-year program.

Combine an international MBA with a deep dive into management science. A special opportunity for partner and affiliate schools only.

A doctoral program that produces outstanding scholars who are leading in their fields of research.

Bring a business perspective to your technical and quantitative expertise with a bachelor’s degree in management, business analytics, or finance.

A joint program for mid-career professionals that integrates engineering and systems thinking. Earn your master’s degree in engineering and management.

An interdisciplinary program that combines engineering, management, and design, leading to a master’s degree in engineering and management.

Executive Programs

A full-time MBA program for mid-career leaders eager to dedicate one year of discovery for a lifetime of impact.

This 20-month MBA program equips experienced executives to enhance their impact on their organizations and the world.

Non-degree programs for senior executives and high-potential managers.

A non-degree, customizable program for mid-career professionals.

Sample Dissertation Abstracts

One of the best ways to determine your fit in a PhD program is familiarizing yourself with the research done by faculty and students in the institute. Students in the Sloan PhD Program study a wide variety of topics and the abstracts below will give you examples of the topics they have chosen to study.

Dissertation Abstracts by Research Group

Selected Dissertation Abstracts by recent PhD Program graduates

BEHAVIORAL & POLICY SCIENCES

• Economic Sociology 
• Institute for Work & Employment Research
• Organization Studies
• Technological Innovation, Entrepreneurship, & Strategic Management

ECONOMICS  FINANCE & ACCOUNTING

MANAGEMENT SCIENCE

• Information Technology
• System Dynamics

The Plagiarism Checker Online For Your Academic Work

Start Plagiarism Check

Editing & Proofreading for Your Research Paper

Get it proofread now

Online Printing & Binding with Free Express Delivery

Configure binding now

• Academic essay overview
• The writing process
• Structuring academic essays
• Types of academic essays
• Academic writing overview
• Sentence structure
• Academic writing process
• Improving your academic writing
• Titles and headings
• APA style overview
• APA citation & referencing
• APA structure & sections
• Citation & referencing
• Structure and sections
• APA examples overview
• Commonly used citations
• Other examples
• British English vs. American English
• Chicago style overview
• Chicago citation & referencing
• Chicago structure & sections
• Chicago style examples
• Citing sources overview
• Citation format
• Citation examples
• College essay overview
• Application
• How to write a college essay
• Types of college essays
• Commonly confused words
• Definitions
• Dissertation overview
• Dissertation structure & sections
• Dissertation writing process
• Graduate school overview
• Application & admission
• Study abroad
• Master degree
• Harvard referencing overview
• Language rules overview
• Grammatical rules & structures
• Parts of speech
• Punctuation
• Methodology overview
• Analyzing data
• Experiments
• Observations
• Inductive vs. Deductive
• Qualitative vs. Quantitative
• Types of validity
• Types of reliability
• Sampling methods
• Theories & Concepts
• Types of research studies
• Types of variables
• MLA style overview
• MLA examples
• MLA citation & referencing
• MLA structure & sections
• Plagiarism overview
• Plagiarism checker
• Types of plagiarism
• Printing production overview
• Research bias overview
• Types of research bias
• Example sections
• Types of research papers
• Research process overview
• Problem statement
• Research proposal
• Research topic
• Statistics overview
• Levels of measurment
• Frequency distribution
• Measures of central tendency
• Measures of variability
• Hypothesis testing
• Parameters & test statistics
• Types of distributions
• Correlation
• Effect size
• Hypothesis testing assumptions
• Types of ANOVAs
• Types of chi-square
• Statistical data
• Statistical models
• Spelling mistakes
• Tips overview
• Academic writing tips
• Dissertation tips
• Sources tips
• Working with sources overview
• Evaluating sources
• Finding sources
• Including sources
• Types of sources

Your Step to Success

Plagiarism Check within 10min

Printing & Binding with 3D Live Preview

How To Write An Abstract

How do you like this article cancel reply.

Save my name, email, and website in this browser for the next time I comment.

Inhaltsverzeichnis

• 1 Definition: Abstract
• 4 Abstract in Different Languages
• 5 Abstract vs. Conclusion
• 6 In a Nutshell

Definition: Abstract

An abstract is a short summary of a research paper. It is not part of the actual text and must be included at the very beginning of your work. It does not show up in the structure and the table of contents of your thesis.

You write an abstract to give a brief account of the most important information relating to the research background, structure, method, data analysis, and results of your research paper. The abstract should not create suspense: Making it very clear early on what your results are will help the reader evaluate the relevance of your paper.

What is an abstract?

An abstract is a short summary written at the beginning of a research paper . It highlights the main ideas of your academic project. Your research methods, data analysis, results plus any background information relating to your research should be included in the abstract.

Why do I need an abstract?

An abstract is nescessary, as it helps the reader to decide whether the results and methods of a particular paper are relevant to them or whether it is worthwhile for them to read the whole paper. It effectively creates the first impression of the thesis or essay. It is also very useful for fellow researchers in the academic community, as they can decide upon first glance whether or not the paper can be useful or relevant to their personal research project.

Where does the abstract belong?

The abstract is to be put at the beginning of your writing project. It should appear between the title page and the table of contents page of the research paper. If you’re writing a thesis with an acknowledgements page, then the abstract is placed after the acknowledgements.

When do I write the abstract?

The abstract should be the very last thing you write during the academic writing process. This is because it is only possible to come up with a precise summary of your work once you have written the whole research paper . Using this same logic, the conclusion should also be one of the very last paragraphs that you write.

How long should an abstract be?

The abstract should be between one third of a page and one full page in length. However, this depends on the length of the paper that you’re writing. For a smaller research paper, 100 words is sufficient. For a bachelor’s thesis, or a master’s thesis, the abstract should be between 1 or 2 pages. But it should definitely not exceed 2 pages!

Tip: Take a look at some abstract examples for inspiration!

What is included in an abstract?

A top-quality abstract will include a brief explanation of the following aspects:

1. Background and purpose 2. Overarching research question 3. Gap in literature and methods used to address the gap in literature 4. Main results of the writing project 5. Interpretation or conclusion of the thesis statement Each of these points should be addressed in only a few sentences.

Is an abstract international?

It doesn’t matter which language you write your abstract in, an English translation of your abstract is often required. The reason for this is so that the results of your research paper can be reviewed by an international audience.

Also useful: What is plagiarism?

How to Write an Abstract: The Content

There is one thing you must understand about how to write an abstract:

The abstract should contain important aspects of the paper, like the

• research question ,
• limitations,
• study design,
• main results,
• main idea or message,
• key interpretations,
• implications,
• and validity (cf. Schnur 2005, as quoted in Theisen 2013: 101).

How to Write an Abstract: Structure

The abstract follows the same structure as your paper:

(cf. Kruse 2007: 186)

How to Write an Abstract: Goal

“An abstract is a very precise summary of your whole paper”

You might have heard the term ‘summary’ referring to an abstract of a research paper (cf. Oertner, St. John, & Thelen 2014: 93). However, do not make the mistake of assuming that an abstract is something rather general. You would be on the wrong track. When asked to write an abstract for your bachelor’s or master’s thesis, you are expected to deliver a very precise summary of your whole paper.

An abstract’s right to exist is founded in its purpose of helping a potential reader to quickly find out if it is worthwhile to read the whole paper (cf. Rossig & Prätsch 2005: 89). For this reason, an abstract has to offer everything the reader needs in order to evaluate the relevance of a research paper for their own work. It is the ultimate way of advertising your research.

You can save yourself a lot of work and trouble if you concentrate on reading the abstracts of published papers first; most papers these days provide abstracts (cf. Oertner, St. John, & Thelen 2014: 80). If you take your time to thoroughly read the abstracts, you will be able to judge whether a particular article will help you to support your line of argumentation. If not, then just move on the next article. You can check out the sample abstracts in this blog entry to get a better idea of how to write an abstract and what an abstract looks like.

“Through reading an abstract, you can find out if a paper arouses your interest or is relevant for your studies.”

How to Write an Abstract: Length 

An abstract is a summary of a publication or an article on one third of a DIN-A4 page (cf. Kruse 2007: 185). Stickel-Wolf & Wolf provide a rough guideline for the word count: They say that an abstract should not contain more than 100 words (cf. 2013: 249).

Note: Generally speaking, an abstract for a bachelor’s or master’s thesis should not exceed one page, and the absolute maximum is two pages (cf. Rossig & Prätsch 2005: 89). The reason for this is self-explanatory: The purpose of the abstract is to offer a quick overview of, for example, a 60- or 80-page paper.

Abstract Example 1: English abstract addressing the main points of your paper

Abstract Example 2: English abstract of a master’s thesis with keywords

Recommended: Harvard Referencing

When to Write the Abstract and Where to Put It

You are probably wondering where the abstract should be placed in your research paper: at the beginning or towards the end? It is common to include the abstract right at the beginning (cf. Rossig & Prätsch 2005: 89; Samac, Prenner, & Schwetz 2009: 56). As we have established, it is a helpful tool for the reader to get an overview of the whole paper as early as possible. It is good to know what will follow. So, it would not be logical to put it at the end, right? Stickel-Wolf and Wolf recommend embedding the abstract in between the title page and the table of contents (cf. 2013: 249).

The next question about ‘How to write an abstract’ is a bit trickier. When is the right time to write the abstract? Given that it is to be added at the very beginning, before the actual text, you might think it is the first thing you are supposed to write. However, you will not be able to write a clear-cut and precise summary at a stage when you do not even know what you are summarizing. Therefore, you can only write the abstract after you have written the whole paper. How else would you know enough about your results to give a complete record of your whole work (cf. Rossig & Prätsch 2005: 89)?

Note: You can draw essential information to write your abstract from your conclusion, as this part briefly repeats the research questions and provides an evaluative summary of the results (cf. Stickel-Wolf 2013: 249).

Abstract in Different Languages

The question of how to write an abstract is popular not just in an English-speaking context.

It increasingly concerns international students as well. Nowadays, it is becoming more and more important to write the whole paper in English, rather than in the native language of the country a student studies in. Indeed, many papers are still written in the native language of the country.

But your research paper not being written in English does not mean that this also holds true for the abstract. Often, the student needs to write an abstract in not only German, Spanish, or French (depending on the country you study in) but also English.

An English abstract (in addition to, say, a German abstract) is necessary to ensure that a research paper will be accessible to an international market.

Sometimes, only an English abstract is required. Also, as Samac, Prenner, and Schwetz point out, an English translation of the German text (if your thesis is in German) must be provided on the very same page to meet international standards (2009: 56).

Example of an abstract in German and English

Note: Academic English is quite a bit different from academic German, Spanish, and other languages. We recommend that you read research papers in English to get a feel for the differences in style and structure (cf. Karmasin & Ribing 2014: 45).

Abstract vs. Conclusion

Caution: The abstract is NEVER a conclusion of your research paper and it differs from the conclusion in many aspects. Make sure to read the sample abstracts provided on this page to get a good grasp on the major differences between the abstract and the conclusion.

Assignment Printing & Binding

You are already done writing your assignment and need a high quality printing & binding service? Then you are right to choose BachelorPrint! Check out our 24-hour online printing service. For more information click the button below :

In a Nutshell

• An abstract is a short summary of a research paper. It is embedded between the title page and the table of contents , and appears before the actual text.
• The abstract should not exceed one page (at the most, two pages). Ideally, it should fit on a single page.
• An abstract is a brief account of your paper. It provides information about the structure, argumentation, method, and results of your research paper (cf. Oertner, St. John, & Thelen 2014: 93).
• The aim of writing an abstract is to make it possible for the reader to quickly evaluate the relevance of your work without having to read much. Also, reading abstracts makes your life easier when you are doing research. You can decide which paper is worth reading and which one is not, just based on the abstract.
• There is a clear difference between the abstract and the conclusion. The abstract is shorter, can be read independently of the text, and does not contain evaluations of the author which are not already part of the text (cf. Kruse 2007: 186).
• Writing an English abstract or providing an English translation of your abstract is becoming increasingly important and popular. In this way, your research can be made internationally accessible.

Works cited

Karmasin, Matthias, & Rainer Ribing. 2014. Die Gestaltung wissenschaftlicher Arbeiten . 8th Edition. Vienna: Facultas.

Kruse, Otto. 2007. Keine Angst vor dem leeren Blatt – Ohne Schreibblockaden durchs Studium . 12th Edition. Frankfurt: Campus.

Oertner, Monika, Illona St. John, & Gabriele Thelen. 2014. Wissenschaftlich Schreiben – Ein Praxisbuch für Schreibtrainer und Studierende. Paderborn: Wilhelm Fink.

Rossig, Wolfram E., & Joachim Prätsch. 2005. Wissenschaftliche Arbeiten . 5th Edition. Weyhe: PRINT-TEC.

Samac, Klaus, Monika Prenner, & Herbert Schwetz. 2009. Die Bachelorarbeit an Universität und Fachhochschule. Vienna: Facultas.

Stickel-Wolf, Christine, & Joachim Wolf. 2013. Wissenschaftliches Arbeiten und Lerntechniken – Erfolgreich studieren – gewusst wie! 7th Edition. Wiesbaden: Springer Gabler.

Theisen, Manuel René. 2013. Wissenschaftliches Arbeiten – Erfolgreich bei Bachelor- und Masterarbeit . Munich: Franz Vahlen.

We use cookies on our website. Some of them are essential, while others help us to improve this website and your experience.

• External Media

Individual Privacy Preferences

Cookie Details Privacy Policy Imprint

Here you will find an overview of all cookies used. You can give your consent to whole categories or display further information and select certain cookies.

Accept all Save

Essential cookies enable basic functions and are necessary for the proper function of the website.

Show Cookie Information Hide Cookie Information

Statistics cookies collect information anonymously. This information helps us to understand how our visitors use our website.

Content from video platforms and social media platforms is blocked by default. If External Media cookies are accepted, access to those contents no longer requires manual consent.

Privacy Policy Imprint

How to write a fantastic thesis introduction (+15 examples)

The thesis introduction, usually chapter 1, is one of the most important chapters of a thesis. It sets the scene. It previews key arguments and findings. And it helps the reader to understand the structure of the thesis. In short, a lot is riding on this first chapter. With the following tips, you can write a powerful thesis introduction.

Disclosure: This post may contain affiliate links, which means I may earn a small commission if you make a purchase using the links below at no additional cost to you . I only recommend products or services that I truly believe can benefit my audience. As always, my opinions are my own.

Elements of a fantastic thesis introduction

Open with a (personal) story, begin with a problem, define a clear research gap, describe the scientific relevance of the thesis, describe the societal relevance of the thesis, write down the thesis’ core claim in 1-2 sentences, support your argument with sufficient evidence, consider possible objections, address the empirical research context, give a taste of the thesis’ empirical analysis, hint at the practical implications of the research, provide a reading guide, briefly summarise all chapters to come, design a figure illustrating the thesis structure.

An introductory chapter plays an integral part in every thesis. The first chapter has to include quite a lot of information to contextualise the research. At the same time, a good thesis introduction is not too long, but clear and to the point.

A powerful thesis introduction does the following:

• It captures the reader’s attention.
• It presents a clear research gap and emphasises the thesis’ relevance.
• It provides a compelling argument.
• It previews the research findings.
• It explains the structure of the thesis.

In addition, a powerful thesis introduction is well-written, logically structured, and free of grammar and spelling errors. Reputable thesis editors can elevate the quality of your introduction to the next level. If you are in search of a trustworthy thesis or dissertation editor who upholds high-quality standards and offers efficient turnaround times, I recommend the professional thesis and dissertation editing service provided by Editage . 

This list can feel quite overwhelming. However, with some easy tips and tricks, you can accomplish all these goals in your thesis introduction. (And if you struggle with finding the right wording, have a look at academic key phrases for introductions .)

Ways to capture the reader’s attention

A powerful thesis introduction should spark the reader’s interest on the first pages. A reader should be enticed to continue reading! There are three common ways to capture the reader’s attention.

An established way to capture the reader’s attention in a thesis introduction is by starting with a story. Regardless of how abstract and ‘scientific’ the actual thesis content is, it can be useful to ease the reader into the topic with a short story.

This story can be, for instance, based on one of your study participants. It can also be a very personal account of one of your own experiences, which drew you to study the thesis topic in the first place.

Start by providing data or statistics

Data and statistics are another established way to immediately draw in your reader. Especially surprising or shocking numbers can highlight the importance of a thesis topic in the first few sentences!

So if your thesis topic lends itself to being kick-started with data or statistics, you are in for a quick and easy way to write a memorable thesis introduction.

The third established way to capture the reader’s attention is by starting with the problem that underlies your thesis. It is advisable to keep the problem simple. A few sentences at the start of the chapter should suffice.

Usually, at a later stage in the introductory chapter, it is common to go more in-depth, describing the research problem (and its scientific and societal relevance) in more detail.

You may also like: Minimalist writing for a better thesis

Emphasising the thesis’ relevance

A good thesis is a relevant thesis. No one wants to read about a concept that has already been explored hundreds of times, or that no one cares about.

Of course, a thesis heavily relies on the work of other scholars. However, each thesis is – and should be – unique. If you want to write a fantastic thesis introduction, your job is to point out this uniqueness!

In academic research, a research gap signifies a research area or research question that has not been explored yet, that has been insufficiently explored, or whose insights and findings are outdated.

Every thesis needs a crystal-clear research gap. Spell it out instead of letting your reader figure out why your thesis is relevant.

* This example has been taken from an actual academic paper on toxic behaviour in online games: Liu, J. and Agur, C. (2022). “After All, They Don’t Know Me” Exploring the Psychological Mechanisms of Toxic Behavior in Online Games. Games and Culture 1–24, DOI: 10.1177/15554120221115397

The scientific relevance of a thesis highlights the importance of your work in terms of advancing theoretical insights on a topic. You can think of this part as your contribution to the (international) academic literature.

Scientific relevance comes in different forms. For instance, you can critically assess a prominent theory explaining a specific phenomenon. Maybe something is missing? Or you can develop a novel framework that combines different frameworks used by other scholars. Or you can draw attention to the context-specific nature of a phenomenon that is discussed in the international literature.

The societal relevance of a thesis highlights the importance of your research in more practical terms. You can think of this part as your contribution beyond theoretical insights and academic publications.

Why are your insights useful? Who can benefit from your insights? How can your insights improve existing practices?

Formulating a compelling argument

Arguments are sets of reasons supporting an idea, which – in academia – often integrate theoretical and empirical insights. Think of an argument as an umbrella statement, or core claim. It should be no longer than one or two sentences.

Including an argument in the introduction of your thesis may seem counterintuitive. After all, the reader will be introduced to your core claim before reading all the chapters of your thesis that led you to this claim in the first place.

But rest assured: A clear argument at the start of your thesis introduction is a sign of a good thesis. It works like a movie teaser to generate interest. And it helps the reader to follow your subsequent line of argumentation.

The core claim of your thesis should be accompanied by sufficient evidence. This does not mean that you have to write 10 pages about your results at this point.

However, you do need to show the reader that your claim is credible and legitimate because of the work you have done.

A good argument already anticipates possible objections. Not everyone will agree with your core claim. Therefore, it is smart to think ahead. What criticism can you expect?

Think about reasons or opposing positions that people can come up with to disagree with your claim. Then, try to address them head-on.

Providing a captivating preview of findings

Similar to presenting a compelling argument, a fantastic thesis introduction also previews some of the findings. When reading an introduction, the reader wants to learn a bit more about the research context. Furthermore, a reader should get a taste of the type of analysis that will be conducted. And lastly, a hint at the practical implications of the findings encourages the reader to read until the end.

If you focus on a specific empirical context, make sure to provide some information about it. The empirical context could be, for instance, a country, an island, a school or city. Make sure the reader understands why you chose this context for your research, and why it fits to your research objective.

If you did all your research in a lab, this section is obviously irrelevant. However, in that case you should explain the setup of your experiment, etcetera.

The empirical part of your thesis centers around the collection and analysis of information. What information, and what evidence, did you generate? And what are some of the key findings?

For instance, you can provide a short summary of the different research methods that you used to collect data. Followed by a short overview of how you analysed this data, and some of the key findings. The reader needs to understand why your empirical analysis is worth reading.

You already highlighted the practical relevance of your thesis in the introductory chapter. However, you should also provide a preview of some of the practical implications that you will develop in your thesis based on your findings.

Presenting a crystal clear thesis structure

A fantastic thesis introduction helps the reader to understand the structure and logic of your whole thesis. This is probably the easiest part to write in a thesis introduction. However, this part can be best written at the very end, once everything else is ready.

A reading guide is an essential part in a thesis introduction! Usually, the reading guide can be found toward the end of the introductory chapter.

The reading guide basically tells the reader what to expect in the chapters to come.

In a longer thesis, such as a PhD thesis, it can be smart to provide a summary of each chapter to come. Think of a paragraph for each chapter, almost in the form of an abstract.

For shorter theses, which also have a shorter introduction, this step is not necessary.

Especially for longer theses, it tends to be a good idea to design a simple figure that illustrates the structure of your thesis. It helps the reader to better grasp the logic of your thesis.

Get new content delivered directly to your inbox!

Subscribe and receive Master Academia's quarterly newsletter.

The most useful academic social networking sites for PhD students

10 reasons not to do a master's degree, related articles.

5 inspiring PhD thesis acknowledgement examples

The top 10 thesis defense questions (+ how to prepare strong answers)

Left your dissertation too late? Ways to take action now

Theoretical vs. conceptual frameworks: Simple definitions and an overview of key differences

Daniel Guggenheim School of Aerospace Engineering

College of engineering, master's thesis defense: anna gulan.

Location URL

Master's Thesis Defense

(Advisor: Prof. Mavris)

"Conceptual, Trajectory-Based Structural Sizing Method for Hypersonic Glide Vehicles"

Monday, April 22

Collaborative Visualization Environment (CoVE)

Weber Space and Technology Building (SST II)

Microsoft Teams

In recent years, interest in hypersonic vehicles has rapidly developed resulting in an increase in hypersonic research and funding. This push is motivated by the hope that hypersonic vehicles will improve mission performance including velocity, range, and maneuverability. These vehicles are considered highly sensitive to weight though the specific relationship between weight and performance of hypersonic glide vehicles has not been well defined. The first research question will explore this relationship assessing the effects mass on performance parameters including terminal velocity, range, heat load, and mission time. The maximum heat load and terminal velocity were found to be the most sensitive to mass changes and when maneuvers are included in the flight path the total distance becomes increasingly more sensitive to mass.

During the conceptual design phase, engineers rely on weight estimations to ensure the vehicle will meet performance requirements. Current launch weight estimations typically rely on historical regressions. While useful, these regressions are outdated as they do not incorporate hypersonic vehicles and novel technology. This practice results in several gaps as the regressions lack background context reducing opportunities for pinpointing the driving loads and optimization. Additionally, they do not rely on the trajectory or performance parameters of the specific mission requirements. The second research question seeks to address these gaps by introducing a trajectory-based sizing tool to be utilized early in the design process. This tool will produce a more accurate initial weight estimation capable of identifying driving weight parameters. The results showed that for most cases the external pressure was the driving loading condition with the secondary driver being buckling due to bending moment. The peak load typically occurred in the terminal phase during the final dive. Additionally, the sensitivity of structural sizing by aerodynamic parameters was assessed. It was found that the initial height, terminal flight path angle, mission time, and range were the most significant contributors.

When traveling at hypersonic speeds, the load bearing structure will experience high temperatures. These temperatures are caused by both surface heat transfer and skin friction heating. This thermal energy heats the vehicle structure and causes material strength degradation. To reduce this effect a robust thermal protection system (TPS) is needed to shield the structure from the intense thermal energy. The TPS is typically sized to ensure the structural material does not heat beyond its maximum allowable temperature but could be increased in size to reduce the temperature felt by the structure. In attempt to explore the relationship between structural heating and strength degradation, the third research question will explore this relationship and the structural weight reduction that will occur from a reduced operating temperature. The model found that the structural weight increased exponentially with increasing temperature.

·         Prof. Dimitri Mavris – School of Aerospace Engineering (advisor)

·         Dr. Adam Cox– School of Aerospace Engineering

·         Dr. Kenneth Decker – SpaceWorks Enterprise